Ground roll wave suppression based on wavelet frequency division and radial trace transform

Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform （RTT） considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude.

Time-sequential color code division multiplexing holographic display with metasurface

Color metasurface holograms are powerful and versatile platforms for modulating the amplitude,phase,polarization,and other properties of light at multiple operating wavelengths.However,the current color metasurface holography can only realize static manipulation.In this study,we propose and demonstrate a multiplexing metasurface technique combined with multiwavelength code-division multiplexing(CDM)to realize dynamic manipulation.Multicolor code references are utilized to record information within a single metasurface and increase the information capacity and security for anticracks.A total of 48 monochrome images consisting of pure color characters and multilevel color video frames were reconstructed in dual polarization channels of the birefringent metasurface to exhibit high information density,and a video was displayed via sequential illumination of the corresponding code patterns to verify the ability of dynamic manipulation.Our approach demonstrates significant application potential in optical data storage,optical encryption,multiwavelengthversatile diffractive optical elements,and stimulated emission depletion microscopy.

The Cumulative Method for Multiplication and Division

This paper provides a method of the process of computation called the cumulative method, it is based upon repeated cumulative process. The cumulative method is being adapted to the purposes of computation, particularly multiplication and division. The operations of multiplication and division are represented by algebraic formulas. An advantage of the method is that the cumulative process can be performed on decimal numbers. The present paper aims to establish a basic and useful formula valid for the two fundamental arithmetic operations of multiplication and division. The new cumulative method proved to be more flexible and made it possible to extend the multiplication and division based on repeated addition/subtraction to decimal numbers.

Machine learning solution for regional landslide susceptibility based on fault zone division strategy

Landslide susceptibility assessment is an essential tool for disaster prevention and management. In areas with multiple fault zones, the impact of fault zone on slope stability cannot be disregarded. This study performed qualitative analysis of fault zones and proposed a zoning method to assess the landslide susceptibility in Chengkou County, Chongqing Municipality, China. The region within a distance of 1 km from the faults was designated as sub-zone A, while the remaining area was labeled as sub-zone B. To accomplish the assessment, a dataset comprising 388 historical landslides and 388 non-landslide points was used to train the random forest model. 10-fold cross-validation was utilized to select the training and testing datasets for the model. The results of the models were analyzed and discussed, with a focus on model performance and prediction uncertainty. By implementing the proposed division strategy based on fault zone, the accuracy, precision, recall, F-score, and AUC of both two sub-zones surpassed those of the whole region. In comparison to the results obtained for the whole region, sub-zone B exhibited an increase in AUC by 6.15%, while sub-zone A demonstrated a corresponding increase of 1.66%. Moreover, the results of 100 random realizations indicated that the division strategy has little effect on the prediction uncertainty. This study introduces a novel approach to enhance the prediction accuracy of the landslide susceptibility mapping model in areas with multiple fault zones.

Cell division cyclin 25C knockdown inhibits hepatocellular carcinoma development by inducing endoplasmic reticulum stress

BACKGROUND Cell division cyclin 25C(CDC25C)is a protein that plays a critical role in the cell cycle,specifically in the transition from the G2 phase to the M phase.Recent research has shown that CDC25C could be a potential therapeutic target for cancers,particularly for hepatocellular carcinoma(HCC).However,the specific regulatory mechanisms underlying the role of CDC25C in HCC tumorigenesis and development remain incompletely understood.AIM To explore the impact of CDC25C on cell proliferation and apoptosis,as well as its regulatory mechanisms in HCC development.METHODS Hepa1-6 and B16 cells were transduced with a lentiviral vector containing shRNA interference sequences(LV-CDC25C shRNA)to knock down CDC25C.Subsequently,a xenograft mouse model was established by subcutaneously injecting transduced Hepa1-6 cells into C57BL/6 mice to assess the effects of CDC25C knockdown on HCC development in vivo.Cell proliferation and migration were evaluated using a Cell Counting Kit-8 cell proliferation assays and wound healing assays,respectively.The expression of endoplasmic reticulum(ER)stress-related molecules(glucose-regulated protein 78,X-box binding protein-1,and C/EBP homologous protein)was measured in both cells and subcutaneous xenografts using quantitative real-time PCR(qRT-PCR)and western blotting.Additionally,apoptosis was investigated using flow cytometry,qRT-PCR,and western blotting.RESULTS CDC25C was stably suppressed in Hepa1-6 and B16 cells through LV-CDC25C shRNA transduction.A xenograft model with CDC25C knockdown was successfully established and that downregulation of CDC25C expression significantly inhibited HCC growth in mice.CDC25C knockdown not only inhibited cell proliferation and migration but also significantly increased the ER stress response,ultimately promoting ER stress-induced apoptosis in HCC cells.CONCLUSION The regulatory mechanism of CDC25C in HCC development may involve the activation of ER stress and the ER stress-induced apoptosis signaling pathway.

