Fluorinated semi-interpenetrating polymer networks for enhancing the mechanical performance and storage stability of polymer-bonded explosives by controlling curing and phase separation rates

Herein, the effect of fluoropolymer binders on the properties of polymer-bonded explosives(PBXs) was comprehensively investigated. To this end, fluorinated semi-interpenetrating polymer networks(semiIPNs) were prepared using different catalyst amounts(denoted as F23-CLF-30-D). The involved curing and phase separation processes were monitored using Fourier-transform infrared spectroscopy, differential scanning calorimetry, a haze meter and a rheometer. Curing rate constant and activation energy were calculated using a theoretical model and numerical method, respectively. Results revealed that owing to its co-continuous micro-phase separation structure, the F23-CLF-30-D3 semi-IPN exhibited considerably higher tensile strength and elongation at break than pure fluororubber F2314 and the F23-CLF-30-D0 semi-IPN because the phase separation and curing rates matched in the initial stage of curing.An arc Brazilian test revealed that F23-CLF-30-D-based composites used as mock materials for PBXs exhibited excellent mechanical performance and storage stability. Thus, the matched curing and phase separation rates play a crucial role during the fabrication of high-performance semi-IPNs;these factors can be feasibly controlled using an appropriate catalyst amount.

Physical information-enhanced graph neural network for predicting phase separation

Although phase separation is a ubiquitous phenomenon, the interactions between multiple components make it difficult to accurately model and predict. In recent years, machine learning has been widely used in physics simulations. Here,we present a physical information-enhanced graph neural network(PIENet) to simulate and predict the evolution of phase separation. The accuracy of our model in predicting particle positions is improved by 40.3% and 51.77% compared with CNN and SVM respectively. Moreover, we design an order parameter based on local density to measure the evolution of phase separation and analyze the systematic changes with different repulsion coefficients and different Schmidt numbers.The results demonstrate that our model can achieve long-term accurate predictions of order parameters without requiring complex handcrafted features. These results prove that graph neural networks can become new tools and methods for predicting the structure and properties of complex physical systems.

A Cu-Pd alloy catalyst with partial phase separation for the electrochemical CO_(2) reduction reaction

Cu catalysts can convert CO_(2) through an electrochemical reduction reaction into a variety of useful carbon-based products.However,this capability provides an obstacle to increasing the selectivity for a single product.Herein,we report a simple fabrication method for a Cu-Pd alloy catalyst for use in a membrane electrode assembly(MEA)-based CO_(2) electrolyzer for the electrochemical CO_(2) reduction reaction(ECRR)with high selectivity for CO production.When the composition of the Cu-Pd alloy catalyst was fabricated at 6:4,the selectivity for CO increased and the production of multi-carbon compounds and hydrogen is suppressed.Introducing a Cu-Pd alloy catalyst with 6:4 ratio as the cathode of the MEAbased CO_(2) electrolyzer showed a CO faradaic efficiency of 92.8%at 2.4 V_(cell).We assumed that these results contributed from the crystal planes on the surface of the Cu-Pd alloy.The phases of the Cu-Pd alloy catalyst were partially separated through annealing to fabricate a catalyst with high selectivity for CO at low voltage and C_(2)H_4 at high voltage.The results of CO-stripping testing confirmed that when Cu partially separates from the lattice of the Cu-Pd alloy,the desorption of~*CO is suppressed,suggesting that C-C coupling reaction is favored.

TIR domain protein-mediated phase separation activates plant immunity

We spotlight recent findings from a Nature paper unveiling captivating insights into how substrates such as NADþand ATP stimulate the condensation of TIR domain proteins.This process culminates in the formation of a quaternary structural pattern akin to the catalytic arrangement observed in conventional TNL proteins.Consequently,this mechanism enables the production of pivotal signaling molecules crucial for fortifying plant immunity.Expanding on these revelations,we propose the prospect of creating modulatory compounds capable of initiating the phase separation of TIR domain proteins as an innovative approach to enhance plant immunity against pathogenic challenges.

Separation Properties of a New Polysiloxane-Anchored β-Cyclodextrin Derivative as Gas Chromatography Stationary Phase

A new capillary gas chromatography stationary phase, monokis (2,6 di O benzyl 3 O propyl (3’)) hexakis(2,6 di O benzyl 3 O methyl) β CD bonded polysiloxane, was synthesized. It exhibited separation abilities to disubstituted benzene isomers and some chiral solutes. It was also found that the polarity of CD derivatives can be lowered both by chemically bonding it to polysiloxane and by diluting it in polysiloxane. The separation abilities of the polysiloxane anchored CDs (SP CD) are higher than that of the unbonded CDs (S CD) and the diluted S CD at lower column temperature. Hydrosilylation reaction is one of the best methods to lower the operating temperature of CDs.

