期刊文献+
共找到176,756篇文章
< 1 2 250 >
每页显示 20 50 100
A Modified Iterative Learning Control Approach for the Active Suppression of Rotor Vibration Induced by Coupled Unbalance and Misalignment
1
作者 Yifan Bao Jianfei Yao +1 位作者 Fabrizio Scarpa Yan Li 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2024年第1期242-253,共12页
This paper proposes a modified iterative learning control(MILC)periodical feedback-feedforward algorithm to reduce the vibration of a rotor caused by coupled unbalance and parallel misalignment.The control of the vibr... This paper proposes a modified iterative learning control(MILC)periodical feedback-feedforward algorithm to reduce the vibration of a rotor caused by coupled unbalance and parallel misalignment.The control of the vibration of the rotor is provided by an active magnetic actuator(AMA).The iterative gain of the MILC algorithm here presented has a self-adjustment based on the magnitude of the vibration.Notch filters are adopted to extract the synchronous(1×Ω)and twice rotational frequency(2×Ω)components of the rotor vibration.Both the notch frequency of the filter and the size of feedforward storage used during the experiment have a real-time adaptation to the rotational speed.The method proposed in this work can provide effective suppression of the vibration of the rotor in case of sudden changes or fluctuations of the rotor speed.Simulations and experiments using the MILC algorithm proposed here are carried out and give evidence to the feasibility and robustness of the technique proposed. 展开更多
关键词 Rotor vibration suppression Modified iterative learning control unbalance Parallel misalignment Active magnetic actuator
下载PDF
The effect of Laves phases and nano-precipitates on the electrochemical corrosion resistance of Mg-Al-Ca alloys under alkaline conditions
2
作者 Markus Felten Veronika Chaineux +12 位作者 Siyuan Zhang Ali Tehranchi Tilmann Hickel Christina Scheu Joshua Spille Marta Lipińska-Chwałek Joachim Mayer Benjamin Berkels Marcus Hans Imke Greving Silja Flenner Sandra Sefa Daniela Zander 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第6期2447-2461,共15页
The electrochemical corrosion mechanisms of Mg alloys were extensively studied in previous investigations of different chemical com-positions,modified surface states and various electrolyte conditions.However,recent r... The electrochemical corrosion mechanisms of Mg alloys were extensively studied in previous investigations of different chemical com-positions,modified surface states and various electrolyte conditions.However,recent research focused on the active state of Mg dissolution,leading to unresolved effects of secondary phases adjacent to a stableα-solid solution passive layer.The present study investigates the fundamental electrochemical corrosion mechanisms of three different Laves phases with varying phase morphologies and phase fractions in the passive state of Mg-Al-Ca alloys.The microstructure was characterized by(transmission-)electron microscopy and synchrotron-based transmission X-ray microscopy.The electrochemical corrosion resistance was determined with a standard three-electrode setup and advanced in-situ flow cell measurements.A new electrochemical activity sequence(C15>C36>α-Mg>C14)was obtained,as a result of a stable passive layer formation on theα-solid solution.Furthermore,nm-scale Mg-rich precipitates were identified within the Laves phases,which tend to inhibit the corrosion kinetics. 展开更多
