Shaped beam pattern synthesis with desired nulling level and minimum sidelobe level

For the anti-interference/denoise purpose,it usually requires minimizing the sidelobe level(SLL)of a wide-beam pattern with a desired low nulling level(NL)in the nulling region.To realize such an objective,the shaped-beam pattern synthesis(SBPS)is the most commonly used approach.However,since the SBPS problem focuses on synthesizing a predetermined beam shape,the minimum SLL via this approach cannot ensure to obtain the maximum power gain.Conversely,it cannot obtain the lowest SLL with a certain power gain requirement.Based on such consideration,this paper tries to further minimize SLL of a wide-beam pattern with a desired low NL nulling region,by solving the power gain pattern synthesis(PGPS)problem.The PGPS problem selects the array excitation by directly optimizing the power gain.Hence,it has the potential to reduce SLL,when achieving the equal mainlobe power gain constraint via SBPS.An iterative algorithm which converts the primal optimization problem into convex sub-problems is proposed,resulting in an effective problem-solving scheme.Numerical simulations demonstrate the proposed algorithm can obtain about 10-dB lower SLL than the existing algorithms.

Developing Three-Dimensional Beamshaping Techniques on Volumetric Random Arrays to Suppress Array Sidelobes

This paper proposes a three-dimensional (3-D) amplitude tapering technique on volumetric random arrays to minimize array sidelobes and emulate phased array operations on mobile platforms. Our ultimate goal is to realize wireless phased array applications carried out by mobile platforms;in this paper, we focus on the development of collaborative beamforming algorithms. This beamshaping technique mitigates the discontinuity of the current distribution along the array aperture and lower array sidelobe level (SLL) by specially paying attention to the array element’s depth deviation. In this work, step by step amplitude tapering procedures are clearly illustrated. Further, a reconfigurable phased array with sixteen patch antennas is tested to verify the fidelity of the 3-D beamshaping algorithm. Measured and simulated radiation patterns are benchmarked to evaluate the sidelobe suppression results, and the best sidelobe suppressed region is around the array’s main beam.

COMPUTER SIMULATION FOR AN ULTRA-LOW RANGE SIDELOBE PULSE COMPRESSION SCHEME

A canceling range sidelobes scheme has been suggested by Yang Guangzheng, et al.,(1997) this technology is based on the fact that all sidelobe of group correlation function of ideal sets are zero. At first, this paper gives the best ideal sets (i. e. the best biphase code sets whose maximal sidelobe not more than 2) for all code length N≤12, which have been obtained from binary sequences by means of the best codes sieving method suggested by Yang Guangzheng, et al.(1997) Computer simulation for group correlation property of best ideal sets for code length N=12 on various conditions is made. Simulation result shows that the sidelobe level of best ideal set with no weighting is zero, under condition of zero-Doppler shift and has ultra-low sidelobe on Doppler up to 5kHz with no weighting and whose tolerance of phase and amplitude distortion is bigger too.

Experimental study of the influencing factors and mechanisms of the pressure-reduction and augmented injection effect by nanoparticles in ultra-low permeability reservoirs

Nanoparticles(NPs)have gained significant attention as a functional material due to their ability to effectively enhance pressure reduction in injection processes in ultra-low permeability reservoirs.NPs are typically studied in controlled laboratory conditions,and their behavior in real-world,complex environments such as ultra-low permeability reservoirs,is not well understood due to the limited scope of their applications.This study investigates the efficacy and underlying mechanisms of NPs in decreasing injection pressure under various injection conditions(25—85℃,10—25 MPa).The results reveal that under optimal injection conditions,NPs effectively reduce injection pressure by a maximum of 22.77%in core experiment.The pressure reduction rate is found to be positively correlated with oil saturation and permeability,and negatively correlated with temperature and salinity.Furthermore,particle image velocimetry(PIV)experiments(25℃,atmospheric pressure)indicate that the pressure reduction is achieved by NPs through the reduction of wall shear resistance and wettability change.This work has important implications for the design of water injection strategies in ultra-low permeability reservoirs.

Optimization of Gas-Flooding Fracturing Development in Ultra-Low Permeability Reservoirs

Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.

Properties of Ultra-low Thermal Expansion LAS Transparent Glass-ceramics Prepared by Spodumene

The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of glass-ceramics.And the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.

Implementation of broadband low-sidelobe beamforming in time domain

In modern active and passive sonar systems, broadband beamforming for acoustic arrays is widely used to suppress unwanted interference and to detect target signals of interest. A broadband low sidelobe beamforming scheme in time domain is proposed in this paper. The first step of this scheme is to delay the outputs of each element in the acoustic array by a tapped-delay-line (TDL) to accomplish the integer part of the time delay need to form a beam. Then, finite impulse response (FIR) digital filters are used to implement the fractional part of the time delay. The weighting coefficients for all array elements at different frequencies to realize the low sidelobe beams are also implemented with the FIR digital filters. Finally, the outputs of the digital filters are summed up to yield the time domain beam output. The design of low sidelobe beam pattern and that of the FIR digital filters are two crucial technical issues in this beamforming procedure. The low sidelobe beams of each sub-band are designed using the optimized beam synthesis approach based on the principle of MVDR beamforming. An improved adaptive approach are used for the design of FIR digital filters, and the design requirements of these filters were specified by the weights of low sidelobe beams of each sub-band over the broad frequency band. Results of computer simulation for a twelve-element arc array show that the beamforming scheme is very effective in forming low sidelobe broadband beam.

