Evaluation of a rabbit rectal VX2 carcinoma model using computed tomography and magnetic resonance imaging

AIM： To establish a rabbit rectal VX2 carcinoma model for the study of rectal carcinoma.METHODS： A suspension of VX2 cells was injected into the rectum wall under the guidance of X-ray fluoroscopy. Computed tomography （CT） and magnetic resonance imaging （MRI） were used to observe tumorgrowth and metastasis at different phases. Pathological changes and spontaneous survival time of the rabbits were recorded.RESULTS： Two weeks after VX2 cell implantation, the tumor diameter ranged 4.1-5.8 mm and the success implantation rate was 81.8%. CT scanning showed low-density loci of the tumor in the rectum wail, while enhanced CT scanning demonstrated a symmetrical intensification in tumor loci. MRI scanning showed alow signal of the tumor on T1-weighted imaging anda high signal of the tumor on T2-weighted imaging.Both types of signals were intensified with enhanced MRI. Metastases to the liver and lung could beobserved 6 wk after VX2 cell implantation, and a largearea of necrosis appeared in the primary tumor. The spontaneous survival time of rabbits with cachexia and multiple organ failure was about 7 wk after VX2 cell implantation.CONCLUSION： The rabbit rectal VX2 carcinoma model we established has a high stability, and can be used in the study of rectal carcinoma.

Establishment of VX2 breast carcinoma model in rabbit by injecting tumor mass suspension

Objective: To establish a stable model of VX2 breast carcinoma in rabbit and select the optimal way. Methods: Thirty female New Zealand rabbits were randomly divided into 3 groups with 10 in each. Tumor cell suspensions or tumor mass suspensions were injected into breast tissues of rabbits of group A and B, respectively. Tumor blocks were surgically implanted in rabbit breasts of group C. Tumor formation rate, tumor growth rate, and tumor-bearing survival time was compared, and the histological feature of tumor was observed. Results: Models were established conveniently and successfully in rabbits received injection of tumor mass suspensions. Tumor proliferated rapidly with the biological feature of squamous cell carcinoma. Conclusion: VX2 breast carcinoma model in rabbit was established successfully. Intramammary injection of tumor mass suspension is the best method.

Radiosensitivity of β-elemene on rabbit VX2 renal transplant carcinoma model

Objective To investigate the effects of low dosage of β-elemene on the radiosensitivity of rabbit VX2 renal transplant carcinoma model. Methods We took the rabbit VX2 renal transplant carcinoma as the model. Experimental rabbits were divided into three groups: the control group, the radiation group, and the radiation +β-elemene (radiosensitivity) group. The change of tumor was observed by Spiral CT and B ultrasound to compare its regrowth period. The tumor was measured by light microscopy and electron microscopy. Results The tumor in radiosensitivity group was restrained obviously and the sensitization enhancement ratio (SER) of β-elemene was 1.89. Different apoptosis was observed under transmission electron microscopy. Conclusion Low dosage β-elemene can enhance the radiosensitivity of rabbit VX2 renal transplant carcinoma model and induce the apoptosis of tumor cells, but the mechanism needs further study. It promotes apoptosis in mechanisms in vitro.

Establishing models of portal vein occlusion and evaluating value of multi-slice CT in hepatic VX2 tumor in rabbits

