A Compact Ultra-Wideband Circularly Polarized Antenna Array for Vehicular Communications

In this paper,a new compact ultrawideband(UWB)circularly polarized(CP)antenna array for vehicular communications is proposed.The antenna array consists of a 2×2 sequentially rotated T-shaped cross dipole,four parasitic elements,and a feeding network.By loading the T-shaped cross dipoles with parasitic rectangular elements with cut corners,the bandwidth can be expanded.On this basis,the radiation pattern can be improved by the topology with sequential rotation of four T-shaped cross-dipole antennas,and the axial ratio(AR)bandwidth of the antenna also can be further enhanced.In addition,due to the special topology that the vertical arms of all Tshaped cross dipoles are all oriented toward the center of the antenna array,the gain of proposed antenna is improved while the size of the antenna is almost the same as the traditional cross dipole.Simulated and measured results show that the proposed antenna has good CP characteristics,an impedance bandwidth for S11<-10 d B of about 106.1%(3.26:1,1.57-5.12 GHz)and the 3-d B AR bandwidth of about 104.1%(3.17:1,1.57-4.98 GHz),a wide 3-d B gain bandwidth of 73.3%as well as the peak gain of 8.6 d Bic at 3.5 GHz.The overall size of antenna is 0.56λ×0.56λ×0.12λ(λrefers to the wavelength of the lowest operating frequency in free space).The good performance of this compact UWB CP antenna array is promising for applications in vehicular communications.

Feasibility Study of 60 GHz UWB System for Gigabit M2M Communications

In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel measurements and models for both line-of-sight(LOS)and non-LOS(NLOS)scenarios,60 GHz propagation mechanisms are summarized,and 60 GHz UWB link budget and performance are analyzed.Tests are performed for determining ranges and antenna configurations.Results show that gigabit capacity can be achieved with omni-directional antennas configuration at the transceiver,especially in LOS conditions.When the LOS path is blocked by a moving person or by radiowave propagation in the NLOS situation,omni-directional and directional antennas configuration at the transceiver is required,especially for a larger range between machines in office rooms.Therefore,it is essential to keep a clear LOS path in M2M applications like gigabit data transfer.The goal of this work is to provide useful information for standardizations and design of 60 GHz UWB systems.

Design of the small microstrip antenna based on the WLAN/UWB wireless communication system

The antenna,as the component of receiving and sending signals in the front end of the wireless communication system,plays an important role in the communication quality,and is often the main obstacle to the development of the miniaturization of the wireless communication system.The microstrip antenna is composed of a metal radiation patch which can be pasted on the dielectric substrate.The choice of the shape of the metal patch can be arbitrary.The conventional shape is usually chosen as the metal patch to simplify the analysis and prediction of its performance.The dielectric constant of the microstrip antenna substrate is relatively low in order to enhance the field intensity of the edge radiation field.However,the dielectric constant of the substrate needs to be greater than 5 in order to meet the needs of other performance of the microstrip antenna,so that the radiation edge effect cannot be enhanced,resulting in the greater contradictions.

Textile UWB 5G Antenna for Human Blood Clot Measurement

The antenna plays an essential role in the medical industry.The short-range 5th Generation(5G)communication can be used for seamless transmission,reception,patient monitoring,sensing and measuring various processes at high speeds.A passive Ultra Wide Band(UWB)antenna,used as a sensor in the mea-surement of Prothrombin Time(PT)i.e.,blood clot is being proposed.The inves-tigated micro-strip patch UWB antenna operating in the frequency range of 3.1 to 10.6 GHz consists of a circular patch with a diamond-shaped slot made of jeans substrate material with good sensing properties is accomplished by adjusting the copper thickness of the patch.Due to the turbidity in blood plasma,PT measure-ment is the repetitive approach to get accurate value.In order to solve this issue,an antenna is designed,fabricated and analysed to obtain the accurate PT mea-surements from blood plasma.The blood clotting is observed by electromagnetic emitted voltage converted into the frequency range of 5 to 10 GHz and voltage range of 0.66 to 0.87 mV.The circular UWB antenna is constructed employing jean’s substrate with a partial ground plane to improve the S-parameter,gain,bandwidth and performance characteristics.The proposed antenna with Specific Absorption Rate(SAR)value within the acceptable range can be used as a wear-able device in the human body,leveraging 5G technology.This antenna is well suited for various other applications like wireless sensors,wearable devices and short-range communication applications.

