Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.T...Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.展开更多
Long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS) are the main indoor malaria vector tools control tools. The study examined housing characteristics and investigated the relationship bet...Long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS) are the main indoor malaria vector tools control tools. The study examined housing characteristics and investigated the relationship between the total volume of household possessions, the volume of the sleeping room, and the hanging of LLINs. A total of 831 bedrooms were randomly selected in Benin in 2015. The findings showed that mud walls were predominant in rural areas (more than 75%), while metal roofs were common (77.3% - 97.9%). Battery-powered lighting was prevalent in rural areas in Northern (97%), while open-flame oil lamps were commonly used in rural areas in Southern (86%). The availability of correct bedding was low, ranging from 1% to 10% in all households. 20% of the bedrooms had at least 50% of their volume occupied by household possessions in urban areas. In rural areas, bedrooms without LLINs had a lower mean rate ratio of the volume occupied by possessions per the total volume of the room compared to bedrooms with at least one LLIN installed (p < 0.0001). The characteristics of human habitats are not favourable to the correct use of vector control intervention indoors. It is therefore important to improve people’s living conditions as the next step for malaria elimination.展开更多
The anarchic urbanization of certain African cities favors the multiplication of the malaria parasite. Thus, the urgent mobilization of African cities is essential to combat this health risk. It is, therefore, with th...The anarchic urbanization of certain African cities favors the multiplication of the malaria parasite. Thus, the urgent mobilization of African cities is essential to combat this health risk. It is, therefore, with the objective of contributing to the investigation of problem areas that the present study evaluates malaria transmission and vector control strategies in the Cotonou V health zone in particular. This is a cross-sectional study taking into account four neighborhoods, including Wologuèdè, Sainte Rita, Gbèdjromèdé and the area around Etoile Rouge. Two nocturnal captures on voluntary humans and the method of spray were carried out in the dry season from December 2021 to February 2022. On the captured Anopheles, the ELISA Circum-Sporozoite Protein test was performed to determine the infectivity and calculate some transmission parameters. Finally, we conducted a survey using the second stage sampling method with one step to ask selected households about their knowledge of vector control methods, their use and the physical integrity of LLINs. We collected 2386 culicidae of which the majority was Culex quinquefasciatus. After the ELISA test, the 29 Anopheles tested, showed no infectivity, i.e. an EIR of 0 pi/h/n. In addition, 99% of the populations in the Cotonou V area use LLINs to protect themselves. However, coils, door and window screens, aerosol sprays, skin and household repellents, and periodic indoor spraying were used. Finally, the majority of nets observed had T1 tears, but there were also T2, T3 and T4 nets (P-value = 0.0). This study confirms that malaria transmission during the dry season in the Cotonou V health zone is almost negligible but not non-existent. Also, populations are exposed to the nuisance of Culex quinquefasciatus mosquitoes continuously throughout the year.展开更多
A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are sele...A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.展开更多
[Objective] Sheep contagious ecthyma virus B2L gene recombinant adenovirus was built by adenovirus vector system.[Method] Genome DNA extracted from sheep contagious ecthyma virus strain JLSY04 as a template,Gene fragm...[Objective] Sheep contagious ecthyma virus B2L gene recombinant adenovirus was built by adenovirus vector system.[Method] Genome DNA extracted from sheep contagious ecthyma virus strain JLSY04 as a template,Gene fragments obtained from B2L by PCR amplification;B2L gene cloning was cloned into PDNR-CMD vector,screening positive clones and plasmid CTC572-6 was obtained;CTC572-6 plasmid for homologous was recombined with the adenoviral vector.Screening positive clones and bacilli PCR,digestion and sequencing and so on were identified.[Result] After identified by enzyme digestion and gene sequencing,recombinant adenovirus vector CTC572Ade-30 of carrying sheep contagious ecthyma virus B2L gene was constructed successfully.[Conclusion] Which laid the foundation for sheep contagious ecthyma genetically engineered vaccine.展开更多
A simple control structure in servo system is occasionally needed for simple industrial application which precise and high control performance is not exessively important so that the cost production can be reduced eff...A simple control structure in servo system is occasionally needed for simple industrial application which precise and high control performance is not exessively important so that the cost production can be reduced efficiently. Simplified vector control, which has simple control structure, is utilized as the permanent magnet synchronous motor control algorithm and genetic algorithm is used to tune three PI controllers used in simplified vector control. The control performance is obtained from simulation and investigated to verify the feasibility of the algorithm to be applied in the real application. Simulation results show that the speed and torque responses of the system in both continuous time and discrete time can achieve good performances. Furthermore, simplified vector control combined with genetic algorithm has a similar perfofmance with conventional field oriented control algorithm and possible to be realized into the real simple application in the future.展开更多