Time-resolved photoluminescence of anatase/rutile TiO_2 phase junction revealing charge separation dynamics

Junctions are an important structure that allows charge separation in solar cells and photocatalysts. Here, we studied the charge transfer at an anatase/rutile TiO2 phase junction using time-resolved photoluminescence spectroscopy. Visible （-S00 nm） and near-infrared （NIR, -830 nm） emissions were monitored to give insight into the photoinduced charges of anatase and rutile in the junction, respectively, New fast photoluminescence decay components appeared in the visible emission of futile-phase dominated TiO2 and in the NIR emission of many mixed phase TiO2samples. The fast decays confirmed that the charge separation occurred at the phase junction. The visible emission intensity from the mixed phase TiO2 increased, revealing that charge transfer from rutile to anatase was the main pathway. The charge separation slowed the microsecond time scale photolumines- cence decay rate for charge carriers in both anatase and rutile. However, the millisecond decay of the charge carriers in anatase TiO2 was accelerated, while there was almost no change in the charge carrier dynamics of rutile TiO2. Thus, charge separation at the anatase/rutile phase junction caused an increase in the charge carrier concentration on a microsecond time scale, because of slower electron-hole recombination. The enhanced photocatalytic activity previously observed at ana- tase/rutile phase junctions is likely caused by the improved charge carrier dynamics we report here. These findings may contribute to the development of improved photocatalytic materials.

Phase separation and transcriptional regulation in cancer development

Liquid-liquid phase separation,a novel biochemical phenomenon,has been increasingly studied for its medical applications.It underlies the formation of membrane-less organelles and is involved in many cellular and biological processes.During transcriptional regulation,dynamic condensates are formed through interactions between transcriptional elements,such as transcription factors,coactivators,and mediators.Cancer is a disease characterized by uncontrolled cell proliferation,but the precise mechanisms underlying tumorigenesis often remain to be elucidated.Emerging evidence has linked abnormal transcriptional condensates to several diseases,especially cancer,implying that phase separation plays an important role in tumorigenesis.Condensates formed by phase separation may have an effect on gene transcription in tumors.In the present review,we focus on the correlation between phase separation and transcriptional regulation,as well as how this phenomenon contributes to cancer development.

Magnetically induced phase separation in the fcc phase and thermodynamic calculations of phase equilibria of the Co-Cr system

Two-phase equilibria between the ferromagnetic fcc and the paramagnetic fcc phase from 800 ℃ to 900 ℃ in the Co-rich region have been detected by the diffusion couple technique. Two phase separation region of the fcc has been confirmed along the Curie temperature.The phase equilibria including the present results and the thermodynamic data of the Co-Cr system reported in the literature were analyzed on the basis of the thermodynamic evaluation. A set of thermodynamic values for the liquid, fcc, hcp, bcc, sigma phases was obtained. The calculated phase equilibria were in good agreement with most of the experimental data.

Multiple roles of arsenic compounds in phase separation and membraneless organelles formation determine their therapeutic efficacy in tumors

Arsenic compounds are widely used for the therapeutic intervention of multiple diseases.Ancient pharmacologists discovered the medicinal utility of these highly toxic substances,and modern pharmacologists have further recognized the specific active ingredients in human diseases.In particular,Arsenic trioxide(ATO),as a main component,has therapeutic effects on various tumors(including leukemia,hepatocellular carcinoma,lung cancer,etc.).However,its toxicity limits its efficacy,and controlling the toxicity has been an important issue.Interestingly,recent evidence has pointed out the pivotal roles of arsenic compounds in phase separation and membraneless organelles formation,which may determine their toxicity and therapeutic efficacy.Here,we summarize the arsenic compoundsregulating phase separation and membraneless organelles formation.We further hypothesize their potential involvement in the therapy and toxicity of arsenic compounds,highlighting potential mechanisms underlying the clinical application of arsenic compounds.

Enhancement of vertical phase separation in sequentially deposited organic photovoltaics through the independent processing of additives

Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.

