Characterization of tumors of jaw:Additive value of contrast enhancement and dual-energy computed tomography

BACKGROUND Currently,the differentiation of jaw tumors is mainly based on the lesion’s morphology rather than the enhancement characteristics,which are important in the differentiation of neoplasms across the body.There is a paucity of literature on the enhancement characteristics of jaw tumors.This is mainly because,even though computed tomography(CT)is used to evaluate these lesions,they are often imaged without intravenous contrast.This study hypothesised that the enhancement characteristics of the solid component of jaw tumors can aid in the differentiation of these lesions in addition to their morphology by dual-energy CT,therefore improving the ability to differentiate between various pathologies.AIM To evaluate the role of contrast enhancement and dual-energy quantitative parameters in CT in the differentiation of jaw tumors.METHODS Fifty-seven patients with jaw tumors underwent contrast-enhanced dual-energy CT.Morphological analysis of the tumor,including the enhancing solid component,was done,followed by quantitative analysis of iodine concentration(IC),water concentration(WC),HU,and normalized IC.The study population was divided into four subgroups based on histopathological analysis-central giant cell granuloma(CGCG),ameloblastoma,odontogenic keratocyst(OKC),and other jaw tumors.A one-way ANOVA test for parametric variables and the Kruskal-Wallis test for nonparametric variables were used.If significant differences were found,a series of independent t-tests or Mann-Whitney U tests were used.RESULTS Ameloblastoma was the most common pathology(n=20),followed by CGCG(n=11)and OKC.CGCG showed a higher mean concentration of all quantitative parameters than ameloblastomas(P<0.05).An IC threshold of 31.35×100μg/cm^(3) had the maximum sensitivity(81.8%)and specificity(65%).Between ameloblastomas and OKC,the former showed a higher mean concentration of all quantitative parameters(P<0.001),however when comparing unilocular ameloblastomas with OKCs,the latter showed significantly higher WC.Also,ameloblastoma had a higher IC and lower WC compared to“other jaw tumors”group.CONCLUSION Enhancement characteristics of solid components combined with dual-energy parameters offer a more precise way to differentiate between jaw tumors.

V-Shaped Monopole Antenna with Chichena Itzia Inspired Defected Ground Structure for UWB Applications

Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.

RIGID-PLASTIC MECHANICAL MODEL FOR THE FORGING METHOD WITH HORIZONTAL V-SHAPED ANVIL

In order to decrease the anisotropy of mechanical properties, the rigid-plastic mechanical model for the forging method with horizontal V-shaped anvil is presented. The forging method, through the change of anvils shape, is able to control fibrous tissue direction, to improve the anisotropy of mechanical properties of axial forgings, to realize uniform forging. Therefore, the forging method can overcome the defect that conventional forging methods produce. The mechanism of the forging method with horizontal V-shaped anvil and the process of metal deformation are analyzed. The agreement of theoretical analysis with experimental study verifies the fact that the forging method with horizontal V-shaped anvil can control effectively the mechanical properties of axial forgings.

An experimental investigation of the fracturing behaviour of rock-like materials containing two V-shaped parallelogram flaws

The distribution characteristics and evolution law of rock mass fissures induced by mining are a key scientific issue in the study of deep rock mechanics.In this study,a series of uniaxial compression experiments was conducted on rock-like specimens containing double V-shaped prefabricated fissures at dip angles ofα=β=45°,α=45°<b=60°,α=β=60°,andα=60°<β=75°with a rock mechanics servocontrolled testing system.According to the experimental results,the effects of the dip angles of the double V-shaped prefabricated flaws with the same area on the mechanical parameters and fracturing process of the specimens were analysed in detail.Additionally,the crack initiation stress presented a nearly linear growth trend,which is generally similar to that of the crack peak stress with increasing flaw dip angle.By applying photographic monitoring to the crack initiation,propagation,coalescence,and failure modes in rock-like specimens,it was easily seen that the V-shaped flaw properties slightly influence the crack initiation positions but significantly influence the crack trajectories.The crack failure modes can be summarized into two distinct types.The study reported herein can provide a better understanding of the evolution of double V-shaped prefabricated fissures induced by coal mining.

