The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine...The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.展开更多
In engineering,all movable expanse revolving objects manifest gyroscopic effects.These effects are created by the action of the outer load on the revolving items whose rotating mass originates eight inertial torques a...In engineering,all movable expanse revolving objects manifest gyroscopic effects.These effects are created by the action of the outer load on the revolving items whose rotating mass originates eight inertial torques about two axes.Two torques of centrifugal forces,one torque of the Coriolis force originated by the rotating distributed mass,and the torque of the change in the angular momentum of the center mass act about each axis.The inertial torques activate rotations of the gyroscope by the determined correlation.Inertial torques depend on their geometry and orientation at the spatial coordinate system.The known analytical model for the rotation of the revolving disc about axes contains a mechanical error.This error was obtained by the incorrect integration of the centrifugal inertial torque.The corrected inertial torque yields the accurate expression for the interacted rotations of the revolving disc about axes.展开更多
The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed ...The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed in CH_(4)/CO_(2)/Air flames with various CO_(2) doping ratio under equivalence ratios of 1.0–1.4.GRI 3.0 mech and Aramco mech are employed for predicting LBV,adiabatic flame temperature(AFT),important intermediate radicals(CH_(3),H,OH,O)and NO_(x) emissions(NO,NO_(2),N2O),as well as the sensitivity analysis is also conducted.The detail analysis of experiment and simulation reveals that as the CO_(2) addition increases from 0%to 40%,the LBVs and AFTs decrease monotonously.Under the same CO_(2) doping ratio,the LBVs and AFTs increase first and then decrease with the increase of equivalence ratio,and the maximum of LBV is reached at equivalence ratio of 1.05.The mole fraction tendency of important intermediates and NO_(x) with equivalence ratio and CO_(2) doping ratio are similar to the LBVs and AFTs.Reaction H+O_(2)⇔O+OH is found to be responsible for the promotion of the generation of important intermediates and NO_(x) under the equivalence ratios and CO_(2) addition through sensitivity analysis.The sensitivity coefficients of elementary reactions that the increasing of CO_(2) doping ratio promotes or inhibits formation of intermediate radicals and NO_(x) decreases.展开更多
On September 16,2021,a MS6.0 earthquake struck Luxian County,one of the shale gas blocks in the Southeastern Sichuan Basin,China.To understand the seismogenic environment and its mechanism,we inverted a fine three-dim...On September 16,2021,a MS6.0 earthquake struck Luxian County,one of the shale gas blocks in the Southeastern Sichuan Basin,China.To understand the seismogenic environment and its mechanism,we inverted a fine three-dimensional S-wave velocity model from ambient noise tomography using data from a newly deployed dense seismic array around the epicenter,by extracting and jointly inverting the Rayleigh phase and group velocities in the period of 1.6–7.2 s.The results showed that the velocity model varied significantly beneath different geological units.The Yujiasi syncline is characterized by low velocity at depths of~3.0–4.0 km,corresponding to the stable sedimentary layer in the Sichuan Basin.The eastern and western branches of the Huayingshan fault belt generally exhibit high velocities in the NE-SW direction,with a few local low-velocity zones.The Luxian MS6.0 earthquake epicenter is located at the boundary between the high-and low-velocity zones,and the earthquake sequences expand eastward from the epicenter at depths of 3.0–5.0 km.Integrated with the velocity variations around the epicenter,distribution of aftershock sequences,and focal mechanism solution,it is speculated that the seismogenic mechanism of the main shock might be interpreted as the reactivation of pre-existing faults by hydraulic fracturing.展开更多
The generalized mixture rule(GMR) is used to provide a unified framework for describing Young’s(E),shear(G) and bulk(K) moduli, Lame parameter(l), and P- and S-wave velocities(Vpand Vs) as a function of porosity in v...The generalized mixture rule(GMR) is used to provide a unified framework for describing Young’s(E),shear(G) and bulk(K) moduli, Lame parameter(l), and P- and S-wave velocities(Vpand Vs) as a function of porosity in various isotropic materials such as metals, ceramics and rocks. The characteristic J values of the GMR for E, G, K and l of each material are systematically different and display consistent correlations with the Poisson’s ratio of the nonporous material(v0). For the materials dominated by corner-shaped pores, the fixed point at which the effective Poisson’s ratio(n) remains constant is at v0=0.2, and J(G) > J(E) > J(K) > J(l) and J(G) < J(E) < J(K) < J(l) for materials with v0> 0.2 and v0< 0.2, respectively.J(Vs) > J(Vp) and J(Vs) < J(Vp) for the materials with v0> 0.2 and v0< 0.2, respectively. The effective n increases, decreases and remains unchanged with increasing porosity for the materials with v0< 0.2,v0> 0.2 and v0=0.2, respectively. For natural rocks containing thin-disk-shaped pores parallel to mineral cleavages, grain boundaries and foliation, however, the n fixed point decreases nonlinearly with decreasing pore aspect ratio(a: width/length). With increasing depth or pressure, cracks with smaller a values are progressively closed, making the n fixed point rise and finally reach to the point at v0=0.2.展开更多
