Electromagnetic Performance Analysis of Variable Flux Memory Machines with Series-magnetic-circuit and Different Rotor Topologies

In this paper,the electromagnetic performance of variable flux memory(VFM)machines with series-magnetic-circuit is investigated and compared for different rotor topologies.Based on a V-type VFM machine,five topologies with different interior permanent magnet(IPM)arrangements are evolved and optimized under same constrains.Based on two-dimensional(2-D)finite element(FE)method,their electromagnetic performance at magnetization and demagnetization states is evaluated.It reveals that the iron bridge and rotor lamination region between constant PM(CPM)and variable PM(VPM)play an important role in torque density and flux regulation(FR)capabilities.Besides,the global efficiency can be improved in VFM machines by adjusting magnetization state(MS)under different operating conditions.

Mechanism of hybrid-magnetic-circuit multi-couple motor

Discusses the interval between laminations in a permanent magnet inductor motor which makes the air gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of a motor. Proposes a hybrid magnetic circuit multi couple motor to compensate for the uneven air gap magnetic field, thereby improving the performance of a motor.

Imaging changes in neural circuits in patients with depression using 1 H-magnetic resonance spectroscopy and diffusion tensor imaging

1 H-magnetic resonance spectroscopy imaging and diffusion tensor imaging were performed in 19 patients with mild depression and in 13 controls.The mean age of the patients was 31 years.The mean Hamilton depression score of the patients was 22.5±13.2.N-acetylaspartate,choline and creatine concentrations and the average diffusion coefficient and fractional anisotropy values were measured in the bilateral hippocampus,striatum,thalamus and prefrontal deep white matter. Compared with the control group,the mild depressed patients had：（1）a higher choline/creatine ratio and a negative correlation between the choline/creatine ratio and the average diffusion coefficient in the hippocampus;（2）a lower choline/creatine ratio and a higher fractional anisotropy in the striatum;（3）a lower fractional anisotropy and a positive correlation between the fractional anisotropy and the choline/creatine ratio in the prefrontal deep white matter;and（4）a higher average diffusion coefficient and a positive correlation between the choline/creatine ratio and the N-acetylaspartate/creatine ratio in the thalamus,as well as positive correlation between the choline/creatine ratio and Hamilton depression scores.These data suggest evidence of abnormal connectivity in neurofibrotic microstructures and abnormal metabolic alterations in the limbic-cortical-striatal-pallidal-thalamic neural circuit in patients with mild depression.

Influence of the axial magnetic field on sheath development after current zero in a vacuum circuit breaker

After current zero,which is the moment when the vacuum circuit breaker interrupts a vacuum arc,sheath development is the first process in the dielectric recovery process.An axial magnetic field（AMF） is widely used in the vacuum circuit breaker when the high-current vacuum arc is interrupted.Therefore,it is very important to study the influence of different AMF amplitudes on the sheath development.The objective of this paper is to study the influence of different AMF amplitudes on the sheath development from a micro perspective.Thus,the particle in cell-Monte Carlo collisions（PIC-MCC） method was adopted to develop the sheath development model.We compared the simulation results with the experimental results and then validated the simulation.We also obtained the speed of the sheath development and the energy density of the ions under different AMF amplitudes.The results showed mat the larger the AMF amplitudes are,the faster the sheath develops and the lower the ion energy density is,meaning the breakdown is correspondingly more difficult.

Analysis of electromagnetic characteristics of typical faults in permanent magnet wind generators

Due to the harsh actual operating environment of the permanent magnet wind turbine,it is easy to break down and difficult to monitor.Therefore,the electromagnetic characteristics identification of major fault types of large-scale permanent magnet wind turbines is studied in this paper.The typical faults of rotor eccentricity,stator winding short circuit and permanent magnet demagnetization of permanent magnet wind turbines are analyzed theoretically.The wavelet analysis algorithm is used to decompose and reconstruct the abnormal electromagnetic signal waveform band,and the characteristic frequency of the electromagnetic signal is obtained when the fault occurs.In order to verify the effectiveness of the proposed method,a 3.680MW permanent magnet wind turbine was taken as the research object.Its physical simulation model was established,and an external circuit was built to carry out field co-simulation.The results show that the motor fault type can be determined by detecting the change rule of fault characteristic frequency in the spectrum diagram,and the electromagnetic characteristic analysis can be applied to the early monitoring of the permanent magnet wind turbine fault.

