Transparent glass fiber reinforced composites films ware fabricated by UV light induced chemical crosslinking of composite materials consisting of glass fiber and UV curable resin in film state. In order to apply film...Transparent glass fiber reinforced composites films ware fabricated by UV light induced chemical crosslinking of composite materials consisting of glass fiber and UV curable resin in film state. In order to apply film to flexible device, excellent flexural property is required, then the delamination should not occurred between glass fiber and UV curable resin when film is bent. To minimize delamination and improve the interfacial adhesion at interface between glass fiber and UV curable resin, the γ-aminopropyl triethoxy silane and γ-glycid oxypropyl trimethoxy silane were applied for the surface treatment of glass fibers. Silanization of glass fiber surface was checked by scanning electron microscopy and the degree of delamination of composite film was confirmed through the bending test, ASTEM290-96a, used by haze meter.展开更多
CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets wit...CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets with different molar ratio of CeO2 to TiO2 （CeO2：TiO2-0：1.0; 0.1：0.9; 0.2：0.8; 0.3：0.7; 0.4：0.6; 0.5：0.5; 0.6：0.4; 0.7：0.3; 0.8：0.2; 0.9：0.1; 1.0：0）. The films are characterized by UV-visible transmission and infrared reflection spectra, scanning electron microscopy （SEM）, Raman spectroscopy, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The obtained results show that the amorphous phases composed of CeO2-TiO2 play an important role in absorbing UV, there are Ce^3-, Ce^4- and Ti^4- on the surface of the films; the glass substrates coated with CeO2-TiO2 （Ce/Ti=0.5：0.5; 0.6：0.4）/SnO2：Sb（6 mol%） double films show high absorbing UV（〉99）, high visible light transmission （75%） and good infrared reflection （〉70%）. The sheet resistance of the films is 30-50 Ω/□. The glass substrates coated with the double functional films can be used as window glass of buildings, automobile and so on.展开更多
Glass system (80% B2O3 – (20 – y)% Na2CO3 – y% CdO, where y = 3, 6, 9, 12 and 15 mol%) prepared by meltquenching technique and checked by XRD technique reveals the amorphous nature of these glasses. Increases in de...Glass system (80% B2O3 – (20 – y)% Na2CO3 – y% CdO, where y = 3, 6, 9, 12 and 15 mol%) prepared by meltquenching technique and checked by XRD technique reveals the amorphous nature of these glasses. Increases in density from 2.18 to 2.82 (g/cm3) were observed with an increase in CdO content. Ultraviolet-Visible (UV-VIS) absorption spectra of polished parallel surfaces glass samples showed a decrease in the optical band gap from 3.72 to 3.59 eV with increasing CdO content. The results suggest that CdO content in glass samples plays a role as a network modifier. In addition, a correlation between the results from density, UV-VIS and FTIR measurements indicates that change in the atomic structure is due to the formation of BO4 units.展开更多
Silver doped sodium borate glasses prepared by melt-quenching technique were checked by XRD technique for their amorphous nature. It is observed that the molar volume increases with increasing Ag2O content leading to ...Silver doped sodium borate glasses prepared by melt-quenching technique were checked by XRD technique for their amorphous nature. It is observed that the molar volume increases with increasing Ag2O content leading to open struc- ture. Fourier Transform Infrared spectroscopy (FTIR) reveals the formation of BO3 and BO4 groups upon addition of silver oxide as modifier. From the Ultraviolet-Visible (UV-VIS) absorption spectra it is seen that the optical band gap increases with the increase of Ag2O content. Urbach energy is observed between 0.55 - 0.77 eV. The results obtained from molar volume, Fourier Transform Infrared spectroscopy and band gap energy measurements are in agreement with each other and nearly give the similar information about the studied glasses.展开更多
文摘Transparent glass fiber reinforced composites films ware fabricated by UV light induced chemical crosslinking of composite materials consisting of glass fiber and UV curable resin in film state. In order to apply film to flexible device, excellent flexural property is required, then the delamination should not occurred between glass fiber and UV curable resin when film is bent. To minimize delamination and improve the interfacial adhesion at interface between glass fiber and UV curable resin, the γ-aminopropyl triethoxy silane and γ-glycid oxypropyl trimethoxy silane were applied for the surface treatment of glass fibers. Silanization of glass fiber surface was checked by scanning electron microscopy and the degree of delamination of composite film was confirmed through the bending test, ASTEM290-96a, used by haze meter.
基金the program for Changjiang Scholars and Innovative Research Team in University (No.IRT0547
文摘CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets with different molar ratio of CeO2 to TiO2 （CeO2：TiO2-0：1.0; 0.1：0.9; 0.2：0.8; 0.3：0.7; 0.4：0.6; 0.5：0.5; 0.6：0.4; 0.7：0.3; 0.8：0.2; 0.9：0.1; 1.0：0）. The films are characterized by UV-visible transmission and infrared reflection spectra, scanning electron microscopy （SEM）, Raman spectroscopy, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The obtained results show that the amorphous phases composed of CeO2-TiO2 play an important role in absorbing UV, there are Ce^3-, Ce^4- and Ti^4- on the surface of the films; the glass substrates coated with CeO2-TiO2 （Ce/Ti=0.5：0.5; 0.6：0.4）/SnO2：Sb（6 mol%） double films show high absorbing UV（〉99）, high visible light transmission （75%） and good infrared reflection （〉70%）. The sheet resistance of the films is 30-50 Ω/□. The glass substrates coated with the double functional films can be used as window glass of buildings, automobile and so on.
文摘Glass system (80% B2O3 – (20 – y)% Na2CO3 – y% CdO, where y = 3, 6, 9, 12 and 15 mol%) prepared by meltquenching technique and checked by XRD technique reveals the amorphous nature of these glasses. Increases in density from 2.18 to 2.82 (g/cm3) were observed with an increase in CdO content. Ultraviolet-Visible (UV-VIS) absorption spectra of polished parallel surfaces glass samples showed a decrease in the optical band gap from 3.72 to 3.59 eV with increasing CdO content. The results suggest that CdO content in glass samples plays a role as a network modifier. In addition, a correlation between the results from density, UV-VIS and FTIR measurements indicates that change in the atomic structure is due to the formation of BO4 units.
文摘Silver doped sodium borate glasses prepared by melt-quenching technique were checked by XRD technique for their amorphous nature. It is observed that the molar volume increases with increasing Ag2O content leading to open struc- ture. Fourier Transform Infrared spectroscopy (FTIR) reveals the formation of BO3 and BO4 groups upon addition of silver oxide as modifier. From the Ultraviolet-Visible (UV-VIS) absorption spectra it is seen that the optical band gap increases with the increase of Ag2O content. Urbach energy is observed between 0.55 - 0.77 eV. The results obtained from molar volume, Fourier Transform Infrared spectroscopy and band gap energy measurements are in agreement with each other and nearly give the similar information about the studied glasses.