The propagation of shock waves in a cellular bar is systematically studied in the framework of continuum solids by adopting two idealized material models, viz. the dynamic rigid, perfectly plastic, locking (D-R-PP-L...The propagation of shock waves in a cellular bar is systematically studied in the framework of continuum solids by adopting two idealized material models, viz. the dynamic rigid, perfectly plastic, locking (D-R-PP-L) model and the dynamic rigid, linear hardening plastic, locking (D-R-LHP-L) model, both considering the effects of strain-rate on the material properties. The shock wave speed relevant to these two models is derived. Consider the case of a bar made of one of such material with initial length L 0 and initial velocity v i impinging onto a rigid target. The variations of the stress, strain, particle velocity, specific internal energy across the shock wave and the cease distance of shock wave are all determined analytically. In particular the "energy conservation condition" and the "kinematic existence condition" as proposed by Tan et al. (2005) is re-examined, showing that the "energy conservation condition" and the consequent "critical velocity", i.e. the shock can only be generated and sustained in R-PP-L bars when the impact velocity is above this critical velocity, is incorrect. Instead, with elastic deformation, strain-hardening and strain-rate sensitivity of the cellular materials being considered, it is appropriate to redefine a first and a second critical impact velocity for the existence and propagation of shock waves in cellular solids. Starting from the basic relations for shock wave propagating in D-R-LHP-L cellular materials, a new method for inversely determining the dynamic stress-strain curve for cellular materials is proposed. By using e.g. a combination of Taylor bar and Hopkinson pressure bar impact experimental technique, the dynamic stress-strain curve of aluminum foam could bedetermined. Finally, it is demonstrated that this new formulation of shock theory in this one-dimensional stress state can be generalized to shocks in a one-dimensional strain state, i.e. for the case of plate impact on cellular materials, by simply making proper replacements of the elastic and plastic constants.展开更多
Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two...Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham's rheology equation of liquid phase and Bagnold's testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.展开更多
UHF surface velocities radar is developed based on the successful ocean state measuring and analyzing radar system. The design method for UHF radar system is presented. It is designed to operate at UHF channel, and th...UHF surface velocities radar is developed based on the successful ocean state measuring and analyzing radar system. The design method for UHF radar system is presented. It is designed to operate at UHF channel, and the transmit power is under 5W. Maximum range of field test over fresh water can be a kilometer. The field tests at Tangsun River and at Majiatan and Gaobazhou proved that USVR System can be used successfully.展开更多
A two?dimensional axisymmetric numerical simulation was successfully carried out on the muzzle flow field of a 300 mm?caliber counter?mass propelling gun. Based on the FLUENT software,using the finite volume method(FV...A two?dimensional axisymmetric numerical simulation was successfully carried out on the muzzle flow field of a 300 mm?caliber counter?mass propelling gun. Based on the FLUENT software,using the finite volume method(FVM)and the realizable k?ε turbulence model,we adopted the holistic movement of a partitioned mesh processing method coupled with the intermediate ballistic model and the six degree?of?freedom model(6?DOF). We compared the flow field characteristics at the velocity of 1 730.4,978.3,and 323.4 m/s. The results indicate that the pressure of the hypersonic initial flow field is much higher than that of the subsonic and supersonic initial flow fields. In the case of the subsonic(323.4 m/s)flow field,the tiny disturbance spreads throughout the whole domain. But in the cases of the supersonic(978.3 m/s) and the hypersonic(1 730.4 m/s) flow fields,it cannot spread to the upstream disturbance source,and the disturbance domain of the supersonic flow field is wider than that of the hypersonic. It is noted that the subsonic flow field has a rounded shock wave before the projectile. However,in the supersonic and hypersonic flow fields,a shear layer is formed which begins from the head of the projectile and extends outward from the side of the projectile. Then a multi?layer shock wave is formed composed of coronal shock waves,bottom shock waves,reflected shock waves,and Mach disk.展开更多
In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to wi...In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to windblown sand flux.In this paper,we achieved wind tunnel measurements of the movement of sand particles near sand bed through improving the wind tunnel experimental scheme of paticle image velocimetry(PIV) and data processing method.And then the influence of observation height on the probability distributions of lift-off and incident velocities of sand particles was analyzed.The results demonstrate that the observation height has no obvious influence on the distribution pattern of the lift-off and incident velocities of sand particles,i.e.,the probability distribution of horizontal and vertical velocities of lift-off and incident sand particles follow a Gaussian distribution and a negative exponential distribution,respectively.However,it influences the center of the Gaussian distribution,the decay constant and the amplitude of the negative exponential distribution.展开更多
One of the most challenging tasks in the laser-driven Hugoniot experiment is how to increase the reproducibility and precision of the experimental data to meet the stringent requirement in validating equation of state...One of the most challenging tasks in the laser-driven Hugoniot experiment is how to increase the reproducibility and precision of the experimental data to meet the stringent requirement in validating equation of state models. In such cases, the contribution of intrinsic uncertainty becomes important and cannot be ignored. A detailed analysis of the intrinsic uncertainty of the aluminum-iron impedance-match experiment based on the measurement of velocities is presented. The influence of mirror-reflection approximation on the shocked pressure of Fe and intrinsic uncertainties from the equation of state uncertainty of standard material are quantified, Furthermore, the comparison of intrinsic uncertainties of four different experimental approaches is presented. It is shown that, compared with other approaches including the most widely used approach which relies on the measurements of the shock velocities of AI and Fe, the approach which relies on the measurement of the particle velocity of Al and the shock velocity of Fe has the smallest intrinsic uncertainty, which would promote such work to significantly improve the diagnostics precision in such an approach.展开更多