Channel Mismatching in Sidelobe Canceler: Limitations and Remedies

After a brief recall of the Sidelobe Canceler (SLC) working principle, including the derivation of a general formula for the Cancellation Ratio (CR), the effects of channel mismatching are investigated. In particular, curves providing CRvalues as a function of amplitude and phase channel mismatching, radar bandwidth, and jammer direction of arrival (JDOA) are provided for the cases of one and two auxiliary antennas. Subsequently, a time -space processor for performance restoration is analyzed in detail. In addition to the above mentioned quantities, the attainable CR value is expressed as a function of the space-time processor parameters. The contribution of the paper is related to the derivation of a number of mathematical equations of CR for several cases of practical interest for the radar engineer. In addition, several curves are presented to assist design of SLC systems.

High sidelobe effects on interferometric coherence for circular SAR imaging geometry

The coherence is a measure for the accuracy of the interferometric phase, and the synthetic aperture radar （SAR） inter- ferometric coherence is affected by several sources of the decor- relation noise. For the circular SAR （CSAR） imaging geometry, the system response function is in the form of the Bessel function which brings a high sidelobe, and the high sidelobe of CSAR will be an important factor influencing the interferometric coherence. The effect of the high sidelobe on the coherence is analyzed and deduced. Based on the interferometric characteristics of the slight difference in the viewing angles and the potential pixel off- set in the interferometric SAR （InSAR） images, a relation between the radar impulse response and the coherence loss function is derived. From the relational model, the coherence loss function due to the high sidelobe of CSAR is then deduced, and compared with that of the conventional SAR. It is shown that the high sidelobe of CSAR focusing signal will severely affect the baseline decorre- lation and coregistration decorrelation. Simulation results confirm the theoretical analysis and quantitatively show the baseline and coregistration decorrelation degradation due to the high sidelobes of CSAR.

Low sidelobe robust imaging in random frequency-hopping wideband radar based on compressed sensing

High resolution range imaging with correlation processing suffers from high sidelobe pedestal in random frequency-hopping wideband radar. After the factors which affect the sidelobe pedestal being analyzed, a compressed sensing based algorithm for high resolution range imaging and a new minimized ll-norm criterion for motion compensation are proposed. The random hopping of the transmitted carrier frequency is converted to restricted isometry property of the observing matrix. Then practical problems of imaging model solution and signal parameter design are resolved. Due to the particularity of the proposed algorithm, two new indicators of range profile, i.e., average signal to sidelobe ratio and local similarity, are defined. The chamber measured data are adopted to testify the validity of the proposed algorithm, and simulations are performed to analyze the precision of velocity measurement as well as the performance of motion compensation. The simulation results show that the proposed algorithm has such advantages as high precision velocity measurement, low sidelobe and short period imaging, which ensure robust imaging for moving targets when signal-to-noise ratio is above 10 dB.

Analysis of Effects of System Mismatches on the Performance of Adaptive Generalized Sidelobe Canceller and Compensation Methods

The effect of system mismatches on an adaptive linear constrained generalized sidelobe canceller （LC-GSC） is discussed in this paper. Based on the array gain index, two classic system mismatches, the direction of arrival （DOA） mismatch and the mismatches arising from array disturbance, are studied, respectively. To obtain the effective methods for compensating for the system mismatches, we analyze the performance of the improved LC-GSC with the diagonal loading and additional constraints （such as the directional constraints and derivative constraints）. The computer simulations show that the techniques of diagonal loading and additional constraints can effectively compensate for the system mismatches. The loss of array gains can be controlled within 3 dB in the presence of 20% of array disturbances or DOA mismatch when the signal-to-noise ratio is less than 10 dB. The analysis illustrates that the proposed compensation methods are valid and feasible.

A New Range Sidelobe Suppression Technique for Randomly Intermittent Spectra HF Radar Signal

The randomly intermittent spectra (RIS) signal is employed to combat spectrum congestion in radar and other radio services to evade the external interferences in high-frequency (HF) and ultrahigh-frequency (UHF) bands. However, the spectra discontinuity of the signal gets rise to high range sidelobes when matching the reflected echo, which is much more difficult for targets detection. So it is indispensable to investigate the technique for sidelobes suppression of the range profile when RIS signal is utilized, This paper introduced a new processing technique based on time domain filtering to lower the range sidelobes. A robust and effetive algorithm is adopted to solve the coefficients of the filter, and the restriction on the desired response of the filter is derived. The simulation results show that the peak range sidelobe can be reduced to -27 dB from -9.5 dB while the frequency band span (FBS) is 200 kHz.