Objective: To construct recombinant retroviral vector containing HIV-1 Tatgene and evaluate the junction of the expressed Tat in target cells. Methods: HIV-1 Tat_(101) genewas recovered from pEV plasmid by Hind Ⅲ dig...Objective: To construct recombinant retroviral vector containing HIV-1 Tatgene and evaluate the junction of the expressed Tat in target cells. Methods: HIV-1 Tat_(101) genewas recovered from pEV plasmid by Hind Ⅲ digestion and cloned into expression plasmid LZESpBMN-Z toconstruct recombinant retroviral expression plasmid named LZRS-Tat_(101). Using the method ofcalcium phosphate, the construct of LZRS-Tat_(101) was then transfected into packaging cell linesPhoenix (ΦNX) which contained env and gal genes encoding structural proteins and pol gene codingfor 3 enzymes ( reverse transcriptase, protease and integrate) essential for retroviral integrationand replication . The stable transfected cell lines was obtained using puromycin to screen for morethan 3 days. Then, immunohistochemical (IHC ) staining was carried out to detect the expressionlevel of Tat_(101) protein in both transiently and stably trancfected ΦNX, respectively. Thesupematants containing recombinant virus collected from transient and stable transfected cells wereemployed to infect 293 cells, respectively, and the expressed Tat in 293 cells was tested by Westernblot. Meantime, the supematants of infected 293 cells was further added to HL3T1 cells which wereHela cell lines containing an HIV-1-LTR/CAT reporter construct to establish a co-culture system.After co-culture for 72 hours, the protein was extracted from HL3T1 cells and used for CAT activityassay. Results: After LZRS- Tat_(101) was transfected into ΦNX, the amount of expressed Tat intransient transfection cells was significantly higher than that in stable transfection cells; Tatcould be detected not only in 293 cells but also in the supematants from 293 cells culture, and Tatin the supematants could activate HIV-1 LTR promoter in HL3T1, resulting in high 'expression of CATlocated at the downstream of LTR. Conclusion: The construct of recombinant retrovirus LZRS-Tat_(101) could express Tat protein in target cells and the expressed Tat was functionally activeand can really exhibit the ability to activate transcription.展开更多
The high speed motor is effective to realize downsizing motor in an electric vehicle(EV).Switched Reluctance Motor(SRM)is possible to the high speed drive because the rotor structure has simple and robust.However,the ...The high speed motor is effective to realize downsizing motor in an electric vehicle(EV).Switched Reluctance Motor(SRM)is possible to the high speed drive because the rotor structure has simple and robust.However,the vibration and the acoustic noise are large from the drive principle.Moreover,the conventional complicated current excitation results in the difficulty of the torque controller design.To overcome these problems,the vector control has been proposed for SRM drive.However,the vector control has not been applied to the SRM in the high speed drive.In this paper,the drive conditions such as switching frequency,bus voltage for driving the SRM in the high speed region are clarified.It is shown that the proposed SRM can be driven by the vector control in the high speed region and can realize low vibration.展开更多
Given the sequence of Chs gene promoter from Arabidopsis thaliana reported in GenBank (AF248988), a pair of specific PCR primers was designed with the Primer Premier 5.0 software. PCR products of about 0.5 kb were s...Given the sequence of Chs gene promoter from Arabidopsis thaliana reported in GenBank (AF248988), a pair of specific PCR primers was designed with the Primer Premier 5.0 software. PCR products of about 0.5 kb were successfully amplified with the genome DNA of A. thaliana as a DNA template and Taq polymerase as DNA polymerase. The purified PCR products were ligated to the pMD18-T vector. The sequencing result showed that the Chs promoter from A. thaliana was 531 bp long. Sequence alignment analysis based on the DNAMAN software revealed that the sequence similarity between the cloned promoter and target promoter (AF248988) was up to 100%. Online PLACE analysis indicated that the Chs promoter contained cis-elements such as TATA-box, CAAT-box, pollen-box, G-box, ACGT-containing element, R response element, Myb recognition element and TACPyAT-box. At the same time, a plant expression vectorpAtChs::GUS which fused the Chs promoter and the marker gene GUS was successfully constructed.展开更多
A speed-sensorless vector control system for induction machines (IMs)is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated throu...A speed-sensorless vector control system for induction machines (IMs)is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated through the method of q-axis rotor flux converging on zero with proportional integral regulator, A 0.75 kW,50 Hz,two-pole induction machine was used in the simulation and experimental verification, The simulation model was constructed in Matlab. A series of tests were performed in the field weakening region, for both no-load and loaded operation. The estimated speed tracks the actual speed well in the based speed region and field weakening region ( 1 per unit value to 4 per unit value). The small estimation error of residual speed is due to the existence of slip.展开更多