In this paper,we propose a hybrid forecasting model to improve the forecasting accuracy for depth-averaged current velocities(DACVs) of underwater gliders.The hybrid model is based on a discrete wavelet transform(DWT)...In this paper,we propose a hybrid forecasting model to improve the forecasting accuracy for depth-averaged current velocities(DACVs) of underwater gliders.The hybrid model is based on a discrete wavelet transform(DWT),a deep belief network(DBN),and a least squares support vector machine(LSSVM).The original DACV series are first decomposed into several high-and one low-frequency subseries by DWT.Then,DBN is used for high-frequency component forecasting,and the LSSVM model is adopted for low-frequency subseries.The effectiveness of the proposed model is verified by two groups of DACV data from sea trials in the South China Sea.Based on four general error criteria,the forecast performance of the proposed model is demonstrated.The comparison models include some well-recognized single models and some related hybrid models.The performance of the proposed model outperformed those of the other methods indicated above.展开更多
Einstein's general relativity (GR) has become an inevitable part of deep space missions. According to the International Astronomical Union (IAU) Resolutions which are built in the framework of GR, several time sc...Einstein's general relativity (GR) has become an inevitable part of deep space missions. According to the International Astronomical Union (IAU) Resolutions which are built in the framework of GR, several time scales and reference systems are recommended to be used in the solar system for control, navigation and scientific op- eration of a spacecraft. Under the IAU Resolutions, we derive the transformations be- tween global and local velocities of an arbitrary orbiter. These transformations might be used in orbit determination with Doppler tracking and prediction of Doppler ob- servables for the spacecraft. Taking the YingHuo-1 Mission as a technical example of future Chinese Mars explorations, we evaluate the significance and contributions of various components in the transformations. The largest contribution of the relativistic parts in the transformations can reach the level of ~ 5 × 10-5 m s^-1. This suggests that, for such a spacecraft like we have assumed, if the accuracy of Doppler tracking is better than ~ 5 × 10-5 m s^-1 then the relativistic parts of the transformations of velocities will be required.展开更多
The paper compares the height growth velocities of male schoolchildren in South Korea and Japan over the period 1961-2018. Growth in height was measured with the same birth cohorts, not by comparing mean height of asc...The paper compares the height growth velocities of male schoolchildren in South Korea and Japan over the period 1961-2018. Growth in height was measured with the same birth cohorts, not by comparing mean height of ascending ages in the same year. Starting from a lower economic base and mean height in the 1960s, high school males aged 17 in South Korea became 3 cm taller in mean height than their Japanese peers in the mid-2000s versus 2 - 3 cm shorter in the 1960s through 1970s. Children in Japan ceased to grow taller by the end of the 1980s, not because they quit taking more animal-sourced foods, meat and milk, but because they had drastically steered away from fruit and vegetables in their diets since the end of the 1970s. Having largely converged economically with Japan, South Korean children ceased to grow any taller in the mid-2000s. More importantly, it was discovered in this study that successive cohorts in South Korea started to fall gradually but steadily in height growth velocity from 1<sup><span style="font-family:Verdana;font-size:12px;">st</span></sup><span style="font-family:Verdana;font-size:12px;"> graders in middle school, aged 12 years to 3</span><sup><span style="font-family:Verdana;font-size:12px;">rd</span></sup><span style="font-family:Verdana;font-size:12px;"> graders in high school, </span><span style="font-family:Verdana;">and </span><span style="font-family:Verdana;">aged 17 years, to be once again 3 cm below their Japanese peers in the early-2010s. Analysis of Korea Household Expenditure Surveys classified by age groups of household head, decomposed by the author, revealed that children under 20 years of age in South Korea began to steer away from fruit and, particularly, vegetables in their at-home consumption in the mid-1990s, to average only 15% of the level of older adults in their 50s in the mid-2010s. These results lend supports to the importance of fruit and vegetables as determinants in height and its growth velocities in two genetically similar nations over time and stages of economic growth.</span>展开更多
On August 7^(th),2010,Sanyanyu and Luojiayu debris flows triggered by a heavy rain have lashed Zhouqu City around midnight,leading to catastrophic destruction which killed 1765 people and resulted in enormous economic...On August 7^(th),2010,Sanyanyu and Luojiayu debris flows triggered by a heavy rain have lashed Zhouqu City around midnight,leading to catastrophic destruction which killed 1765 people and resulted in enormous economic loss.The ZHQ Seismic Station is located approximately 170 m west of the outlet of the Sanyanyu Gully.The seismometer deployed at the seismic station started recording seismic signals of ever-enlarging amplitude around 10 minutes before the debris flow rushed out of the Sanyanyu Gully,showing ever approaching seismic source,i.e.the debris flow.In this study,we analyze this seismic event and propose an inversion algorithm to estimate the velocity of the debris flow by searching the best-fitting pairs of envelopes in the synthetic seismograms and the corresponding field seismic records in a least-square sense.Inversion results reveal that,before rushing out of the outlet,the average velocity of the debris flow gradually increased from 6.2 m/s to 7.1 m/s and finally reached 15 m/s at approximately 0.5 km above the outlet and kept this value since then.Obviously,the ever-increasing velocity of the debris flow is the key factor for the following disasters.Compared with other studies,our approach can provide the velocity distribution for the debris flow before its outbreak;Besides,it has the potential to provide technological support for a better understanding of the disaster process of a debris flow.展开更多
