Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey corr...Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey correlation analysis. The results show that: 1) the grain yield per unit area has been taking on an increasing trend in the recent 20 years. It increased from 2519.80kg/ha in 1980 to 4216.11kg/ha in 2003, with an increasing rate of 67.32%; 2) the variation of grain yield per unit area is considerably prominent and its range is also very great, with the maximal increase rate of 42.59% and maximal decrease rate of 21.13%, respectively, which are far above the whole Chinese average level; 3) the variation of main crops' yield per unit area is remarkable, which takes on the character that the yield of corn is much higher than that of soybean and rice; and 4) the grey correlation analysis shows that the most important factors impacting the variation of grain yield per unit area are the total power of agricultural machinery, the consumption of chemical fertilizer and effective irrigated area. However, the influence of natural disaster and income level should not be ignored. Effective ways to improve grain yield per unit area are to construct farmland improvement groundwork, reclaim the middle- and low-yield farmland, etc.展开更多
In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate ...In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.展开更多
The integrated circuit (IC) manufacturing process is capital intensive and complex. The production process of unit product (or die, as it is commonly referred to) takes several weeks. Semiconductor factories (fabs) co...The integrated circuit (IC) manufacturing process is capital intensive and complex. The production process of unit product (or die, as it is commonly referred to) takes several weeks. Semiconductor factories (fabs) continuously attempt to improve their productivity, as measured in output and cycle time (or mean flow time). The conflicting objective of producing maximum units at minimal production cycle time and at the highest quality, as measured by die yield, is discussed in this paper. The inter-related effects are characterized, and a model is proposed to address this multi-objective function. We then show that, with this model, die cost can be optimized for any given operating conditions of a fab. A numerical example is provided to illustrate the practicality of the model and the proposed optimization method.展开更多
Based on the combination test of various distances between ridges or plants, the influences of corresponding cultivation techniques on the per unit area yield of a variety of sweet potatoes Xushu 22 in Xianning City w...Based on the combination test of various distances between ridges or plants, the influences of corresponding cultivation techniques on the per unit area yield of a variety of sweet potatoes Xushu 22 in Xianning City were analyzed. The results show that different distances between ridges or plants had significant effects on the per unit area yield of Xushu 22; when the distances between ridges and plants for Xushu 22 planted in the city were 80 and 21 cm respectively, the per u- nit area yield of Xushu 22 was the highest, up to 48 340.7 kg/hm2.展开更多
基金Under the auspices of the National Natural Science Foundation of China (No. 40601027)
文摘Based on the surveys and the statistic data during 1980-2003, the variation character of grain yield per unit area in Northeast China and its main factors have been discussed by the methods of statistics and grey correlation analysis. The results show that: 1) the grain yield per unit area has been taking on an increasing trend in the recent 20 years. It increased from 2519.80kg/ha in 1980 to 4216.11kg/ha in 2003, with an increasing rate of 67.32%; 2) the variation of grain yield per unit area is considerably prominent and its range is also very great, with the maximal increase rate of 42.59% and maximal decrease rate of 21.13%, respectively, which are far above the whole Chinese average level; 3) the variation of main crops' yield per unit area is remarkable, which takes on the character that the yield of corn is much higher than that of soybean and rice; and 4) the grey correlation analysis shows that the most important factors impacting the variation of grain yield per unit area are the total power of agricultural machinery, the consumption of chemical fertilizer and effective irrigated area. However, the influence of natural disaster and income level should not be ignored. Effective ways to improve grain yield per unit area are to construct farmland improvement groundwork, reclaim the middle- and low-yield farmland, etc.
基金This research was supported by the National Natural Sci—ence Foundation of China(Grant No.50474015)
文摘In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.
文摘The integrated circuit (IC) manufacturing process is capital intensive and complex. The production process of unit product (or die, as it is commonly referred to) takes several weeks. Semiconductor factories (fabs) continuously attempt to improve their productivity, as measured in output and cycle time (or mean flow time). The conflicting objective of producing maximum units at minimal production cycle time and at the highest quality, as measured by die yield, is discussed in this paper. The inter-related effects are characterized, and a model is proposed to address this multi-objective function. We then show that, with this model, die cost can be optimized for any given operating conditions of a fab. A numerical example is provided to illustrate the practicality of the model and the proposed optimization method.
基金Supported by National Technical System of Sweet Potato Industry of China~~
文摘Based on the combination test of various distances between ridges or plants, the influences of corresponding cultivation techniques on the per unit area yield of a variety of sweet potatoes Xushu 22 in Xianning City were analyzed. The results show that different distances between ridges or plants had significant effects on the per unit area yield of Xushu 22; when the distances between ridges and plants for Xushu 22 planted in the city were 80 and 21 cm respectively, the per u- nit area yield of Xushu 22 was the highest, up to 48 340.7 kg/hm2.
