Glutinous rice(Oryza sativa var.glutinosa)stands out as one of the most popular rice varieties globally,amidst thousands of rice cultivars.Its increasing popularity is attributed to its rich nutritional compositions a...Glutinous rice(Oryza sativa var.glutinosa)stands out as one of the most popular rice varieties globally,amidst thousands of rice cultivars.Its increasing popularity is attributed to its rich nutritional compositions and health benefits.This review aims to summarize the nutritional compositions,volatile compounds,and health benefits of glutinous rice.Further,in-depth studies are necessary to explore the utilization of glutinous rice in enhancing processing technologies and developing new food products.Glutinous rice has been shown to possess numerous health benefits,including antioxidant activity,bioactive compounds,anti-cancer properties,anti-inflammatory effects,anti-diabetic potential,and cholesterol-lowering effects.Besides its nutritional compositions,the major volatile compounds identified in glutinous rice could serve as a functional food for human consumption.Emerging processing technologies related to glutinous rice are elaborated to improve the latest developments for incorporating them into various food products.展开更多
Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using n...Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.展开更多
Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient ...Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient equipment and thus have low oil extraction rates. Small-scale processing by smallholders dates back to the early 1980s and has witnessed a lot of changes as a result of new actors in the sector, changing technologies and to an extent, government policies. This paper attempts a review of the origins and evolution of small-scale palm oil processing using intermediate technology, highlighting its importance to both the farmer and the national economy. An attempt is made to look into the future of this activity, with proposals for its consolidation.展开更多
This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics i...This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.展开更多
Process analytical technology(PAT) is gaining more interest in the biomanufacturing industry because of its potential to improve operational control and compliance through real-time quality assurance.Currently, biopha...Process analytical technology(PAT) is gaining more interest in the biomanufacturing industry because of its potential to improve operational control and compliance through real-time quality assurance.Currently, biopharmaceutical producers mainly monitor chromatographic processes with ultraviolet/visible(UV/Vis) absorbance. However, this measurement has a very limited correlation with purity and quantity. The current study aims to determine the concentration of monoclonal antibody(mAb) and host cell proteins(HCPs) using a build-in UV/Vis monitoring during Protein A affinity chromatography and to optimize the separation conditions for high purity of mAb and minimizing the HCPs content. The eluate was analyzed through in-line UV/Vis at 280 and 410 nm, representing mAb and HCPs concentration,respectively. Each 0.1 column volume(CV) fraction of UV/Vis chromatogram peak area were calculated,and different separation conditions were then compared. The optimum conditions of mAb separation were found as 12 CV loading, elution at pH 3.5, and starting the collection at 0.5 CV point, resulting in high m Ab recovery of 95.92% and additional removal of 49.98% of HCP comparing with whole elution pool. This study concluded that UV/Vis-based in-line monitoring at 280 and 410 nm showed a high potential to optimize and real-time control Protein A affinity chromatography for mAb purification from HCPs.展开更多
Water is an important material resource for human survival,and with the increasing development of society,the amount of urban industrial wastewater and domestic sewage is gradually increasing.However,wastewater collec...Water is an important material resource for human survival,and with the increasing development of society,the amount of urban industrial wastewater and domestic sewage is gradually increasing.However,wastewater collection and treatment facilities lag behind,so that a large number of wastewater enters urban water,making urban water become gradually black and smelly.In order to provide a good living environment for human beings,a large number of scholars actively explore the treatment technology of black and smelly water.In this paper,the evolution process of black and smelly water was introduced firstly,and then the treatment technology of black and smelly water was summarized.Finally,the prospects for the development of the treatment technology were put forward.展开更多
The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bul...The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.展开更多
This paper selected the corn processing industry technology innovation alliance in Heilongjiang Province as the research object, evaluated the operational performance of the alliance by using analytic hierarchy proces...This paper selected the corn processing industry technology innovation alliance in Heilongjiang Province as the research object, evaluated the operational performance of the alliance by using analytic hierarchy process(AHP) and fuzzy comprehensive evaluation methods. AHP empirical results showed that the satisfaction of information communication and the satisfaction of the management process were the weakest. And the order from high to low on the level of indicators of the impact for the alliance was the result of alliance operations and the process of alliance operations, the behavioral attitude of alliance members. Besides, the results of fuzzy comprehensive evaluation showed that the operational performance of the corn processing industry technology innovation alliance in Heilongjiang Province was in the general level.展开更多
