In this work,we investigated the influences of salinity,temperature,and hydrostatic pressure on the acoustics of seafloor surficial sediment by theoretically and experimentally analyzing the sound velocity ratio of th...In this work,we investigated the influences of salinity,temperature,and hydrostatic pressure on the acoustics of seafloor surficial sediment by theoretically and experimentally analyzing the sound velocity ratio of the seafloor sediment to the bottom sea-water in typical environmental conditions.Temperature-and pressure-controlled experiments were conducted to examine the charac-teristics of the sound velocity ratio,the results of which agree with the theoretical analysis using the effective density fluid model.Of the three environmental factors considered,the sound velocity ratio was found to be sensitive to temperature and pressure but not to salinity,with the sound velocity ratio decreasing with temperature and hydrostatic pressure.With respect to surficial sediments,pore water plays a key role in the sound velocity ratio of sediment influenced by different environmental factors.The sound velocities of different types of sediments(sandy,silty,and clayey)change similarly with temperature,but change slightly differently with hydro-static pressure.The influence of environmental factors on the sound velocity ratio of seafloor sediment is independent of the detec-tion frequency.The results show that the sound velocity ratio can change up to 0.0008 per℃ when the temperature ranges from 2℃ to 25℃ and up to 0.00064MPa−1 when the seawater depth pressure ranges from 0MPa to 40MPa.展开更多
In the present work, we propose to numerically study a combined turbulent wall and offset jet flow(this combination will be denoted WOJ). Several turbulence models were tested in this study: the standard k-w, SST k-w,...In the present work, we propose to numerically study a combined turbulent wall and offset jet flow(this combination will be denoted WOJ). Several turbulence models were tested in this study: the standard k-w, SST k-w, standard k-ε, RNG, and realizable k-ε model. A parametric study was performed to determine the effect of offset ratio H and the velocity ratio r on the longitudinal and transverse positions of the merge point(MP), the combined point(CP), the upper vortex center(UVC) and the lower vortex center(LVC). Correlations that predict the position of these characteristic points of the WOJ flow as a function of H and r have been provided. Results show that any increase in the velocity ratio causes a displacement of the MP, CP, UVC and LVC further upstream along the longitudinal direction. Concerning the transverse positions, the increase of velocity ratio results in a deviation of the merge point(MP) and the lower vortex center(LVC) toward the strong jet(LWJ) whereas the transverse position of combined point(CP) and the upper vortex center(UVC) is almost independent of the velocity ratio.展开更多
Within a short period of 7 months from July 12, 1995 to February 3, 1996, three earthquakes occurred continually to west Menglian in the border area of China Myanmar ( M =7.3), in Wuding county M =6.5 and in L...Within a short period of 7 months from July 12, 1995 to February 3, 1996, three earthquakes occurred continually to west Menglian in the border area of China Myanmar ( M =7.3), in Wuding county M =6.5 and in Lijiang ( M =7.0) in Yunnan area. In this paper, the authors have studied the time space evolution characteristics of wave velocity ratio ( γ ) in observed at 5 single stations and the average value of several stations before the recent strong earthquakes. It is discovered that 5~8 years before the earthquake with M =7, source precursors of long medium term, with high (low) drastic variations of wave velocity ratio, appeared within 120 km from the epicenters, and the source precursors of long medium term entered into medium short term stage when the amplitude of wave velocity ratio suddenly increased (decreased) or times of earthquake increase drastically. Three to five years before M =6 earthquakes, source precursors of long medium term and near field precursors of long medium term, with abrupt velocity change of high values, appeared within 40 and 150 km; however, the indicator is not clear in the period of transition to medium short stage. The anomaly of γ within 150 km from the epicenter reaches as much as 3.0, while the maximum value is 2.36 in the area 250 km away, showing the characteristics that the shorter the distance the bigger the abrupt change. Namely, the anomalous amplitudes of source precursors and near field precursors are 20%~60% bigger than that of far field precursors. The reliability of abrupt variation data of γ and its physical mechanism have also been explored in this paper.展开更多
Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave ...Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave dispersion, Rayleigh wave ZH ratio (i.e., ellipticity), and receiver function data to better resolve 1D crustal shear wave velocity (Vs) structure. Surface wave dispersion and Rayleigh wave ZH ratio data are more sensitive to absolute variations of shear wave speed at depths, but their sensi- tivity kernels to shear wave speeds are different and complimentary. However, receiver function data are more sensitive to sharp velocity contrast (e.g., due to the existence of crustal interfaces) and Vp/Vs ratios. The stepwise inversion method takes advantages of the complementary sensitivities of each dataset to better constrain the Vs model in the crust. We firstly invert surface wave dispersion and ZH ratio data to obtain a 1D smooth absolute vs model and then incorporate receiver function data in the joint inver- sion to obtain a finer Vs model with better constraints on interface structures. Through synthetic tests, Monte Carlo error analyses, and application to real data, we demonstrate that the proposed joint inversion method can resolve robust crustal Vs structures and with little initial model dependency.展开更多
