Zr55Al10Ni5Cu30 bulk metallic glass was prepared through water-cooled copper mold suction casting, and was rolled up to 95% in thickness reduction. The structures and thermal stabilities of the as-cast and as-rolled s...Zr55Al10Ni5Cu30 bulk metallic glass was prepared through water-cooled copper mold suction casting, and was rolled up to 95% in thickness reduction. The structures and thermal stabilities of the as-cast and as-rolled specimens were examined by X-ray diffractometer and differential scanning calorimeter. As the thickness reduction increases, the crystallization onset temperature, peak temperature and the apparent activation energy of crystallization almost keep constant, while the glass transition temperature decreases from 681 to 671 K and the apparent activation energy of glass transition increases from (404±26) to (471±29) kJ/mol. The glass transition process is markedly affected by the rolling induced changes of microstructure and structural relaxation.展开更多
This article mainly carries on the finite element value simulation using the DEFORM-3D software to the glass rolling distortion process and mainly studies the relationship between the roller pressure and the forming r...This article mainly carries on the finite element value simulation using the DEFORM-3D software to the glass rolling distortion process and mainly studies the relationship between the roller pressure and the forming roll diameter, the rotational speed as well as the under press rate. The result indicated that, its analogue result states the result basically with the traditional theory consistent.展开更多
Solar rolled glass,with one micro-structure surface and another roughness surface,can cause diffuse refraction of the focused laser spot,and this phenomenon restricts the application of laser manufacturing.In this stu...Solar rolled glass,with one micro-structure surface and another roughness surface,can cause diffuse refraction of the focused laser spot,and this phenomenon restricts the application of laser manufacturing.In this study,laser cutting of solar rolled glass with a thickness of 2.5 mm was successfully achieved with the help of dimethicone to ensure laser focusing.Dimethicone was coated on the top surface of the rolled glass processing zone,and a bottom–up multilayer increment with the spiral line was applied to control the cutting path.Different viscosity values of dimethicone were considered.Results showed that surface quality increased as the viscosity increased until a certain threshold was reached;afterward,the surface quality decreased or directly caused the cutting to fail.The minimum surface roughness(3.26µm)of the processed surface(chipping:Width≤113.64µm,area 215199µm)was obtained when the dimethicone viscosity and laser pulse frequency were 1000 mm/s and 43 kHz(power 25.4 W),respectively.The micro-defects on the processed surface were few,and the edge chipping width and depth of the laser processed surface were small.展开更多
基金Project(50671066) supported by the National Natural Science Foundation of China
文摘Zr55Al10Ni5Cu30 bulk metallic glass was prepared through water-cooled copper mold suction casting, and was rolled up to 95% in thickness reduction. The structures and thermal stabilities of the as-cast and as-rolled specimens were examined by X-ray diffractometer and differential scanning calorimeter. As the thickness reduction increases, the crystallization onset temperature, peak temperature and the apparent activation energy of crystallization almost keep constant, while the glass transition temperature decreases from 681 to 671 K and the apparent activation energy of glass transition increases from (404±26) to (471±29) kJ/mol. The glass transition process is markedly affected by the rolling induced changes of microstructure and structural relaxation.
文摘This article mainly carries on the finite element value simulation using the DEFORM-3D software to the glass rolling distortion process and mainly studies the relationship between the roller pressure and the forming roll diameter, the rotational speed as well as the under press rate. The result indicated that, its analogue result states the result basically with the traditional theory consistent.
基金supported by the National Natural Science Foundation of China(Grant No.51905191)the Major Project of Science and Technology Innovation Special Project for Hubei Province,China(Grant No.2018AAA027)Wuhan Science and Technology Planning Project,China(Grant No.201903070311520).
文摘Solar rolled glass,with one micro-structure surface and another roughness surface,can cause diffuse refraction of the focused laser spot,and this phenomenon restricts the application of laser manufacturing.In this study,laser cutting of solar rolled glass with a thickness of 2.5 mm was successfully achieved with the help of dimethicone to ensure laser focusing.Dimethicone was coated on the top surface of the rolled glass processing zone,and a bottom–up multilayer increment with the spiral line was applied to control the cutting path.Different viscosity values of dimethicone were considered.Results showed that surface quality increased as the viscosity increased until a certain threshold was reached;afterward,the surface quality decreased or directly caused the cutting to fail.The minimum surface roughness(3.26µm)of the processed surface(chipping:Width≤113.64µm,area 215199µm)was obtained when the dimethicone viscosity and laser pulse frequency were 1000 mm/s and 43 kHz(power 25.4 W),respectively.The micro-defects on the processed surface were few,and the edge chipping width and depth of the laser processed surface were small.