This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their f...This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their fibers. However the material used in the study comprised the 6 Egyptian cotton varieties Giza70, Giza80, Giza86, Giza88, Giza90 and Giza92. According to the local practice in Egypt, Giza70, Giza88 and Giza92 belong to the Extra-Long Staple (ELS) category, while Giza80, Giza86 and Giza90 are included under the Long Staple (LS) category. The regression analysis of the relationships between fiber properties and yarn skein strength (lea product) of the 2 carded ring counts 40 and 50 Ne, was employed to drive an equation for calculating the Multiplicative Analytic Hierarchy Process (MIAHP) values. The values of the MIAHP have been used as numerical determinations of the technological values of the Egyptian cotton varieties. Nevertheless, the findings of this study clarified that with respect to the criteria weights, the pair-wise comparisons denoted that fiber length properties of Egyptian cotton ranked first where they revealed the most dominant effect on yarn strength, while tensile properties ranked second with a relative weight close to that of fiber length. On the contrary, the relative weight of fiber fineness (micronaire reading) was found to be marginal. With regard to the relative weight of sub-criterion, the pair-wise comparisons indicated that the role of fiber tenacity as a determinant of yarn strength is much superior to that of fiber elongation. Further the global weights of the sub-criterion of fiber length pointed out that the UHML (upper half mean length) plays an important role in determining yarn strength of the Egyptian cotton comparing with either the UI (uniformity index) or the SFC (short fiber content). In conformity with the values of the MIAHP, it was found that in the order of descending rank, Giza88 ranked first, followed by Giza92, Giza70, Giza86, Giza80 and finally Giza90.展开更多
The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical s...The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical structure will not ensure the integration of processes across organisational un its and guarantee desirable performance. Therefore, management and management li terature wonders: · How should we connect processes to the external environment within a strategi c framework · Which organisational structures do meet performance requirements · Which choices and freedom do we have within organisational structures · How and when do we implement organisational structures That the hierarchical structure does not meet as such the performance requiremen ts nor did it relate to these became already clear during case studies performed in the ’70s. The conclusion was drawn that organisational changes should affect working processes before they proof to be viable. This required the development of new approach through empirical studies and base d on literature. This led to the development of the organelle structure. The org anelle structure should connect to the strategy and the product flow. Thereto, a decision model has been developed for revealing these relations and the practic al implication. During a number of case studies this methodology has been refined and includes t he strategic choice between variants for the organelle structure with their own performance capabilities; we distinguish about 20 variants ranging between the f unctional organisation and the product flow organisation. These ranges of choice s however can be connected to different order entry points, stemming from logist ic concepts. This extends the performance to improved lead-times and improved c ontrol. Strategic choices relate the organelle structure to external performance criteria dictated by product/market-combinations: · lead-time · quality · costs and internal choices for performance criteria: · flexibility · productivity · resource utilisation · innovative performance. Case studies reveal the drastic improvements of the performance of operations an d manufacturing. The paper will discuss a few of these implementations to demons trate the impact. They also show how one derives the hierarchical structure from the choice for the organelle structure. Organelle structures do bridge the link of an industrial company to its environm ent and the internal possibilities, dictated by characteristics of product flow and process execution. The link to the environment results in a strategic framew ork for assessment of alternatives and possibilities. Choices for organelle stru ctures depend strongly on choices on the order entry points of the hardware flow and the specification flow. The evaluation of the characteristics takes place a gainst the strategic framework ensuring competitive advantage as well as a high probability of factual implementation and performance improvement.展开更多
Successful innovation is so important that enterprise scientifically manages the process and risk of technological innovation. Firstly, the process of innovation is generalized to seven stages including formation of i...Successful innovation is so important that enterprise scientifically manages the process and risk of technological innovation. Firstly, the process of innovation is generalized to seven stages including formation of innovation idea, investigation and evaluation, research and development, middle test, mass production, marketing and selling, after service and feedback. Secondly, the origin of risk in the process of innovation is analyzed. The purpose is to help enterprise identify risk and take countermeasure to minimize the potential loss and maximize the potential income.展开更多
Organizations may increase data security and operational efficiency by connecting Salesforce with Identity and Access Management (IAM) systems like Saviynt. This study delves deeply into the details of this revolution...Organizations may increase data security and operational efficiency by connecting Salesforce with Identity and Access Management (IAM) systems like Saviynt. This study delves deeply into the details of this revolution that is being encouraged to shift towards IAM software and potential drawbacks such as excessive provisioning and implementation issues. The study illuminated excellent practices and emphasized the importance of constant monitoring by using secondary theme analysis and qualitative research as proof. The findings indicate Saviynt as a viable solution and provide detailed information for firms seeking a smooth and secure integration path.展开更多
This article discusses the current status and development strategies of computer science and technology in the context of big data.Firstly,it explains the relationship between big data and computer science and technol...This article discusses the current status and development strategies of computer science and technology in the context of big data.Firstly,it explains the relationship between big data and computer science and technology,focusing on analyzing the current application status of computer science and technology in big data,including data storage,data processing,and data analysis.Then,it proposes development strategies for big data processing.Computer science and technology play a vital role in big data processing by providing strong technical support.展开更多
