Force Control Compensation Method with Variable Load Stiffness and Damping of the Hydraulic Drive Unit Force Control System

Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit（HDU）, and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force control inevitably. In the recent years, although many scholars researched some control methods such as disturbance rejection control, parameter self-adaptive control, impedance control and so on, to improve the force control performance of HDU, the robustness of the force control still needs improving. Therefore, how to simulate the complex and variable load characteristics of the environment structure and how to ensure HDU having excellent force control performance with the complex and variable load characteristics are key issues to be solved in this paper. The force control system mathematic model of HDU is established by the mechanism modeling method, and the theoretical models of a novel force control compensation method and a load characteristics simulation method under different environment structures are derived, considering the dynamic characteristics of the load stiffness and the load damping under different environment structures. Then, simulation effects of the variable load stiffness and load damping under the step and sinusoidal load force are analyzed experimentally on the HDU force control performance test platform, which provides the foundation for the force control compensation experiment research. In addition, the optimized PID control parameters are designed to make the HDU have better force control performance with suitable load stiffness and load damping, under which the force control compensation method is introduced, and the robustness of the force control system with several constant load characteristics and the variable load characteristics respectively are comparatively analyzed by experiment. The research results indicate that if the load characteristics are known, the force control compensation method presented in this paper has positive compensation effects on the load characteristics variation, i.e., this method decreases the effects of the load characteristics variation on the force control performance and enhances the force control system robustness with the constant PID parameters, thereby, the online PID parameters tuning control method which is complex needs not be adopted. All the above research provides theoretical and experimental foundation for the force control method of the quadruped robot joints with high robustness.

Improved estimation of rotor position for sensorless control of a PMSM based on a sliding mode observer

This work proposes a new strategy to improve the rotor position estimation of a permanent magnet synchronous motor(PMSM) over wide speed range. Rotor position estimation of a PMSM is performed by using sliding mode observer(SMO). An adaptive observer gain was designed based on Lyapunov function and applied to solve the chattering problem caused by the discontinuous function of the SMO in the wide speed range. The cascade low-pass filter(LPF) with variable cut-off frequency was proposed to reduce the chattering problem and to attenuate the filtering capability of the SMO. In addition, the phase shift caused by the filter was counterbalanced by applying the variable phase delay compensation for the whole speed area. High accuracy estimation result of the rotor position was obtained in the experiment by applying the proposed estimation strategy.

Adaptive estimation and nonlinear variable gain compensation of the contouring error for precise parametric curve following

Contour following is one of the most important issues faced by many computer-numerical-control(CNC) machine tools to achieve high machining precision. This paper presents a new real-time error compensation method aiming at reducing the contouring error caused by facts such as servo lag and dynamics mismatch in parametric curved contour-following tasks. Due to the lack of high-precision contouring-error estimation method for free-form parametric curved toolpath, the error can hardly be compensated effectively. Therefore, an adaptive accurate contouring-error estimation algorithm is proposed first, where a tangential-error backstepping method based on Taylor's expansion is developed to rapidly find the closest point on the parametric curve to the actual motion position. On this foundation, the contouring error is compensated using a proposed nonlinear variable-gain compensation method, where the compensation gain is obtained according to not only the contouring-error magnitude but also its direction variation. The stability of the system after compensation is analyzed afterwards according to the Jury stability criterion.By design of the compensator in accordance with the presented contouring-error compensation method as well as the stability analyzation result, the balance between the response speed and the contour control stability can be effectively made. Experimental tests demonstrate the feasibility of the presented methods in both contouring-error estimation and contour-accuracy improvement.Contributions of this research are significant for enhancing the contour-following performance of the CNC machine tools.