Speed Sensorless Vector Control of Induction Motor Based on Reduced Order Extended Kalman Filter

A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator （SJA） is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either ＂push＂ or ＂pull＂, one novel synthetic jet actuator can fulfill both ＂push＂ and ＂pull＂ functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.

Genetic algorithm tuned PI controller on PMSM simplified vector control

A simple control structure in servo system is occasionally needed for simple industrial application which precise and high control performance is not exessively important so that the cost production can be reduced efficiently. Simplified vector control, which has simple control structure, is utilized as the permanent magnet synchronous motor control algorithm and genetic algorithm is used to tune three PI controllers used in simplified vector control. The control performance is obtained from simulation and investigated to verify the feasibility of the algorithm to be applied in the real application. Simulation results show that the speed and torque responses of the system in both continuous time and discrete time can achieve good performances. Furthermore, simplified vector control combined with genetic algorithm has a similar perfofmance with conventional field oriented control algorithm and possible to be realized into the real simple application in the future.

High Speed SRM Using Vector Control for Electric Vehicle

The high speed motor is effective to realize downsizing motor in an electric vehicle(EV).Switched Reluctance Motor(SRM)is possible to the high speed drive because the rotor structure has simple and robust.However,the vibration and the acoustic noise are large from the drive principle.Moreover,the conventional complicated current excitation results in the difficulty of the torque controller design.To overcome these problems,the vector control has been proposed for SRM drive.However,the vector control has not been applied to the SRM in the high speed drive.In this paper,the drive conditions such as switching frequency,bus voltage for driving the SRM in the high speed region are clarified.It is shown that the proposed SRM can be driven by the vector control in the high speed region and can realize low vibration.

Novel Control Vector Parameterization Method with Differential Evolution Algorithm and Its Application in Dynamic Optimization of Chemical Processes

Two general approaches are adopted in solving dynamic optimization problems in chemical processes, namely, the analytical and numerical methods. The numerical method, which is based on heuristic algorithms, has been widely used. An approach that combines differential evolution （DE） algorithm and control vector parameteri- zation （CVP） is proposed in this paper. In the proposed CVP, control variables are approximated with polynomials based on state variables and time in the entire time interval. Region reduction strategy is used in DE to reduce the width of the search region, which improves the computing efficiency. The results of the case studies demonstrate the feasibility and efficiency of the oroposed methods.

NOVEL SENSORLESS VECTOR CONTROL SYSTEM OF INDUCTION MACHINE BASED ON FLUX OBSERVER IN FIELD WEAKENING

A speed-sensorless vector control system for induction machines （IMs）is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated through the method of q-axis rotor flux converging on zero with proportional integral regulator, A 0.75 kW,50 Hz,two-pole induction machine was used in the simulation and experimental verification, The simulation model was constructed in Matlab. A series of tests were performed in the field weakening region, for both no-load and loaded operation. The estimated speed tracks the actual speed well in the based speed region and field weakening region （ 1 per unit value to 4 per unit value）. The small estimation error of residual speed is due to the existence of slip.

Indirect Vector Control of Linear Induction Motors Using Space Vector Pulse Width Modulation

Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.

An Improved Control Vector Iteration Approach for Nonlinear Dynamic Optimization. II. Problems with Path Constraints

This paper considers dealing with path constraints in the framework of the improved control vector iteration （CVI） approach. Two available ways for enforcing equality path constraints are presented, which can be directly incorporated into the improved CVI approach. Inequality path constraints are much more difficult to deal with, even for small scale problems, because the time intervals where the inequality path constraints are active are unknown in advance. To overcome the challenge, the ll penalty function and a novel smoothing technique are in-troduced, leading to a new effective approach. Moreover, on the basis of the relevant theorems, a numerical algo-rithm is proposed for nonlinear dynamic optimization problems with inequality path constraints. Results obtained from the classic batch reaCtor operation problem are in agreement with the literature reoorts, and the comoutational efficiency is also high.

Sensorless Vector Control of Parallel-Connected Multiple Induction Motors Fed by a Single Inverter

A method of improving the stability of multiple-motor drive system fed by a 3-leg single inverter has been devised that employs the averages and differences of estimated parameters for field-oriented control. The parameters of each motor (stator current, rotor flux, and speed) are estimated using adaptive rotor flux observers to achieve sensorless control. The validity and effective of the proposed method have been demonstrated through simulations and experiments.

Nonlinear model predictive control based on support vector machine and genetic algorithm

This paper presents a nonlinear model predictive control(NMPC) approach based on support vector machine(SVM) and genetic algorithm(GA) for multiple-input multiple-output(MIMO) nonlinear systems.Individual SVM is used to approximate each output of the controlled plant Then the model is used in MPC control scheme to predict the outputs of the controlled plant.The optimal control sequence is calculated using GA with elite preserve strategy.Simulation results of a typical MIMO nonlinear system show that this method has a good ability of set points tracking and disturbance rejection.

Temperature prediction control based on least squares support vector machines

A prediction control algorithm is presented based on least squares support vector machines (LS-SVM) model for a class of complex systems with strong nonlinearity. The nonlinear off-line model of the controlled plant is built by LS-SVM with radial basis function (RBF) kernel. In the process of system running, the off-line model is linearized at each sampling instant, and the generalized prediction control (GPC) algorithm is employed to implement the prediction control for the controlled plant. The obtained algorithm is applied to a boiler temperature control system with complicated nonlinearity and large time delay. The results of the experiment verify the effectiveness and merit of the algorithm.