Measurement of ice velocities of the Antarctic glaciers is very important for studies on Antarctic ice and snow mass balance. The polar area environmental change and its influences on the global environment. Conventio...Measurement of ice velocities of the Antarctic glaciers is very important for studies on Antarctic ice and snow mass balance. The polar area environmental change and its influences on the global environment. Conventional methods may be used for measuring the ice velocities, but they suffer from severe weather conditions in the Polar areas. Use of satellite multi-spectral and muki-temporal images makes it easier to measure the velocities of the glacier movements. This paper discusses a new method for monitoring the glacial change by means of multi-temporal satellite images. Temporal remotely sensed images in the Ingrid Christensen coast were processed with respect to geometric rectification, registration and overlay, The average ice velocities of the Polar Record Glacier and the Dark Glacier were then calculated, with the changing characteristics analyzed and evaluated. The advantages of the method reported here include promise of all-weather operation and potentials of dynamic monitoring through suitable selection of temporal satellite images.展开更多
Bused on the wave equations established by the authors, the characteristics of propagation velocities of elastic vaves in saturated soils arc analyzed and verified by ultrasonic test in laboratory and seismic survey i...Bused on the wave equations established by the authors, the characteristics of propagation velocities of elastic vaves in saturated soils arc analyzed and verified by ultrasonic test in laboratory and seismic survey in the field. The results provide theoretical basis for the determination of physical and mechanical parameters of saturated soils using propagation velocities of elastic waves. especially P-wave Velocity.展开更多
In the past, most of the studies for compressional velocities are based on experimental measurements, which lack the support of field data. The purpose of this study is to estimate the compressional velocities based o...In the past, most of the studies for compressional velocities are based on experimental measurements, which lack the support of field data. The purpose of this study is to estimate the compressional velocities based on well log data of delta front subfacies of Lower Tertiary ages of Ji-Dong oil field, China. At initial stage, we have chosen the well log parameters (effect factors) which strongly influence on compressional velocities and established a new modified equation for compressional velocities, which is based on these effect factors. Then Gardner, De-hua Han and this newly established equation were utilized to calculate the compressional velocities in each well. Finally, Least-square regression was carried out to check the fitting of each equation. Regression results clearly indicate that our purposed equation shows better fitting as compared to Gardner and De-hua Han equations.展开更多
Secondary storage spaces with very complex geometries are well developed in Ordovician carbonate reservoirs in the Tarim Basin,which is taken as a study case in this paper.It is still not clear how the secondary stora...Secondary storage spaces with very complex geometries are well developed in Ordovician carbonate reservoirs in the Tarim Basin,which is taken as a study case in this paper.It is still not clear how the secondary storage space shape influences the P-& S-wave velocities (or elastic properties) in complex carbonate reservoirs.In this paper,three classical rock physics models (Wyllie timeaverage equation,Gassmann equation and the Kuster-Toks z model) are comparably analyzed for their construction principles and actual velocity prediction results,aiming at determining the most favourable rock physics model to consider the influence of secondary storage space shape.Then relationships between the P-& S-wave velocities in carbonate reservoirs and geometric shapes of secondary storage spaces are discussed from different aspects based on actual well data by employing the favourable rock physics model.To explain the influence of secondary storage space shape on V P-V S relationship,it is analyzed for the differences of S-wave velocities between derived from common empirical relationships (including Castagna's mud rock line and Greenberg-Castagna V P-V S relationship) and predicted by the rock physics model.We advocate that V P-V S relationship for complex carbonate reservoirs should be built for different storage space types.For the carbonate reservoirs in the Tarim Basin,the V P-V S relationships for fractured,fractured-cavernous,and fractured-hole-vuggy reservoirs are respectively built on the basis of velocity prediction and secondary storage space type determination.Through the discussion above,it is expected that the velocity prediction and the V P-V S relationships for complex carbonate reservoirs should fully consider the influence of secondary storage space shape,thus providing more reasonable constraints for prestack inversion,further building a foundation for realizing carbonate reservoir prediction and fluid prediction.展开更多
The probability distributions of sand particles' lift-off and incident velocities in a wind-blown sand flux play very important roles in the simulation of the wind-blown sand movement. In this paper, the vertical and...The probability distributions of sand particles' lift-off and incident velocities in a wind-blown sand flux play very important roles in the simulation of the wind-blown sand movement. In this paper, the vertical and the horizontal speeds of sand particles located at 1.0 mm above a sand-bed in a wind-blown sand flux are observed with the aid of Phase Doppler Anemometry (PDA) in a wind tunnel. Based on the experimental data, the probability distributions of not only the vertical lift-off speed but also the lift-off velocity as well as its horizontal component and the incident velocity as well as its vertical and horizontal components can be obtained by the equal distance histogram method. It is found, according to the results of the X^2-test for these probability distributions, that the probability density functions (pdf's) of the sand particles' lift-off and incident velocities as well as their vertical com- ponents are described by the Gamma density function with different peak values and shapes and the downwind incident and lift-off horizontal speeds, respectively, can be described by the lognormal and the Gamma density functions, These pdf's depend on not only the sand particle diameter but also the wind speed.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11872121)。
文摘The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.