关键词 Laves phase STEM MAGNESIUM Corrosion Passive layer
下载PDF
The occurrence phases and enrichment mechanism of rare earth elements in cobalt-rich crusts from Marcus-Wake Seamounts
3
作者 Jingjing Gao Jihua Liu +3 位作者 Hui Zhang Shijuan Yan Xiangwen Ren Quanshu Yan 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2024年第8期58-68,共11页
To explore the occurrence phases and enrichment mechanism of rare earth elements(REEs)in cobalt-rich crusts,this study analyzes the mineral composition and REE contents of the samples from Marcus-Wake Seamounts by XRD... To explore the occurrence phases and enrichment mechanism of rare earth elements(REEs)in cobalt-rich crusts,this study analyzes the mineral composition and REE contents of the samples from Marcus-Wake Seamounts by XRD,ICP-OES and ICP-MS.The results show that,(1)the cobalt-rich crusts contain the major crystalline mineral(vernadite),the secondary minerals(quartz,plagioclase and carbonate fluorapatite),and a large amount of amorphous ferric oxyhydroxides(FeOOH).(2)The cobalt-rich crusts contains higher Mn(10.83%to 28.76%)and Fe(6.14%to 18.86%)relative to other elements,and are enriched in REEs,with total REE contents of 1563−3238μg/g and Ce contents of 790−1722μg/g.Rare earth element contents of the old crusts are higher than those of the new crusts.Moreover,the non-phosphatized crusts have positive Ce and negative Y anomalies,and yet the phosphatized crusts have positive Ce and positive Y anomalies,indicating that cobalt-rich crusts is hydrogenetic and REEs mainly come from seawater.(3)Analytical data also show that the occurrence phases of elements in cobalt-rich crusts are closely related to their mineral phases.In the non-phosphatized crusts,REEs are adsorbed by colloidal particles into the crusts(about 67%of REEs in the Fe oxide phase,and about 17%of REEs in the Mn oxide phase).In contrast,in the phosphatized crusts(affected by the phosphatization),REEs may combine with phosphate to form rare earth phosphate minerals,and about 64%of REEs are enriched in the residual phase containing carbonate fluorapatite,but correspondingly the influence of Fe and Mn oxide phases on REEs enrichment is greatly reduced.In addition,the oxidizing environment of seawater,high marine productivity,phosphatization,and slow growth rate can promote the REE enrichment.This study provides a reference for the metallogenesis of cobalt-rich crusts in the Pacific. 展开更多
关键词 cobalt-rich crusts REEs occurrence phase enrichment mechanism Marcus-Wake Seamounts
下载PDF
Stress-corrosion coupled damage localization induced by secondary phases in bio-degradable Mg alloys:phase-field modeling
4
作者 Chao Xie Shijie Bai +2 位作者 Xiao Liu Minghua Zhang Jianke Du 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第1期361-383,共23页