Compensation of Dead-Time Effect of Speed Sensorless Vector Control System

The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.

Design and Development of a Vector Control System of Induction Motor Based on Dual CPU for Electric Vehicle

A vector control system for electric vehicle (EV) induction motor drive system is designed and developed. Its hardware system based on dual CPU(microcomputer 80C196KC and DSP TMS320F2407) is implemented. The fundamental mathematics equations of induction motor in the general synchronously rotating reference frame ( M T frame) used for vector control are achieved by coordinate transformation. Rotor flux equation and torque equation are deduced. According to these equations, an induction motor mathematical model and rotor flux observer model are built separately. The rotor flux field oriented vector control method is implemented based on these models in system software, some of the simulation results with Matab/Simulink are given. The simulation results show that the vector control system for EV induction motor drive system has better static and dynamic performance, and the rotor flux field oriented vector control method was practically verified.

Mosquito vector management with botanicals-the most effective weapons in controlling mosquito-borne diseases

Dear editor,Mosquito-borne diseases,viz.,malaria,filariasis,dengue hemorrhagic fever,chikungunya,Japanese encephalitis etc.,created huge impact on humans over the world,and the chemical insecticides remain the mainstay of effective control.But,indiscriminate and rampant use of the chemical insecticides in controlling mosquito vectors,in order to prevent diseases vectored by them,has resulted problems related to the adverse environmental effects for their(insecticides)potential toxicity,high operational cost,community acceptance,and the development of insecticide resistance among the vectors.The factors mentioned above prompted the search for new means of control strategies.Currently,the botanicals(viz.,plant extracts,essential oils and phytochemicals)with mosquitocidal potential

A novel excitation controller using support vector machines and approximate models

This paper proposes a novel excitation controller using support vector machines （SVM） and approximate models. The nonlinear control law is derived directly based on an input-output approximation method via Taylor expansion, which not only avoids complex control development and intensive computation, but also avoids online learning or adjustment. Only a general SVM modelling technique is involved in both model identification and controller implementation. The robustness of the stability is rigorously established using the Lyapunov method. Several simulations demonstrate the effectiveness of the proposed excitation controller.

Modified sensorless vector control system of IM based on flux observer

This paper presents a speed sensorless vector control system for induction machine (IM),which is based on a flux observer. According to vector control theory of IM,the q-axis rotor flux converging on zero is utilized for speed estimation. Additionally this system solved the online identification of stator resistance by d-axis flux error. The advantages of the proposed system are simplicity and avoidance of the problems caused by only using a voltage model. The effectiveness of the proposed system has been verified by simulation and experimentation.

Research on vector control system of induction motor for electric vehicle

In order to improve the effect of the induction motor controller of the electric vehicle and meet the special requirements of the electric vehicle,an improved method-vector control method is put forward.By analyzing the traditional vector control method,a model of induction motor is established considering stator iron loss and rotor iron loss.This model contains physical model and mathematical model.Mathematical model is set up based on the special requirements of electric vehicles on the induction motor,that is,the induction motor must have a wide speed range and fast torque response.Then,through the extraction of the formula,the dynamic compensation proposal and static compensation proposal can be got.Ultimately,the simulation analysis testifies the effectiveness of the method.

An Improved Control Vector Iteration Approach for Nonlinear Dynamic Optimization (Ⅰ) Problems Without Path Constraints

This study proposes an efficient indirect approach for general nonlinear dynamic optimization problems without path constraints. The approach incorporates the virtues both from indirect and direct methods: it solves the optimality conditions like the traditional indirect methods do, but uses a discretization technique inspired from direct methods. Compared with other indirect approaches, the proposed approach has two main advantages: (1) the discretized optimization problem only employs unconstrained nonlinear programming (NLP) algorithms such as BFGS (Broyden-Fletcher-Goldfarb-Shanno), rather than constrained NLP algorithms, therefore the computational efficiency is increased; (2) the relationship between the number of the discretized time intervals and the integration error of the four-step Adams predictor-corrector algorithm is established, thus the minimal number of time intervals that under desired integration tolerance can be estimated. The classic batch reactor problem is tested and compared in detail with literature reports, and the results reveal the effectiveness of the proposed approach. Dealing with path constraints requires extra techniques, and will be studied in the second paper.

SF VECTOR CONTROL SYSTEM WITH TWO SINGLE CHIP MICROPROCESSORS

This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.

Human Habitats and Malaria Vector Control in Benin: Current Situation and Implications for Effective Control

Long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS) are the main indoor malaria vector tools control tools. The study examined housing characteristics and investigated the relationship between the total volume of household possessions, the volume of the sleeping room, and the hanging of LLINs. A total of 831 bedrooms were randomly selected in Benin in 2015. The findings showed that mud walls were predominant in rural areas (more than 75%), while metal roofs were common (77.3% - 97.9%). Battery-powered lighting was prevalent in rural areas in Northern (97%), while open-flame oil lamps were commonly used in rural areas in Southern (86%). The availability of correct bedding was low, ranging from 1% to 10% in all households. 20% of the bedrooms had at least 50% of their volume occupied by household possessions in urban areas. In rural areas, bedrooms without LLINs had a lower mean rate ratio of the volume occupied by possessions per the total volume of the room compared to bedrooms with at least one LLIN installed (p < 0.0001). The characteristics of human habitats are not favourable to the correct use of vector control intervention indoors. It is therefore important to improve people’s living conditions as the next step for malaria elimination.