In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expan...In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expansion of highway construction,power supply,and distribution has led to several challenges in mechanical and electrical engineering technology.Ensuring the safe,stable,and cost-effective operation of the power supply and distribution system to meet the diverse requirements of highway operations has become a pressing issue.This article takes an example of a highway electromechanical engineering power supply and distribution construction project to provide insight into the construction process of highway electromechanical engineering power supply and distribution technology.展开更多
This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and worki...This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.展开更多
The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultur...The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultural products processing enterprises are analyzed from the aspects of market,personal training and technology radiation,which are mainly the lack of close connection with market.Countermeasures for the technological innovation of agricultural products processing enterprises are put forward,such as establishing modern enterprise culture with innovative features,strengthening the market benefits of brand,constructing a comprehensive customer orientation information platform,scientifically predicting and developing the market,doing well in market positioning of enterprise,selecting corresponding technology innovation strategy,taking technological innovation strategy as the basis,realizing the transformation from "4P" marketing combination to "4C",cultivating technical personnel,and realizing the integration of professional skill and marketing ability.展开更多
A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9...A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9μm,and the diffusion processing time needed for forming junction isolation diffusions is substantially reduced. The isolation diffusions have a smaller lateral extent and occupy less chip area. High voltage double RESURF LD- MOS with a breakdown voltage of up to 900V,as well as low voltage CMOS and BJT,are achieved using this high voltage BCD compatible process. An experimental high voltage half bridge gate drive IC using a coupled level shift structure is also successfully implemented, and the high side floating offset voltage in the half bridge drive IC is 880V. The major features of this process for high voltage applications are also clearly demonstrated.展开更多
In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion s...In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in 'Zhongcha 302' was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with 'Zhongcha 302' as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.展开更多
An effect of unequal deformation in development of advanced plasticprocessing technologies is researched by studying an in-plane bending process of strip metal underunequal compressing. The research results show the f...An effect of unequal deformation in development of advanced plasticprocessing technologies is researched by studying an in-plane bending process of strip metal underunequal compressing. The research results show the following: If appropriately controlled, unequalplastic deformation can play an important role not only in the improvement of quality of partsobtained by plastic processing technologies, but also in the development of new processes foradvanced plastic working technologies. A coordinated growth of unequal plastic deformation candevelop the deformation potentiality of material to the fall. The degree of unequal plasticdeformation can be used as bases for optimization design of processes and dies of plastic forming.展开更多
The degradation and mineralization of aniline (AN) using ozone combined with Fenton reagent (O3/Fenton) in a rotating packed bed (RPB) was proposed in this study, and the process (RPB-O3/Fenton) was compared w...The degradation and mineralization of aniline (AN) using ozone combined with Fenton reagent (O3/Fenton) in a rotating packed bed (RPB) was proposed in this study, and the process (RPB-O3/Fenton) was compared with conventional O3/Fenton in a stirred tank reactor (STR-O3/Fenton) or single ozonation in an RPB (RPB-O3), Effects of high gravity factor, H2O2 dosage, H2O2 dosing method and initial pH on the AN mineralization efficiency were investigated in the RPB-O3/Fenton process, In addition, the behavior of Fe(Ⅱ) was monitored at different H2O2 dosing methods and pH values. Finally, the optimal operation conditions were determined with high gravity factor of 100, initial pH of 5, Fe(Ⅱ) concentration of 0.8 mmol·L-1 and H2O2 dosage of 2.5 ml. Under these conditions, for aniline wastewater at the volume of I L and concentration of 200 mg· L- 1 ,a fast and thorough decay of AN was conducted in 10 min, and the TOC removal efficiency reached 89% in 60 min. The main intermediates of p-benzoquinone, nitrobenzene, maleic acid and oxalic acid were identified by liquid chromatography/mass spectroscopy (LC/MS), and the degradation pathways of AN in RPB-O3/Fenton system were proposed based on experimental evidence. It could be envisioned that high-gravity technology combined with O3/Fenton processes would be promising in the rapid and efficient mineralization ofwastewater.展开更多
基金the Ministry of Higher Education,Malaysia for financial support via the Transdisciplinary Research Grant Scheme Project(Grant No.TRGS/1/2020/UPM/02/7)。
文摘Glutinous rice(Oryza sativa var.glutinosa)stands out as one of the most popular rice varieties globally,amidst thousands of rice cultivars.Its increasing popularity is attributed to its rich nutritional compositions and health benefits.This review aims to summarize the nutritional compositions,volatile compounds,and health benefits of glutinous rice.Further,in-depth studies are necessary to explore the utilization of glutinous rice in enhancing processing technologies and developing new food products.Glutinous rice has been shown to possess numerous health benefits,including antioxidant activity,bioactive compounds,anti-cancer properties,anti-inflammatory effects,anti-diabetic potential,and cholesterol-lowering effects.Besides its nutritional compositions,the major volatile compounds identified in glutinous rice could serve as a functional food for human consumption.Emerging processing technologies related to glutinous rice are elaborated to improve the latest developments for incorporating them into various food products.