In this study,a phase-field scheme that rigorously obeys conservation laws and irreversible thermodynamics is developed for modeling stress-corrosion coupled damage(SCCD).The coupling constitutive relationships of the... In this study,a phase-field scheme that rigorously obeys conservation laws and irreversible thermodynamics is developed for modeling stress-corrosion coupled damage(SCCD).The coupling constitutive relationships of the deformation,phase-field damage,mass transfer,and electrostatic field are derived from the entropy inequality.The SCCD localization induced by secondary phases in Mg is numerically simulated using the implicit iterative algorithm of the self-defined finite elements.The quantitative evaluation of the SCCD of a C-ring is in good agreement with the experimental results.To capture the damage localization,a micro-galvanic corrosion domain is defined,and the buffering effect on charge migration is explored.Three cases are investigated to reveal the effect of localization on corrosion acceleration and provide guidance for the design for resistance to SCCD at the crystal scale. 展开更多
关键词 Phase field Mg alloys Stress-corrosion coupled damage Damage localization Finite element method
下载PDF
The Spatiotemporal Distribution Characteristics of Cloud Types and Phases in the Arctic Based on CloudSat and CALIPSO Cloud Classification Products
5
作者 Yue SUN Huiling YANG +5 位作者 Hui XIAO Liang FENG Wei CHENG Libo ZHOU Weixi SHU Jingzhe SUN 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2024年第2期310-324,共15页
The cloud type product 2B-CLDCLASS-LIDAR based on CloudSat and CALIPSO from June 2006 to May 2017 is used to examine the temporal and spatial distribution characteristics and interannual variability of eight cloud typ... The cloud type product 2B-CLDCLASS-LIDAR based on CloudSat and CALIPSO from June 2006 to May 2017 is used to examine the temporal and spatial distribution characteristics and interannual variability of eight cloud types(high cloud, altostratus, altocumulus, stratus, stratocumulus, cumulus, nimbostratus, and deep convection) and three phases(ice,mixed, and water) in the Arctic. Possible reasons for the observed interannual variability are also discussed. The main conclusions are as follows:(1) More water clouds occur on the Atlantic side, and more ice clouds occur over continents.(2)The average spatial and seasonal distributions of cloud types show three patterns: high clouds and most cumuliform clouds are concentrated in low-latitude locations and peak in summer;altostratus and nimbostratus are concentrated over and around continents and are less abundant in summer;stratocumulus and stratus are concentrated near the inner Arctic and peak during spring and autumn.(3) Regional averaged interannual frequencies of ice clouds and altostratus clouds significantly decrease, while those of water clouds, altocumulus, and cumulus clouds increase significantly.(4) Significant features of the linear trends of cloud frequencies are mainly located over ocean areas.(5) The monthly water cloud frequency anomalies are positively correlated with air temperature in most of the troposphere, while those for ice clouds are negatively correlated.(6) The decrease in altostratus clouds is associated with the weakening of the Arctic front due to Arctic warming, while increased water vapor transport into the Arctic and higher atmospheric instability lead to more cumulus and altocumulus clouds. 展开更多