The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors duri...The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.展开更多
A vector control system for electric vehicle (EV) induction motor drive system is designed and developed. Its hardware system based on dual CPU(microcomputer 80C196KC and DSP TMS320F2407) is implemented. The fundament...A vector control system for electric vehicle (EV) induction motor drive system is designed and developed. Its hardware system based on dual CPU(microcomputer 80C196KC and DSP TMS320F2407) is implemented. The fundamental mathematics equations of induction motor in the general synchronously rotating reference frame ( M T frame) used for vector control are achieved by coordinate transformation. Rotor flux equation and torque equation are deduced. According to these equations, an induction motor mathematical model and rotor flux observer model are built separately. The rotor flux field oriented vector control method is implemented based on these models in system software, some of the simulation results with Matab/Simulink are given. The simulation results show that the vector control system for EV induction motor drive system has better static and dynamic performance, and the rotor flux field oriented vector control method was practically verified.展开更多
This paper presents a speed sensorless vector control system for induction machine (IM),which is based on a flux observer. According to vector control theory of IM,the q-axis rotor flux converging on zero is utilized ...This paper presents a speed sensorless vector control system for induction machine (IM),which is based on a flux observer. According to vector control theory of IM,the q-axis rotor flux converging on zero is utilized for speed estimation. Additionally this system solved the online identification of stator resistance by d-axis flux error. The advantages of the proposed system are simplicity and avoidance of the problems caused by only using a voltage model. The effectiveness of the proposed system has been verified by simulation and experimentation.展开更多
In order to improve the effect of the induction motor controller of the electric vehicle and meet the special requirements of the electric vehicle,an improved method-vector control method is put forward.By analyzing t...In order to improve the effect of the induction motor controller of the electric vehicle and meet the special requirements of the electric vehicle,an improved method-vector control method is put forward.By analyzing the traditional vector control method,a model of induction motor is established considering stator iron loss and rotor iron loss.This model contains physical model and mathematical model.Mathematical model is set up based on the special requirements of electric vehicles on the induction motor,that is,the induction motor must have a wide speed range and fast torque response.Then,through the extraction of the formula,the dynamic compensation proposal and static compensation proposal can be got.Ultimately,the simulation analysis testifies the effectiveness of the method.展开更多
The transition from empirical and applied approach toward a scientific approach in modem medical disinsection is a result of the discoveries of the organic chemistry. The most intensive used substance in this fteld-D...The transition from empirical and applied approach toward a scientific approach in modem medical disinsection is a result of the discoveries of the organic chemistry. The most intensive used substance in this fteld-DDT (dichlorodiphenyltrichloroethane) is introduced during World War II and contributes to world practical epidemiology just as antibiotics in clinical medicine. However, after the 70s, this substance was placed under a ban, because of the accumulated evidence of many adverse health and environmental impacts globally. Improvement of the insecticides after "DDT-era" is represented by the introduction of organophosphate and carbamate insecticides in the 1960s. Their broad application is determined by better ecotoxicological characteristics. The advance in biotechnology after the 1980s establishes the new class of insecticides-synthetic pyrethroids. Nowadays they are basic for the insect control. Pyrethroids are characterized by selective impact on insects with much less impact on warm-blooded animals and the environment. Insecticides from the newest class insect growth regulators realize their mode of activity by interfering with chitin metabolism and thus prevent an insect from reaching maturity. These substances have extremely low toxicity, which makes them very promising for the treatment of civilian and military facilities.展开更多