基金supported by the High Value-added Food Technology Development Program in Korea (Grant No. 323002-4)the Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry, Republic of Korea。
文摘Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.
文摘Crude palm Oil (CPO) processing is very popular in African Countries. In Cameroon, various actors are involved ranging from agro-industrial complexes to traditional processing by smallholders who use very inefficient equipment and thus have low oil extraction rates. Small-scale processing by smallholders dates back to the early 1980s and has witnessed a lot of changes as a result of new actors in the sector, changing technologies and to an extent, government policies. This paper attempts a review of the origins and evolution of small-scale palm oil processing using intermediate technology, highlighting its importance to both the farmer and the national economy. An attempt is made to look into the future of this activity, with proposals for its consolidation.
文摘This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary,and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.
基金supported by the National Key Research & Development Program of China (2021YFE0113300)the National Natural Science Foundation of China (22078286 and 21878263)+1 种基金Zhejiang Universitythe Talent-Introduction Program of China for the Postdoctoral Researcher for the financial support。
文摘Process analytical technology(PAT) is gaining more interest in the biomanufacturing industry because of its potential to improve operational control and compliance through real-time quality assurance.Currently, biopharmaceutical producers mainly monitor chromatographic processes with ultraviolet/visible(UV/Vis) absorbance. However, this measurement has a very limited correlation with purity and quantity. The current study aims to determine the concentration of monoclonal antibody(mAb) and host cell proteins(HCPs) using a build-in UV/Vis monitoring during Protein A affinity chromatography and to optimize the separation conditions for high purity of mAb and minimizing the HCPs content. The eluate was analyzed through in-line UV/Vis at 280 and 410 nm, representing mAb and HCPs concentration,respectively. Each 0.1 column volume(CV) fraction of UV/Vis chromatogram peak area were calculated,and different separation conditions were then compared. The optimum conditions of mAb separation were found as 12 CV loading, elution at pH 3.5, and starting the collection at 0.5 CV point, resulting in high m Ab recovery of 95.92% and additional removal of 49.98% of HCP comparing with whole elution pool. This study concluded that UV/Vis-based in-line monitoring at 280 and 410 nm showed a high potential to optimize and real-time control Protein A affinity chromatography for mAb purification from HCPs.
文摘Water is an important material resource for human survival,and with the increasing development of society,the amount of urban industrial wastewater and domestic sewage is gradually increasing.However,wastewater collection and treatment facilities lag behind,so that a large number of wastewater enters urban water,making urban water become gradually black and smelly.In order to provide a good living environment for human beings,a large number of scholars actively explore the treatment technology of black and smelly water.In this paper,the evolution process of black and smelly water was introduced firstly,and then the treatment technology of black and smelly water was summarized.Finally,the prospects for the development of the treatment technology were put forward.
文摘The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.
基金Supported by Technology Research and Development Project of Heilongjiang Province(GB14D202)
文摘This paper selected the corn processing industry technology innovation alliance in Heilongjiang Province as the research object, evaluated the operational performance of the alliance by using analytic hierarchy process(AHP) and fuzzy comprehensive evaluation methods. AHP empirical results showed that the satisfaction of information communication and the satisfaction of the management process were the weakest. And the order from high to low on the level of indicators of the impact for the alliance was the result of alliance operations and the process of alliance operations, the behavioral attitude of alliance members. Besides, the results of fuzzy comprehensive evaluation showed that the operational performance of the corn processing industry technology innovation alliance in Heilongjiang Province was in the general level.