文摘In engineering,all movable expanse revolving objects manifest gyroscopic effects.These effects are created by the action of the outer load on the revolving items whose rotating mass originates eight inertial torques about two axes.Two torques of centrifugal forces,one torque of the Coriolis force originated by the rotating distributed mass,and the torque of the change in the angular momentum of the center mass act about each axis.The inertial torques activate rotations of the gyroscope by the determined correlation.Inertial torques depend on their geometry and orientation at the spatial coordinate system.The known analytical model for the rotation of the revolving disc about axes contains a mechanical error.This error was obtained by the incorrect integration of the centrifugal inertial torque.The corrected inertial torque yields the accurate expression for the interacted rotations of the revolving disc about axes.
基金The authors would like to thank the National Natural Science Foundation of China(52176095)Anhui Provincial Natural Science Foundation(2008085J25)the Project of support program for outstanding young people in Colleges and Universities(gxyqZD201830)for their financial support of this study.
文摘The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed in CH_(4)/CO_(2)/Air flames with various CO_(2) doping ratio under equivalence ratios of 1.0–1.4.GRI 3.0 mech and Aramco mech are employed for predicting LBV,adiabatic flame temperature(AFT),important intermediate radicals(CH_(3),H,OH,O)and NO_(x) emissions(NO,NO_(2),N2O),as well as the sensitivity analysis is also conducted.The detail analysis of experiment and simulation reveals that as the CO_(2) addition increases from 0%to 40%,the LBVs and AFTs decrease monotonously.Under the same CO_(2) doping ratio,the LBVs and AFTs increase first and then decrease with the increase of equivalence ratio,and the maximum of LBV is reached at equivalence ratio of 1.05.The mole fraction tendency of important intermediates and NO_(x) with equivalence ratio and CO_(2) doping ratio are similar to the LBVs and AFTs.Reaction H+O_(2)⇔O+OH is found to be responsible for the promotion of the generation of important intermediates and NO_(x) under the equivalence ratios and CO_(2) addition through sensitivity analysis.The sensitivity coefficients of elementary reactions that the increasing of CO_(2) doping ratio promotes or inhibits formation of intermediate radicals and NO_(x) decreases.
基金This work was supported by the Special Fund of the Institute of Geophysics,China Earthquake Administration(Nos.DQJB22B19,DQJB22R29 and DQJB22B26)the National Natural Science Foundation of China(Nos.41974066,U1839209 and 42074053)。
文摘On September 16,2021,a MS6.0 earthquake struck Luxian County,one of the shale gas blocks in the Southeastern Sichuan Basin,China.To understand the seismogenic environment and its mechanism,we inverted a fine three-dimensional S-wave velocity model from ambient noise tomography using data from a newly deployed dense seismic array around the epicenter,by extracting and jointly inverting the Rayleigh phase and group velocities in the period of 1.6–7.2 s.The results showed that the velocity model varied significantly beneath different geological units.The Yujiasi syncline is characterized by low velocity at depths of~3.0–4.0 km,corresponding to the stable sedimentary layer in the Sichuan Basin.The eastern and western branches of the Huayingshan fault belt generally exhibit high velocities in the NE-SW direction,with a few local low-velocity zones.The Luxian MS6.0 earthquake epicenter is located at the boundary between the high-and low-velocity zones,and the earthquake sequences expand eastward from the epicenter at depths of 3.0–5.0 km.Integrated with the velocity variations around the epicenter,distribution of aftershock sequences,and focal mechanism solution,it is speculated that the seismogenic mechanism of the main shock might be interpreted as the reactivation of pre-existing faults by hydraulic fracturing.
文摘The generalized mixture rule(GMR) is used to provide a unified framework for describing Young’s(E),shear(G) and bulk(K) moduli, Lame parameter(l), and P- and S-wave velocities(Vpand Vs) as a function of porosity in various isotropic materials such as metals, ceramics and rocks. The characteristic J values of the GMR for E, G, K and l of each material are systematically different and display consistent correlations with the Poisson’s ratio of the nonporous material(v0). For the materials dominated by corner-shaped pores, the fixed point at which the effective Poisson’s ratio(n) remains constant is at v0=0.2, and J(G) > J(E) > J(K) > J(l) and J(G) < J(E) < J(K) < J(l) for materials with v0> 0.2 and v0< 0.2, respectively.J(Vs) > J(Vp) and J(Vs) < J(Vp) for the materials with v0> 0.2 and v0< 0.2, respectively. The effective n increases, decreases and remains unchanged with increasing porosity for the materials with v0< 0.2,v0> 0.2 and v0=0.2, respectively. For natural rocks containing thin-disk-shaped pores parallel to mineral cleavages, grain boundaries and foliation, however, the n fixed point decreases nonlinearly with decreasing pore aspect ratio(a: width/length). With increasing depth or pressure, cracks with smaller a values are progressively closed, making the n fixed point rise and finally reach to the point at v0=0.2.