A Novel UWB Signal Sampling Method for Localization based on Compressive Sensing

Ultra-wide-band (UWB) signals are suitable for localization, since their high time resolution can provide precise time of arrival (TOA) estimation. However, one major challenge in UWB signal processing is the requirement of high sampling rate which leads to complicated signal processing and expensive hardware. In this paper, we present a novel UWB signal sampling method called UWB signal sampling via temporal sparsity (USSTS). Its sampling rate is much lower than Nyquist rate. Moreover, it is implemented in one step and no extra processing unit is needed. Simulation results show that USSTS can not recover the signal precisely, but for the use in localization, the accuracy of TOA estimation is the same as that in traditional methods. Therefore, USSTS gives a novel and effective solution for the use of UWB signals in localization.

New band-notched UWB antenna

A simple and compact ultra wideband （UWB） printed monopole antenna with band-notched performance is proposed in this paper. The antenna is partially grounded so that the Q value is depressed and the impedance bandwidth is broadened. A small strip bar is loaded on each arm of the similar U-shaped radiator. The impedance bandwidth of the antenna overlap with IEEE 802.11a is rejected consequently. The geometry parameters of the antenna are investigated and optimized with HFSS. The measured bandwidth of the proposed antenna occupies about 7.89 GHz covering from 3.05 GHz to 10.94 GHz with expected notched band from 4.96 GHz to 5.98 GHz. A quasi-omnidirectional and quasi-symmetrical radiation pattern in the whole band is also obtained. As a result, a UWB wireless communication system can be simplified with the band-notched UWB antenna presented.

Analytical Investigation of Channel Capacity of UWB-MIMO Systems

Ultra-wide-band (UWB) technology combined with multiple input and multiple output (MIMO) provides a viable solution for achieving high data transmission rates of more than 1 Gb/s in wireless communications. UWB is typically applied to short-range indoor environments and is therefore characterized by dense multipath propagation. In this type of environment, MIMO systems allow for a substantial improvement in the spectral efficiency by exploiting the inherent array gain and spatial multiplexing gain of UWB systems. This paper investigates the channel capacity of UWB-MIMO wireless technology and shows that UWB and MIMO designs improve the spectral efficiency logarithmically and linearly, respectively.

Experimental Study of On-Body Radio Channel Performance of a Compact Ultra Wideband Antenna

In this paper, on-body radio channel performance of a compact ultra wideband (UWB) antenna is investigated for body-centric wireless communications. Measurement campaigns were first done in the chamber and then repeated in an indoor environment for comparison. The path loss parameter for eight different on-body radio channels has been characterized and analyzed. In addition, the path loss was modeled as a function of distance for 34 different receiver locations for propagation along the front part of the body. Results and analysis show that, compared with anechoic chamber, a reduction of 16.34% path loss exponent is noticed in indoor environment. The antenna shows very good on-body radio channel performance and will be a suitable candidate for future efficient and reliable body-centric wireless communications.

Pulse Generation and Compression Techniques for Microwave Electronics and Ultrafast Systems

Ultrabroadband systems and ultrafast electronics require the generation,transmission,and processing of high-quality ultrashort pulses rang-ing from nanoseconds(ns)to picoseconds(ps),which include well-established and emerging applications of time-domain reflectometry,arbitrary wave-form generation,sampling oscilloscopes,frequency synthesis,through-wall radar imaging,indoor communication,radar surveillance,and medical radar detection.Impulse radar advancements in industrial,scientific,and medical(ISM)domains are,for example,driven by ns-scale-defined ultrawideband(UWB)technologies.Nevertheless,the generation of ultrashort ps-scale pulses is highly desired to achieve unprecedented performances in all these ap-plications and future systems.However,due to the variety and applicability of different pulse generation and compression techniques,the selection of optimum or appropriate pulse generators and compressors is difficult for practitioners and users.To this end,this article aims to provide a comprehen-sive overview of ultrashort ns and ps pulse generation and compression techniques.The proposed and developed pulse generators available in the litera-ture and on the market,which are characterized by their corresponding pros and cons,are also explored.The theoretical analysis of pulse generation us-ing a nonlinear transmission line(NLTL)presented in the literature is briefly explained as well.Additionally,a holistic overview of these pulse genera-tors from the perspective of applications is given to describe their utilization in practical systems.All of these techniques are well summarized and com-pared in terms of fundamental pulse parameters,and research gaps in specified areas are highlighted.A thorough discussion of previous research work on various topologies and techniques is presented,and potential future directions for technical advancement are examined.