文摘This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their fibers. However the material used in the study comprised the 6 Egyptian cotton varieties Giza70, Giza80, Giza86, Giza88, Giza90 and Giza92. According to the local practice in Egypt, Giza70, Giza88 and Giza92 belong to the Extra-Long Staple (ELS) category, while Giza80, Giza86 and Giza90 are included under the Long Staple (LS) category. The regression analysis of the relationships between fiber properties and yarn skein strength (lea product) of the 2 carded ring counts 40 and 50 Ne, was employed to drive an equation for calculating the Multiplicative Analytic Hierarchy Process (MIAHP) values. The values of the MIAHP have been used as numerical determinations of the technological values of the Egyptian cotton varieties. Nevertheless, the findings of this study clarified that with respect to the criteria weights, the pair-wise comparisons denoted that fiber length properties of Egyptian cotton ranked first where they revealed the most dominant effect on yarn strength, while tensile properties ranked second with a relative weight close to that of fiber length. On the contrary, the relative weight of fiber fineness (micronaire reading) was found to be marginal. With regard to the relative weight of sub-criterion, the pair-wise comparisons indicated that the role of fiber tenacity as a determinant of yarn strength is much superior to that of fiber elongation. Further the global weights of the sub-criterion of fiber length pointed out that the UHML (upper half mean length) plays an important role in determining yarn strength of the Egyptian cotton comparing with either the UI (uniformity index) or the SFC (short fiber content). In conformity with the values of the MIAHP, it was found that in the order of descending rank, Giza88 ranked first, followed by Giza92, Giza70, Giza86, Giza80 and finally Giza90.
文摘The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical structure will not ensure the integration of processes across organisational un its and guarantee desirable performance. Therefore, management and management li terature wonders: · How should we connect processes to the external environment within a strategi c framework · Which organisational structures do meet performance requirements · Which choices and freedom do we have within organisational structures · How and when do we implement organisational structures That the hierarchical structure does not meet as such the performance requiremen ts nor did it relate to these became already clear during case studies performed in the ’70s. The conclusion was drawn that organisational changes should affect working processes before they proof to be viable. This required the development of new approach through empirical studies and base d on literature. This led to the development of the organelle structure. The org anelle structure should connect to the strategy and the product flow. Thereto, a decision model has been developed for revealing these relations and the practic al implication. During a number of case studies this methodology has been refined and includes t he strategic choice between variants for the organelle structure with their own performance capabilities; we distinguish about 20 variants ranging between the f unctional organisation and the product flow organisation. These ranges of choice s however can be connected to different order entry points, stemming from logist ic concepts. This extends the performance to improved lead-times and improved c ontrol. Strategic choices relate the organelle structure to external performance criteria dictated by product/market-combinations: · lead-time · quality · costs and internal choices for performance criteria: · flexibility · productivity · resource utilisation · innovative performance. Case studies reveal the drastic improvements of the performance of operations an d manufacturing. The paper will discuss a few of these implementations to demons trate the impact. They also show how one derives the hierarchical structure from the choice for the organelle structure. Organelle structures do bridge the link of an industrial company to its environm ent and the internal possibilities, dictated by characteristics of product flow and process execution. The link to the environment results in a strategic framew ork for assessment of alternatives and possibilities. Choices for organelle stru ctures depend strongly on choices on the order entry points of the hardware flow and the specification flow. The evaluation of the characteristics takes place a gainst the strategic framework ensuring competitive advantage as well as a high probability of factual implementation and performance improvement.
文摘Successful innovation is so important that enterprise scientifically manages the process and risk of technological innovation. Firstly, the process of innovation is generalized to seven stages including formation of innovation idea, investigation and evaluation, research and development, middle test, mass production, marketing and selling, after service and feedback. Secondly, the origin of risk in the process of innovation is analyzed. The purpose is to help enterprise identify risk and take countermeasure to minimize the potential loss and maximize the potential income.
文摘Organizations may increase data security and operational efficiency by connecting Salesforce with Identity and Access Management (IAM) systems like Saviynt. This study delves deeply into the details of this revolution that is being encouraged to shift towards IAM software and potential drawbacks such as excessive provisioning and implementation issues. The study illuminated excellent practices and emphasized the importance of constant monitoring by using secondary theme analysis and qualitative research as proof. The findings indicate Saviynt as a viable solution and provide detailed information for firms seeking a smooth and secure integration path.