Numerical study about vortex-induced vibration (V/V) related to a flexible riser model in consideration of internal flow progressing inside has been performed. The main objective of this work is to investigate the c...Numerical study about vortex-induced vibration (V/V) related to a flexible riser model in consideration of internal flow progressing inside has been performed. The main objective of this work is to investigate the coupled fluid-structure interaction (FSI) taking place between tensioned riser model, external shear current and upward-progressing internal flow (from ocean bottom to surface). A CAE technology behind the current research which combines structural software with the CFD technology has been proposed. According to the result from dynamic analysis, it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode (/dominant frequency), vibration intensity and the magnitude of instantaneous vibration amplitude, when the velocity ratio of internal flow against external current is relatively high. As a rule, the larger the velocity of intemal flow is, the more it contributes to the dynamic vibration response of the flexible riser model. In addition, multi-modal vibration phenomenon has been widely observed, for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.展开更多
2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into...2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into con-sideration. The result shows that: 1) Average crustal velocity ratio is obviously higher in Tarim block than in West Kunlun Mts. and Tianshan fold zone, which reflects its crustal physical property of 'hardness' and stability. The relatively low but normai velocity ratio (Poisson's ratio) of the lower crust indicates that the 'downward thrusting' of Tarim basin is the main feature of crustal movement in this area. 2) The rock layer in the upper crust of Tianshan fold zone is relatively 'soft', which makes it prone to rupture and stress energy release. This is the primary tectonic factor for the concentration of small earthquakes in this area. 3) Jiashi is located right over the apex or the inflection point of the updoming lower crustal interface C and the crust-mantle boundary, which is the deep struc-tural background for the occurrence of strong earthquakes. The alternate variation of vp/vs near the block bounda-ries and the complicated configuration of the interfaces in the upper and middie part of the upper crust form a par-ticular structural environment for the Jiashi strong earthquake swarm. vp/vs is comparatively high and shear modulus is low at the focal region, which may be the main reason for the low stress drop of the Jiashi strong earthquake swarm.展开更多
Extensive geophysical research has been carried out in southeast Tibet due to the complex geological structure and high seismicity.The study of the Moho interface can provide useful information for the geophysical res...Extensive geophysical research has been carried out in southeast Tibet due to the complex geological structure and high seismicity.The study of the Moho interface can provide useful information for the geophysical research.SWChinaCVM-1.0 is the first version of a regional community velocity model for the Sichuan-Yunnan region and aims to provide a reference for seismological research in the region.Based on this model,a high-precision community Moho interface model can be obtained using common conversion point(CCP)stacking,to further expand the applicability of SWChinaCVM-1.0.Before CCP stacking,it is necessary to check the fit of the practical and theoretical travel times of the Ps phase and its multiples under the constraints of the model.Using this method,referred to as Hκ0 stacking,we determined the Moho interface.However,the multiples were poorly fitted with the theoretical travel times at many stations,and the crustal thickness obtained was inconsistent with previous findings.Therefore,we speculate that the SWChinaCVM-1.0 model has some limitations that render it incompatible with the CCP stacking method.To further verify this hypothesis,we performed H-κstacking using the v_(P)-v_(S)model,v_(P)model,v_(S)model,and the regional average velocity v_(P0)and compared the results with those of H_(κ0)stacking.The results of the comparison indicate that the SWChinaCVM-1.0 model requires improvements.In addition,by analyzing the SWChinaCVM-1.0 inversion process,we found that the v_(S)model was more reliable than the v_(P)model.Finally,we adopted the crustal thickness obtained using H-κstacking based on the v_(S)model as the initial version of a community Moho interface model for the Sichuan-Yunnan region(SWChinaCVM-MOHO-1.0).展开更多
The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed...The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed. The h-k stacking method is applied to estimate the crustal thickness and velocity ratio beneath seismic stations. The results indicate that there are sharp changes of crustal thickness and velocity ratio in the studied region. This region is located in the northeastern margin of Tibet, and also a junction of several first-grade blocks. The large contrast of crustal structure in this region is considered to be resulted from the interaction of these blocks. Our results are helpful to construct the completed model of the formation and evolution of the Tibet. Some local structures are also discussed combining with the geological faults.展开更多