Numerical Simulation of Flow Field and Flow State Division in Thin-Film Evaporators

The flow field and flow state of thin-film evaporators are complex,and it is significant to effectively divide and quantify the flow field and flow state,as well as to study the internal flow field distribution and material mixing characteristics to improve the efficiency of thin-film evaporators.By using computational fluid dynamics(CFD)numerical simulation,the distribution pattern of the high-viscosity fluid flow field in the thin-film evaporators was obtained.It was found that the staggered interrupted blades could greatly promote material mixing and transportation,and impact the film formation of high-viscosity materials on the evaporator wall.Furthermore,a flow field state recognition method based on radial volume fraction statistics was proposed,and could quantitatively describe the internal flow field of thin-film evaporators.The method divides the high-viscosity materials in the thin-film evaporators into three flow states,the liquid film state,the exchange state and the liquid mass state.The three states of materials could be quantitatively described.The results show that the materials in the exchange state can connect the liquid film and the liquid mass,complete the material mixing and exchange,renew the liquid film,and maintain continuous and efficient liquid film evaporation.

Rural labor migration and farmers’arrangements of rice production systems in Central China:Insight from the intergenerational division of labor

Rice production is crucial for food security in China,and its relationship with rural labor migration has been studied extensively.Labor migration in rural China has taken new forms in recent years.There has been a discernible trend wherein adult children have started migrating to cities while their elderly parents return to villages to re-engage in on-farm work.The phenomenon has notably shaped the intergenerational division of labor(IDL)within households.However,it remains to be seen how farmers adjust their rice production systems in response to the IDL.The age of 60 years for employment injury insurance is the eligibility threshold for off-farm employment and is used to obtain a source of exogenous variation in the IDL.Based on a representative household survey of 1,752 rice farmers in the Hubei Province of Central China,our fuzzy regression discontinuity analysis reveals that farmers in IDL households are more likely to adopt ratoon rice(RR)than single cropping rice(SR)or double cropping rice(DR).The effect of the IDL varies under different levels of operational scales and specialized agricultural service availability.Further analysis suggests that farmers’arrangements are associated with two potential mechanisms of downward intergenerational transfer.Monetary transfer for urban housing purchases increases RR in IDL households,and time transfer for intergenerational childcare significantly promotes SR in IDL households.This study enhances the understanding of the relationship between rural labor migration and rice production in China,providing a reference for adjusting rice production systems to ensure food security.

Structural characteristics and tectonic division of the Zambezi Delta basin in the offshore East Africa:evidences from gravity and seismic data

The Zambezi Delta basin is a passive marginal basin located on the East African coast that has good oil and gas exploration potential.Due to the special geological evolutionary background of the Beira High in the Zambezi Delta basin,it has a low gravity anomaly,and the existing seismic survey lines do not cover the whole basin;therefore,it is difficult to interpret the structural characteristics of the whole basin based solely on gravity or seismic data.Based on satellite altimetry gravity anomaly data,this study infers the distribution characteristics of faults in the Zambezi Delta basin by using the normalized vertical derivative of the total horizontal derivative(NVDR-THDR)technique.Then,constrained by seismic data,the gravity anomaly at the Moho interface is extracted by using the fast forward method of the double-interface model of the gravity anomaly,and this anomaly is then removed from the Bouguer gravity anomaly to obtain the sedimentary layer gravity anomaly.The thickness of the sedimentary strata is obtained by inversing the sedimentary basement depth of the whole basin.Then,uplifts and depressions are divided based on a sedimentary layer thickness of 3 km.This research demonstrates that the Zambezi Delta basin mainly features nearly SN-trending and NE-trending faults and that these faults exhibit east-west partitioning.The nearly SN-trending strike-slip faults controlled the sedimentary development of the basin,and the NE-trending tensile faults may have acted as migration channels for oil,gas and magma.The“overcompensation”effect of the Moho interface gravity anomaly on the gravity anomaly of the sedimentary layer is caused by the depression of the Moho interface beneath the Beira High,which results in a low gravity anomaly value for the Beira High.The pattern of uplifts and depressions trends NE and has the structural characteristics of east-west blocks.

