As dense seismic arrays at different scales are deployed,the techniques to make full use of array data with low computing cost become increasingly needed.The wave gradiometry method(WGM)is a new branch in seismic tomo...As dense seismic arrays at different scales are deployed,the techniques to make full use of array data with low computing cost become increasingly needed.The wave gradiometry method(WGM)is a new branch in seismic tomography,which utilizes the spatial gradients of the wavefield to determine the phase velocity,wave propagation direction,geometrical spreading,and radiation pattern.Seismic wave propagation parameters obtained using the WGM can be further applied to invert 3D velocity models,Q values,and anisotropy at lithospheric(crust and/or mantle)and smaller scales(e.g.,industrial oilfield or fault zone).Herein,we review the theoretical foundation,technical development,and major applications of the WGM,and compared the WGM with other commonly used major array imaging methods.Future development of the WGM is also discussed.展开更多
An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal...An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.展开更多
Presents a new way of elastic wave imaging which features 1)high inversion accuracy; 2)stable and rapid convergence; 3) high resistance to random noise; 4) little dependence on initial values, and concludes with numer...Presents a new way of elastic wave imaging which features 1)high inversion accuracy; 2)stable and rapid convergence; 3) high resistance to random noise; 4) little dependence on initial values, and concludes with numerical results that this method has many advantages over all the other imaging methods because our inversion equation following the variation principle reflects the relation between the little variation of scattering field and that of perturbation function.展开更多
A quasi-optical dielectric lens used for W-band focal plane array passive imaging has been developed. The imaging system requires the lens to form beam spot with 3 dB width less than 35 mm at distance of 3500 mm. The ...A quasi-optical dielectric lens used for W-band focal plane array passive imaging has been developed. The imaging system requires the lens to form beam spot with 3 dB width less than 35 mm at distance of 3500 mm. The powerful optical design software ZEMAX was utilized to design the contours of the lens, and numerical method based on ray tracing and Huygens’ Principle was processed to verify the design result. Measurement result shows that the 3 dB width of the beam spot formed by the lens is 34 mm at distance of 3460 mm, and the beam pattern on imaging plane are equally arranged and the intensity decreases only 0.55 dB while the object lateral deviation increases to 300 mm.展开更多
It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the ...It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the propagation characteristics of elastic wave in layered medium with different elastic parameters are discussed using dynamic analysis of finite element method. It is known that the S-wave velocity, density and thickness of layer are related to the properties of the elastic wave including waveform characteristics, spectral characteristics and time-frequency characteristics. We pay special attention to the structure with low velocity interlayer. The impact imaging method is applied to the grouting construction of the immersed tube tunnel. Data acquisition and analytical method are introduced in detail. The grouting effects can be qualitatively evaluated by comparing the characteristics of elastic wave before grouting with those after grouting. Finally, a quantitative evaluation is obtained according to the relationship between energy response of elastic wave and impedance ratio.展开更多
A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary c...A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.展开更多
A numerical model is developed to simulate fully nonlinear extreme waves in finite and infinite water-depth wave tanks. A semi-mixed Enlerian-Lagrangian formulation is adopted and a higher-order boundary element metho...A numerical model is developed to simulate fully nonlinear extreme waves in finite and infinite water-depth wave tanks. A semi-mixed Enlerian-Lagrangian formulation is adopted and a higher-order boundary element method in conjunction with an image Green function is used for the fluid domain. The botmdary values on the free surface are updated at each time step by a fourth-order Runga-Kutta time-marching scheme at each time step. Input wave characteristics are specified at the upstream boundary by an appropriate wave theory. At the downstream boundary, an artificial damping zone is used to prevent wave reflection back into the computational domain. Using the image Green function in the whole fluid domain, the integrations on the two lateral walls and bottom are excluded. The simulation results on extreme wave elevations in finite and infinite water-depths are compared with experimental results and second-order analytical solutions respectively. The wave kinematics is also discussed in the present study.展开更多