AIM： To establish models of portal vein occlusion of hepatic VX2 tumor in rabbits and to evaluate the value of multi-slice CT. METHODS： Forty New Zealand rabbits were divided into 4 groups according to digital table： Immediate group （group A; transplantation of tumor immediately after the portal vein occlusion）, 3-wk group （group B; transplantation of tumor at 3 wk after the portal vein occlusion）, negative control group （group C） and positive control group （group D）, 10 rabbits in each group. Hepatic VX2 tumor was transplanted with abdominalembedding innoculation immediately after the portal vein occlusion and at 3 wk after the portal vein occlusion. Meanwhile, they were divided into negative control group （Left external branch of portal vein was occluded by sham-operation, and left exite was embedded and inoculated pseudoly） and positive control group （Transplanted tumor did not suffer from the portal vein occlusion）. All rabbits were scanned with multi-slice CT. RESULTS： All 40 animals were employed in the final analysis without death. Tumor did not grow in both immediate group and 3-wk group. In 3-wk group, left endite was atrophied and growth of tumor was inhibited. The maximal diameter of tumor was significantly smaller than that in positive control group （2.55±0.46 vs 3.59±0.37 cm, t = 5.57, P 〈 0.001）. Incidences of metastasis in the liver and lung were lower in 3-wk group than those in positive control group （10% vs 400, and 90% vs 100%, respectively）. The expression intensities of the vascular endothelium growth factor （VEGF） in groups A, B, C and D were 0.10±0.06, 0.66±0.21, 0.28±0.09 and 1.48±0.32, respectively. VEGF expression level in the test group A was significantly lower than that in the negative control group C （t = 5.07; P 〈 0.001）.In addition, VEGF expression in the test group B was significantly lower than that in the positive control group D （t = 6.38; P 〈 0.001）. Scanning with multi-slice CT showed that displaying rate of hepatic artery branches was obviously lower in grade Ⅲ（40%） than that in grade Ⅰ（70%） and Ⅱ（100%） （P 〈 0.05）; but there was no significant difference in displaying rate of the portal vein at various grades. Values of blood flow （BF） of the liver, blood volume （BV）, mean transit time （MTT） and permeability of vascular surface （PS） were lower in the immediate group and 3-wk group than those in control groups, but values of hepatic arterial fraction （HAF） were increased. Significant positive correlations were existed between BF and BV （r = 0.905, P 〈 0.01）, and between BF and PS （r = 0.967, P 〈 0.01）, between BV and PS （r = 0.889, P 〈 0.01）. A significant negative correlation existed between PV and HAF （r = -0.768, P 〈 0.01）, between PS and HAF （r = -0.557, P 〈 0.01）. The values of BF, BV and PS had a positive correlation with VEGF （rBF = 0.842, rBV = 0.579, rPS = 0.811, P 〈 0.01） . However, there was no significant correlation between the values of MTT and HAF and the VEGF expression （rMTt = 0.066, rHAF = -0.027）. CONCLUSION： Ligating the left external branch of portal vein is an ideal way to establish models of portal vein occlusion in rabbits with hepatic VX2 tumor. Multi slice CT plays a key role in evaluating effect of portal vein occlusion.

Comparison of two different laparotomy methods for modeling rabbit VX2 hepatocarcinoma

AIM:To compare two different laparotomy methods for modeling rabbit VX2 hepatocarcinoma.METHODS:Thirty New Zealand rabbits were randomly divided into two groups:A and B.Group A was assigned a traditional laparotomy method(embedding tumor fragments directly into the liver with tweezers).Group B was subjected to an improved laparotomy method(injection of tumor fragments into the liver through a 15 G syringe needle).The operation time, incision length, incision infection rate, and mortality rate were compared between the two groups after laparotomy.Magnetic resonance imaging(MRI) was performed to evaluate tumor formation rates and the characteristics of the tumors 2 wk after laparotomy.RESULTS:The mean operation times for the two groups(Group A vs Group B) were 23.2 ± 3.4 min vs 17.5 ± 2.9 min(P < 0.05); the incision length was 3.3 ± 0.5 cm vs 2.4 ± 0.6 cm(P < 0.05); and the mortality rate after 2 wk was 26.7% vs 0%(P < 0.05); all of these outcomes were significantly different between the two groups.The incision infection rates in the two groups were 6.7% vs 0%(P > 0.05), whichwere not significantly different.MRI performed after 2weeks showed that the tumor formation rates in the two groups were 90.9%vs 93.3%(P>0.05).These rates were not significantly different between the two groups.The celiac implantation rate and abdominal wall metastasis rate in the two groups were 36.4%vs 13.3%(P<0.05)and 27.2%vs 6.7%(P<0.05),respectively,which were significantly different between the two groups.CONCLUSION:The tumor formation rates were not significantly different between the two methods for modeling rabbit VX2 hepatocarcinoma.However,the improved method is recommended because it has certain advantages.