Spheres of Urban Influence and Factors in Beijing-Tianjin-Hebei Metropolitan Region Based on Viewpoint of Administrative Division Adjustment

The coordinated development of Beijing, Tianjin and Hebei has been elevated as China's important strategy. And, the priority in considering how to bring the maximum effect of their coordinated development into play is to delineate the spheres of urban influence with regard to the cities in the Beijing-Tianjin-Hebei Metropolitan Region. By building an evaluation index system of urban comprehensive strength, this paper applies the principal component analysis method to determine centrality strength of the cities, and the breakpoint theory and weighted Voronoi diagram to identify the spheres of urban influence in all central cities of the region. Results show that 13 central cities within the region greatly differ in strength, which can be classified into four tiers and that the spheres of urban influence do not have a high goodness of fit with administrative jurisdiction scope. Cities like Beijing, Tianjin, Shijiazhuang and Handan have larger spheres of urban, spheres of urban influence in Tangshan and Qinhuangdao are basically consistent with their administrative jurisdiction scopes, and seven cities including Langfang and Baoding have smaller spheres of urban influence. So according to these cities' comprehensive strength and spheres of influence, the region can be divided into five plates: Beijing, Tianjin, Shijiazhuang, Tangshan and Handan. The major influence factors for inconsistency between spheres of urban influence and spheres of jurisdiction include difference in urban administrative ranking, small number of central cities with weak strength, discrepancy in the number of counties under jurisdiction, unreasonable spheres of jurisdiction and diversity in topographical conditions. In order to solve the imbalance in the spheres of urban influence and those of jurisdiction and better facilitate the coordinated development of the region, it is advised to adjust administrative areas so as to obtain more optimized urban spatial layout and more reasonable urban scale hierarchy system.

Two Different Role Division Control Strategies for Torque and Axial Force of Conical Bearingless Switched Reluctance Motor

Although the five-degree-of-freedom magnetic levitation system composed of two conical bearingless switched reluctance motors(CBSRMs)owns the simplest structure,the torque and levitation forces are coupled greatly.Therefore,it is difficult to make the rotor rotate and be fully levitated simultaneously.To solve this problem,two different role division control strategies are proposed in this paper,i.e.individual role division and mutual role division control strategies.The difference between them is the selection of motor which controls the torque or the axial force.In order to understand the characteristics of control variables,the principle and mathematical model of CBSRM are introduced.After that,two control strategies are explained in detail.To verify the demonstrated performance,the simulations are completed with MATLAB/Simulink.

MOTION COMPENSATION FOR WIDE BEAM SAR BASED ON FREQUENCY DIVISION

Aperture-dependent motion compensation is important for wide beam Synthetic Aperture Radar(SAR) data processing.This paper studies a wide beam motion compensation algorithm based on frequency division.It takes blocks along azimuth dimension in frequency domain and applies an-gle-variant motion compensation in time domain.With this frequency division based motion com-pensation approach,the effects of aperture-dependent residual phase errors are corrected precisely.The rationale and procedure of this algorithm are introduced in detail.Point targets and images of a P-band airborne SAR with motion errors are simulated to validate this algorithm.Compared with the wide beam motion compensation algorithms based on time division,the proposed algorithm has better performance,especially in terms of high-frequency motion errors.

Adjustment of Administrative Divisions and Upgrading of Industrial Structure in Hefei Metropolitan Area:Taking"Partitions of Chaohu"as a Quasi-natural Experiment

Administrative regions are an important environment for the operation of China's market economy.The relevant economic subjects cannot predict the policy of adjustment of administrative divisions and carry out conscious migration behavior,adjustment of administrative divisions can be regarded as a quasi-natural experiment.The three cities of Hefei,Wuhu,and Ma'anshan,which are directly related to the adjustment of the administrative division of Chaohu,are taken as the treatment group,and the seven adjacent cities of Lu'an,Huainan,Chuzhou,Bengbu,Anqing,Chizhou,and Tongling are taken as the control group.Differences-in-Differences method and relevant control variables affecting the upgrading of industrial structure are used to test.The test results show that"Partitions of Chaohu"has a significant industrial structure upgrading effect by promoting the optimization of spatial layout,the cross-regional flow of production factors and the effective management of Chaohu Lake Basin.At the same time,the increase of total retail sales of consumer goods,urban fixed assets investment,public utility expenses in science,education,culture and health,and population plays a significant positive role in promoting the upgrading of industrial structure,while foreign direct investment plays a certain inhibition role in the upgrading of industrial structure.In order to meet the ever-developing space demands and enhance the impact on surrounding areas,the Hefei metropolitan area should be driven by technological innovation,strengthen the integration of industrial chains,improve the business environment and transportation network,and continuously promote the upgrading of industrial structure and the formation and development of new productive forces.