关键词 CloudSat and CALIPSO cloud type cloud phase temporal and spatial distribution interannual variation
下载PDF
Solid-state NMR studies of proteins in condensed phases
6
作者 Jiani Xiang Xialian Wu +1 位作者 Angelo L.Chu Junxia Lu 《Magnetic Resonance Letters》 2024年第3期1-10,共10页
Some proteins perform their biological functions by changing their material states through liquid-liquid phase separation.Upon phase separation,the protein condenses into a concentrated liquid phase and sometimes into... Some proteins perform their biological functions by changing their material states through liquid-liquid phase separation.Upon phase separation,the protein condenses into a concentrated liquid phase and sometimes into a gel phase,changing its dynamic properties and intermolecular interactions,thereby regulating cellular functions.Although the biological significance of this phenomenon has been widely recognized by researchers,there is still a lack of a comprehensive understanding of the structural and dynamic properties of the protein in the condensed phase.In this phase,molecules usually contain domains with varied dynamic properties and undergo intermediate exchanges.Magic angle spinning(MAS)solid-state NMR(SSNMR)experiments are very powerful in studying rigid protein polymers such as amyloid.The incorporation of solution-like experiments into SSNMR and the development of J-coupling based MAS SSNMR techniques extend its ability to study partially mobile segments of proteins in a condensed liquid or gel phase which are not visible by solution NMR or dipolar-coupling based SSNMR.Therefore,it has been applied in studying protein condensation and has provided very important information that is hard to obtain by other techniques. 展开更多
关键词 Magic angle spinning(MAS)solid-state NMR(SSNMR) Protein condenses J-coupling based MAS SSNMR Liquid-liquid phase separation
下载PDF
Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases
7
作者 Camila Caroline de Castro AndréMartins Neves Benjamin Klusemann 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第6期2298-2311,共14页
Constrained Friction Processing(CFP)is a novel solid-state processing technique suitable for lightweight materials,such Mg-and Al-alloys.The technique enables grain size refinement to fine or even ultrafine scale.In t... Constrained Friction Processing(CFP)is a novel solid-state processing technique suitable for lightweight materials,such Mg-and Al-alloys.The technique enables grain size refinement to fine or even ultrafine scale.In this study,the effect of CFP on the microstructural refinement of AM50 rods is investigated in terms of particle size and morphology of the eutectic and secondary phases originally present in the base material,in particular the eutecticβ-Mg_(17)Al_(12)and Al-Mn phases.For that purpose,as-cast and solution heat-treated base material and processed samples were analyzed.The Al_(8)Mn_(5) intermetallic phase was identified as the main secondary phase present in all samples before and after the processing.A notorious refinement of these particles was observed,starting from particles with an average equivalent length of a few micrometers