Based on the ABAQUS explicit dynamic simulation platform,the finite element model of single stand mill with restrained mandrel was adopted to research the influence of mandrel - roller velocity ratio (MRVR),mandrel fr...Based on the ABAQUS explicit dynamic simulation platform,the finite element model of single stand mill with restrained mandrel was adopted to research the influence of mandrel - roller velocity ratio (MRVR),mandrel friction and tension between stands on rolling force.The analysis results show that when the MRVR is lower than 1,the rolling force increases obviously with the increase of MRVR and reaches the peak value when the MRVR is about 1.The rolling force increase induced by the MRVR increase is the main reason of the formation of the bulge defect on the tube head and tail at the entering and exiting stage during tube continuous rolling process by full floating mandrel mill,which can be intensified by the increase of mandrel friction coefficient.The rolling force decreases with the increase of tension.As the tension is larger, the rolling force decrease amplitude is larger.The influence of backward tension on rolling force is greater than that of forward tension distinctly.Tension control can be used to decrease the rolling force increase induced by the MRVR increase,which is imposing tension at the same time when the MRVR increases,in order to improve even eliminate the bulge defect,and enhance the tube dimension precision.展开更多
On the basis of S wave information from Tai′an Xinzhou DSS profile and with reference to the results from P wave interpretation, the 2 D structures , including S wave velocity V s, ratio γ between V...On the basis of S wave information from Tai′an Xinzhou DSS profile and with reference to the results from P wave interpretation, the 2 D structures , including S wave velocity V s, ratio γ between V p and V s; and Poisson′s ratio σ , are calculated; the structural configuration of the profile is presented and the relevant inferences are drawn from the above results. Upwarping mantle districts (V s≈4.30 km/s)and sloping mantle districts (V s≈4.50 km/s) of the profile with velocity difference about 4% at the top of upper mantle are divided according to the differences of V s , γ and σ in different media and structures, also with reference to the information of their neighbouring regions; the existence of Niujiaqiao Dongwang high angle ultra crustal fault zone is reaffirmed; the properties of low and high velocity blocks(zones) including the crust mantle transitionalzone and the boudary indicators of North China rift valley are discussed. A comprehensive study is conducted on the relation of the interpretation results with earthquakes. It is concluded that the mantle upwarps, thermal material upwells through the high angle fault, the primary hypocenter was located at the crust mantle juncture 30.0~33.0 km deep, and additional stress excited the M S=6.8 and M S=7.2 earthquakes at specific locations around 9.0 km below Niujiaqiao Dongwang, the earthquakes took place around the high angle ultra crustal fault and centered in the brittle media and rock strata with low γ and low σ values.展开更多
In course of a direct calculation we demonstrate the activity of parameters of the Lorentz transformation entering the original electric and magnetic field vectors E and H. The validity of the transformation is shown ...In course of a direct calculation we demonstrate the activity of parameters of the Lorentz transformation entering the original electric and magnetic field vectors E and H. The validity of the transformation is shown with the aid of the relation E <sup>2</sup>- H<sup>2</sup> = E'<sup>2</sup>- H'<sup>2 </sup>which holds for any suitable pair of the vectors E, H and E', H'. No special geometry of the vector pairs entering (E, H) and (E ', H') is assumed. The only limit applied in the paper concerns the velocity ratio betweeen v and c which should be smaller than unity.展开更多
The flow-field index in a 41-ton six-strand tundish is considered through adjusting the ratio of the casting velocity between the strands to eliminate the negative impact of iso-velocity casting in multi-strand tundis...The flow-field index in a 41-ton six-strand tundish is considered through adjusting the ratio of the casting velocity between the strands to eliminate the negative impact of iso-velocity casting in multi-strand tundish on the consistency of each strand due to the large ratio of length to width with narrow shape structure,resulting in poor consistency of each strand.In particular,the response time of strand-1 and strand-6 is relatively long,which affects the uniformity of the temperature field and flow field of the entire tundish.On the basis of verifying that the error between the numerical simulations and hydraulic experiments is less than 6%,six cases with the casting velocity ratio changing from 0.8 to 1.3(with an interval of 0.1)are considered by calculation of numerical models.It is concluded that the consistency of each flow can be obviously improved by increasing the casting velocity ratio between side-strand and middle-strand.With increasing the casting velocity ratio,the flow field in the tundish became much active,the temperature field presented well uniformity,and the tracer concentration distribution in local dead zones was improved.展开更多
Following the parameterization of sheared entrainment obtained in the companion paper, Liu et al. (2016), the present study aims to further investigate the characteristics of entrainment, and develop a simple model ...Following the parameterization of sheared entrainment obtained in the companion paper, Liu et al. (2016), the present study aims to further investigate the characteristics of entrainment, and develop a simple model for predicting the growth rate of a well-developed and sheared CBL. The relative stratification, defined as the ratio of the stratification in the free atmosphere to that in the entrainment zone, is found to be a function of entrainment flux ratio (Ae). This leads to a simple expression of the entrainment rate, in which Ae needs to be parameterized. According to the results in Liu et al. (2016), Ae can be simply expressed as the ratio of the convective velocity scale in the sheared CBL to that in the shear-free CBL. The parameterization of the convective velocity scale in the sheared CBL is obtained by analytically solving the bulk model with several assumptions and approximations. Results indicate that the entrainment process is influenced by the dynamic effect, the interaction between mean shear and environmental stratification, and one other term that includes the Coriolis effect. These three parameterizations constitute a simple model for predicting the growth rate of a well-developed and sheared CBL. This model is validated by outputs of LESs, and the results show that it performs satisfactorily. Compared with bulk models, this model does not need to solve a set of equations for the CBL. It is more convenient to apply in numerical models.展开更多