Scattering of SH waves induced by a symmetrical V-shaped canyon: a unified analytical solution

This paper reports a series solution of wave functions for two-dimensional scattering and diffraction of plane SH waves induced by a symmetrical V-shaped canyon with different shape ratios. A half-space with a symmetrical V-shaped canyon is divided into two sub-regions by using a circular-arc auxiliary boundary. The two sub-regions are represented by global and local cylindrical coordinate systems, respectively. In each coordinate system, the wave field satisfying the Helmholtz equation is represented by the separation of variables method, in terms of the series of both Bessel functions and Hankel functions with unknown complex coefficients. Then, the two wave fields are described in the local coordinate system using the Graf addition theorem. Finally, the unknown coefficients are sought by satisfying the continuity conditions of the auxiliary boundary. To consider the phase characteristics of the wave scattering, a parametric analysis is carried out in the time domain by assuming an incident signal of the Ricker type. Surface and subsurface transient responses demonstrate the characteristics and mechanisms of wave propagating and scattering.

Seismic analysis of high-speed railway irregular bridge–track system considering V-shaped canyon effect

To explore the effect of canyon topography on the seismic response of railway irregular bridge-track system that crosses a V-shaped canyon, seismic ground motions of the horizontal site and V-shaped canyon site were simulated through theoretical analysis with 12 earthquake records selected from the Pacific Earthquake Engineering Research Center(PEER) Strong Ground Motion Database matching the site condition of the bridge.Nonlinear seismic response analyses of an existing 11-span irregular simply supported railway bridge-track system were performed under the simulated spatially varying ground motions. The effects of the V-shaped canyon topography on the peak ground acceleration at bridge foundations and seismic responses of the bridge-track system were analyzed. Comparisons between the results of horizontal and V-shaped canyon sites show that the top relative displacement between adjacent piers at the junction of the incident side and the back side of the V-shaped site is almost two times that of the horizontal site, which also determines the seismic response of the fastener. The maximum displacement of the fastener occurs in the V-shaped canyon site and is 1.4 times larger than that in the horizontal site. Neglecting the effect of V-shaped canyon leads to the inappropriate assessment of the maximum seismic response of the irregular high-speed railway bridge-track system. Moreover, engineers should focus on the girder end to the left or right of the two fasteners within the distance of track seismic damage.

New Methods of Determining the Mixed Mode Stress Intensity Factors for V-Shaped Notch

In this paper, on the basis of the stress field given by D.H.Chen, three new photoelastic methods are developed for determining the stress intensity factors K1 and K2 of V-shaped notch. Some photoelastic experiments are performed on a skew -symmetric 45° notch. Measurements of the coordinates components of r,θand fringe order N are made for progressively smaller fringes and used in the proposed methods to solve K1 and K2.Plots of apparent K vs. r/l are made and extrapolated to the notch tip to yield the true values of K1 and K2.The results obtained by the three methods are very close to each other. When the notch problem is simplified as a crack problem, the corresponding equation is identical to the one proposed by D.G. Smith, which shows that the proposed methods are applicable for both notch and crack problems.

Light-extraction efficiency and forward voltage in GaN-based light-emitting diodes with different patterns of V-shaped pits

We present a new method of making a textured V-pit surface for improving the light extraction efficiency in GaN- based light-emitting diodes and compare it with the usual low-temperature method for p-GaN V-pits. Three types of GaNbased light-emitting diodes （LEDs） with surface V-pits in different densities and regions were grown by metal-organic chemical vapor deposition. We achieved the highest output power and lowest forward voltage values with the p-InGaN V-pit LED. The V-pits enhanced the light output power values by 1.45 times the values of the conventional LED owing to an enhancement of the light scattering probability and an effective reduction of Mg-acceptor activation energy. Moreover, this new technique effectively solved the higher forward voltage problem of the usual V-pit LED.

