An interacting multiple model-based two-stage Kalman filter for vehicle positioning

To address the problem that a general augmented state Kalman filter or a two-stage Kalman filter cannot achieve satisfactory positioning performance when facing uncertain noise of the micro-electro-mechanical system（MEMS） inertial sensors, a novel interacting multiple model-based two-stage Kalman filter（IMM-TSKF） is proposed to adapt to the uncertain inertial sensor noise. Three bias filters are developed based on different noise characteristics to cover a wide range of noise levels. Then, an accurate estimation of biases is calculated by the interacting multiple model algorithm to correct the bias-free filter. Thus, the vehicle positioning system can achieve good performance when suffering from uncertain inertial sensor noise. The experimental results indicate that the average position error of the proposed IMMTSKF is 25% lower than that of the general TSKF.

Vehicle Positioning Based on Optical Camera Communication in V2I Environments

Demand for precise vehicle positioning(VP)increases as autonomous vehicles have recently been drawing attention.This paper proposes a scheme for positioning vehicles on the move based on optical camera communication(OCC)technology in the vehicle-to-infrastructure(V2I)environment.Light-emitting diode(LED)streetlights and vehicle cameras are used as transmitters and receivers respectively.Regions of streetlights are detected and traced by examining images that are obtained from cameras of vehicles.Then,a scheme for analyzing visible light data extracted from the images is proposed.The proposed vehicle positioning scheme uses information on angles between vectors that are formed under the collinearity conditions between the absolute coordinates of at least three received streetlights,and the coordinates of an image sensor.The experiments are performed under stationary state and moving state at a speed of 5 and 20 km/h.To verify the reliability of the proposed scheme,a comparison is made between the actual and estimated location of the camera in the stationary state.In addition,the path of a moving vehicle and the estimated path of the vehicle are compared to check the performance of the scheme.The performance of the proposed technique is analyzed and experimental demonstration confirms that the proposed OCC-based VP scheme achieves positioning accuracy of under 1 m.

Vehicle Positioning Method Based on RFID in Vehicular Ad-Hoc Networks

With the rapid development of vehicular ad hoc network( VANET) technology,VANET applications such as safe driving and emergency rescue demand high position accuracy,but traditional GPS is difficult to meet new accuracy requirements. To overcome this limitation,a new vehicle positioning method based on radio frequency identification( RFID) is proposed. First RFID base stations are divided into three categories using fuzzy technology,and then Chan algorithm is used to calculate three vehicles' positions,which are weighed to acquire vehicles' accurate position. This method can effectively overcome the problem that vehicle positioning accuracy is not high resulting from the factors such as ambient noise and base distribution when Chan algorithm is used. Experimental results show that the performance of the proposed method is superior to Chan algorithm and 2-step algorithm based on averaging method,which can satisfy the requirements of vehicle positioning in VANETs.

Application Research of an Intelligent Detection Algorithm for Vehicle Trajectory Route Deviation

In the vehicle trajectory application system, it is often necessary to detect whether the vehicle deviates from the specified route. Trajectory planning in the traditional route deviation detection is defined by the driver through the mobile phone navigation software, which plays a more auxiliary driving role. This paper presents a method of vehicle trajectory deviation detection. Firstly, the manager customizes the trajectory planning and then uses big data technologies to match the deviation between the trajectory planning and the vehicle trajectory. Finally, it achieves the supervisory function of the manager on the vehicle track route in real-time. The results show that this method could detect the vehicle trajectory deviation quickly and accurately, and has practical application value.

An Investigation of Purely Azimuthal Passive Localization and Position Adjustment in Attempted UAV Formation Flights

When a cluster of unmanned aerial vehicles (UAVs) is flying in formation, it is crucial to maintain the formation and not to be interfered by external electromagnetic wave signals. In order to maintain the formation, this paper proposes to use pure azimuth passive positioning to adjust the position of UAVs, i.e., certain UAVs in the formation transmit signals, the rest of the UAVs receive the signals passively, and extract the orientation information from them to adjust the position of the UAVs [1] [2] [3]. In this paper, the position adjustment problem of UAVs in “circular” formation flight under three models is investigated. To address the problem of “how to obtain the position of the receiving UAV when there are two UAVs with known numbers and evenly distributed on the circumference in addition to the UAV transmitting at the known center of the circle, and the rest of the UAVs with slight deviations in their positions are receiving the signals”, two purely mathematical geometric methods, namely, triangular localization method and polar co-ordinate method, are proposed respectively. We have determined the position of the receiving UAV;we have used the exhaustive method and the construction and disproof method to solve the problem of “how many UAVs are needed to transmit signals in order to realize the effective positioning of the UAVs when it is known that a certain UAV with a slight deviation in its position receives the signals emitted by two UAVs at the same time”, and the results show that: in addition to the known signals emitted by two UAVs, it is also necessary to transmit the signals emitted by two UAVs. The results show that in addition to the known two UAVs transmitting signals, two additional UAVs are required to transmit signals for precise po-sitioning. When the position of UAVs has deviation at the initial moment, the ideal approximation method and the target delimitation method are pro-posed, and the target of nine UAVs uniformly distributed on a circle of a spe-cific radius is achieved through several adjustments, after which the ad-vantages and disadvantages of each model are analyzed, and suggestions for improvement are put forward. The purely azimuthal passive localization method and the constructed model approach proposed in this paper can be extended to other fields, such as spacecraft formations in space and battle-ship formations at sea, as well as other formation flight position adjustment problems.