基金supported by the National Natural Science Foundation of China (11032001)the K.C.Wong Magna Fund in Ningbo University
文摘The propagation of shock waves in a cellular bar is systematically studied in the framework of continuum solids by adopting two idealized material models, viz. the dynamic rigid, perfectly plastic, locking (D-R-PP-L) model and the dynamic rigid, linear hardening plastic, locking (D-R-LHP-L) model, both considering the effects of strain-rate on the material properties. The shock wave speed relevant to these two models is derived. Consider the case of a bar made of one of such material with initial length L 0 and initial velocity v i impinging onto a rigid target. The variations of the stress, strain, particle velocity, specific internal energy across the shock wave and the cease distance of shock wave are all determined analytically. In particular the "energy conservation condition" and the "kinematic existence condition" as proposed by Tan et al. (2005) is re-examined, showing that the "energy conservation condition" and the consequent "critical velocity", i.e. the shock can only be generated and sustained in R-PP-L bars when the impact velocity is above this critical velocity, is incorrect. Instead, with elastic deformation, strain-hardening and strain-rate sensitivity of the cellular materials being considered, it is appropriate to redefine a first and a second critical impact velocity for the existence and propagation of shock waves in cellular solids. Starting from the basic relations for shock wave propagating in D-R-LHP-L cellular materials, a new method for inversely determining the dynamic stress-strain curve for cellular materials is proposed. By using e.g. a combination of Taylor bar and Hopkinson pressure bar impact experimental technique, the dynamic stress-strain curve of aluminum foam could bedetermined. Finally, it is demonstrated that this new formulation of shock theory in this one-dimensional stress state can be generalized to shocks in a one-dimensional strain state, i.e. for the case of plate impact on cellular materials, by simply making proper replacements of the elastic and plastic constants.
基金Project supported by the Talent Fund of the Ministry of Communication of China(No.95050508) the Fund of Western Communication of China(No.200332822047) the Key Science Fund of the Ministry of Communication of China(No.95060233)
文摘Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham's rheology equation of liquid phase and Bagnold's testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.
文摘UHF surface velocities radar is developed based on the successful ocean state measuring and analyzing radar system. The design method for UHF radar system is presented. It is designed to operate at UHF channel, and the transmit power is under 5W. Maximum range of field test over fresh water can be a kilometer. The field tests at Tangsun River and at Majiatan and Gaobazhou proved that USVR System can be used successfully.
基金supported in part by the National Natural Science Foundation of China (No. 51305204)
文摘A two?dimensional axisymmetric numerical simulation was successfully carried out on the muzzle flow field of a 300 mm?caliber counter?mass propelling gun. Based on the FLUENT software,using the finite volume method(FVM)and the realizable k?ε turbulence model,we adopted the holistic movement of a partitioned mesh processing method coupled with the intermediate ballistic model and the six degree?of?freedom model(6?DOF). We compared the flow field characteristics at the velocity of 1 730.4,978.3,and 323.4 m/s. The results indicate that the pressure of the hypersonic initial flow field is much higher than that of the subsonic and supersonic initial flow fields. In the case of the subsonic(323.4 m/s)flow field,the tiny disturbance spreads throughout the whole domain. But in the cases of the supersonic(978.3 m/s) and the hypersonic(1 730.4 m/s) flow fields,it cannot spread to the upstream disturbance source,and the disturbance domain of the supersonic flow field is wider than that of the hypersonic. It is noted that the subsonic flow field has a rounded shock wave before the projectile. However,in the supersonic and hypersonic flow fields,a shear layer is formed which begins from the head of the projectile and extends outward from the side of the projectile. Then a multi?layer shock wave is formed composed of coronal shock waves,bottom shock waves,reflected shock waves,and Mach disk.
基金supported by the National Natural Science Foundation of China (11072097, 11232006, 11202088, 10972164 and 11121202)the Science Foundation of Ministry of Education of China (308022)+1 种基金Fundamental Research Funds for the Central Universities (lzujbky-2009-k01)the Project of the Ministry of Science and Technology of China (2009CB421304)
文摘In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to windblown sand flux.In this paper,we achieved wind tunnel measurements of the movement of sand particles near sand bed through improving the wind tunnel experimental scheme of paticle image velocimetry(PIV) and data processing method.And then the influence of observation height on the probability distributions of lift-off and incident velocities of sand particles was analyzed.The results demonstrate that the observation height has no obvious influence on the distribution pattern of the lift-off and incident velocities of sand particles,i.e.,the probability distribution of horizontal and vertical velocities of lift-off and incident sand particles follow a Gaussian distribution and a negative exponential distribution,respectively.However,it influences the center of the Gaussian distribution,the decay constant and the amplitude of the negative exponential distribution.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11305156 and 11305159
文摘One of the most challenging tasks in the laser-driven Hugoniot experiment is how to increase the reproducibility and precision of the experimental data to meet the stringent requirement in validating equation of state models. In such cases, the contribution of intrinsic uncertainty becomes important and cannot be ignored. A detailed analysis of the intrinsic uncertainty of the aluminum-iron impedance-match experiment based on the measurement of velocities is presented. The influence of mirror-reflection approximation on the shocked pressure of Fe and intrinsic uncertainties from the equation of state uncertainty of standard material are quantified, Furthermore, the comparison of intrinsic uncertainties of four different experimental approaches is presented. It is shown that, compared with other approaches including the most widely used approach which relies on the measurements of the shock velocities of AI and Fe, the approach which relies on the measurement of the particle velocity of Al and the shock velocity of Fe has the smallest intrinsic uncertainty, which would promote such work to significantly improve the diagnostics precision in such an approach.