Wave Pressure Acting on V-Shaped Floating Breakwater in Random Seas

Wave pressure on the wet surface of a V-shaped floating breakwater in random seas is investigated. Considering the diffraction effect, the unit velocity potential caused by the single regular waves around the breakwater is solved using the finite-depth Green function and boundary element method, in which the Green function is solved by integral method. The Response-Amplitude Operator(RAO) of wave pressure is acquired according to the Longuet-Higgins' wave model and the linear Bernoulli equation. Furthermore, the wave pressure's response spectrum is calculated according to the wave spectrum by discretizing the frequency domain. The wave pressure's characteristic value corresponding to certain cumulative probability is determined according to the Rayleigh distribution of wave heights. The numerical results and field test results are compared, which indicates that the wave pressure calculated in random seas agrees with that of field measurements. It is found that the bigger angle between legs will cause the bigger pressure response, while the increase in leg length does not influence the pressure significantly. The pressure at the side of head sea is larger than that of back waves. When the incident wave angle changes from 0? to 90?, the pressure at the side of back waves decreases clearly, while at the side of head sea, the situation is more complicated and there seems no obvious tendency. The concentration of wave energy around low frequency(long wavelength) will induce bigger wave pressure, and more attention should be paid to this situation for the structure safety.

Electronic and transport properties of V-shaped defect zigzag MoS_2 nanoribbons

Based on the nonequilibrium Green＇s function （NEGF） in combination with density functional theory （DFT） calcu- lations, we study the electronic structures and transport properties of zigzag MoS2 nanoribbons （ZMNRs） with V-shaped vacancy defects on the edge. The vacancy formation energy results show that the zigzag vacancy is easier to create on the edge of ZMNR than the armchair vacancy. Both of the defects can make the electronic band structures of ZMNRs change from metal to semiconductor. The calculations of electronic transport properties depict that the currents drop off clearly and rectification ratios increase in the defected systems. These effects would open up possibilities for their applications in novel nanoelectronic devices.

Construction of a 3D Co(Ⅱ) Framework Based on Two Types of V-shaped Bidentate Ligands

A three-dimensional （3D） coordination polymer {[Co（bdc）（dpb）]·H2O}n （1） was prepared by solvothermal reaction of 1,3-dipyridyl benzene （dpb） with deprotonated 1,3-benzene- dicarboxylate （H2bdc）, and was characterized by elemental analysis, IR spectroscopy, and X-ray single-crystal diffraction. It crystallizes in the monoclinic system, space group C2/c with α = 15.478（6）, b = 12.865（5）, c = 24.091（10） ？, β = 95.599（5）°, V = 4774（3） ？3, C24H18CoN2O5, Mr = 473.34, Dc = 1.267 g/cm3, F（000） = 1864.0, μ = 0.748 mm-1 and Z = 8. Each Co（II） ion links three bdc2- anions to form an infinitely 1D ladder-shaped chain containing binuclear [（COO）Co]2 cluster, and dpb links adjacent 1D chains to form a 3D pcu framework. In addition, the UV-vis of 1 was also studied.

Carrier transport via V-shaped pits in InGaN/GaN MQW solar cells

Carrier transport via the V-shaped pits （V-pits） in InGaN/GaN multiple-quantum-well （MQW） solar cells is numer- ically investigated. By simulations, it is found that the V-pits can act as effective escape paths for the photo-generated carriers. Due to the thin barrier thickness and low indium composition of the MQW on V-pit sidewall, the carriers entered the sidewall QWs can easily escape and contribute to the photocurrent. This forms a parallel escape route for the carries generated in the fiat quantum wells. As the barrier thickness of the fiat MQW increases, more carriers would transport via the V-pits. Furthermore, it is found that the V-pits may reduce the recombination losses of carriers due to their screening effect to the dislocations. These discoveries are not only helpful for understanding the carrier transport mechanism in the InGaN/GaN MQW, but also important in design of the structure of solar cells.