Performance Analysis of Composite Magnetic Circuit Permanent Magnet Wind Generator

In order to reduce the starting wind speed of the wind wheel and improve the efficiency of the wind wheel, this paper proposes a new type of composite magnetic circuit permanent magnet generator, which changes the relationship between the magnetic induction intensity and the air gap by changing the structure of the main magnetic circuit. The structure greatly improves the air gap sensitivity of the generator, which makes the structural design of the permanent magnet generator easier to implement. Finally, the effectiveness and feasibility of the method are verified by simulation.

Coupler Loss Analysis of Magnetically Coupled Resonant Wireless Power Transfer System

The demand for electric vehicles has increased over the past few years.Wireless power transfer for electric vehicles provides more flexibility than traditional plug-in charging technology.Charging couplers are critical components in wireless power transfer systems.The thermal effect produced by the magnetic coupler in work will cause the temperature of the device to rise rapidly,affecting the work efficiency,transfer power,operation reliability,and service life.This paper modeled and analyzed each component's temperature distribution characteristics and thermal behavior.Firstly,the magnetic coupler's mutual inductance and magnetic circuit model are established,and the thermal model of the magnetic coupler analyzes the heat generation process.The thermal models of the coupler under three different magnetic core distributions are established,and the temperature rise of each component is obtained.The temperature rise of different parts of the coupler is verified by the temperature rise test structure of the experiment.

Guiding magnetic liquid metal for flexible circuit

Liquid metal(LM) has potential applications in flexible electronics due to its high electrical conductivity and high flexibility. However, common methods of printing LM circuits on soft substrates lack controllability, precision, and the ability to repair a damaged circuit. In this paper, we propose a method that uses a magnetic field to guide a magnetic LM(MLM) droplet to print and repair a flexible LM circuit on a femtosecond(fs) laser-patterned silicone surface.After mixing magnetic iron(Fe) particles into LM, the movement of the resultant MLM droplet could be controlled by a magnetic field. A patterned structure composed of the untreated flat domain and the LM-repellent rough microstructure produced by fs laser ablation was prepared on the silicone substrate. As an MLM droplet was guided onto the designed pattern, a soft LM circuit with smooth, uniform, and high-precision LM lines was obtained. Interestingly, the MLM droplet could also be guided to repair the circuit broken LM lines, and the repaired circuit maintained its original electrical properties. A flexible tensile sensor was prepared based on the printed LM circuit, which detected the bending degree of a finger.

Optimising repetitive transcranial magnetic stimulation for neural circuit repair following traumatic brain injury

While it is well-known that neuronal activity promotes plasticity and connectivity, the success of activity-based neural rehabilitation programs remains extremely limited in human clinical experience because they cannot adequately control neuronal excitability and activity within the injured brain in order to induce repair. However, it is possible to non-invasively modulate brain plasticity using brain stimu- lation techniques such as repetitive transcranial （rTMS） and transcranial direct current stimulation （tDCS） techniques, which show promise for repairing injured neural circuits （Henrich-Noack et al., 2013; Lefaucher et al., 2014）. Yet we are far from having full control of these techniques to repair the brain following neurotrauma and need more fundamen- tal research （Ellaway et al., 2014; Lefaucher et al., 2014）. In this perspective we discuss the mechanisms by which rTMS may facilitate neurorehabilitation and propose experimental techniques with which magnetic stimulation may be investi- gated in order to optimise its treatment potential.

Switching from positive to negative absorption with electromagnetically induced transparency in circuit quantum electrodynamics

We present a theoretical study of electromagnetically induced transparency （EIT） in a superconducting quantum circuit with a tunable V-shaped energy spectrum derived from two superconducting Josephson charge qubits coupled with each other through a superconducting quantum interference device. Using the density matrix formalism and the steady-state approximation, we obtain the analytical expressions of the first-order matrix element associated with the absorption and dispersion of the probe field for two different V-type schemes. Our results show that, for this superconducting quantum system, it is possible to realize a remarkable phenomenon that dynamic conversion between EIT and EIT with amplification without population inversion. Such a unique optical feature has potential applications in quantum optical devices and quantum information processing.