Establishment of Rabbit Liver VX2 Tumor Model Using Percutaneous Puncture Inoculation of Tumor Fragment Guided and Evaluated by Ultrasonography

The aim of the present study is to evaluate a method of establishing model of rabbit liver VX2 tumor using percutaneous puncture inoculation of tumor fragment guided by ultrasonography.VX2 tumor fragments were implanted into the liver of 13 New Zealand white rabbits flushed by 1 mL normal saline through percutaneous puncture needle guided by ultrasonography.Conventional ultrasonography and contrast-enhanced ultrasonography(CEUS)were performed 14 days after inoculation,and then the rabbits were sacrificed and pathologically examined.The success rate of inoculation was 100%.The average size of liver VX2 tumor was 1.7 cm×1.3 cm,CEUS of VX2 liver tumors showed the"rapid wash-in and wash-out"vascular pattern.There were significant differences between VX2 tumors and liver parenchyma in quantitative parameters of A,k and A×k(P<0.05),which meant that VX2 liver tumors were characterized by more blood flow volume and faster blood velocity than liver parenchyma.Tumor fragment flushed by normal saline into the liver through a needle may be a promising method for the induction of a hepatic tumor.And CEUS can be used for accurately assessing angiogenesis and blood perfusion of VX2 tumors.

Adriamycin Thermotherapy through the Hepatic Artery Using VX2 Carcinoma in Rabbit Liver as a Model

OBJECTIVE It has been reported that heating can enhance sensitivity of rabbit VX2 cells to adriamycin and increase the intracellular concentration of adriamycin. This study was designed to evaluate the anti-tumor effect of interventional hyperthermia and interventional thermochemotherapy on VX2 carcinoma in rabbit liver. METHODS VX2 carcinoma cells were surgically implanted into the right liver lobe of 60 male New Zealand white rabbits, which were randomly divided into 4 groups (15 per group). The 4 groups (designated as 1, 2, 3, 4 respectively) were injected with 10 ml of the following via the hepatic artery: physiological saline (37℃); adriamycin (37℃); physiological saline (60℃); adriamycin (60℃). One week later, the tumor volume, serum level of aspartate transaminase (AST) and the survival of the rabbits bearing VX2 were observed and compared among the different treated groups. RESULTS The tumor growth rate in group 4 (ADM 60℃) (0.53±0.21)% was significantly lower than that in group 1 (3.48±1.17)%, in group 2 (1.09±0.26)% and group 3 (3.32±1.28)% (P<0.05, P<0.05, P<0.01, respectively). The days of survival days for group 4 (87.0±2.0) were significantly more than that in group 1 (40.0±3.0). Group 4 showed a significantly higher increase in serum AST compared to group 1 (P<0.05), but without significant differences compared to the other groups (P>0.05). CONCLUSION Adriamycin treatment at 60℃ significantly deceased the tumor growth, prolonged the survival period and resulted in reversible liver damage.

Expression of MMP-2 in residual VX2 liver tumor after transcatheter arterial embolization combined with portal venous embolization in an animal model

Objective:This study aimed to analyze the effects of transcatheter arterial embolization(TAE)combined with portal venous embolization(PVE)on the expression of MMP-2 in residual VX2 liver tumor tissues,liver function and non-embolic lobe regeneration.Methods:A total of 72 rabbits were randomly divided into Sham,TAE,PVE and TAE+PVE groups(n=18/group).The tissue samples from each group were taken at 6 h,3 days and 7 days after interventional operation,respectively.MMP-2 expression was detected by immunohistochemistry,Real-time PCR,and Western-blotting.The main indicators(such as AST,ATL,and TBIL)of liver function and the volume of non-embolized hepatic lobes were measured in each group after operation.One-way ANOVA and Kruskal-wallis method were used for statistical analysis.Results:The expression of MMP-2 mRNA and protein remained the highest in the Sham group,and the expression of MMP-2 mRNA and protein in TAE,PVE and TAE+PVE groups were successively increased,and the expression of MMP-2 in TAE+PVE group was always significantly higher than TAE group.The AST and ALT levels in each group on day 7 after operation showed a significant declination,and all groups have recovered to the preoperative baseline level and TBIL has a slight fluctuation in each group after operation with no statistical difference.On day 7 after operation,the increasing volume of non-embolized liver lobes in TAE+PVE group showed a more significant effect than those in PVE group,but there was no statistical significance(37.62±1.54 ml VS 36.18±1.15 ml,P=0.881),and its volume was significantly higher than those in the sham group(27.03±1.11 ml).Conclusion:TAE+PVE is considered to be an efficient and safe approach for treating rabbit VX2 liver transplantation tumor,but the expression of MMP-2 increased fastest after TAE+PVE,which might promote tumor cell invasion and metastasis.