With the development of seismic engineering and seismic exploration of energy, the underground media that westudy are more and more complicated. Conventional anisotropy theory or two-phase isotropy theory is difficult...With the development of seismic engineering and seismic exploration of energy, the underground media that westudy are more and more complicated. Conventional anisotropy theory or two-phase isotropy theory is difficult todescribe anisotropic media containing fluid, such as fractures containing gas, shales containing water Based onBlot theory about two-phase anisotropy, with the use of elastic plane wave equations, we get Christoffel equations.We calculate and analyze the effects of frequency on phase velocity, attenuation, amplitude ratio and polarizationdirection of elastic waves of two-phase, transversely isotropic media. Results show that frequency affects slow Pwave the greatest among the four kinds of waves, i.e., fast P wave, slow P wave, fast S wave and slow S wave.Fluid phase amplitude to solid phase amplitude ratio of fast P wave, fast S wave and slow S wave approaches unitfor large dissipation coefficients. Polarization analysis shows that polarization direction of fluid phase displacement is different from, not parallel to or reverse to, that of solid phase displacement in two-phase anisotropic media.展开更多
On July 4, 2006, an earthquake of MS5.1 took place in Wen’an, Hebei Province, just at the south center of China’s Capital Circle area digital seismograph network. It is the strongest event recorded ever since the ne...On July 4, 2006, an earthquake of MS5.1 took place in Wen’an, Hebei Province, just at the south center of China’s Capital Circle area digital seismograph network. It is the strongest event recorded ever since the network went into operation in 2002. We processed the vast amounts of phase data yielded by the 107 digital seismic stations between 2002~2007 using Wadati method. In order to improve the precision and stability of shear and compressional wave velocities (vP/vS) calculation, we impose a number of restrictions on the computation environment and condition, e.g., the earthquakes are densely concentrated, selected stations are limited in range, the number of stations in- volved in the computation is larger than 5 and linear fitting features high precision and small error. Under these restrictions, the study shows that vP/vS in and around Wen’an and Tangshan underwent a normal-low-normal proc- ess one year before Wen’an earthquake, vP/vS became obviously low and the low ratio lasted for about one year, meanwhile, little variation of vP/vS was seen in Xingtai, northwest of Beijing, southwest of Beijing, Beijing-Tianjin and Beijing; after the quake, the vP/vS returned normal in Wen’an and Tangshan. Error and stability analysis of the calculated result for vP/vS shows it is convincible that anomaly appeared in and around Wen’an and Tangshan be- fore Wen’an earthquake.展开更多
We investigate the flow inside a 2D square cavity driven by the motion of two mutually facing walls independently sliding at different speeds.The exploration,which employs the lattice Boltzmann method(LBM),extends on ...We investigate the flow inside a 2D square cavity driven by the motion of two mutually facing walls independently sliding at different speeds.The exploration,which employs the lattice Boltzmann method(LBM),extends on previous studies that had the two lids moving with the exact same speed in opposite directions.Unlike there,here the flow is governed by two Reynolds numbers(Re_(T),Re_(B))associated to the velocities of the two moving walls.For convenience,we define a bulk Reynolds number Re and quantify the driving velocity asymmetry by a parameterα.Parameterαhas been defined in the rangeα∈[-π4,0]and a systematic sweep in Reynolds numbers has been undertaken to unfold the transitional dynamics path of the two-sided wall-driven cavity flow.In particular,the critical Reynolds numbers for Hopf and NeimarkSacker bifurcations have been determined as a function ofα.The eventual advent of chaotic dynamics and the symmetry properties of the intervening solutions are also analyzed and discussed.The study unfolds for the first time the full bifurcation scenario as a function of the two Reynolds numbers,and reveals the different flow topologies found along the transitional path.展开更多
A computational investigation of the mean flow field of turbulent rectangular jets issuing into a narrow channel crossflow is presented. The length of the jet slot spans more than 55% of the crossflow channel bed, lea...A computational investigation of the mean flow field of turbulent rectangular jets issuing into a narrow channel crossflow is presented. The length of the jet slot spans more than 55% of the crossflow channel bed, leaving a small clearance between the jet edge and sidewalls. A finite volume code employing the standard k-εmodel is used to predict the mean, three-dimensional flow field. The mean flow field is investigated for two velocity ratios (6 and 9). Important flow features, such as the formation of different vortical structures and their characteristics owing to different values of the velocity ratio, are discussed. Some predicted results are compared with the experimental data reported in the literature. The predicted mean and turbulent flow properties are shown to be in good agreement with the experimental data.展开更多