Experimental Measurement of Minority Carriers Effective Lifetime in Silicon Solar Cell Using Open Circuit Voltage Decay under Magnetic Field in Transient Mode

This manuscript presents a simple method for excess minority carriers’ lifetime measurement within the base region of p-n junction polycrystalline solar cell in transient mode. This work is an experimental transient 3-Dimensionnal study. The magnitude of the magnetic field B is varied from 0 mT to 0.045 mT. Indeed, the solar cell is illuminated by a stroboscopic flash with air mass 1.5 and under magnetic field in transient state. The experimental details are assumed in a figure. The procedure is outlined by the Open Circuit Voltage Decay analysis. Effective minority carrier life-time is calculated by fitting the linear zone of the transient voltage decay curve because linear decay is an ideal decay. The kaleidagraph software permits access to the slope of the curve which is inversely proportional to the lifetime. The external magnetic effects on minority carriers’ effective lifetime is then presented and analyzed. The analysis shows that the charge carrier’s effective lifetime decrease with the magnetic field increase.

Improving the Efficiency of Induction Heating in the Air Gap of the Magnetic Circuit

Improving the efficiency of induction heating of parts in the air gap of the magnetic circuit is associated with the use of surface and edge effects.Through modeling in ANSYS Electromagnetics Suite 19.2 and experimental studies identified patterns of edge effect in the heated parts.To ensure the uniformity of induction heating of small parts and reduce the soldering time,the electrical switch of soldered parts is used,which with the help of device controller forms a secondary circuit with low electrical resistance and high density of eddy currents.

Calculating magnetic shielding effectiveness for high-power dc comparator by magnetic circuit method

Magnetic shielding is very important in the design of a high-power dc comparator. This paper addressed the application of magnetic circuit method to calculate the magnetic shielding effectiveness of high-power dc comparators when an external radial magnetic field is added. The mathematical relationship between the magnetic shielding effectiveness and the parameters of the magnetic shielding body were obtained. To verify the validity of the calculation method, we developped a procedure to measure the magnetic shielding effectiveness of the magnetic body by measuring the induction voltage of the detection winding instead of the magnetic intensity at a point in the magnetic shielding body, making the manipulation much easier. The result calculated with the magnetic circuit method turns out to be closer to the measured one compared with that calculated with a conventional algorithm proposed by Ren, suggesting that the magnetic circuit method is an applicable tool for estimating the toroidal cavity magnetic shielding effectiveness of a heavy current comparator when a radial magnetic field is added.

Surface Breakdown of Printed Circuit Board under Magnetic Field with Reduced Pressure

Epoxy resin laminate onto which a pair of copper foil was printed was employed as test samples.The samples were placed in an artificial atmospheric chamber, which was vacuumed by a rotary pump from 100 kPa to 5 kPa.The magnetic field was produced by permanent magnets that were assembled to make E×B drift away from, into and parallel to the sample surface, respectively.Magnetic flux density was adjusted at 120 mT, 180 mT and 240 mT respectively.By applying a negative bias voltage between the electrodes, the time to surface breakdown was recorded.Obtained results show that when E×B is into the surface, the time to the breakdown is shortened;when E×B is away from the surface, the time to the breakdown is delayed;when E×B is parallel to the surface, the time to the breakdown remains approximately the same as the case without magnetic field.With the decrease of pressure, the time to the breakdown increases and the effect of magnetic field on breakdown appears to be strengthened.