基金The National Natural Science Foundation of China under contract Nos U1709202 and 51809127the Natural Science Foundation of Shanxi ProvinceChina under contract No.201901D211248。
文摘In this paper,we propose a hybrid forecasting model to improve the forecasting accuracy for depth-averaged current velocities(DACVs) of underwater gliders.The hybrid model is based on a discrete wavelet transform(DWT),a deep belief network(DBN),and a least squares support vector machine(LSSVM).The original DACV series are first decomposed into several high-and one low-frequency subseries by DWT.Then,DBN is used for high-frequency component forecasting,and the LSSVM model is adopted for low-frequency subseries.The effectiveness of the proposed model is verified by two groups of DACV data from sea trials in the South China Sea.Based on four general error criteria,the forecast performance of the proposed model is demonstrated.The comparison models include some well-recognized single models and some related hybrid models.The performance of the proposed model outperformed those of the other methods indicated above.
基金Supported by the National Natural Science Foundation of China
文摘Einstein's general relativity (GR) has become an inevitable part of deep space missions. According to the International Astronomical Union (IAU) Resolutions which are built in the framework of GR, several time scales and reference systems are recommended to be used in the solar system for control, navigation and scientific op- eration of a spacecraft. Under the IAU Resolutions, we derive the transformations be- tween global and local velocities of an arbitrary orbiter. These transformations might be used in orbit determination with Doppler tracking and prediction of Doppler ob- servables for the spacecraft. Taking the YingHuo-1 Mission as a technical example of future Chinese Mars explorations, we evaluate the significance and contributions of various components in the transformations. The largest contribution of the relativistic parts in the transformations can reach the level of ~ 5 × 10-5 m s^-1. This suggests that, for such a spacecraft like we have assumed, if the accuracy of Doppler tracking is better than ~ 5 × 10-5 m s^-1 then the relativistic parts of the transformations of velocities will be required.
文摘The paper compares the height growth velocities of male schoolchildren in South Korea and Japan over the period 1961-2018. Growth in height was measured with the same birth cohorts, not by comparing mean height of ascending ages in the same year. Starting from a lower economic base and mean height in the 1960s, high school males aged 17 in South Korea became 3 cm taller in mean height than their Japanese peers in the mid-2000s versus 2 - 3 cm shorter in the 1960s through 1970s. Children in Japan ceased to grow taller by the end of the 1980s, not because they quit taking more animal-sourced foods, meat and milk, but because they had drastically steered away from fruit and vegetables in their diets since the end of the 1970s. Having largely converged economically with Japan, South Korean children ceased to grow any taller in the mid-2000s. More importantly, it was discovered in this study that successive cohorts in South Korea started to fall gradually but steadily in height growth velocity from 1<sup><span style="font-family:Verdana;font-size:12px;">st</span></sup><span style="font-family:Verdana;font-size:12px;"> graders in middle school, aged 12 years to 3</span><sup><span style="font-family:Verdana;font-size:12px;">rd</span></sup><span style="font-family:Verdana;font-size:12px;"> graders in high school, </span><span style="font-family:Verdana;">and </span><span style="font-family:Verdana;">aged 17 years, to be once again 3 cm below their Japanese peers in the early-2010s. Analysis of Korea Household Expenditure Surveys classified by age groups of household head, decomposed by the author, revealed that children under 20 years of age in South Korea began to steer away from fruit and, particularly, vegetables in their at-home consumption in the mid-1990s, to average only 15% of the level of older adults in their 50s in the mid-2010s. These results lend supports to the importance of fruit and vegetables as determinants in height and its growth velocities in two genetically similar nations over time and stages of economic growth.</span>
基金sponsored by the 973 Program(2013CB733206)the 863 Program(2012AA121300)。
文摘On August 7^(th),2010,Sanyanyu and Luojiayu debris flows triggered by a heavy rain have lashed Zhouqu City around midnight,leading to catastrophic destruction which killed 1765 people and resulted in enormous economic loss.The ZHQ Seismic Station is located approximately 170 m west of the outlet of the Sanyanyu Gully.The seismometer deployed at the seismic station started recording seismic signals of ever-enlarging amplitude around 10 minutes before the debris flow rushed out of the Sanyanyu Gully,showing ever approaching seismic source,i.e.the debris flow.In this study,we analyze this seismic event and propose an inversion algorithm to estimate the velocity of the debris flow by searching the best-fitting pairs of envelopes in the synthetic seismograms and the corresponding field seismic records in a least-square sense.Inversion results reveal that,before rushing out of the outlet,the average velocity of the debris flow gradually increased from 6.2 m/s to 7.1 m/s and finally reached 15 m/s at approximately 0.5 km above the outlet and kept this value since then.Obviously,the ever-increasing velocity of the debris flow is the key factor for the following disasters.Compared with other studies,our approach can provide the velocity distribution for the debris flow before its outbreak;Besides,it has the potential to provide technological support for a better understanding of the disaster process of a debris flow.