DNA tetrahedral nanostructures are considered to be uew nanocarriers because they can be precisely controlled and hold excellent penetration ability to the cellular membrane. Although the DNA tetrahedral nanostructure...DNA tetrahedral nanostructures are considered to be uew nanocarriers because they can be precisely controlled and hold excellent penetration ability to the cellular membrane. Although the DNA tetrahedral nanostructure is extensively studied in biology and medicine, its behavior in the cells with nanoscale resolution is not understood clearly. In this letter, we demonstrate superrcsolution fluorescence imaging of the distribution of DNA tetrahedral nanostructures in the cell with a simulated emission depletion （STED） microscope, which is built based on a conventional eonfocal microscope and can t）rovide a resolution of 70 nm.展开更多
Ocean boundaries present a significant effect on the vibroacoustic characteristics and sound propagation of an elastic structure in practice.In this study,an efficient finite element/wave superposition method(FE/WSM)f...Ocean boundaries present a significant effect on the vibroacoustic characteristics and sound propagation of an elastic structure in practice.In this study,an efficient finite element/wave superposition method(FE/WSM)for predicting the three-dimen-sional acoustic radiation from an arbitrary-shaped radiator in Pekeris waveguides with a lossy seabed is proposed.The method is based on the FE method(FEM),WSM,and sound propagation models.First,a near-field vibroacoustic model is established by the FEM to obtain vibration information on a radiator surface.Then,the WSM based on the Helmholtz boundary integral is used to pre-dict the far-field acoustic radiation and propagation.Furthermore,the rigorous image source method and complex normal mode are employed to obtain the near-and far-field Green’s function(GF),respectively.The former,which is based on the spherical wave decomposition,is adopted to accurately solve the near-field source strength,and the far-field acoustic radiation is calculated by the latter and perturbation theory.The simulations of both models are compared to theoretical wavenumber integration solutions.Finally,numerical experiments on elastic spherical and cylindrical shells in Pekeris waveguides are presented to validate the accuracy and efficiency of the proposed method.The results show that the FE/WSM is adaptable to complex radiators and ocean-acoustic envi-ronments,and are easy to implement and computationally efficient in calculating the structural vibration,acoustic radiation,and sound propagation of arbitrarily shaped radiators in practical ocean environments.展开更多
文摘As dense seismic arrays at different scales are deployed,the techniques to make full use of array data with low computing cost become increasingly needed.The wave gradiometry method(WGM)is a new branch in seismic tomography,which utilizes the spatial gradients of the wavefield to determine the phase velocity,wave propagation direction,geometrical spreading,and radiation pattern.Seismic wave propagation parameters obtained using the WGM can be further applied to invert 3D velocity models,Q values,and anisotropy at lithospheric(crust and/or mantle)and smaller scales(e.g.,industrial oilfield or fault zone).Herein,we review the theoretical foundation,technical development,and major applications of the WGM,and compared the WGM with other commonly used major array imaging methods.Future development of the WGM is also discussed.
文摘An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.
文摘Presents a new way of elastic wave imaging which features 1)high inversion accuracy; 2)stable and rapid convergence; 3) high resistance to random noise; 4) little dependence on initial values, and concludes with numerical results that this method has many advantages over all the other imaging methods because our inversion equation following the variation principle reflects the relation between the little variation of scattering field and that of perturbation function.
文摘A quasi-optical dielectric lens used for W-band focal plane array passive imaging has been developed. The imaging system requires the lens to form beam spot with 3 dB width less than 35 mm at distance of 3500 mm. The powerful optical design software ZEMAX was utilized to design the contours of the lens, and numerical method based on ray tracing and Huygens’ Principle was processed to verify the design result. Measurement result shows that the 3 dB width of the beam spot formed by the lens is 34 mm at distance of 3460 mm, and the beam pattern on imaging plane are equally arranged and the intensity decreases only 0.55 dB while the object lateral deviation increases to 300 mm.