紫杉醇联合无水乙醇注射治疗兔肝VX2肿瘤的实验研究

目的 探讨超声引导下兔VX2肝肿瘤建模的成功率,以及紫杉醇(PTX)联合无水乙醇注射治疗(AEI)兔VX2肝脏肿瘤的有效性。方法 超声引导下将VX2肿瘤细胞注入兔肝脏内,2周后利用超声造影观察肿瘤生长情况,将建模成功的兔子分为6组:假手术组(注入2 mL生理盐水),临床单纯无水乙醇(AE)治疗(按肿瘤体积确定AE用量,C-AEI组),2 mL,AE联合不同浓度PTX混合液治疗[PTX依次为0 mg(AEI组)、12.5 mg(低剂量PTX组)、25.0 mg(中剂量PTX组)、37.5 mg(高剂量PTX组)]。1周之后行超声造影评估肿瘤坏死率(RNR),处死动物后获取肿瘤组织标本进行HE染色比较组织坏死率(HNR)。结果 超声引导下兔肝VX2肿瘤建模成功并在肝内原位成瘤(成功率100%,36/36)。PTX剂量与RNR呈正相关(R^(2)=0.946,P <0.001),HNR呈相似趋势(R2=0.843,P <0.001)。相关分析显示PTX剂量与肿瘤坏死有显著相关,即随着PTX浓度升高,肿瘤的坏死率亦增高(P <0.001)。结论 PTX联合AEI有助于提高治疗兔VX2肝肿瘤的效果。

Phosphorus limitation on CO_(2)fertilization effect in tropical forests informed by a coupled biogeochemical model

Tropical forests store more than half of the world's terrestrial carbon(C)pool and account for one-third of global net primary productivity(NPP).Many terrestrial biosphere models(TBMs)estimate increased productivity in tropical forests throughout the 21st century due to CO_(2)fertilization.However,phosphorus(P)liaitations on vegetation photosynthesis and productivity could significantly reduce the CO_(2)fertilization effect.Here,we used a carbon-nitrogen-phosphorus coupled model(Dynamic Land Ecosystem Model;DLEM-CNP)with heterogeneous maximum carboxylation rates to examine how P limitation has affected C fluxes in tropical forests during1860-2018.Our model results showed that the inclusion of the P processes enhanced model performance in simulating ecosystem productivity.We further compared the simulations from DLEM-CNP,DLEM-CN,and DLEMC and the results showed that the inclusion of P processes reduced the CO_(2)fertilization effect on gross primary production(GPP)by 25%and 45%,and net ecosystem production(NEP)by 28%and 41%,respectively,relative to CN-only and C-on ly models.From the 1860s to the 2010s,the DLEM-CNP estimated that in tropical forests GPP increased by 17%,plant respiration(Ra)increased by 18%,ecosystem respiration(Rh)increased by 13%,NEP increased by 121%per unit area,respectively.Additionally,factorial experiments with DLEM-CNP showed that the enhanced NPP benefiting from the CO_(2) fertilization effect had been offset by 135%due to deforestation from the 1860s to the 2010s.Our study highlights the importance of P limitation on the C cycle and the weakened CO_(2)fertilization effect resulting from P limitation in tropical forests.