In this paper,a new method for adjusting the current of three-phase voltage source DC-AC converter in orthogonal(DQ)reference frame is presented.In the DQ reference system,AC variable appears in the constant form of D...In this paper,a new method for adjusting the current of three-phase voltage source DC-AC converter in orthogonal(DQ)reference frame is presented.In the DQ reference system,AC variable appears in the constant form of DC,making the controller design the same as the DC-DC converter[1].It provides controllable gain benefits at the steady-state operating point,and finally realizes zero steady-state error[2].In addition,the creative analytical model is dedicated to building up a series of virtual quantities orthogonal to the actual single-phase system.In general,orthogonal imaginary numbers get the reference signal by delaying the real quantity by a quarter period.However,the introduction of such time delay makes the dynamic response of the system worse.In this paper,orthogonal quantities are generated from a virtual axis system parallel to the real axis,which can effectively improve the dynamic performance of traditional methods without increasing the complexity of controller structure.Through PSCAD simulation,the ideal experimental results are obtained.展开更多
Recent development and recognition methods of raster to vector conversion for engineering drawings are presented. The advantages and disadvantages of all existing models are analyzed. Some research challenges and futu...Recent development and recognition methods of raster to vector conversion for engineering drawings are presented. The advantages and disadvantages of all existing models are analyzed. Some research challenges and future directions are discussed.展开更多
Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase(s) loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this ...Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase(s) loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, a vector control scheme to a five-phase induction machine is introduced to ensure equal phase currents and minimum torque ripples under a phase open circuit. The controller idea can be extended to any number of phases with any number of open phases. The fundamental dq components of the stator voltage are obtained using only two PI controllers for the fundamental sequence plane, as in conventional vector control of three-phase machines. Based on steady state model, a simple expression is derived to estimate the required dq voltage components of other sequence planes to ensure equal stator phase currents and minimum torque ripple. A five-phase machine is simulated using MATLAB/Simulink to ensure controller validity.展开更多
A vector control based on the extended equivalent circuit and virtual circuits is proposed for the single-phase inverter.By the extended circuit,the other two phase voltages can be extended by the output voltage of th...A vector control based on the extended equivalent circuit and virtual circuits is proposed for the single-phase inverter.By the extended circuit,the other two phase voltages can be extended by the output voltage of the single-phase inverter so as to construct the voltage vector.The voltage outer-loop is to control the voltage vector in dq coordinate system,and the output voltage can track the target value without deviation in steady state.By designing the virtual circuit,the voltage inner-loop can achieve approximate decoupling and improve the dynamic response under the changeable load.Compared with the traditional dual closed-loop control,the proposed dual closed-loop control scheme only needs to detect and control the voltage without the current.It not only can achieve good control effect,but also reduce the complexity of the hardware.Finally,the simulation and experimental results show that the single-phase inverter has good static and dynamic characteristics regardless of stable load or changeable load.展开更多
Control methods of hysteresis current vector control of permanent magnet synchronous servo drive fed by voltage source inverter are examined. Detailed description of the control methods in stationary reference frame w...Control methods of hysteresis current vector control of permanent magnet synchronous servo drive fed by voltage source inverter are examined. Detailed description of the control methods in stationary reference frame with circle, square and hexagon shape tolerance area using adaptive solutions is presented. The theoretical considerations are supported by simulation results.展开更多
基金The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through Large Groups Project under grant number(RGP.2/111/43).
文摘Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.
文摘Long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS) are the main indoor malaria vector tools control tools. The study examined housing characteristics and investigated the relationship between the total volume of household possessions, the volume of the sleeping room, and the hanging of LLINs. A total of 831 bedrooms were randomly selected in Benin in 2015. The findings showed that mud walls were predominant in rural areas (more than 75%), while metal roofs were common (77.3% - 97.9%). Battery-powered lighting was prevalent in rural areas in Northern (97%), while open-flame oil lamps were commonly used in rural areas in Southern (86%). The availability of correct bedding was low, ranging from 1% to 10% in all households. 20% of the bedrooms had at least 50% of their volume occupied by household possessions in urban areas. In rural areas, bedrooms without LLINs had a lower mean rate ratio of the volume occupied by possessions per the total volume of the room compared to bedrooms with at least one LLIN installed (p < 0.0001). The characteristics of human habitats are not favourable to the correct use of vector control intervention indoors. It is therefore important to improve people’s living conditions as the next step for malaria elimination.