基金the National Basic Research Program (973) of China(No.2011CB013505)
文摘It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the propagation characteristics of elastic wave in layered medium with different elastic parameters are discussed using dynamic analysis of finite element method. It is known that the S-wave velocity, density and thickness of layer are related to the properties of the elastic wave including waveform characteristics, spectral characteristics and time-frequency characteristics. We pay special attention to the structure with low velocity interlayer. The impact imaging method is applied to the grouting construction of the immersed tube tunnel. Data acquisition and analytical method are introduced in detail. The grouting effects can be qualitatively evaluated by comparing the characteristics of elastic wave before grouting with those after grouting. Finally, a quantitative evaluation is obtained according to the relationship between energy response of elastic wave and impedance ratio.
基金The National Natural Science Foundations of China under contract Nos 50709005 and 50639030the Program for Changjiang Scholars and Innovative Research Teams of Universities and Colleges of China under contract No. IRT0420the National High Tech Research and Development Program of China under contract No.2006AA09A109-3
文摘A fully nonlinear numerical model based on a time-domain higher-order boundary element method （HOBEM） is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.
基金supported by the National Natural Science Foundation of China (Grant Nos .50709005 ,50639030 and 10772040)the National High Technology Research and Development Program of China (Grant No.2006AA09A109-3) UK EPSRC(Grant Nos . GR/T07220/01 and GR/T07220/02)
文摘A numerical model is developed to simulate fully nonlinear extreme waves in finite and infinite water-depth wave tanks. A semi-mixed Enlerian-Lagrangian formulation is adopted and a higher-order boundary element method in conjunction with an image Green function is used for the fluid domain. The botmdary values on the free surface are updated at each time step by a fourth-order Runga-Kutta time-marching scheme at each time step. Input wave characteristics are specified at the upstream boundary by an appropriate wave theory. At the downstream boundary, an artificial damping zone is used to prevent wave reflection back into the computational domain. Using the image Green function in the whole fluid domain, the integrations on the two lateral walls and bottom are excluded. The simulation results on extreme wave elevations in finite and infinite water-depths are compared with experimental results and second-order analytical solutions respectively. The wave kinematics is also discussed in the present study.
基金supported by the National Natural Science Foundation of China under Grand Nos.61008056,21227804,61078016,and 61378062)
文摘DNA tetrahedral nanostructures are considered to be uew nanocarriers because they can be precisely controlled and hold excellent penetration ability to the cellular membrane. Although the DNA tetrahedral nanostructure is extensively studied in biology and medicine, its behavior in the cells with nanoscale resolution is not understood clearly. In this letter, we demonstrate superrcsolution fluorescence imaging of the distribution of DNA tetrahedral nanostructures in the cell with a simulated emission depletion （STED） microscope, which is built based on a conventional eonfocal microscope and can t）rovide a resolution of 70 nm.
基金financially supported by the National Key Research and Development Plan of China (No. 2016YFC1401203)the National Natural Science Foundation of China (Nos. 42006168 and 11404079)
文摘Ocean boundaries present a significant effect on the vibroacoustic characteristics and sound propagation of an elastic structure in practice.In this study,an efficient finite element/wave superposition method(FE/WSM)for predicting the three-dimen-sional acoustic radiation from an arbitrary-shaped radiator in Pekeris waveguides with a lossy seabed is proposed.The method is based on the FE method(FEM),WSM,and sound propagation models.First,a near-field vibroacoustic model is established by the FEM to obtain vibration information on a radiator surface.Then,the WSM based on the Helmholtz boundary integral is used to pre-dict the far-field acoustic radiation and propagation.Furthermore,the rigorous image source method and complex normal mode are employed to obtain the near-and far-field Green’s function(GF),respectively.The former,which is based on the spherical wave decomposition,is adopted to accurately solve the near-field source strength,and the far-field acoustic radiation is calculated by the latter and perturbation theory.The simulations of both models are compared to theoretical wavenumber integration solutions.Finally,numerical experiments on elastic spherical and cylindrical shells in Pekeris waveguides are presented to validate the accuracy and efficiency of the proposed method.The results show that the FE/WSM is adaptable to complex radiators and ocean-acoustic envi-ronments,and are easy to implement and computationally efficient in calculating the structural vibration,acoustic radiation,and sound propagation of arbitrarily shaped radiators in practical ocean environments.