离体低温储存瘤块构建VX2肝癌模型效果研究

目的比较观察新鲜瘤块及不同时间低温冻存VX2肝癌瘤块经复苏后构建兔肝癌模型的效果。方法选取鱼肉状新鲜VX2瘤块,剔除周边坏死组织和肌肉后,-80℃下冰冻3、5和7个月。20只新西兰大白兔随机分为4组,A组予新鲜瘤块肝脏原位种植法构建VX2兔肝癌模型;B、C、D组分别给予-80℃冰冻3、5和7个月的瘤块,复苏后采用肝脏原位种植法构建兔肝癌模型。14 d后观察各组瘤兔肝脏的成瘤效果。通过免疫荧光观察肿瘤的增殖、凋亡及新生血管。结果A、B、C、D 4组的成瘤率为100%,但随着冻存时间的延长,5个月以后的瘤块活性差异性变大,肝脏肿瘤中心坏死面积增加。组织学检查发现,A、B两组模型TUNEL、Ki67、HIF1-α、VEGF、CD31表达无明显差异,而A、B组与C、D组相比,TUNEL、Ki67、HIF1-α、VEGF、CD31表达差异显著。结论-80℃下离体低温储存瘤块构建的兔VX2肝癌模型7个月内均可成瘤,5个月后瘤块间活性差异性变大,但整体来看可较好地保存瘤株活性,节省人力物力。

Immunobiology of COVID-19: Mechanistic and therapeutic insights from animal models

The distribution of the immune system throughout the body complicates in vitro assessments of coronavirus disease 2019(COVID-19)immunobiology,often resulting in a lack of reproducibility when extrapolated to the whole organism.Consequently,developing animal models is imperative for a comprehensive understanding of the pathology and immunology of severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)infection.This review summarizes current progress related to COVID-19 animal models,including non-human primates(NHPs),mice,and hamsters,with a focus on their roles in exploring the mechanisms of immunopathology,immune protection,and long-term effects of SARS-CoV-2 infection,as well as their application in immunoprevention and immunotherapy of SARS-CoV-2 infection.Differences among these animal models and their specific applications are also highlighted,as no single model can fully encapsulate all aspects of COVID-19.To effectively address the challenges posed by COVID-19,it is essential to select appropriate animal models that can accurately replicate both fatal and non-fatal infections with varying courses and severities.Optimizing animal model libraries and associated research tools is key to resolving the global COVID-19 pandemic,serving as a robust resource for future emerging infectious diseases.

Comparison of immune responses and intestinal flora in epicutaneously sensitized BALB/c or C57BL/6 mouse models of food allergy

Cutaneous exposure to food allergens through a disrupted skin barrier is recognized as an important cause of food allergy,and the cutaneous sensitized mouse model has been established to investigate relevant allergic disorders.However,the role of different genetic backgrounds of mice on immune responses to food allergens upon epicutaneous sensitization is largely unknown.In this study,two strains of mice,i.e.,the BALB/c and C57BL/6 mice,were epicutaneously sensitized with ovalbumin on atopic dermatitis(AD)-like skin lesions,followed by intragastric challenge to induce IgE-mediated food allergy.Allergic outcomes were measured as clinical signs,specific antibodies and cytokines,and immune cell subpopulations,as well as changes in intestinal barrier function and gut microbiota.Results showed that both strains of mice exhibited typical food-allergic symptoms with a Th2-skewed response.The C57BL/6 mice,rather than the BALB/c mice,were fitter for establishing an epicutaneously sensitized model of food allergy since a stronger Th2-biased response and severer disruptions in the intestinal barrier and gut homeostasis were observed.This study provides knowledge for selecting an appropriate mouse model to study food-allergic responses associated with AD-like skin lesions and highlights the role of genetic variations in the immune mechanism underlying pathogenesis of food allergy.