Modeling the Seasonal Temperature from Hourly Data: Seasonal Divisions

In this work, we present a general theoretical study leading to analytical expression of the seasonal temperature at the near surface that is expected to evaluate any area seasonal temperature of the world using the least square method to fit the hourly data to the theoretical curve of the temperature. It is shown that the temperature is globally the result of two contributions: the contribution of the revolution movement of the terrestrial globe on its elliptical orbit around the sun, the contribution of the spin-orbit coupling for the rotation movement of the terrestrial globe around its polar axis and its revolution movement. The orbital behavior of the temperature is used to find the seasonal divisions of the climate for the local area considered. The whole expression of the temperature is very useful for the meteorological needs. The contribution of the human activities and natural instabilities are the results of discrepancies which increase errors (standard deviations).

"Made in China" Reflects Low Added-value in Global Industrial Divisions

The Belle Corporation is a Chinese domestic shoe maker and seller. It also belongs to an industry that has come to be representative of the ubiquitous "Made in China" label. One of the main reasons the company is favored by global investors is due to its unique business pattern-a pattern that sets manufacturing as its base and is active in exploring industrial chain downstream links and establishing its own individual retail channels. Ever since its first inception in the stock market, Belle has set out to acquire several upstream manufacturing companies, indicating its desire for increasing channel terminals. Using a vertically integrated competition strategy, Belle stands out amongst its rivals as being particularly successful in the non-mainstream manufacturing sector. Consequently, its business practices can be used as a model for other domestic manufacturing companies in their efforts to meet the challenges posed by globalization.

Soft and Hard Tissue Changes Following Treatment of Class Ⅱ Division 1 Malocclusion with Twin-Block and Myofunctional Appliance: A Pilot Study

Background Many cases of ClassⅡdeformities have been reported to be treated with prefabricated appliances.The aim of this study was to distinguish the clinical effect of traditional custom-made appliances and prefabricated appliances in the treatment of ClassⅡdivision 1 malocclusion.Therefore,soft and hard tissue changes following treatment of ClassⅡdivision 1 malocclusion using the twin-block(TB)appliance was compared to that using the Myofunctional Research Company(MRC)appliance(K1+K2)combined with oral myofunctional treatment(OMT)(MRC+OMT).Methods The study included 22 children(6 boys and 16 girls aged 9–11 years)with ClassⅡdivision 1 malocclusion along with mandibular retrognathism with a 5–12 mm overjet,basic normal maxillary status,and stage 2 or 3 cervical vertebral maturation(CVM).Participants were randomly assigned into two groups,the TB group and the MRC+OMT group for 12 months.Standardized lateral cephalograms were used to assess skeletal,dental,and soft tissue changes from pre-to post-treatment.Independent t-tests were used to compare the initial and final cephalometric status and tissue changes between the groups.Results The TB and MRC+OMT groups resulted in different degrees of lateral changes;however,improvements of skeletal and soft tissue indices were significantly greater in the TB group than in the MRC+OMT group.Conclusion TB was more effective than MRC+OMT in treating children aged 9–11 years with ClassⅡdivision 1 malocclusion.However,further research using custom-made appliances with OMT is recommended,and further investigations are needed to confirm these findings.

Division of Free Nuclei in Rice Endosperm and Its Influencing Factors

The division process of endosperm in rice and its influencing factors were investigated. Total dissection, resin embedding and sectioning under light and transmission electron microscopes were used to observe the division patterns of free nuclei and cytological characters of an endosperm. The various division patterns of free nuclei in rice endosperm included mitosis, amitosis, and the mitosis to amitosis change without an interphase. The division velocity of free nuclei in rice endosperm varied with the internucleus distance. Comparing to a cluster, the division velocity increased when the free nuclei were separated from each other. Moderately higher temperatures also enhanced the proliferation and shortened the division cycle of free nuclei in rice endosperm. To a certain extent, nitrogenous fertilizer applied at the booting stage together with a moderate drought treatment accelerated the division of free nuclei as well.