A new method based on human-likeness assessment and optimization concept to solve the problem of human-like ma- nipulation planning for articulated robot is proposed in this paper. This method intrinsically formulates...A new method based on human-likeness assessment and optimization concept to solve the problem of human-like ma- nipulation planning for articulated robot is proposed in this paper. This method intrinsically formulates the problem as a con- strained optimization problem in robot configuration space. The robot configuration space is divided into different subregions by human likeness assessment. A widely used strategy, Rapid Upper Limb Assessment (RULA) in applied ergonomics, is adopted here to evaluate the human likeness of robot configuration. A task compatibility measurement of the robot velocity transmission ratio along a specified direction is used as the target function for the optimization problem. Simple illustrative examples of this method applied to a two Degree of Freedom (DOF) planar robot that resembles the upper limb of a human are presented. Further applications to a humanoid industrial robot SDA10D are also presented. The reasonable planning results for these applications assert the effectiveness of our method.展开更多
This paper presents the results of an ongoing investigation into transient pressure pulses using Shan- non entropy. Pressure fluctuations (produced by gas-solid two-phase flow during fluidized dense-phase conveying)...This paper presents the results of an ongoing investigation into transient pressure pulses using Shan- non entropy. Pressure fluctuations (produced by gas-solid two-phase flow during fluidized dense-phase conveying) are recorded by pressure transducers installed at strategic locations along a pipeline. This work validates previous work on identifying the flow mode from pressure signals (Mittal, Mallick, & Wypych, 2014). Two different powders, namely fly ash (median particle diameter 45 μm, particle den- sity 1950 kg/m3. loosely poured bulk density 950 kg/m3) and cement (median particle diameter 15 p,m, particle density 3060 kg/m3, loosely poured bulk density 1070 kg/m3), are conveyed through different pipelines (51 mm I.D. × 70 m length and 63 mm I.D. × 24 m length). The transient nature of pressure fluc- tuations (instead of steady-state behavior) is considered in investigating flow characteristics. Shannon entropy is found to increase along straight pipe sections for both solids and both pipelines. However, Shannon entropy decreases after a bend. A comparison of Shannon entropy among different ranges of superficial air velocity reveals that high Shannon entropy corresponds to very low velocities (i.e. 3-5 m/s) and very high velocities (i.e. 11-14 m/s) while low Shannon entropy corresponds to mid-range velocities (i.e. 6-8 m/s).展开更多
Results are presented of an ongoing investigation into modeling friction in fiuidized dense-phase pneumatic transport of bulk solids. Many popular modeling methods of the solids friction use the dimen- sionless solids...Results are presented of an ongoing investigation into modeling friction in fiuidized dense-phase pneumatic transport of bulk solids. Many popular modeling methods of the solids friction use the dimen- sionless solids loading ratio and Froude number. When evaluated under proper scale-up conditions of pipe diameter and length, many of these models have resulted in significant inaccuracy. A technique for modeling solids friction has been developed using a new combination of dimensionless numbers, volu- metric loading ratio and the ratio of particle free settling velocity to superficial conveying air velocity, to replace the solids loading ratio and Froude number. The models developed using the new formalism were evaluated for accuracy and stability under significant scale-up conditions for four different prod- ucts conveyed through four different test rigs (subject to diameter and length scale-up conditions). The new model considerably improves predictions compared with those obtained using the existing model, especially in the dense-phase region. Whereas the latter yields absolute average relative errors varying between 10% and 86%, the former yielded results with errors from 4% to 20% for a wide range of scale-up conditions. This represents a more reliable and narrower range of prediction that is suitable for industrial scale-up requirements.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Nos.41676055 and 41776043)the Natural Science Foundation of Guangdong Province(No.2019A1515011055)the Foundation of Qingdao National Laboratory for Marine Science and Te-chnology(No.MGQNLM-KF201805).
文摘In this work,we investigated the influences of salinity,temperature,and hydrostatic pressure on the acoustics of seafloor surficial sediment by theoretically and experimentally analyzing the sound velocity ratio of the seafloor sediment to the bottom sea-water in typical environmental conditions.Temperature-and pressure-controlled experiments were conducted to examine the charac-teristics of the sound velocity ratio,the results of which agree with the theoretical analysis using the effective density fluid model.Of the three environmental factors considered,the sound velocity ratio was found to be sensitive to temperature and pressure but not to salinity,with the sound velocity ratio decreasing with temperature and hydrostatic pressure.With respect to surficial sediments,pore water plays a key role in the sound velocity ratio of sediment influenced by different environmental factors.The sound velocities of different types of sediments(sandy,silty,and clayey)change similarly with temperature,but change slightly differently with hydro-static pressure.The influence of environmental factors on the sound velocity ratio of seafloor sediment is independent of the detec-tion frequency.The results show that the sound velocity ratio can change up to 0.0008 per℃ when the temperature ranges from 2℃ to 25℃ and up to 0.00064MPa−1 when the seawater depth pressure ranges from 0MPa to 40MPa.