文摘Measurement of ice velocities of the Antarctic glaciers is very important for studies on Antarctic ice and snow mass balance. The polar area environmental change and its influences on the global environment. Conventional methods may be used for measuring the ice velocities, but they suffer from severe weather conditions in the Polar areas. Use of satellite multi-spectral and muki-temporal images makes it easier to measure the velocities of the glacier movements. This paper discusses a new method for monitoring the glacial change by means of multi-temporal satellite images. Temporal remotely sensed images in the Ingrid Christensen coast were processed with respect to geometric rectification, registration and overlay, The average ice velocities of the Polar Record Glacier and the Dark Glacier were then calculated, with the changing characteristics analyzed and evaluated. The advantages of the method reported here include promise of all-weather operation and potentials of dynamic monitoring through suitable selection of temporal satellite images.
文摘Bused on the wave equations established by the authors, the characteristics of propagation velocities of elastic vaves in saturated soils arc analyzed and verified by ultrasonic test in laboratory and seismic survey in the field. The results provide theoretical basis for the determination of physical and mechanical parameters of saturated soils using propagation velocities of elastic waves. especially P-wave Velocity.
文摘In the past, most of the studies for compressional velocities are based on experimental measurements, which lack the support of field data. The purpose of this study is to estimate the compressional velocities based on well log data of delta front subfacies of Lower Tertiary ages of Ji-Dong oil field, China. At initial stage, we have chosen the well log parameters (effect factors) which strongly influence on compressional velocities and established a new modified equation for compressional velocities, which is based on these effect factors. Then Gardner, De-hua Han and this newly established equation were utilized to calculate the compressional velocities in each well. Finally, Least-square regression was carried out to check the fitting of each equation. Regression results clearly indicate that our purposed equation shows better fitting as compared to Gardner and De-hua Han equations.
基金co-supported by the National Basic Research Program of China(Grant No.2011CB201103)the National Science and Technology Major Project(Grant No.2011ZX05004003)
文摘Secondary storage spaces with very complex geometries are well developed in Ordovician carbonate reservoirs in the Tarim Basin,which is taken as a study case in this paper.It is still not clear how the secondary storage space shape influences the P-& S-wave velocities (or elastic properties) in complex carbonate reservoirs.In this paper,three classical rock physics models (Wyllie timeaverage equation,Gassmann equation and the Kuster-Toks z model) are comparably analyzed for their construction principles and actual velocity prediction results,aiming at determining the most favourable rock physics model to consider the influence of secondary storage space shape.Then relationships between the P-& S-wave velocities in carbonate reservoirs and geometric shapes of secondary storage spaces are discussed from different aspects based on actual well data by employing the favourable rock physics model.To explain the influence of secondary storage space shape on V P-V S relationship,it is analyzed for the differences of S-wave velocities between derived from common empirical relationships (including Castagna's mud rock line and Greenberg-Castagna V P-V S relationship) and predicted by the rock physics model.We advocate that V P-V S relationship for complex carbonate reservoirs should be built for different storage space types.For the carbonate reservoirs in the Tarim Basin,the V P-V S relationships for fractured,fractured-cavernous,and fractured-hole-vuggy reservoirs are respectively built on the basis of velocity prediction and secondary storage space type determination.Through the discussion above,it is expected that the velocity prediction and the V P-V S relationships for complex carbonate reservoirs should fully consider the influence of secondary storage space shape,thus providing more reasonable constraints for prestack inversion,further building a foundation for realizing carbonate reservoir prediction and fluid prediction.
基金The project supported by the National Natural Science Foundation of China(10532040)the Hundred Talents Project.the Knowledge Innovation Project of Chinese Academy of Sciences(KZCX2-304).
文摘The probability distributions of sand particles' lift-off and incident velocities in a wind-blown sand flux play very important roles in the simulation of the wind-blown sand movement. In this paper, the vertical and the horizontal speeds of sand particles located at 1.0 mm above a sand-bed in a wind-blown sand flux are observed with the aid of Phase Doppler Anemometry (PDA) in a wind tunnel. Based on the experimental data, the probability distributions of not only the vertical lift-off speed but also the lift-off velocity as well as its horizontal component and the incident velocity as well as its vertical and horizontal components can be obtained by the equal distance histogram method. It is found, according to the results of the X^2-test for these probability distributions, that the probability density functions (pdf's) of the sand particles' lift-off and incident velocities as well as their vertical com- ponents are described by the Gamma density function with different peak values and shapes and the downwind incident and lift-off horizontal speeds, respectively, can be described by the lognormal and the Gamma density functions, These pdf's depend on not only the sand particle diameter but also the wind speed.