to around 560 nm after the processing.The refinement of the secondary phase refinement is attributed to a mechanism analogous to the attrition comminution,where the combination of temperature increase and shearing of the material enables the continuous breaking of the brittle intermetallic particles into smaller pieces.As for the eutectic phase,the results indicate the presence of the partially divorcedβ-Mg_(17)Al_(12)particles exclusively in the as-cast base material,indicating that no further phase transformations regarding the eutectic phase,such as dynamic precipitation,occurred after the CFP.In the case of the processed as-cast material analyzed after the CFP,the thermal energy generated during the processing led to temperature values above the solvus limit of the eutectic phase,which associated with the mechanical breakage of the particles,enabled the complete dissolution of this phase.Therefore,CFP was successfully demonstrated to promote an extensive microstructure refinement in multiple aspects,in terms of grain sizes of theα-Mg phase and presence and morphology of the Al-Mn and eutecticβ-Mg_(17)Al_(12). 展开更多
关键词 Constrained friction processing AM50 Refill friction stir spot welding Extrusion β-Mg_(17)Al_(12) Al-Mn phases
下载PDF
基于熵和置信度的非平衡问题欠采样Boosting框架
8
作者 冯本勇 徐勇军 《计算机应用与软件》 北大核心 2024年第1期269-277,284,共10页
为了解决传统方法中存在的边界过拟合、泛化性能差、重要信息丢失问题,提出一种基于熵和置信度的非平衡问题欠采样Boosting框架。将动态重采样方法与Boosting集成在一起,以解决边界过拟合问题,提高泛化性能;在Ecuboost中使用置信度和熵... 为了解决传统方法中存在的边界过拟合、泛化性能差、重要信息丢失问题,提出一种基于熵和置信度的非平衡问题欠采样Boosting框架。将动态重采样方法与Boosting集成在一起,以解决边界过拟合问题,提高泛化性能;在Ecuboost中使用置信度和熵作为基准,以保证欠采样过程中大多数样本的有效性和结构分布,提出的基于置信度的Boosting框架使动态采样方法进一步提升方法的泛化能力。用两个大型数据集上的实验对比结果验证了该方法的有效性。 展开更多
关键词 置信度 欠采样 不平衡
下载PDF
基于CTA颅内动脉瘤形态联合PHASES评分对破裂出血预测研究
9
作者 王金泉 黄吉淮 谢颖 《影像研究与医学应用》 2024年第4期31-34,共4页
目的:分析头颈部计算机断层扫描血管成像(CTA)联合PHASES评分对颅内动脉瘤(IA)破裂出血的预测价值。方法:回顾性分析2021年10月—2023年9月东莞市长安医院诊治的IA患者临床资料,根据IA破裂出血与否分为IA破裂组(n=46)和IA未破裂组(n=44)... 目的:分析头颈部计算机断层扫描血管成像(CTA)联合PHASES评分对颅内动脉瘤(IA)破裂出血的预测价值。方法:回顾性分析2021年10月—2023年9月东莞市长安医院诊治的IA患者临床资料,根据IA破裂出血与否分为IA破裂组(n=46)和IA未破裂组(n=44),收集两组临床资料,对比两组患者CTA影像瘤体特征参数和PHASES评分结果。采用受试者工作特征(ROC)曲线分析两者联合预测动脉瘤破裂的效能。结果:IA破裂组高血压、糖尿病发生率及PHASES评分均高于IA未破裂组,差异有统计学意义(P <0.05)。两组病灶位置以颈内动脉(ICA)和大脑中动脉(MCA)为主,但IA破裂组病灶位置在MCA的占比为41.30%,高于IA未破裂组的20.45%,瘤体>7 mm的最多(瘤体7~9.9 mm占65.22%),瘤体形态不规则占58.7%,未破裂组病灶位置在ICA最多(68.18%),瘤体<7 mm的居多(75.00%),瘤体形态规则囊状动脉瘤占93.18%,差异有统计学意义(P <0.05)。CTA瘤体特征参数比较,IA破裂组患者瘤颈宽度、瘤体高度、瘤体长度、动脉瘤最大直径、入射夹角、动脉瘤体颈比等参数均高于IA未破裂组,差异有统计学意义(P <0.05)。CTA瘤体特征参数+PHASES评分联合预测曲线下面积为0.916,高于CTA瘤体特征参数(0.901)和PHASES评分(0.731)。结论:CTA瘤体特征参数+PHASES评分联合预测IA患者破裂出血效能最佳。 展开更多
关键词 颅内动脉瘤 破裂出血 CTA phases评分
下载PDF
一种天基双基地InSAR系统的相位同步方法及验证情况 被引量:1
10
作者 来驰攀 刘爱芳 +1 位作者 江涛 林幼权 《现代雷达》 CSCD 北大核心 2024年第4期15-21,共7页
以德国的TanDEM-X双星编队干涉合成孔径雷达(InSAR)卫星系统为背景,提出了基于点频连续波同步信号双向对传,实现编队卫星InSAR系统相位同步的方法。文中给出了该同步方法实现的框架,对该相位同步方法的原理进行了理论推导,得出了补偿相... 以德国的TanDEM-X双星编队干涉合成孔径雷达(InSAR)卫星系统为背景,提出了基于点频连续波同步信号双向对传,实现编队卫星InSAR系统相位同步的方法。文中给出了该同步方法实现的框架,对该相位同步方法的原理进行了理论推导,得出了补偿相位差的表达式,并对影响同步精度的因素进行了初步的分析。该方法可用于天基双/多基地合成孔径雷达系统相位同步链路的设计,仿真分析的结果验证了该方法的理论可行性。此外,通过搭建实物系统对系统的工程可实现精度进行了验证,结果表明获取的载波频率相位同步精度与倍频器件的频率精度和一致性密切相关。该相位同步方法为与TanDEM-X相近InSAR系统的设计提供参考。 展开更多
关键词 编队卫星 合成孔径雷达 干涉合成孔径雷达 相位同步 双基地雷达
下载PDF
Al含量提高对IN 617合金持久性能及组织稳定性的影响
11