文摘The anarchic urbanization of certain African cities favors the multiplication of the malaria parasite. Thus, the urgent mobilization of African cities is essential to combat this health risk. It is, therefore, with the objective of contributing to the investigation of problem areas that the present study evaluates malaria transmission and vector control strategies in the Cotonou V health zone in particular. This is a cross-sectional study taking into account four neighborhoods, including Wologuèdè, Sainte Rita, Gbèdjromèdé and the area around Etoile Rouge. Two nocturnal captures on voluntary humans and the method of spray were carried out in the dry season from December 2021 to February 2022. On the captured Anopheles, the ELISA Circum-Sporozoite Protein test was performed to determine the infectivity and calculate some transmission parameters. Finally, we conducted a survey using the second stage sampling method with one step to ask selected households about their knowledge of vector control methods, their use and the physical integrity of LLINs. We collected 2386 culicidae of which the majority was Culex quinquefasciatus. After the ELISA test, the 29 Anopheles tested, showed no infectivity, i.e. an EIR of 0 pi/h/n. In addition, 99% of the populations in the Cotonou V area use LLINs to protect themselves. However, coils, door and window screens, aerosol sprays, skin and household repellents, and periodic indoor spraying were used. Finally, the majority of nets observed had T1 tears, but there were also T2, T3 and T4 nets (P-value = 0.0). This study confirms that malaria transmission during the dry season in the Cotonou V health zone is almost negligible but not non-existent. Also, populations are exposed to the nuisance of Culex quinquefasciatus mosquitoes continuously throughout the year.
文摘A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.
基金Support by Science and Technology Development Program of Jilin Province(20080106)~~
文摘[Objective] Sheep contagious ecthyma virus B2L gene recombinant adenovirus was built by adenovirus vector system.[Method] Genome DNA extracted from sheep contagious ecthyma virus strain JLSY04 as a template,Gene fragments obtained from B2L by PCR amplification;B2L gene cloning was cloned into PDNR-CMD vector,screening positive clones and plasmid CTC572-6 was obtained;CTC572-6 plasmid for homologous was recombined with the adenoviral vector.Screening positive clones and bacilli PCR,digestion and sequencing and so on were identified.[Result] After identified by enzyme digestion and gene sequencing,recombinant adenovirus vector CTC572Ade-30 of carrying sheep contagious ecthyma virus B2L gene was constructed successfully.[Conclusion] Which laid the foundation for sheep contagious ecthyma genetically engineered vaccine.
文摘A simple control structure in servo system is occasionally needed for simple industrial application which precise and high control performance is not exessively important so that the cost production can be reduced efficiently. Simplified vector control, which has simple control structure, is utilized as the permanent magnet synchronous motor control algorithm and genetic algorithm is used to tune three PI controllers used in simplified vector control. The control performance is obtained from simulation and investigated to verify the feasibility of the algorithm to be applied in the real application. Simulation results show that the speed and torque responses of the system in both continuous time and discrete time can achieve good performances. Furthermore, simplified vector control combined with genetic algorithm has a similar perfofmance with conventional field oriented control algorithm and possible to be realized into the real simple application in the future.
基金National Natural Science Foundation of China(30100160,30271179)
文摘Objective: To construct recombinant retroviral vector containing HIV-1 Tatgene and evaluate the junction of the expressed Tat in target cells. Methods: HIV-1 Tat_(101) genewas recovered from pEV plasmid by Hind Ⅲ digestion and cloned into expression plasmid LZESpBMN-Z toconstruct recombinant retroviral expression plasmid named LZRS-Tat_(101). Using the method ofcalcium phosphate, the construct of LZRS-Tat_(101) was then transfected into packaging cell linesPhoenix (ΦNX) which contained env and gal genes encoding structural proteins and pol gene codingfor 3 enzymes ( reverse transcriptase, protease and integrate) essential for retroviral integrationand replication . The stable transfected cell lines was obtained using puromycin to screen for morethan 3 days. Then, immunohistochemical (IHC ) staining was carried out to detect the expressionlevel of Tat_(101) protein in both transiently and stably trancfected ΦNX, respectively. Thesupematants containing recombinant virus collected from transient and stable transfected cells wereemployed to infect 293 cells, respectively, and the expressed Tat in 293 cells was tested by Westernblot. Meantime, the supematants of infected 293 cells was further added to HL3T1 cells which wereHela cell lines containing an HIV-1-LTR/CAT reporter construct to establish a co-culture system.After co-culture for 72 hours, the protein was extracted from HL3T1 cells and used for CAT activityassay. Results: After LZRS- Tat_(101) was transfected into ΦNX, the amount of expressed Tat intransient transfection cells was significantly higher than that in stable transfection cells; Tatcould be detected not only in 293 cells but also in the supematants from 293 cells culture, and Tatin the supematants could activate HIV-1 LTR promoter in HL3T1, resulting in high 'expression of CATlocated at the downstream of LTR. Conclusion: The construct of recombinant retrovirus LZRS-Tat_(101) could express Tat protein in target cells and the expressed Tat was functionally activeand can really exhibit the ability to activate transcription.