文摘In the present work, we propose to numerically study a combined turbulent wall and offset jet flow(this combination will be denoted WOJ). Several turbulence models were tested in this study: the standard k-w, SST k-w, standard k-ε, RNG, and realizable k-ε model. A parametric study was performed to determine the effect of offset ratio H and the velocity ratio r on the longitudinal and transverse positions of the merge point(MP), the combined point(CP), the upper vortex center(UVC) and the lower vortex center(LVC). Correlations that predict the position of these characteristic points of the WOJ flow as a function of H and r have been provided. Results show that any increase in the velocity ratio causes a displacement of the MP, CP, UVC and LVC further upstream along the longitudinal direction. Concerning the transverse positions, the increase of velocity ratio results in a deviation of the merge point(MP) and the lower vortex center(LVC) toward the strong jet(LWJ) whereas the transverse position of combined point(CP) and the upper vortex center(UVC) is almost independent of the velocity ratio.
文摘Within a short period of 7 months from July 12, 1995 to February 3, 1996, three earthquakes occurred continually to west Menglian in the border area of China Myanmar ( M =7.3), in Wuding county M =6.5 and in Lijiang ( M =7.0) in Yunnan area. In this paper, the authors have studied the time space evolution characteristics of wave velocity ratio ( γ ) in observed at 5 single stations and the average value of several stations before the recent strong earthquakes. It is discovered that 5~8 years before the earthquake with M =7, source precursors of long medium term, with high (low) drastic variations of wave velocity ratio, appeared within 120 km from the epicenters, and the source precursors of long medium term entered into medium short term stage when the amplitude of wave velocity ratio suddenly increased (decreased) or times of earthquake increase drastically. Three to five years before M =6 earthquakes, source precursors of long medium term and near field precursors of long medium term, with abrupt velocity change of high values, appeared within 40 and 150 km; however, the indicator is not clear in the period of transition to medium short stage. The anomaly of γ within 150 km from the epicenter reaches as much as 3.0, while the maximum value is 2.36 in the area 250 km away, showing the characteristics that the shorter the distance the bigger the abrupt change. Namely, the anomalous amplitudes of source precursors and near field precursors are 20%~60% bigger than that of far field precursors. The reliability of abrupt variation data of γ and its physical mechanism have also been explored in this paper.
基金supported by the National Earthquake Science Experiment in Sichuan and Yunnan Provinces of China(#2016 CESE 0201)National Natural Science Foundation of China(#41574034)China National Special Fund for Earthquake Scientific Research in Public Interest(#201508008)
文摘Accurate determination of seismic velocity of the crust is important for understanding regional tectonics and crustal evolution of the Earth. We propose a stepwise joint linearized inversion method using surface wave dispersion, Rayleigh wave ZH ratio (i.e., ellipticity), and receiver function data to better resolve 1D crustal shear wave velocity (Vs) structure. Surface wave dispersion and Rayleigh wave ZH ratio data are more sensitive to absolute variations of shear wave speed at depths, but their sensi- tivity kernels to shear wave speeds are different and complimentary. However, receiver function data are more sensitive to sharp velocity contrast (e.g., due to the existence of crustal interfaces) and Vp/Vs ratios. The stepwise inversion method takes advantages of the complementary sensitivities of each dataset to better constrain the Vs model in the crust. We firstly invert surface wave dispersion and ZH ratio data to obtain a 1D smooth absolute vs model and then incorporate receiver function data in the joint inver- sion to obtain a finer Vs model with better constraints on interface structures. Through synthetic tests, Monte Carlo error analyses, and application to real data, we demonstrate that the proposed joint inversion method can resolve robust crustal Vs structures and with little initial model dependency.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41106077, 51109185 and 51109186)Zhejiang Provincial Natural Science Foundation of China (Grant Nos. R5110036 and Y5110071)+2 种基金Science Research Program of Science Technology Department of Zhejiang Province (Grant No. 2011C24005)Korea Research Foundation (Grant No. KRF-2008-D00556)Scientific Research Foundation of Zhejiang Ocean University
文摘Numerical study about vortex-induced vibration (V/V) related to a flexible riser model in consideration of internal flow progressing inside has been performed. The main objective of this work is to investigate the coupled fluid-structure interaction (FSI) taking place between tensioned riser model, external shear current and upward-progressing internal flow (from ocean bottom to surface). A CAE technology behind the current research which combines structural software with the CFD technology has been proposed. According to the result from dynamic analysis, it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode (/dominant frequency), vibration intensity and the magnitude of instantaneous vibration amplitude, when the velocity ratio of internal flow against external current is relatively high. As a rule, the larger the velocity of intemal flow is, the more it contributes to the dynamic vibration response of the flexible riser model. In addition, multi-modal vibration phenomenon has been widely observed, for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.