作者 任利国 白亚冠 +5 位作者 聂义宏 杨晓禹 王大鹏 白兴红 彭亚敏 傅万堂 《材料热处理学报》 CAS CSCD 北大核心 2024年第9期150-159,共10页
采用高温持久实验、扫描电镜(SEM)及透射电镜(TEM)等研究了Al含量提高对IN 617合金持久性能及组织稳定性的影响。结果表明:Al含量提高后,基于超过4万小时的实验数据,IN 617合金700℃、10万小时的外推持久强度超过170 MPa,持久性能显著提... 采用高温持久实验、扫描电镜(SEM)及透射电镜(TEM)等研究了Al含量提高对IN 617合金持久性能及组织稳定性的影响。结果表明:Al含量提高后,基于超过4万小时的实验数据,IN 617合金700℃、10万小时的外推持久强度超过170 MPa,持久性能显著提高,合金的持久断裂机制仍以微孔聚集长大为主;Al含量的提高会明显促进IN 617合金中γ′相的析出,提高其含量,同时也会促进合金中μ相和σ相等TCP相(Topologically close-packed phases)的析出,从而提高合金的硬度与持久性能,但尚未发现TCP相会对合金持久强度产生不利影响;时效处理时间越长,晶界析出相尺寸越大且愈加连续,致使晶界结合强度降低,而Al含量的提高又会提高晶内强度。二者共同作用,会使IN 617合金的持久塑性降低。 展开更多
关键词 in 617合金 AL含量 持久性能 组织稳定性 析出相
下载PDF
Variable precipitation behaviors of Laves phases in an ultralight Mg-Li-Zn alloy 被引量:2
12
作者 Weixin Lou Hongbo Xie +7 位作者 Xiaobo Zhao Junyuan Bai Hehang Zhang Yi Wang Xinze Li Hucheng Pan Yuping Ren Gaowu Qin 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2023年第6期2018-2026,共9页
Precipitation habits plays a decisive role in strengthening materials,especially for Mg alloys the non-basal plane precipitation is necessary but very limited.Generally,the precipitates would nucleate and grow up in a... Precipitation habits plays a decisive role in strengthening materials,especially for Mg alloys the non-basal plane precipitation is necessary but very limited.Generally,the precipitates would nucleate and grow up in a specific habit plane owing to the constraint of free-energy minimization of the system.Herein,in an aged ultralight Mg-Li-Zn alloy,we confirmed that the precipitates dominated by C15 Laves structure could form in a variety of habit planes,to generate three forms of strengthening-phases,i.e.,precipitate-rod,precipitate-lath,and precipitate-plate.Among which,the precipitate-plates are on basal plane as usually but precipitate-rods/laths are on non-basal plane,and such non-basal precipitates would transform into the basal(Mg,Li)Zn_(2)Laves structure with prolonged aging.These findings are interesting to understand the precipitation behaviors of multi-domain Laves structures in hexagonal close-packed crystals,and expected to provide a guidance for designing ultralight high-strength Mg-Li based alloys via precipitation hardening on the non-basal planes. 展开更多
关键词 Laves phase PRECIPITATION Habit plane ORIENTATION Magnesium alloys
下载PDF
MCJ-UNet:一种双/多通道联合InSAR相位解缠网络
13
作者 丁泽刚 孙涛 +6 位作者 王震 赵健 史一鹏 陈浩龙 陈之洲 王岩 曾涛 《雷达学报(中英文)》 EI CSCD 北大核心 2024年第1期97-115,共19页
干涉合成孔径雷达(InSAR)可实现地表高程的高效获取,在地形测绘中应用广泛。双/多通道InSAR技术可借助不同通道(基线、频点)的高程模糊度差异,解决相位欠采样问题,完成高程陡变区域的干涉相位解缠,实现InSAR技术在测绘困难区域的有效应... 干涉合成孔径雷达(InSAR)可实现地表高程的高效获取,在地形测绘中应用广泛。双/多通道InSAR技术可借助不同通道(基线、频点)的高程模糊度差异,解决相位欠采样问题,完成高程陡变区域的干涉相位解缠,实现InSAR技术在测绘困难区域的有效应用。该文即面向高效高精度相位解缠需求,利用深度学习这一有力工具,结合不同通道的相位特征及相互约束关系,提出了一种双/多通道联合干涉相位解缠网络:Multi-Channel-Joint-UNet(MCJ-UNet)。该网络的构建以双通道(双频、双基线)InSAR为基本观测构型,并可实现向多通道构型的扩展,其构建的核心思路主要包括3点:首先,将干涉相位解缠中的模糊数估计问题转化为语义分割问题,并采用UNet网络完成分割处理;其次,引入挤压激励模块(SE)动态调整信息权重,以增强网络不同通道对其所需信息的感知能力;最后,利用多通道联合约束下的相位残差优化损失函数,实现网络调谐。此外,为避免语义分割结果的边缘细节误差对解缠效果的影响,该文还提出了一种基于多通道联合约束的解缠误差自修正方法,以保证解缠质量。模拟地形仿真数据、真实地形仿真数据以及TerraSAR-X实测数据验证了所提方法的有效性。 展开更多
关键词 干涉合成孔径雷达(inSAR) 多通道 相位解缠 深度学习 UNet网络
下载PDF
低抖动电荷泵锁相环设计及其Simulink建模仿真
14
作者 蔡俊 王勇 《宜春学院学报》 2024年第6期28-34,共7页