Study on a W-band modified V-shaped microstrip meander-line traveling-wave tube

The study on a miniaturized, low-voltage, wide-bandwidth, high-efficiency modified V-shaped microstrip meander-line slow-wave structure is presented. This structure is evolved from the original U-shaped microstrip meander-line slow-wave structure, combining the advantages of a traditional microstrip and a rectangular helix. In this paper, simulations of the electromagnetic characteristics and the beam-wave interaction of this structure are carried out. Our study shows that when the design voltage and the current of a sheet electron beam are set to be 4700 V and 100 mA, respectively, this miniature millimeter-wave power amplifier is capable of delivering 160-W output power with a corresponding gain of 37.3 dB and a maximum interaction efficiency of 34% at 97 GHz.

Construction of a 2D Cd(II) Coordination Polymer Based on a V-shaped Bidentate Ligand

A two-dimensional（2D）coordination polymer{[Cd（bdc）（dpb）]·H2O}n（1）has been prepared by solvothermal reaction of 1,3-dipyridyl benzene（1,3-dpb）with deprotonated1,4-benzenedicarboxylate（H2bdc）,and was characterized by elemental analysis,IR spectroscopy,and X-ray single-crystal diffraction.It crystallizes in the monoclinic system,space group C2/c with a=15.1839（12）,b=20.7585（17）,c=7.2989（6）,β=117.3450（10）°,V=2043.5（3）3,C24H18N2O5Cd,Mr=526.81,Dc=1.712 g/cm3,F（000）=1056.0,μ=1.110 mm-1and Z=4.The neighboring Cd（II）ions link the bdc2-anions and 1,3-dpb to form an infinite 2D sheet,and such two2D sheets are interlocked with each other to form a 2D→2D sheet.Two groups of interlocked sheets are further linked together by intermolecularπ···πinteraction,giving a 3D supramolecular network.In addition,the fluorescence property of 1 was also studied.

Enhanced optical transmission by V-shaped nanoslit in metal film

In this paper, we reveal that the enhanced transmission through a perforated metal film can be further boosted up by a V-shaped nanoslit, which consists of two connected oblique slits. The maximum transmission at resonance can be enhanced significantly by 71.5% in comparison with the corresponding vertical slit with the same exit width. The value and position of transmission resonance peak strongly depend on the apex angle of the V-shaped slit. The optimum apex angle, at which the transmission is maximal, is sensitive to the slit width. Such phenomena can be well explained by a concrete picture in which the incident wave drives free electrons on the slit walls. Moreover, we also simply analyze the splitting of the transmission peak in the symmetry broken V-shaped slit, originating from the resonances of different parts of the V-shaped slit. We expect that our findings will be used to design the nanoscale light sources based on the metal nanoslit structures.

Effect of Mg-Preflow for p-AlGaN Electron Blocking Layer on the Electroluminescence of Green LEDs with V-Shaped Pits

In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.

Molecular events in the jaw vascular unit:A traditional review of the mechanisms involved in inflammatory jaw bone diseases

Inflammatory jaw bone diseases are common in stomatology,including periodontitis,peri-implantitis,medication-related osteonecrosis of the jaw,radiation osteomyelitis of the jaw,age-related osteoporosis,and other specific infections.These diseases may lead to tooth loss and maxillofacial deformities,severely affecting patients'quality of life.Over the years,the reconstruction of jaw bone deficiency caused by inflammatory diseases has emerged as a medical and socioeconomic challenge.Therefore,exploring the pathogenesis of inflammatory diseases associated with jaw bones is crucial for improving prognosis and developing new targeted therapies.Accumulating evidence indicates that the integrated bone formation and dysfunction arise from complex interactions among a network of multiple cell types,including osteoblast-associated cells,immune cells,blood vessels,and lymphatic vessels.However,the role of these different cells in the inflammatory process and the'rules'with which they interact are still not fully understood.Although many investigations have focused on specific pathological processes and molecular events in inflammatory jaw diseases,few articles offer a perspective of integration.Here,we review the changes and mechanisms of various cell types in inflammatory jaw diseases,with the hope of providing insights to drive future research in this field.