Performance validation of High Mountain Asia 8-meter Digital Elevation Model using ICESat-2 geolocated photons

High Mountain Asia(HMA),recognized as a third pole,needs regular and intense studies as it is susceptible to climate change.An accurate and high-resolution Digital Elevation Model(DEM)for this region enables us to analyze it in a 3D environment and understand its intricate role as the Water Tower of Asia.The science teams of NASA realized an 8-m DEM using satellite stereo imagery for HMA,termed HMA 8-m DEM.In this research,we assessed the vertical accuracy of HMA 8-m DEM using reference elevations from ICESat-2 geolocated photons at three test sites of varied topography and land covers.Inferences were made from statistical quantifiers and elevation profiles.For the world’s highest mountain,Mount Everest,and its surroundings,Root Mean Squared Error(RMSE)and Mean Absolute Error(MAE)resulted in 1.94 m and 1.66 m,respectively;however,a uniform positive bias observed in the elevation profiles indicates the seasonal snow cover change will dent the accurate estimation of the elevation in this sort of test sites.The second test site containing gentle slopes with forest patches has exhibited the Digital Surface Model(DSM)features with RMSE and MAE of 0.58 m and 0.52 m,respectively.The third test site,situated in the Zanda County of the Qinghai-Tibet,is a relatively flat terrain bed,mostly bare earth with sudden river cuts,and has minimal errors with RMSE and MAE of 0.32 m and 0.29 m,respectively,and with a negligible bias.Additionally,in one more test site,the feasibility of detecting the glacial lakes was tested,which resulted in exhibiting a flat surface over the surface of the lakes,indicating the potential of HMA 8-m DEM for deriving the hydrological parameters.The results accrued in this investigation confirm that the HMA 8-m DEM has the best vertical accuracy and should be of high use for analyzing natural hazards and monitoring glacier surfaces.

A multi-mechanism numerical simulation model for CO_(2)-EOR and storage in fractured shale oil reservoirs

Under the policy background and advocacy of carbon capture,utilization,and storage(CCUS),CO_(2)-EOR has become a promising direction in the shale oil reservoir industry.The multi-scale pore structure distribution and fracture structure lead to complex multiphase flow,comprehensively considering multiple mechanisms is crucial for development and CO_(2) storage in fractured shale reservoirs.In this paper,a multi-mechanism coupled model is developed by MATLAB.Compared to the traditional Eclipse300 and MATLAB Reservoir Simulation Toolbox(MRST),this model considers the impact of pore structure on fluid phase behavior by the modified Peng—Robinson equation of state(PR-EOS),and the effect simultaneously radiate to Maxwell—Stefan(M—S)diffusion,stress sensitivity,the nano-confinement(NC)effect.Moreover,a modified embedded discrete fracture model(EDFM)is used to model the complex fractures,which optimizes connection types and half-transmissibility calculation approaches between non-neighboring connections(NNCs).The full implicit equation adopts the finite volume method(FVM)and Newton—Raphson iteration for discretization and solution.The model verification with the Eclipse300 and MRST is satisfactory.The results show that the interaction between the mechanisms significantly affects the production performance and storage characteristics.The effect of molecular diffusion may be overestimated in oil-dominated(liquid-dominated)shale reservoirs.The well spacing and injection gas rate are the most crucial factors affecting the production by sensitivity analysis.Moreover,the potential gas invasion risk is mentioned.This model provides a reliable theoretical basis for CO_(2)-EOR and sequestration in shale oil reservoirs.

3D seismic forward modeling from the multiphysical inversion at the Ketzin CO_(2) storage site

From June 2008 to August 2013,approximately 67 kt of CO_(2) was injected into a deep saline formation at the Ketzin pilot CO_(2) storage site.During injection,3D seismic surveys have been performed to monitor the migration of sequestered CO_(2).Seismic monitoring results are limited by the acquisition and signal-to-noise ratio of the acquired data.The multiphysical reservoir simulation provides information regarding the CO_(2) fluid behavior,and the approximated model should be calibrated with the monitoring results.In this work,property models are delivered from the multiphysical model during 3D repeated seismic surveys.The simulated seismic data based on the models are compared with the real data,and the results validate the effectiveness of the multiphysical inversion method.Time-lapse analysis shows the trend of CO_(2) migration during and after injection.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Numerical modeling of blast-induced rock fragmentation in deep mining with 3D and 2D FEM method approaches