基金State Key Basic Development and Programming Project (G1998040702)the Project (9691307) from Ministry of Science and Technology and China Seismological Bureau.
文摘2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into con-sideration. The result shows that: 1) Average crustal velocity ratio is obviously higher in Tarim block than in West Kunlun Mts. and Tianshan fold zone, which reflects its crustal physical property of 'hardness' and stability. The relatively low but normai velocity ratio (Poisson's ratio) of the lower crust indicates that the 'downward thrusting' of Tarim basin is the main feature of crustal movement in this area. 2) The rock layer in the upper crust of Tianshan fold zone is relatively 'soft', which makes it prone to rupture and stress energy release. This is the primary tectonic factor for the concentration of small earthquakes in this area. 3) Jiashi is located right over the apex or the inflection point of the updoming lower crustal interface C and the crust-mantle boundary, which is the deep struc-tural background for the occurrence of strong earthquakes. The alternate variation of vp/vs near the block bounda-ries and the complicated configuration of the interfaces in the upper and middie part of the upper crust form a par-ticular structural environment for the Jiashi strong earthquake swarm. vp/vs is comparatively high and shear modulus is low at the focal region, which may be the main reason for the low stress drop of the Jiashi strong earthquake swarm.
基金the National Natural Science Foundation of China(No.41974058)the China Seismic Experimental Site Project,China Earthquake Administration(No.2018CESE0101).
文摘Extensive geophysical research has been carried out in southeast Tibet due to the complex geological structure and high seismicity.The study of the Moho interface can provide useful information for the geophysical research.SWChinaCVM-1.0 is the first version of a regional community velocity model for the Sichuan-Yunnan region and aims to provide a reference for seismological research in the region.Based on this model,a high-precision community Moho interface model can be obtained using common conversion point(CCP)stacking,to further expand the applicability of SWChinaCVM-1.0.Before CCP stacking,it is necessary to check the fit of the practical and theoretical travel times of the Ps phase and its multiples under the constraints of the model.Using this method,referred to as Hκ0 stacking,we determined the Moho interface.However,the multiples were poorly fitted with the theoretical travel times at many stations,and the crustal thickness obtained was inconsistent with previous findings.Therefore,we speculate that the SWChinaCVM-1.0 model has some limitations that render it incompatible with the CCP stacking method.To further verify this hypothesis,we performed H-κstacking using the v_(P)-v_(S)model,v_(P)model,v_(S)model,and the regional average velocity v_(P0)and compared the results with those of H_(κ0)stacking.The results of the comparison indicate that the SWChinaCVM-1.0 model requires improvements.In addition,by analyzing the SWChinaCVM-1.0 inversion process,we found that the v_(S)model was more reliable than the v_(P)model.Finally,we adopted the crustal thickness obtained using H-κstacking based on the v_(S)model as the initial version of a community Moho interface model for the Sichuan-Yunnan region(SWChinaCVM-MOHO-1.0).
基金supported by the basic research and development fund from Institute of Earthquake Science,China Earthquake Administration(grant No.2011IESLZ05)the National Natural Science Foundation of China(grant No.40904014)
文摘The teleseismic receiver functions of digital seismic network of Ningxia and its adjacent area are calculated with two different Gauss filter factors. The accuracy and stability of the receiver functions are discussed. The h-k stacking method is applied to estimate the crustal thickness and velocity ratio beneath seismic stations. The results indicate that there are sharp changes of crustal thickness and velocity ratio in the studied region. This region is located in the northeastern margin of Tibet, and also a junction of several first-grade blocks. The large contrast of crustal structure in this region is considered to be resulted from the interaction of these blocks. Our results are helpful to construct the completed model of the formation and evolution of the Tibet. Some local structures are also discussed combining with the geological faults.
文摘Based on the ABAQUS explicit dynamic simulation platform,the finite element model of single stand mill with restrained mandrel was adopted to research the influence of mandrel - roller velocity ratio (MRVR),mandrel friction and tension between stands on rolling force.The analysis results show that when the MRVR is lower than 1,the rolling force increases obviously with the increase of MRVR and reaches the peak value when the MRVR is about 1.The rolling force increase induced by the MRVR increase is the main reason of the formation of the bulge defect on the tube head and tail at the entering and exiting stage during tube continuous rolling process by full floating mandrel mill,which can be intensified by the increase of mandrel friction coefficient.The rolling force decreases with the increase of tension.As the tension is larger, the rolling force decrease amplitude is larger.The influence of backward tension on rolling force is greater than that of forward tension distinctly.Tension control can be used to decrease the rolling force increase induced by the MRVR increase,which is imposing tension at the same time when the MRVR increases,in order to improve even eliminate the bulge defect,and enhance the tube dimension precision.