文摘The high speed motor is effective to realize downsizing motor in an electric vehicle(EV).Switched Reluctance Motor(SRM)is possible to the high speed drive because the rotor structure has simple and robust.However,the vibration and the acoustic noise are large from the drive principle.Moreover,the conventional complicated current excitation results in the difficulty of the torque controller design.To overcome these problems,the vector control has been proposed for SRM drive.However,the vector control has not been applied to the SRM in the high speed drive.In this paper,the drive conditions such as switching frequency,bus voltage for driving the SRM in the high speed region are clarified.It is shown that the proposed SRM can be driven by the vector control in the high speed region and can realize low vibration.
基金supported by the National Natural Science Foundation of China (Grant No.30740013)the Key Laboratory for Genetics and Breeding in Forestry Trees and Ornamental Plants,Ministry of Education (03-05)
文摘Given the sequence of Chs gene promoter from Arabidopsis thaliana reported in GenBank (AF248988), a pair of specific PCR primers was designed with the Primer Premier 5.0 software. PCR products of about 0.5 kb were successfully amplified with the genome DNA of A. thaliana as a DNA template and Taq polymerase as DNA polymerase. The purified PCR products were ligated to the pMD18-T vector. The sequencing result showed that the Chs promoter from A. thaliana was 531 bp long. Sequence alignment analysis based on the DNAMAN software revealed that the sequence similarity between the cloned promoter and target promoter (AF248988) was up to 100%. Online PLACE analysis indicated that the Chs promoter contained cis-elements such as TATA-box, CAAT-box, pollen-box, G-box, ACGT-containing element, R response element, Myb recognition element and TACPyAT-box. At the same time, a plant expression vectorpAtChs::GUS which fused the Chs promoter and the marker gene GUS was successfully constructed.
文摘A speed-sensorless vector control system for induction machines (IMs)is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated through the method of q-axis rotor flux converging on zero with proportional integral regulator, A 0.75 kW,50 Hz,two-pole induction machine was used in the simulation and experimental verification, The simulation model was constructed in Matlab. A series of tests were performed in the field weakening region, for both no-load and loaded operation. The estimated speed tracks the actual speed well in the based speed region and field weakening region ( 1 per unit value to 4 per unit value). The small estimation error of residual speed is due to the existence of slip.
文摘The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compen- sated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the prooosed method is simole and effective, and the accuracy of field position is improved.
文摘A vector control system for electric vehicle (EV) induction motor drive system is designed and developed. Its hardware system based on dual CPU(microcomputer 80C196KC and DSP TMS320F2407) is implemented. The fundamental mathematics equations of induction motor in the general synchronously rotating reference frame ( M T frame) used for vector control are achieved by coordinate transformation. Rotor flux equation and torque equation are deduced. According to these equations, an induction motor mathematical model and rotor flux observer model are built separately. The rotor flux field oriented vector control method is implemented based on these models in system software, some of the simulation results with Matab/Simulink are given. The simulation results show that the vector control system for EV induction motor drive system has better static and dynamic performance, and the rotor flux field oriented vector control method was practically verified.
文摘This paper presents a speed sensorless vector control system for induction machine (IM),which is based on a flux observer. According to vector control theory of IM,the q-axis rotor flux converging on zero is utilized for speed estimation. Additionally this system solved the online identification of stator resistance by d-axis flux error. The advantages of the proposed system are simplicity and avoidance of the problems caused by only using a voltage model. The effectiveness of the proposed system has been verified by simulation and experimentation.