Numerical Simulation Study of Oil-Water Emulsion Separation in an Ultrasonic Field:Effect of Coupling between Acoustic and Flow Field Parameters

In this study,the separation and coalescence of oil-in-water emulsions are explored in an ultrasonic field using the lattice Boltzmann method.By simulating the propagation of ultrasonic waves,this study focuses on examining the effects of acoustic wave frequency,the ratio of oil to water components,and the aspect ratio of the boundary on the emulsification and separation processes of oil-water mixtures.The following conclusions are drawn.①Frequency affects the speed of oil droplet separation,leading to an increase in droplet size over time.Larger droplets are found near the source,while smaller droplets are distributed throughout the wave web.②As the boundary aspect ratio increases,the emulsification efficiency of the droplets weakens,and the system takes longer to stabilize.③Emulsions with a higher component of oil can better resist acoustic waves.④At the same acoustic frequency,longer wavelength ultrasonic fields promote the formation of uniformly distributed,smaller oil droplets,which is beneficial to the storage of emulsions.These numerical simulation results offer insights for optimizing conditions for oil-in-water separation and serve as a numerical reference for the study of oil-in-water emulsion separation in ultrasonic environments.

Dynamic scaling behaviour of late-stage phase separation in Ni75AlxV25-x alloys

The dynamic scaling behaviour of late-stage phase separation and coarsening mechanisms of L12 and D022 in Ni75AlxV25-x （3 ≤ x ≤ 10, at.%） alloys are studied using the microscopic phase-field dynamic model. The microelaso ticity field is incorporated into the diffusion dynamic model. The results show the morphology and coarsening dynamics being greatly changed by the elastic interactions among different precipitates, the particles aligning along the dominant directions, the average domain size （ADS） of L12 and D022 deviating from the exponent of temporal power-law, and the growth slowing down due to the increasing of elastic interactions. The dynamic scaling regime of late-stage coarsening of the precipitates is attained. Thus the scaling behaviour of structure function is also applicable for elastic interaction systems. It is also found that the variations of ADS and scaling function depend on the volume fraction of precipitates.

COMPUTER SIMULATION OF PHASE SEPARATION IN CaO-MgO-Fe_2O_3-Al_2O_3-SiO_2 GLASS

The fractal and spinodal decomposition models combined Monte Carlo method were used in computer simulation of phase separation from CaO MgO Fe 2O 3 Al 2O 3 SiO 2 glass. The fractal dimension was applied to quantitative analysis. The mechanism of phase separation was investigated. The results showed that the fractal dimensions and simulated micrographs of phase separation were in good agreement with the experimental results. And the mechanism of phase separation was spinodal decomposition.

FRACTAL BEHAVIOR OF DEVELOPMENT OF PHASE SEPARATION AND CRYSTALLIZATION IN BLENDS OF NYLON-6 WITH SODIUM SALT OF ETHYLENE /METHACRYLIC ACID COPOLYMER

Phase separation was studied by the optical microscopy in blends of nylon 6 (PA6) with sodium salt of ethylene/methacrylic acid copolymer (PEMA).The image collecting technology was used to keep track of the development of blends at a certain temperature.The fractal dimension of phase separation was calculated by the image solving technology according to the fractal theory and the self similarity behavior of the process was proved.The relationship of the fractal behavior with composition and experimental temperature was discussed.The fractal behavior of the crystallization development of the crystal phase of PA6 in blends was also discussed and the fractal behavior calculated.

Phase separation in solvent extraction of cobalt from acidic sulfate solution using synergistic mixture containing dinonylnaphthalene sulfonic acid and 2-ethylhexyl 4-pyridinecarboxylate ester

Phase separation rate is a critical character in determining the usefulness of a solvent extraction system in hydrometallurgy. A survey of the synergistic mixture containing dinonylnaphthalene sulfonic acid (HDNNS) and 2-ethylhexly 4-pyridinecarboxylate ester (4PC) for the extraction of cobalt from acidic single metal sulfate solution was carried out to suggest how the physicochemical properties and the morphology of the reverse micelles in the loaded organic phase affect the phase separation. The results show that effective parameters affecting the phase separation are the viscosity and the excess water uptake of the loaded organic phase. It is obvious that the specific settling rate (SSR) decreases with the apparent increase of these two parameters. The measurement of small angle X-ray scattering (SAXS) proves that the morphology of the reversed micelles in the loaded organic phase changes evidently with the change of the specific settling rate (SSR).

PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL)COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

High density polyethylene （HDPE）/polyethylene-block-poly（ethylene glycol） （PE-b-PEG） blend porous membranes were prepared via thermally induced phase separation （TIPS） process using diphenyl ether （DPE） as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry （DSC）. By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy （SEM） and wide angle X-ray diffraction （WAXD）. The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection （FTIR-ATR） and X-ray photoelectron spectroscopy （XPS）. Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.