Beamforming with the Generalized Sidelobe Cancellerfor Coherent Noise Attenuation in 3D Seismic Data

This paper presents a new approach for attenuating coherent noise in 3D seismic data. An adaptive beamforming with generalized sidelobe canceller (GSC) design methodology is utilized here as a general form of linearly constrained adaptive beamforming structure. It consists of a fixed beamformer, and a signal-blocking matrix in front of an unconstrained adaptive beamformer.Considerationf of the complexity of the geometry for 3D seismic survey, the 3D beamforming with GSC technique is developed with two key points: (1) sorting along azimuth sections to simplify the relationship between traveltime and offset from 3D to 2D, and (2) dynamic binning scheme to avoid the possible poor folding in some azimuth sections. Both simulation result and real data example show that the newly developed 3D beamforming with GSC yields more credible results at a relative low cost, sufficient stability and good resolution.

EFFECTS OF RANDOM ERRORS ON THE SIDELOBE FOR THE LINEAR ARRAY

The effects of statistically dependent random errors on the sidelobe are analyzed for the linear array. It is shown that the random errors cause a rise in the sidelobe level. The simple formulas can also be obtained for the case of independent random errors.

LOW SIDELOBE APERTURE DISTRIBUTION OF MULTI-STEP AMPLITUDE QUANTIZATION WITH PEDESTAL

A low sidelobe aperture design method of multi-step amplitude quantization with pedestal is proposed, and general analysis and formulas are described. The computation results compared with our previous method "Multi-Step Amplitude Quantization(MSAQ)" on peak side-lobe level, aperture efficiency, normalized input power and sidelobe degradation with tolerance are given. It is shown that, under the same conditions, the method presented in this paper is better than the MSAQ.

Antenna Sidelobe Canceller of Kalman Filter

The adaptive array antenna may be considered as a general sidelobe canceller. Directional interference suppression is based on a recursive state estimation of Kalman filter. For the stationary filter,this leads to an iterative solution of Wiener Hops matrix equation. The performance of sidelobe canceller are studied by computer simulation. The result of simulation shows that the sidelobe canceller may be regarded as a special case of an adaptive array atenna.

THE LIMITATION OF MUTUAL IMPEDANCE PRECISION TO THE SIDELOBE LEVEL OF ARRAY ANTENNA

Accurate mutual coupling correction is necessary for an array antenna to reach ultra-low sidelobe level.If the mutual impedance or mutual coupling coefficient matrix of an array isperfectly known,theoretically,one can compensate the effects of mutual coupling completelyand realize the desired low sidelobe level.However,the mutual impedance matrix obtainedwhether by calculation or by measurement has limited precision,which limits the effectiveness ofcompensation.This paper deals with the requirements on the precision of mutual impedance forcompensation in ultra-low sidelobe array antennas.The relationship between mutual impedanceerrors and the amplitude and phase errors of an array is derived,by which the relationship betweenthe mutual impedance errors and the sidelobe level is obtained.

AN EVIDENT SIDELOBE CONTROL METHOD BASED ON NSCT FOR SHIP TARGET IN SAR IMAGES

Evident sidelobe on faint ship target seriously affects the accuracy of the target segmen-tation in Synthetic Aperture Radar(SAR) images.To avoid this problem,a novel sidelobe control method based on NonSubsampled Contourlet Transform(NSCT) for ship targets in SAR images is presented in this paper.This method enhances the SAR images in NSCT domain based on target azimuth estimation and then inhibits the sidelobe directionally in NSCT high-pass frequency subbands.Experimental results on RADARSAT-2 images demonstrate that the proposed method can not only reduce the strong sidelobes effectively,but also enhance the intensity of the objects successfully.Therefore,it gives a good segmentation result on the dark ship images with strong sidelobe,and en-hances the detection rate on these targets.

Sidelobe Suppression in CR-OFDM system by Adding Extended Data Carriers

Out-band radiation is a severe problem for Cognitive Radio with OFDM system (CR-OFDM) which is caused by the sidelobe of OFDM signals. Lots of studies have been done on suppressing the sidelobe power and numerous methods have been proposed. In this paper, we propose a novel method to minimize the sidelobe by adding extended data carrier so called EDC to the original data carriers so as to protect primary user (PU) spectrum. Unlike the methods before, the EDCs are deployed within the secondary user (SU) data frequency spectrum to fully use the spectrum. Moreover, we derive the linear least squares problem to get the optimal weighting factors of EDCs to minimize the sidelobe power which is subject to an original data interference constraint. By simulation, we find that EDC is more capable in sidelobe suppression than method of Cancellation Carrier (CC) while EDC has only a small loss in BER performance.

NOVEL BIPHASE CODE-INTEGRATED SIDELOBE SUPPRESSION CODE

A kind of novel binary phase code named sidelobe suppression code is proposed in this paper. It is defined to be the code whose corresponding optimal sidelobe suppression filter outputs the minimum sidelobes. It is shown that there do exist sidelobe suppression codes better than the conventional optimal codes-Barker codes. For example, the sidelobe suppression code of length 11 with filter of length 39 has better sidelobe level up to 17dB than that of Barker code with the same code length and filter length.