文摘This article discusses the current status and development strategies of computer science and technology in the context of big data.Firstly,it explains the relationship between big data and computer science and technology,focusing on analyzing the current application status of computer science and technology in big data,including data storage,data processing,and data analysis.Then,it proposes development strategies for big data processing.Computer science and technology play a vital role in big data processing by providing strong technical support.
文摘In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expansion of highway construction,power supply,and distribution has led to several challenges in mechanical and electrical engineering technology.Ensuring the safe,stable,and cost-effective operation of the power supply and distribution system to meet the diverse requirements of highway operations has become a pressing issue.This article takes an example of a highway electromechanical engineering power supply and distribution construction project to provide insight into the construction process of highway electromechanical engineering power supply and distribution technology.
文摘This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.
基金Supported by the Innovation Fund Project for Graduate Students of Wuhan Polytechnic University(09cx028)
文摘The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultural products processing enterprises are analyzed from the aspects of market,personal training and technology radiation,which are mainly the lack of close connection with market.Countermeasures for the technological innovation of agricultural products processing enterprises are put forward,such as establishing modern enterprise culture with innovative features,strengthening the market benefits of brand,constructing a comprehensive customer orientation information platform,scientifically predicting and developing the market,doing well in market positioning of enterprise,selecting corresponding technology innovation strategy,taking technological innovation strategy as the basis,realizing the transformation from "4P" marketing combination to "4C",cultivating technical personnel,and realizing the integration of professional skill and marketing ability.
文摘A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9μm,and the diffusion processing time needed for forming junction isolation diffusions is substantially reduced. The isolation diffusions have a smaller lateral extent and occupy less chip area. High voltage double RESURF LD- MOS with a breakdown voltage of up to 900V,as well as low voltage CMOS and BJT,are achieved using this high voltage BCD compatible process. An experimental high voltage half bridge gate drive IC using a coupled level shift structure is also successfully implemented, and the high side floating offset voltage in the half bridge drive IC is 880V. The major features of this process for high voltage applications are also clearly demonstrated.
文摘In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in 'Zhongcha 302' was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with 'Zhongcha 302' as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.
基金National Natural Science Foundation of China (No.59475059) and the Aeronautical Science Foundation of China (No.94G53111).
文摘An effect of unequal deformation in development of advanced plasticprocessing technologies is researched by studying an in-plane bending process of strip metal underunequal compressing. The research results show the following: If appropriately controlled, unequalplastic deformation can play an important role not only in the improvement of quality of partsobtained by plastic processing technologies, but also in the development of new processes foradvanced plastic working technologies. A coordinated growth of unequal plastic deformation candevelop the deformation potentiality of material to the fall. The degree of unequal plasticdeformation can be used as bases for optimization design of processes and dies of plastic forming.
基金Supported by the National Natural Science Foundations of China(U1610106)Shanxi Excellent Talent Science and Technology Innovation Project(201705D211011)+1 种基金Specialized Research Fund for Sanjin Scholars Program of Shanxi ProvinceNorth University of China Fund for Distinguished Young Scholars
文摘The degradation and mineralization of aniline (AN) using ozone combined with Fenton reagent (O3/Fenton) in a rotating packed bed (RPB) was proposed in this study, and the process (RPB-O3/Fenton) was compared with conventional O3/Fenton in a stirred tank reactor (STR-O3/Fenton) or single ozonation in an RPB (RPB-O3), Effects of high gravity factor, H2O2 dosage, H2O2 dosing method and initial pH on the AN mineralization efficiency were investigated in the RPB-O3/Fenton process, In addition, the behavior of Fe(Ⅱ) was monitored at different H2O2 dosing methods and pH values. Finally, the optimal operation conditions were determined with high gravity factor of 100, initial pH of 5, Fe(Ⅱ) concentration of 0.8 mmol·L-1 and H2O2 dosage of 2.5 ml. Under these conditions, for aniline wastewater at the volume of I L and concentration of 200 mg· L- 1 ,a fast and thorough decay of AN was conducted in 10 min, and the TOC removal efficiency reached 89% in 60 min. The main intermediates of p-benzoquinone, nitrobenzene, maleic acid and oxalic acid were identified by liquid chromatography/mass spectroscopy (LC/MS), and the degradation pathways of AN in RPB-O3/Fenton system were proposed based on experimental evidence. It could be envisioned that high-gravity technology combined with O3/Fenton processes would be promising in the rapid and efficient mineralization ofwastewater.