Reliability Analysis of Satellite Turntable System under Multiple Operation Modes Based on Multi-Valued Decision Diagrams

As a payload support system deployed on satellites,the turntable system is often switched among different working modes during the on-orbit operation,which can experience great state changes.In each mode,the missions to be completed are different,consecutive and non-over-lapping,from which the turntable system can be considered to be a phased-mission system(PMS).Reliability analysis for PMS has been widely studied.However,the system mode cycle characteristic has not been taken into account before.In this paper,reliability analysis method of the satellite turntable system is proposed considering its multiple operation modes and mode cycle characteristic.Firstly,the multi-valued decision diagrams(MDD)manipulation rules between two adjacent mission cycles are proposed.On this basis,MDD models for the turntable system in different states are established and the reliability is calculated using the continuous time Markov chains(CTMC)method.Finally,the comparative study is carried out to show the effectiveness of our proposed method.

Load-induced error identification of hydrostatic turntable and its influence on machining accuracy

In heavy duty machine tools, hydrostatic turntable is often used as a means for providing rotational motion and supporting workpiece, so the accuracy of turntable is crucial for part machining. In order to analyze the influence of load-indcued errors on machining accuracy, an identification model of load-induced errors based on the deformation caused by applied load of hydrostatic turntable of computerized numerical control(CNC) gantry milling heavy machine is proposed. Based on multi-body system theory and screw theory, the space machining accuracy model of heavy duty machine tool is established with consideration of identified load-induced errors. And then, the influence of load-induced errors on space machining accuracy and the roundness error of a milled hole is analyzed. The analysis results show that load-induced errors have a big influence on the roundness error of machined hole, especially when the center of the milled hole is far from that of hydrostatic turntable.

Fault detection of switched linear systems with its application to turntable systems

This paper is concerned with the H∞ fault detection for continuous-time linear switched systems with its application to turntable systems.The solvability condition for a desired filter is established based on the proposed sufficient condition.Based on the double channel scheme of the turntable control system,the turntable system can be modeled as a switched system.Finally,by taking the turntable system as a numerical example,the effectiveness of the proposed theory is well validated.

Coupling Analysis of Moment of Inertia & Dynamic on Optoelectronic Tracking Turntable

With photoelectric tracking system as the research object,based on the theorem of moment of momentum and Euler dynamic equation,Nonlinear biaxial coupling dynamic model of tracking turntable is established.Effects of moment of inertia coupling,speed coupling and the dynamic coupling between tracking turntable shafts were studied,the analytical relation between them was given in theory.Verify the change trend of theoretical model.And it provides the theory reference and model base,for the future design of the high precision tracking controller And control parameter selection and optimization.In the end,specific measures are made for structure optimization.

An Investigation into the Influence of the Airflow Path on the Convective Heat Transfer for an Eddy Current Retarder Turntable

In order to improve the convective heat transfer relating to an eddy current retarder,the finite element model has been used to assess the performances of different possible designs.In particular,assuming the steady running state of retarder as the working condition,flow and temperature fields have been obtained for the rotor.The influence of airflow path on heat dissipation has been analysed,and the influence of the temperature field distribution on the performance of retarder has been discussed accordingly.The results show that when the steady running state of the turntable is considered,the maximum temperature is lower,the level of turbulence flow is mitigated,and the temperature distribution becomes more regular.These factors contribute to improve the heat dissipation ability of the retarder.

USB Turntable

USB周边设备可谓无其不有，这部USB-Turntable除了具有USB即插即用的特性．还可以让我们通过电脑来播放33／45转的黑胶唱片．同时如果你喜欢．可以将唱片音乐通过附带的软件轻松地保存到你的电脑上。如果你还保存着心爱的黑胶唱片．真的可以买来试试。

Analysis and Research on the Load of the Box Girder Locomotive Turntable

The locomotive turntable is an essential device for the steering operation of the railway locomotive. This paper has introduced the structural composition and characteristics of the box girder locomotive turntable, has ana- lyzed its vertical load, horizontal load and torsional load, and has established a mechanical model for the symmet- rical structure of the box girder locomotive turntable under the action of positive and negative symmetric vertical loads. Furthermore, it has also demonstrated the safe and reliable structural performance of this type of locomotive turntable on the basis of the practical example of a 35 m box girder locomotive turntable.

Novel attitude determination method by integration of electronic level meter,INS,and low-cost turntable for level attitude evaluation and calibration of INS

Attitude references are greatly needed for the evaluation and calibration of Inertial Navigation Systems(INSs),which are widely used in gravimeter,marine,and aeronautical navigation.High-accuracy turntable,INS,and Global Navigation Satellite System have been utilized to verify the performance of relatively low-accuracy INS.The accuracy requirement of the attitude reference continuously increases with the rapid improvement of inertial sensors and navigation algorithms.However,the cost of attitude determination system increases rapidly with the increase of attitude accuracy requirement.To solve this limitation,the integration of level meter,INS,and low-cost turntable is proposed to provide level attitude,such as roll and pitch.The turntable is utilized to rotate the INS.An integration model of the level meter and INS is built to estimate the level attitude and reduce the cost of the turntable.The proposed method successfully avoids the dependence on high-accuracy turntables.An observability degree analysis is conducted to improve the level atti-tude accuracy further.The simulation and turntable test results indicate that the proposed method can provide high-accuracy level attitude without high-accuracy INS or turntable and is applicable to error calibration and attitude evaluation of INS.

EFFECTS OF SLOPING BOTTOM ON THE DEEPCROSS-EQUATORIAL BOUNDARY CURRENT

This paper reports study focusing on the effects of sloping bottom on the deep cross-equatorial boundary current, and discusses model and laboratory experiment results showing that the southward that the southward intrusion distance and flow speed of the western boundary current depend on the bottom slope variation rate,the difference between and and are the current thickness at eastward edge and westward edge, respectively), and the net mass transport.

Numerical Modeling of a New Flight Simulator Enabling Continuous 360⁃Degree Spinning and Translational Motion

This paper presents a new nine⁃degree⁃of⁃freedom parallel mechanism,which can be applied as a flight simulator.The mechanism is composed by Stewart turntable and another three⁃axis turntable.The Stewart platform can realize six⁃degree⁃of⁃freedom movement in space,but the working space is limited.After the three⁃axis turntable is installed,the rotation space can be increased to simulate more realistic flight conditions.This paper analyzes the new flight simulator from kinematics and dynamics aspects.In addition,the flight simulator is simulated and analyzed based on the MATLAB/Simulink simulation system.The results obtained from the numerical simulations is planned to be used for the practical manufacturing and applications of the new platform.