Novel physical models for leakage current analysis in 65 nm technology are proposed. Taking into consideration the process variations and emerging effects in nano-scaled technology, the presented models are capable of...Novel physical models for leakage current analysis in 65 nm technology are proposed. Taking into consideration the process variations and emerging effects in nano-scaled technology, the presented models are capable of accurately estimating the subthreshold leakage current and junction tunneling leakage current in 65 nm technology. Based on the physical models, new table look-up models are developed and first applied to leakage current analysis in pursuit of higher simulation speed. Simulation results show that the novel physical models are in excellent agreement with the data measured from the foundry in the 65 nm process, and the proposed table look-up models can provide great computational efficiency by using suitable interpolation techniques. Compared with the traditional physical-based models, the table look-up models can achieve 2.5X speedup on average on a variety of industry circuits.展开更多
The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at ...The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.展开更多
A dynamic global vegetation model （DGVM） coupled with a land surface model （LSM） is generally initialized using a spin-up process to derive a physically-consistent initial condition. Spin-up forcing, which is the ...A dynamic global vegetation model （DGVM） coupled with a land surface model （LSM） is generally initialized using a spin-up process to derive a physically-consistent initial condition. Spin-up forcing, which is the atmospheric forcing used to drive the coupled model to equilibrium solutions in the spin-up process, varies across earlier studies. In the present study, the impact of the spin-up forcing in the initialization stage on the fractional coverages （FCs） of plant functional type （PFT） in the subsequent simulation stage are assessed in seven classic climate regions by a modified Community Land Model’s Dynamic Global Vegetation Model （CLM-DGVM）. Results show that the impact of spin-up forcing is considerable in all regions except the tropical rainforest climate region （TR） and the wet temperate climate region （WM）. In the tropical monsoon climate region （TM）, the TR and TM transition region （TR-TM）, the dry temperate climate region （DM）, the highland climate region （H）, and the boreal forest climate region （BF）, where FCs are affected by climate non-negligibly, the discrepancies in initial FCs, which represent long-term cumulative response of vegetation to different climate anomalies, are large. Moreover, the large discrepancies in initial FCs usually decay slowly because there are trees or shrubs in the five regions. The intrinsic growth timescales of FCs for tree PFTs and shrub PFTs are long, and the variation of FCs of tree PFTs or shrub PFTs can affect that of grass PFTs.展开更多
The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is...The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.展开更多
Objective: To construct Markov model for clinical follow up data and predict the number of survivals and deaths. Methods: The state of patients was classified into survival. death and censorship. The weighted least sq...Objective: To construct Markov model for clinical follow up data and predict the number of survivals and deaths. Methods: The state of patients was classified into survival. death and censorship. The weighted least squares method was used for estimating parameters. Results: Markov model for survival analysis of follow--up data was presented. By using an example, the transition probability matrices were obtained and the number of survivals and deaths at each observation point was predicted respectively. Conclusion: Markov model constructed in the present study to analyze clinical follow up data could be used as effective supplemention for life table analysis.展开更多
By introducing the logistic-like technology, the classical Solow-Swan model is extended to inquire the technological overflow and catch-up of the developing economy in this paper. The improved model is described by a ...By introducing the logistic-like technology, the classical Solow-Swan model is extended to inquire the technological overflow and catch-up of the developing economy in this paper. The improved model is described by a two-dimensional dynamical system. It is proved that the model has a unique equilibrium which is a sink and the solution of the equation is globally asymptotically stable. And the classical Solow-Swan model is a special case of the model given here. The economic growth patterns are discussed by phase portrait analysis at the end of this paper.展开更多
A neural network friction model with very good prediction accuracy was developed on the basis of industrial data. Simulative calculation indicated that the accuracy of rolling force and motor power calculation can be ...A neural network friction model with very good prediction accuracy was developed on the basis of industrial data. Simulative calculation indicated that the accuracy of rolling force and motor power calculation can be improved using the calculated friction coefficient. It was found that reduction ratio and deformation resistance of strip has more effects than other parameters, and the effects of most parameters are affected by rolling speed.展开更多
基金supported by the State Key Development Program for Basic Research of China (No. 2006CB302700).
文摘Novel physical models for leakage current analysis in 65 nm technology are proposed. Taking into consideration the process variations and emerging effects in nano-scaled technology, the presented models are capable of accurately estimating the subthreshold leakage current and junction tunneling leakage current in 65 nm technology. Based on the physical models, new table look-up models are developed and first applied to leakage current analysis in pursuit of higher simulation speed. Simulation results show that the novel physical models are in excellent agreement with the data measured from the foundry in the 65 nm process, and the proposed table look-up models can provide great computational efficiency by using suitable interpolation techniques. Compared with the traditional physical-based models, the table look-up models can achieve 2.5X speedup on average on a variety of industry circuits.
文摘The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.
基金supported by the Chinese Academy of Sciences under Grant No.KZCX2-YW-219State Key Project for Basic Research Program of China(973)under Grant No.2010CB951801Key Program of National Natural Science Foundation under Grant No.40830103
文摘A dynamic global vegetation model （DGVM） coupled with a land surface model （LSM） is generally initialized using a spin-up process to derive a physically-consistent initial condition. Spin-up forcing, which is the atmospheric forcing used to drive the coupled model to equilibrium solutions in the spin-up process, varies across earlier studies. In the present study, the impact of the spin-up forcing in the initialization stage on the fractional coverages （FCs） of plant functional type （PFT） in the subsequent simulation stage are assessed in seven classic climate regions by a modified Community Land Model’s Dynamic Global Vegetation Model （CLM-DGVM）. Results show that the impact of spin-up forcing is considerable in all regions except the tropical rainforest climate region （TR） and the wet temperate climate region （WM）. In the tropical monsoon climate region （TM）, the TR and TM transition region （TR-TM）, the dry temperate climate region （DM）, the highland climate region （H）, and the boreal forest climate region （BF）, where FCs are affected by climate non-negligibly, the discrepancies in initial FCs, which represent long-term cumulative response of vegetation to different climate anomalies, are large. Moreover, the large discrepancies in initial FCs usually decay slowly because there are trees or shrubs in the five regions. The intrinsic growth timescales of FCs for tree PFTs and shrub PFTs are long, and the variation of FCs of tree PFTs or shrub PFTs can affect that of grass PFTs.
文摘The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.
文摘Objective: To construct Markov model for clinical follow up data and predict the number of survivals and deaths. Methods: The state of patients was classified into survival. death and censorship. The weighted least squares method was used for estimating parameters. Results: Markov model for survival analysis of follow--up data was presented. By using an example, the transition probability matrices were obtained and the number of survivals and deaths at each observation point was predicted respectively. Conclusion: Markov model constructed in the present study to analyze clinical follow up data could be used as effective supplemention for life table analysis.
基金Supported by the National Natural Science Foundation of China (79970104)
文摘By introducing the logistic-like technology, the classical Solow-Swan model is extended to inquire the technological overflow and catch-up of the developing economy in this paper. The improved model is described by a two-dimensional dynamical system. It is proved that the model has a unique equilibrium which is a sink and the solution of the equation is globally asymptotically stable. And the classical Solow-Swan model is a special case of the model given here. The economic growth patterns are discussed by phase portrait analysis at the end of this paper.
文摘A neural network friction model with very good prediction accuracy was developed on the basis of industrial data. Simulative calculation indicated that the accuracy of rolling force and motor power calculation can be improved using the calculated friction coefficient. It was found that reduction ratio and deformation resistance of strip has more effects than other parameters, and the effects of most parameters are affected by rolling speed.