文摘In order to improve the effect of the induction motor controller of the electric vehicle and meet the special requirements of the electric vehicle,an improved method-vector control method is put forward.By analyzing the traditional vector control method,a model of induction motor is established considering stator iron loss and rotor iron loss.This model contains physical model and mathematical model.Mathematical model is set up based on the special requirements of electric vehicles on the induction motor,that is,the induction motor must have a wide speed range and fast torque response.Then,through the extraction of the formula,the dynamic compensation proposal and static compensation proposal can be got.Ultimately,the simulation analysis testifies the effectiveness of the method.
文摘The transition from empirical and applied approach toward a scientific approach in modem medical disinsection is a result of the discoveries of the organic chemistry. The most intensive used substance in this fteld-DDT (dichlorodiphenyltrichloroethane) is introduced during World War II and contributes to world practical epidemiology just as antibiotics in clinical medicine. However, after the 70s, this substance was placed under a ban, because of the accumulated evidence of many adverse health and environmental impacts globally. Improvement of the insecticides after "DDT-era" is represented by the introduction of organophosphate and carbamate insecticides in the 1960s. Their broad application is determined by better ecotoxicological characteristics. The advance in biotechnology after the 1980s establishes the new class of insecticides-synthetic pyrethroids. Nowadays they are basic for the insect control. Pyrethroids are characterized by selective impact on insects with much less impact on warm-blooded animals and the environment. Insecticides from the newest class insect growth regulators realize their mode of activity by interfering with chitin metabolism and thus prevent an insect from reaching maturity. These substances have extremely low toxicity, which makes them very promising for the treatment of civilian and military facilities.
文摘In this paper,a new method for adjusting the current of three-phase voltage source DC-AC converter in orthogonal(DQ)reference frame is presented.In the DQ reference system,AC variable appears in the constant form of DC,making the controller design the same as the DC-DC converter[1].It provides controllable gain benefits at the steady-state operating point,and finally realizes zero steady-state error[2].In addition,the creative analytical model is dedicated to building up a series of virtual quantities orthogonal to the actual single-phase system.In general,orthogonal imaginary numbers get the reference signal by delaying the real quantity by a quarter period.However,the introduction of such time delay makes the dynamic response of the system worse.In this paper,orthogonal quantities are generated from a virtual axis system parallel to the real axis,which can effectively improve the dynamic performance of traditional methods without increasing the complexity of controller structure.Through PSCAD simulation,the ideal experimental results are obtained.
文摘Recent development and recognition methods of raster to vector conversion for engineering drawings are presented. The advantages and disadvantages of all existing models are analyzed. Some research challenges and future directions are discussed.
文摘Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase(s) loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, a vector control scheme to a five-phase induction machine is introduced to ensure equal phase currents and minimum torque ripples under a phase open circuit. The controller idea can be extended to any number of phases with any number of open phases. The fundamental dq components of the stator voltage are obtained using only two PI controllers for the fundamental sequence plane, as in conventional vector control of three-phase machines. Based on steady state model, a simple expression is derived to estimate the required dq voltage components of other sequence planes to ensure equal stator phase currents and minimum torque ripple. A five-phase machine is simulated using MATLAB/Simulink to ensure controller validity.
基金This work was supported in part by the National Natural Science Foundation of China under Grant 61773006.
文摘A vector control based on the extended equivalent circuit and virtual circuits is proposed for the single-phase inverter.By the extended circuit,the other two phase voltages can be extended by the output voltage of the single-phase inverter so as to construct the voltage vector.The voltage outer-loop is to control the voltage vector in dq coordinate system,and the output voltage can track the target value without deviation in steady state.By designing the virtual circuit,the voltage inner-loop can achieve approximate decoupling and improve the dynamic response under the changeable load.Compared with the traditional dual closed-loop control,the proposed dual closed-loop control scheme only needs to detect and control the voltage without the current.It not only can achieve good control effect,but also reduce the complexity of the hardware.Finally,the simulation and experimental results show that the single-phase inverter has good static and dynamic characteristics regardless of stable load or changeable load.
文摘Control methods of hysteresis current vector control of permanent magnet synchronous servo drive fed by voltage source inverter are examined. Detailed description of the control methods in stationary reference frame with circle, square and hexagon shape tolerance area using adaptive solutions is presented. The theoretical considerations are supported by simulation results.