颌骨来源骨髓间充质干细胞成骨分化的特点、优势与应用

背景:颌面部骨组织缺损修复是目前研究的热点与难点,而种子细胞的选择是关键。颌骨来源骨髓间充质干细胞是存在于颌骨内的成体间充质干细胞,在颌面部组织再生方面的应用更具优势。目的:综述颌骨来源骨髓间充质干细胞的生物学特性和成骨分化优势以及药物、体内环境、微小RNA对其成骨分化影响的相关研究进展。方法:利用计算机在PubMed和中国知网进行文献检索。中文检索词为“口腔,骨组织工程,干细胞”,英文检索词为“oral,bone tissue engineering,stem cells”。共检索下载文章405篇,根据纳入与排除标准对文章进行筛选,最终纳入70篇文献进行综述。结果与结论:颌骨来源骨髓间充质干细胞是口腔骨组织工程的优良种子细胞,与长骨骨髓间充质干细胞相比,颌骨来源骨髓间充质干细胞具有更强的增殖能力和成骨分化能力。药物、体内环境、微小RNA均可以调控颌骨来源骨髓间充质干细胞的成骨分化,但目前对颌骨来源骨髓间充质干细胞的研究尚处于初始阶段,因此需要更多论证力较强的研究来证实其在颌面部骨组织再生领域的应用更具优势。

口腔修复诊疗中构建虚拟患者的机遇与挑战

在口腔修复领域,构建虚拟患者进行数字化仿生修复展现出广阔的应用前景。虚拟患者由包含口颌面部信息的数字化素材构成,能准确地反映出口颌面结构的形态和空间关系。然而,在数字化素材的获取、精确配准过程和动态颌位关系的记录与转移中,均存在诸多挑战。本文将围绕虚拟患者的构建流程,阐述目前构建虚拟患者的关键点和难点,推动虚拟患者技术在口腔修复领域的普及和推广。

48例Locator种植覆盖全口义齿5年临床修复效果评价

目的:观察Locator按扣式种植覆盖全口义齿的长期临床修复效果。方法:选择2016—2017年北京大学口腔医院门诊部采用Locator按扣式种植覆盖全口义齿修复的无牙颌患者48例,其中双颌全口义齿修复21例,单颌27例,共植入种植体230颗。观察种植体的留存率、种植体周黏膜探诊出血(BOP)、种植体周牙槽骨垂直吸收高度变化、义齿基托折裂和人工牙脱落折断等并发症,以及义齿固位力变化等。采用SPSS 13.0软件包对数据进行统计学分析。结果:在5年观察期间,5颗种植体脱落,1颗前牙区窄颈种植体颈部折断,12颗失访,种植体存留率为97.25%。种植修复后1年,48颗种植体周黏膜探诊出血(BOP+)(21.4%),平均出血指数(BI)为0.21±0.42,前牙区高于后牙区。种植体周牙槽骨垂直吸收高度为(0.21±0.35) mm,义齿基托折断2例。修复后5年,163颗种植体周黏膜探诊出血(BOP+)(76.89%),BI为1.00±0.70,种植体周牙槽骨垂直吸收高度为(0.58±0.85) mm;种植体周黏膜探诊出血指数与牙槽骨垂直吸收高度在男女之间、前牙区与后牙区之间均无统计学差异(P>0.05)。1年观察期和5年观察期间,种植体周黏膜平均出血指数、种植体周牙槽骨垂直吸收高度前后比较有显著差异(P<0.01)。义齿折裂17例,折裂率为26.15%,人工牙脱落折断率为16.92%,多发于前牙中线区及Locator基台附着体安放位置,因固位力下降首次更换Locator基台固位垫圈平均(34.2±10.3)个月。结论:Locator按扣式种植覆盖全口义齿有良好的临床修复效果。并发症多见于种植体周黏膜探诊出血和垂直向骨吸收,随着戴用时间延长有逐渐加重的趋势。其次是义齿基托折裂及人工牙脱落与折断,种植体脱落及折断。提示义齿制作时应加强金属支架在Locator基台位置和前牙中线区的强度,前牙区尽量避免使用窄径种植体。