Modeling and Analysis of Novel Integrated Radial Hybrid Magnetic Bearing for Magnetic Bearing Reaction Wheel

Conventional ball bearing reaction wheel used to control the attitude of spacecraft can＇t absorb the centrifugal force caused by imbalance of the wheel rotor,and there will be a torque spike at zero speed,which seriously influences the accuracy and stability of spacecraft attitude control.Compared with traditional ball-bearing wheel,noncontact and no lubrication are the remarkable features of the magnetic bearing reaction wheel,and which can solve the high precision problems of wheel.In general,two radial magnetic bearings are needed in magnetic bearing wheel,and the design results in a relatively large axial dimension and smaller momentum-to-mass ratios.In this paper,a new type of magnetic bearing reaction wheel（MBRW） is introduced for satellite attitude control,and a novel integrated radial hybrid magnetic bearing（RHMB） with permanent magnet bias is designed to reduce the mass and minimize the size of the MBRW,etc.The equivalent magnetic circuit model for the RHMB is presented and a solution is found.The stiffness model is also presented,including current stiffness,position negative stiffness,as well as tilting current stiffness,tilting angular position negative stiffness,force and moment equilibrium equations.The design parameters of the RHMB are given according to the requirement of the MBRW with angular momentum of 30 N ？ m ？ s when the rotation speed of rotor reaches to 5 kr/min.The nonlinearity of the RHMB is shown by using the characteristic curves of force-control current-position,current stiffness,position stiffness,moment-control current-angular displacement,tilting current stiffness and tilting angular position stiffness considering all the rotor position within the clearance space and the control current.The proposed research ensures the performance of the radial magnetic bearing with permanent magnet bias,and provides theory basis for design of the magnetic bearing wheel.

Study on Magnetic Shielding for Performance Improvement of Axial-Field Dual-Rotor Segmented Switched Reluctance Machine

A category of permanent-magnet-shield(PM-shield)axial-field dual-rotor segmented switched reluctance machines(ADS-SRMs)are presented in this paper.These topologies are featured by using the magnetic material to shield the flux leakage in the stator and rotor parts.Besides,the deployed magnets weaken the magnetic saturation in the iron core,thus increasing the main flux.Hence,the torque-production capability can be increased effectively.All the PM-shield topologies are proposed and designed based on the magnetic equivalent circuit(MEC)model of ADS-SRM,which is the original design deploying no magnet.The features of all the PM-shield topologies are compared with the original design in terms of the magnetic field distributions,flux linkages,phase inductances,torque components,and followed by their motion-coupled analyses on the torque-production capabilities,copper losses,and efficiencies.Considering the cost reduction and the stable ferrite-magnet supply,an alternative proposal using the ferrite magnets is applied to the magnetic shielding.The magnet demagnetization analysis incorporated with the thermal behavior is performed for further verification of the motor performance.

PERFORMANCE OF A KIND OF PERMANENT MAGNETICSUCKERSUSED IN WALL- CLIMBING ROBOTS

The magnetic circuit of a kind of permanent magnetic sucker attached to the tracks of a wall climbing robot was researched. The formula of the attractive force of sucker to a wall was derived and the relationship between the force and the air gaps was analyzed. Furthermore the effect of the parameters of the magnetic sucker on the sucker’s performance was discussed. The experiments show that proper selections of the sucker’s structural parameters can provide sufficient attractive force so as to make the wall climbing robot move safely on the steel wall surface.

KEY TECHNOLOGY FOR PRACTICAL 1-mm-DIAMETER ELECTROMAGNETIC MICROMOTOR

A 1 mm diameter electromagnetic micromotor was developed as a crux component for MEMS application. The motor has a novel layer structure with a 1 mm diameter rotor in the middle of two stators with the same size. The stator uses multiple layers, slotless and concentrated planar winding. The rotor adopts multipolar permanent magnet with high performance. Ruby bearing is used to prolong operating lifetime of the micromotor. The stator winding, consisting of 6 layer coils, 42 turns, and 9 pairs, is fabricated with microprocessing techniques. The micromotor has long operation lifetime, its running speed is stable and controllable, and rotational direction can be easily reversed. Maximum achieved rotational speed of 18000 r/min with maximum output torque of 1.5 μ N·m has been obtained. This paper presented the key technology for developing this kind of micromotor including the design of structure, magnetic circuit, heat problem, friction improvement, microprocessing techniques, and so on.