To optimize the excavation of rock using underground blasting techniques,a reliable and simplified approach for modeling rock fragmentation is desired.This paper presents a multistep experimentalnumerical methodology for simplifying the three-dimensional(3D)to two-dimensional(2D)quasiplane-strain problem and reducing computational costs by more than 100-fold.First,in situ tests were conducted involving single-hole and free-face blasting of a dolomite rock mass in a 1050-m-deep mine.The results were validated by laser scanning.The craters were then compared with four analytical models to calculate the radius of the crushing zone.Next,a full 3D model for single-hole blasting was prepared and validated by simulating the crack length and the radius of the crushing zone.Based on the stable crack propagation zones observed in the 3D model and experiments,a 2D model was prepared.The properties of the high explosive(HE)were slightly reduced to match the shape and number of radial cracks and crushing zone radius between the 3D and 2D models.The final methodology was used to reproduce various cut-hole blasting scenarios and observe the effects of residual cracks in the rock mass on further fragmentation.The presence of preexisting cracks was found to be crucial for fragmentation,particularly when the borehole was situated near a free rock face.Finally,an optimization study was performed to determine the possibility of losing rock continuity at different positions within the well in relation to the free rock face.

Delayed treatment of diabetic foot ulcer in patients with type 2 diabetes and its prediction model

BACKGROUND Diabetic foot(DF)is a serious complication of type 2 diabetes.This study aimed to investigate the factors associated with DF occurrence and the role of delayed medical care in a cohort of patients with type 2 diabetes.AIM To reveal the impact of delayed medical treatment on the development of DF in patients with type 2 diabetes and to establish a predictive model for DF.METHODS In this retrospective cohort study,292 patients with type 2 diabetes who underwent examination at our hospital from January 2023 to December 2023 were selected and divided into the DF group(n=82,DF)and nondiabetic foot group(n=210,NDF).Differential and correlation analyses of demographic indicators,laboratory parameters,and delayed medical treatment were conducted for the two groups.Logistic regression was applied to determine influencing factors.Receiver operating characteristic(ROC)analysis was performed,and indicators with good predictive value were selected to establish a combined predictive model.RESULTS The DF group had significantly higher body mass index(BMI)(P<0.001),disease duration(P=0.012),plasma glucose levels(P<0.001),and HbA1c(P<0.001)than the NDF group.The NDF group had significantly higher Acute Thrombosis and Myocardial Infarction Health Service System(ATMHSS)scores(P<0.001)and a significantly lower delayed medical treatment rate(72.38%vs 13.41%,P<0.001).BMI,duration of diabetes,plasma glucose levels,HbA1c,diabetic peripheral neuropathy,and nephropathy were all positively correlated with DF occurrence.ATMHSS scores were negatively correlated with delayed time to seek medical treatment.The logistic regression model revealed that BMI,duration of diabetes,plasma glucose levels,HbA1c,presence of diabetic peripheral neuropathy and nephropathy,ATMHSS scores,and delayed time to seek medical treatment were influencing factors for DF.ROC analysis indicated that plasma glucose levels,HbA1c,and delayed medical treatment had good predictive value with an area under the curve of 0.933 for the combined predictive model.CONCLUSION Delayed medical treatment significantly affects the probability of DF occurrence in patients with diabetes.Plasma glucose levels,HbA1c levels,and the combined predictive model of delayed medical treatment demonstrate good predictive value.

Study of the Effect of High-Voltage Low-Frequency Electrotherapy on Type 2 Diabetes in an in Vivo Model

The study investigates the impact of high-voltage low-frequency electrotherapy on glucose levels and hematological parameters in an in vivo model of type 2 diabetes. The results demonstrate a significant reduction in glucose increases during glucose tolerance tests (GTT) and suggest potential mechanisms, including improved insulin sensitivity and reduced inflammation. Hematological analysis indicates no adverse effects of electrotherapy on healthy or diabetic mice. This study supports the potential of high-voltage low-frequency electrotherapy as an adjunctive treatment for type 2 diabetes, warranting further research into its mechanisms and long-term effects.