随着集成电路工艺技术的进步,电路工作频率越来越高,对时钟信号的抖动和相噪也提出了更高的要求。针对锁相环电路参数多、结构复杂、瞬态仿真耗时长等问题,通过建立电荷泵锁相环系统环路数学模型,并运用MATLAB/Simulink对其进行负反馈... 随着集成电路工艺技术的进步,电路工作频率越来越高,对时钟信号的抖动和相噪也提出了更高的要求。针对锁相环电路参数多、结构复杂、瞬态仿真耗时长等问题,通过建立电荷泵锁相环系统环路数学模型,并运用MATLAB/Simulink对其进行负反馈系统建模,实现对电荷泵锁相环的快速动态仿真。在TSMC 65 nm CMOS工艺节点下,完成了锁相环的电路设计、版图绘制、物理验证并提取寄生参数及后仿真,得到一款典型值:输入频率为30 MHz,锁定频率1.5 GHz的低抖动电荷泵锁相环。后仿真结果表明该PLL电路性能指标良好,在典型值条件下,PLL的锁定时间为10μs,锁定时峰峰值抖动为2.68 ps,时钟信号占空比为45%。 展开更多
关键词 锁相环 鉴相鉴频器 电荷泵 压控振荡器
下载PDF
Cine PC-MRI技术在Arnold-Chiari畸形手术疗效评估中的应用
15
作者 韩向前 王文学 +7 位作者 王远成 李长城 李春阳 王建伟 苗重昌 孙毅 徐开喜 张名忠 《中国CT和MRI杂志》 2024年第9期26-28,共3页
目的探讨相位对比电影-磁共振成像(Cine PC-MRI)技术在小脑扁桃体下疝(Arnold-Chiari)畸形手术疗效评估中的应用。方法选取2018年8月—2022年9月期间多中心收集的65例行Arnold-Chiari畸形手术治疗的患者作为研究对象。术后均随访6个月... 目的探讨相位对比电影-磁共振成像(Cine PC-MRI)技术在小脑扁桃体下疝(Arnold-Chiari)畸形手术疗效评估中的应用。方法选取2018年8月—2022年9月期间多中心收集的65例行Arnold-Chiari畸形手术治疗的患者作为研究对象。术后均随访6个月。比较患者术前、术后6个月的预后、生活质量、寰齿间距(ADI)值、脊髓空洞直径、后颅窝斜坡长度、枕骨大孔横径、后颅窝高径长度及脑脊液流速,随访期间的并发症情况。结果术后6个月,患者芝加哥Chiari结果量表(CCOS)评分及健康相关生活质量评分(HRQoL)高于术前(P<0.05);随访期间,有3例进行枕大池重建术的患者伤口发生脑脊液漏,给予腰大池引流,7d后伤口愈合良好。术后6个月,患者寰齿间距(ADI)值及脊髓空洞直径低于术前;后颅窝斜坡长度及后颅窝高径长度长于术前;桥脑延髓池层面、中脑导水管层面及颈椎间盘层面的每搏输出量(SV)、平均流量(MF)均高于术前;头向峰值流速(Vumax)、足向峰值流速(Vdmax)均低于术前(P<0.05)。结论Arnold-Chiari畸形患者经外科手术治疗可有效改善预后并提高生活质量,但行枕大池重建术时要注意防范脑脊液漏的发生,而Cine PC-MRI技术可为Arnold-Chiari畸形患者手术治疗疗效评估提供有效依据。 展开更多
关键词 小脑扁桃体下疝畸形 相位对比电影-磁共振成像 手术
下载PDF
相变对TiNi合金薄壁管中波速的影响
16
作者 崔世堂 赵红宇 +1 位作者 董方栋 张永亮 《爆炸与冲击》 EI CAS CSCD 北大核心 2024年第9期89-97,共9页
形状记忆合金在受到强冲击荷载作用时会发生相变,而相变对其结构件的动态力学响应影响显著。本文采用同时考虑静水压力和偏应力影响的相变临界准则,推导了增量型的相变本构模型。基于广义特征理论,得到了复杂应力状态下特征波速的解析... 形状记忆合金在受到强冲击荷载作用时会发生相变,而相变对其结构件的动态力学响应影响显著。本文采用同时考虑静水压力和偏应力影响的相变临界准则,推导了增量型的相变本构模型。基于广义特征理论,得到了复杂应力状态下特征波速的解析表达式。特征波速不仅和材料本身的力学参数(如拉压不对称性和混合相的模量)有关,还和材料所处的应力状态有关。对因相变导致体积膨胀的TiNi合金而言,拉压不对称性系数的增大会提高慢波的波速,而对快波几乎没有影响。在相变椭圆的短轴处(α=90°),慢波的波速最低,并随混合相无量纲模量的增大而显著减低,混合相无量纲模量由2增加至5时,波速降低幅度为36.2%,而快波的波速达到最大值c_(0),和混合相的模量无关;在相变椭圆的长轴处(α=180°),慢波的速度达到最大值,而快波的波速达到最小值c_(2)。 展开更多
关键词 相变 复合应力波 薄壁管 TinI合金 伪弹性
下载PDF
K_(0.5)Na_(0.5)NbO_(3)-x LiNbO_(3)陶瓷的相转变与压电性能温度稳定性研究
17
作者 肖荣振 徐鹏 燕小斌 《压电与声光》 CAS 北大核心 2024年第5期710-715,共6页
采用常规陶瓷工艺制备了K_(0.5)Na_(0.5)NbO_(3)-x LiNbO_(3)(KNN-x LN)基无铅压电陶瓷。采用介电温度谱结合XRD系统研究了铌酸锂(LN)掺杂对KNN陶瓷相结构与压电性能温度稳定性的影响规律与机制。结果表明,LN在KNN陶瓷中的固溶度范围内... 采用常规陶瓷工艺制备了K_(0.5)Na_(0.5)NbO_(3)-x LiNbO_(3)(KNN-x LN)基无铅压电陶瓷。采用介电温度谱结合XRD系统研究了铌酸锂(LN)掺杂对KNN陶瓷相结构与压电性能温度稳定性的影响规律与机制。结果表明,LN在KNN陶瓷中的固溶度范围内(约小于10%(摩尔分数)),LN掺杂具有同时提升KNN陶瓷的T_(C)与降低陶瓷T_(O-T)的效应。当LN的掺杂量(摩尔分数)为6%时,可使陶瓷的T_(O-T)下移至室温,此时陶瓷为正交相与四方相两相共存,陶瓷的压电性能得到极大增强。T_(C)的提升增强了陶瓷的压电性能温度稳定性,当LN的掺杂量(摩尔分数)x~8%,T_(C)增加至479℃,此组分陶瓷的压电性能经470℃热处理后仍保持在室温时的71%,表现出良好的温度稳定性。当LN超过固溶度后,部分LN倾向于与K元素生成第二相,未反应的LN因其强热释电效应导致陶瓷的d 33呈现出随热处理温度升高而增强的伪增强趋势。 展开更多
关键词 铌酸钾钠 铌酸锂 相结构 居里温度 压电性能温度稳定性
下载PDF
融合DT和SDFPT的时序InSAR矿区形变监测与分析
18
作者 于冰 王冰 +3 位作者 刘国祥 张过 胡云亮 胡金龙 《自然资源遥感》 CSCD 北大核心 2024年第1期14-25,共12页
煤矿高强度开采会导致严重的地面形变及次生地质灾害。时序合成孔径雷达干涉(synthetic aperture Radar interferometry,InSAR)具有较强的形变监测能力,但在开采核心及周边低相干区域时无法监测到足够的目标点。该文尝试将分布式目标(di... 煤矿高强度开采会导致严重的地面形变及次生地质灾害。时序合成孔径雷达干涉(synthetic aperture Radar interferometry,InSAR)具有较强的形变监测能力,但在开采核心及周边低相干区域时无法监测到足够的目标点。该文尝试将分布式目标(distributed target,DT)和缓慢去相关滤波相位目标(slowly-decorrelating filtered phase target,SDFPT)进行联合,以提高矿区形变监测点的密度和覆盖度。分别采用快速同质点选取(fast statistically homogenous pixel selection,FaSHPS)法和振幅离差指数法选取DT和SDFPT候选点,分别对2类点进行相位优化和稳定性分析,筛选出符合条件的DT和SDFPT形成融合点集,并对其进行三维相位解缠、恢复相位时间序列和时空滤波,最终得到融合点集的形变时间序列和年均形变速率。选取2018年4月—2020年4月获取的覆盖布尔台煤矿的60景Sentinel-1影像进行形变监测,结果表明,融合DT和SDFPT后形变点密度和覆盖度显著提升,可监测最大形变量级也随之增加。实验区域内存在5处形变漏斗,最大累积形变量达到-309.76 mm;形变影响范围和不同年份时序形变量的差异与矿区开采活动密切相关。 展开更多