Starch-g-poly (vinyl alcohol) as Compatibilizer for Reducing the Phase Separation Rates of Polyvinyl Alcohol/Cornstarch Pastes

Starch- g-poly(vinyl alcohol) as a compatibilizing agent for reducing the phase separation rates of polyvinyl alcohol/starch pastes has been investigated by blending and dissolving the two polymers in distilled water. The separation rates were quantitatively evaluated by the term of initiul demixing time. The grafted starches, with a series of grafting ratios, were prepared by grafting a number of vinyl acetate onto granular cornstarch in aqueous dispersion and then alcoholating in methanol. It was found that the addition of small amounts of starch- g poly (vinyl alcohol ) in the size compositions can effectively decrease the separation rates of the blended pastes in comparison to pure starch/PVA ones.Moreover, the influence of the grafting ratio, starch content, and PVA variety on the separation rates was also studied.

Effects of Ni addition on liquid phase separation and giant magnetoresistance of Cu-Co alloys

The effects of Ni addition on the liquid phase separation and giant magnetoresi stance (GMR) of Cu Co alloys were discussed. The results reveal that Ni additio n can partially restrain the liquid phase separation of Cu Co alloys, resultin g in a decrease of volume fraction for the Co rich particles separated from the liquid phase and in refined microstructures. The composition analyses indicate t hat Ni is dissolved in both the Co rich and the Cu rich phases, but Ni content in the Co rich phase is much higher than that in the Cu matrix. At the same ti me, Ni addition enhance the solubility between Cu and Co, especially Cu in Co s olid solution. Ni alloying into Cu Co alloys can fully prevent the liquid phase separation during melt spinning, which is very beneficial to improve GMR of Cu Co alloys.

Microstructure evolution and liquid phase separation in Ta-O hypermonotectic melts during laser-cladding

A three-layer Ta_2O_5-containing coating was successfully fabricated by laser cladding on a pure Ta substrate. The maximum thickness of such a coating is about 1.6 mm. The microstructure, phase constitution and elemental distribution in the coating were investigated. Results show that the coating has been metallurgically bonded to the Ta substrate and the microstructure exhibits a graded change along the deposition direction from Ta substrate to the top of coating. In the layers I and II of the graded coating, the microstructure evolution can be confi rmed as a result of hypomonotectic reaction, but in the layer Ⅲ it was formed by hypermonotectic reaction. At the top of coating, the microstructure was still homogeneous although liquid phase separation had occurred, which can be attributed to the fact that the O-rich droplets do not have enough time to fl oat at high cooling rate. The theoretical calculation results show that during laser cladding, the solidifi cation time of the melt pool was less than 0.1 s, which fi ts well with the results from the experiment.

Synergistic action of non-solvent induced phase separation in preparation of poly(vinyl butyral) hollow fiber membrane via thermally induced phase separation

A systematic study of air gap distance effects on the structure and properties of poly(vinyl butyral)hollow fiber membrane via thermally induced phase separation(TIPS)has been carried out.The results show that the hollow fiber membrane prepared at air gap zero has no skin layer; the pore size near the outer surface is larger than that near the inner surface; and the special pore channel-like structure near the outer surface is formed,which is quite different with the typical sponge-like structure caused by TIPS and the finger-like structure caused by non-solvent induced phase separation(NIPS),because of the synergistic action of non-solvent induced phase separation at air gap zero.The pore size gradually decreases from outer surface layer to the intermediate layer,but increases gradually from intermediate layer to the inner surface layer.With the increase of air gap distance,the pore size near the outer surface gets smaller and a dense skin layer is formed,and the pore size gradually increases from the outer surface layer to the inner surface layer.Water permeability of the hollow fiber membrane decreases with air gap distance,the water permeability decreases sharply from 45.50×10-7 to 4.52×10-7 m3/(m2·s·kPa)as air gap increases from 0 to 10 mm at take-up speed of 0.236 m/s,further decreases from 4.52×10-7 to 1.00×10-8 m3/(m2·s·kPa)as the air gap increases from 10 to 40 mm.Both the breaking strength and the elongation increase with the increase of air gap distance.The breaking strength increases from 2.25 MPa to 4.19 MPa and the elongation increases from 33.9% to 132.6% as air gap increases from 0 mm to 40 mm at take-up speed 0.236 m/s.