A VERIFICATION ON DIVISION OF HYDROCLIMATIC AREA IN CHINA SEAS USING DIGITAL CHARACTERISTIC OF FREQUENCY DISTRIBUTION

oceanographic data files on the China Seas prepared by the National Marine Data and Information Service, SOA, China and the '30-year (1953-1982) Reports of Sea Surface Monthly Mean Temperature in the East China Sea by the Meteorological Agency, Japan,' were used to calculate the digital characteristics of frequency distribution of sea and air temperature in 153 areas in the China Seas. Principal factor analysis and fuzzy cluster ISODATA were used to divide the China hydroclimatic area into three climatic zones including ten climatic regions. It is concluded that the characteristic values derived by this method may completely show the characteristics of frequency distribution of sea and air temperature in the studied area and the final division of hydroclimatic area is fully coincident with the author's former result [2].

Real-Time Upstream Services Demonstration in Orthogonal Frequency Division Multiplexing- Passive Optical Network System

Abstract： Real-time digital service and mul- timedia service upstream transmission in Dig- ital Signal Processing （DSP）-based Orthogo- nal Frequency Division Multiplexing-Passive Optical Network （OFDM-PON） is experimen- tally demonstrated with Centralised Light Sou- rce （CLS） configuration in this paper. After transmitted over 25 km Standard Single Mode Fibre （SSMF） with -16.5 dBm optical power at receiver, the Bit Error Rate （BER） is 9.5 ×10^-11. The implementations of digital domain up-conversion and down-conversion based on Field Programmable Gate Array （FPGA） are int- roduced, which can reduce the cost of In-ph- ase and Quadrature （IQ） radio frequency mix- ers utilised at transmitter and receiver. A car- rier synchronization algorithm is implemented for compensating carrier offset. A channel eq- ualization algorithm is adopted for compen- sating the damage of channel. A new structure of Frequency Synchronization Unit （FSU） des- igned in FPGA is also proposed to cope with the frequency shifting at receiver.

Performance Evaluation of Wavelength Division Multiplexing Photonic Analogue-to-Digital Converters for High-Resolution Radar Systems

The performance of the wavelength division multiplexing (WDM) photonic analogue-to-digital converter (ADC) used for digitization of high-resolution radar systems is evaluated numerically by using the peak signal-to-noise ratio (SNR) metric. Two different WDM photonic ADC architectures are considered for the digitization of radar signals with 5 GHz of bandwidth (spatial resolution of 3 cm), in order to provide a comprehensive study of the compromises present when deploying radar signals with high-resolution: 1) a four-channel architecture with each channel employing an ADC with 5 GSamples/s, and 2) an eight-channel architecture with each channel employing an ADC with 2.5 GSamples/s. For peak powers of the pulsed source between 10 and 20 dBm and a distance between the radar antenna and the sensing object of 2.4 meters, peak SNR levels between 29 and 39 dB are achieved with the eight-channel architecture, which shows higher peak SNR levels when compared with the four-channel architecture. For the eight-channel architecture and for the same peak powers of the pulsed source, peak SNR levels between 11 and 16 dB are obtained when the distance increases to 13.5 meters. With this evaluation using the peak SNR, it is possible to assess the performance limits when choosing a specific radar range, while keeping the same resolution.

The Effect and Compensation of Phase Noise on Orthogonal Frequency Division Multiplexing (OFDM) System

Orthogonal Frequency Division Multiplexing (OFDM) is characterized by its high data rate. However, the modulation method used in the system is subject to the influence of phase noise due to the need of time synchronization. In this paper, an algorithm based on MMSE (minimum mean square error) is developed to compensate the influence of both the common phase error (CPE) and inter carrier interference (ICI), which are two aspects of phase noise, under common Gaussian white noise. The result of noise cancellation is presented in signal-to-noise ratio (SNR) and symbol error rate (SER). Like digital signal in general, SNR can reduce SER with or without phase noise compensation. The compensation of phase noise significantly reduces the SER of the decoded signal. However, the bandwidth of phase noise still determines the signal accuracy. Under high bandwidth of phase noise, increasing SNR will only slightly increase SER, which is not efficient.