A cluster positioning architecture and relative positioning algorithm based on pigeon fock bionics

Unmanned clusters can realize collaborative work,fexible confguration,and efcient operation,which has become an important development trend of unmanned platforms.Cluster positioning is important for ensuring the normal operation of unmanned clusters.The existing solutions have some problems such as requiring external system assistance,high system complexity,poor architecture scalability,and accumulation of positioning errors over time.Without the aid of the information outside the cluster,we plan to construct the relative position relationship with north alignment to adopt formation control and achieve robust cluster relative positioning.Based on the idea of bionics,this paper proposes a cluster robust hierarchical positioning architecture by analyzing the autonomous behavior of pigeon focks.We divide the clusters into follower clusters,core clusters,and leader nodes,which can realize fexible networking and cluster expansion.Aiming at the core cluster that is the most critical to relative positioning in the architecture,we propose a cluster relative positioning algorithm based on spatiotemporal correlation information.With the design idea of low cost and large-scale application,the algorithm uses intra-cluster ranging and the inertial navigation motion vector to construct the positioning equation and solves it through the Multidimensional Scaling(MDS)and Multiple Objective Particle Swarm Optimization(MOPSO)algorithms.The cluster formation is abstracted as a mixed direction-distance graph and the graph rigidity theory is used to analyze localizability conditions of the algorithm.We designed the cluster positioning simulation software and conducted localizability tests and positioning accuracy tests in diferent scenarios.Compared with the relative positioning algorithm based on Extended Kalman Filter(EKF),the algorithm proposed in this paper has more relaxed positioning conditions and can adapt to a variety of scenarios.It also has higher relative positioning accuracy,and the error does not accumulate over time.

OKPS: A Reactive/Cooperative Multi-Sensors Data Fusion Approach Designed for Robust Vehicle Localization

This paper presents the Optimized Kalman Particle Swarm (OKPS) filter. This filter results from two years of research and improves the Swarm Particle Filter (SPF). The OKPS has been designed to be both cooperative and reactive. It combines the advantages of the Particle Filter (PF) and the metaheuristic Particle Swarm Optimization (PSO) for ego-vehicles localization applications. In addition to a simple fusion between the swarm optimization and the particular filtering (which leads to the Swarm Particle Filter), the OKPS uses some attributes of the Extended Kalman filter (EKF). The OKPS filter innovates by fitting its particles with a capacity of self-diagnose by means of the EKF covariance uncertainty matrix. The particles can therefore evolve by exchanging information to assess the optimized position of the ego-vehicle. The OKPS fuses data coming from embedded sensors (low cost INS, GPS and Odometer) to perform a robust ego-vehicle positioning. The OKPS is compared to the EKF filter and to filters using particles (PF and SPF) on real data from our equipped vehicle.

Indoor Vehicle Positioning Based on Multi-Sensor Data Fusion

This study proposes a Kalman filter-based indoor vehicle positioning method for cases in which the steering angle and rotation speed of the vehicle’s wheels are unknown.By fusing the position and velocity data from the ultra-wideband sensors and acceleration and orientation data from the inertial measurement unit,we developed two algorithms to estimate the real-time position of the vehicle based on a linear Kalman filter and extended Kalman filter,respectively.We then conducted simulations and experiments to examine the performances of the algorithms.In the experiment,the Kalman filtering hyperparameters are configured,and we then ran the two algorithms to determine the positioning precision and accuracy with the ground truth produced via LiDAR.We verified that our method can improve precision and accuracy compared with the raw positioning data and can achieve desirable effects for indoor vehicle positioning when vehicles travel at low speeds.

Estimation of Vehicle Pose and Position with Monocular Camera at Urban Road Intersections

With the rapid development of urban, the scale of the city is expanding day by day. The road environment is becoming more and more complicated. The vehicle ego-localization in complex road environment puts forward imperative requirements for intelligent driving technology. The reliable vehicle ego-localization, including the lane recognition and the vehicle position and attitude estimation, at the complex traffic intersection is significant for the intelligent driving of the vehicle. In this article, we focus on the complex road environment of the city, and propose a pose and position estimation method based on the road sign using only a monocular camera and a common GPS （global positioning system）. Associated with the multi-sensor cascade system, this method can be a stable and reliable alternative when the precision of multi-sensor cascade system decreases. The experimental results show that, within 100 meters distance to the road signs, the pose error is less than 2 degrees, and the position error is less than one meter, which can reach the lane-level positioning accuracy. Through the comparison with the Beidou high-precision positioning system L202, our method is more accurate for detecting which lane the vehicle is driving on.