关键词 布尔台煤矿 分布式目标 缓慢去相关滤波相位目标 地表形变 Sentinel-1A
下载PDF
Recent applications and chiral separation development based on stationary phases in open tubular capillary electrochromatography(2019–2022) 被引量:1
19
作者 Xinyu Li Qianjie Ma +2 位作者 Xiangtai Zheng Qin Chen Xiaodong Sun 《Journal of Pharmaceutical Analysis》 SCIE CAS CSCD 2023年第4期323-339,共17页
Capillary electrochromatography(CEC)plays a significant role in chiral separation via the double separation principle,partition coefficient difference between the two phases,and electroosmotic flow-driven separation.G... Capillary electrochromatography(CEC)plays a significant role in chiral separation via the double separation principle,partition coefficient difference between the two phases,and electroosmotic flow-driven separation.Given the distinct properties of the inner wall stationary phase(SP),the separation ability of each SP differs from one another.Particularly,it provides large room for promising applications of open tubular capillary electrochromatography(OT-CEC).We divided the OT-CEC SPs developed over the past four years into six types:ionic liquids,nanoparticle materials,microporous materials,biomaterials,non-nanopolymers,and others,to mainly introduce their characteristics in chiral drug separation.There also added a few classic SPs that occurred within ten years as supplements to enrich the features of each SP.Additionally,we discuss their applications in metabolomics,food,cosmetics,environment,and biology as analytes in addition to chiral drugs.OT-CEC plays an increasingly significant role in chiral separation and may promote the development of capillary electrophoresis(CE)combined with other instruments in recent years,such as CE with mass spectrometry(CE/MS)and CE with ultraviolet light detector(CE/UV). 展开更多
关键词 Capillary electrochromatography Open tubular capillary Chiral separation Stationary phase Capillary electrophoresis with mass spectrometry(CE/MS)
下载PDF
基于Sentinel-1时序数据的山地冰川表面消融变化研究--以老虎沟12号冰川为例
20
作者 张彦丽 陈刚 +3 位作者 马亚龙 胡嘉正 马宇鹏 张丽萍 《生态学报》 CAS CSCD 北大核心 2024年第4期1389-1403,共15页
冰川是影响气候变化的主要因素,合成孔径雷达(SAR)不仅具有较高空间分辨率和多极化等特点,而且对冰雪融化引起的介电常数变化较为敏感,已成为山地冰川表面消融变化监测的重要数据源。基于Sentinel-1时序数据,提出了一种综合应用多时相... 冰川是影响气候变化的主要因素,合成孔径雷达(SAR)不仅具有较高空间分辨率和多极化等特点,而且对冰雪融化引起的介电常数变化较为敏感,已成为山地冰川表面消融变化监测的重要数据源。基于Sentinel-1时序数据,提出了一种综合应用多时相多极化SAR变化检测算法和Sigmoid函数的冰川表面消融监测方法。以祁连山老虎沟12号冰川为研究区,利用“中心线-圆”方法获得的冰川东、西支64个样区,通过各点2019-2020年124个时相的SAR后向散射系数变化特征确定了7个典型样区及2019和2020年冰川消融期;基于同轨道参考影像与多时相融雪影像对比,分别获得变化监测影像VV和VH极化后向散射系数,对其进行权重组合后提取湿雪像元;通过Sigmoid函数并结合湿雪平均海拔高度提取干雪,从而得到2年冰川消融期内16个时相的冰川表面干湿雪分布。利用2019年09月01日无人机数字正射影像(DOM)以及与Sentinel-1邻近日期5景Sentinel-2影像对提取结果进行精度验证,并结合冰川上气象站点气温和降水数据对误差结果进行深入分析。实验结果表明,该方法能够有效提取冰川表面干、湿雪分布,总体分类精度OA高达96%,Kappa系数高达0.84。老虎沟12号冰川消融期及覆盖各类型消融变化规律存在年际变化:2019年冰川的消融期为5月初至9月中下旬,2020年的消融期为6月中下旬至9月初;2019年从消融季开始,冰川表面干雪面积迅速减小,而湿雪与冰川冰面积在整个消融期均较大,但随着强降雪出现,干雪面积骤然上升,2020年冰川冰和湿雪面积变化明显,冰川冰面积持续增加,湿雪面积持续减小,而干雪面积在高海拔区趋于稳定。 展开更多
关键词 多极化SAR 后向散射系数 多时相多极化变化检测 冰川消融期
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部