文摘On the basis of S wave information from Tai′an Xinzhou DSS profile and with reference to the results from P wave interpretation, the 2 D structures , including S wave velocity V s, ratio γ between V p and V s; and Poisson′s ratio σ , are calculated; the structural configuration of the profile is presented and the relevant inferences are drawn from the above results. Upwarping mantle districts (V s≈4.30 km/s)and sloping mantle districts (V s≈4.50 km/s) of the profile with velocity difference about 4% at the top of upper mantle are divided according to the differences of V s , γ and σ in different media and structures, also with reference to the information of their neighbouring regions; the existence of Niujiaqiao Dongwang high angle ultra crustal fault zone is reaffirmed; the properties of low and high velocity blocks(zones) including the crust mantle transitionalzone and the boudary indicators of North China rift valley are discussed. A comprehensive study is conducted on the relation of the interpretation results with earthquakes. It is concluded that the mantle upwarps, thermal material upwells through the high angle fault, the primary hypocenter was located at the crust mantle juncture 30.0~33.0 km deep, and additional stress excited the M S=6.8 and M S=7.2 earthquakes at specific locations around 9.0 km below Niujiaqiao Dongwang, the earthquakes took place around the high angle ultra crustal fault and centered in the brittle media and rock strata with low γ and low σ values.
文摘In course of a direct calculation we demonstrate the activity of parameters of the Lorentz transformation entering the original electric and magnetic field vectors E and H. The validity of the transformation is shown with the aid of the relation E <sup>2</sup>- H<sup>2</sup> = E'<sup>2</sup>- H'<sup>2 </sup>which holds for any suitable pair of the vectors E, H and E', H'. No special geometry of the vector pairs entering (E, H) and (E ', H') is assumed. The only limit applied in the paper concerns the velocity ratio betweeen v and c which should be smaller than unity.
基金supported by the National Natural Science Foundation of China (Grant Number51774031)the State Key Laboratory of Advanced Metallurgy Foundation (Grant Number 41619018)。
文摘The flow-field index in a 41-ton six-strand tundish is considered through adjusting the ratio of the casting velocity between the strands to eliminate the negative impact of iso-velocity casting in multi-strand tundish on the consistency of each strand due to the large ratio of length to width with narrow shape structure,resulting in poor consistency of each strand.In particular,the response time of strand-1 and strand-6 is relatively long,which affects the uniformity of the temperature field and flow field of the entire tundish.On the basis of verifying that the error between the numerical simulations and hydraulic experiments is less than 6%,six cases with the casting velocity ratio changing from 0.8 to 1.3(with an interval of 0.1)are considered by calculation of numerical models.It is concluded that the consistency of each flow can be obviously improved by increasing the casting velocity ratio between side-strand and middle-strand.With increasing the casting velocity ratio,the flow field in the tundish became much active,the temperature field presented well uniformity,and the tracer concentration distribution in local dead zones was improved.
基金sponsored by the National Natural Science Foundation of China(Grant No.40975004)the State Key Basic Program(973)(Grant No.2013CB430100)
文摘Following the parameterization of sheared entrainment obtained in the companion paper, Liu et al. (2016), the present study aims to further investigate the characteristics of entrainment, and develop a simple model for predicting the growth rate of a well-developed and sheared CBL. The relative stratification, defined as the ratio of the stratification in the free atmosphere to that in the entrainment zone, is found to be a function of entrainment flux ratio (Ae). This leads to a simple expression of the entrainment rate, in which Ae needs to be parameterized. According to the results in Liu et al. (2016), Ae can be simply expressed as the ratio of the convective velocity scale in the sheared CBL to that in the shear-free CBL. The parameterization of the convective velocity scale in the sheared CBL is obtained by analytically solving the bulk model with several assumptions and approximations. Results indicate that the entrainment process is influenced by the dynamic effect, the interaction between mean shear and environmental stratification, and one other term that includes the Coriolis effect. These three parameterizations constitute a simple model for predicting the growth rate of a well-developed and sheared CBL. This model is validated by outputs of LESs, and the results show that it performs satisfactorily. Compared with bulk models, this model does not need to solve a set of equations for the CBL. It is more convenient to apply in numerical models.
文摘With the development of seismic engineering and seismic exploration of energy, the underground media that westudy are more and more complicated. Conventional anisotropy theory or two-phase isotropy theory is difficult todescribe anisotropic media containing fluid, such as fractures containing gas, shales containing water Based onBlot theory about two-phase anisotropy, with the use of elastic plane wave equations, we get Christoffel equations.We calculate and analyze the effects of frequency on phase velocity, attenuation, amplitude ratio and polarizationdirection of elastic waves of two-phase, transversely isotropic media. Results show that frequency affects slow Pwave the greatest among the four kinds of waves, i.e., fast P wave, slow P wave, fast S wave and slow S wave.Fluid phase amplitude to solid phase amplitude ratio of fast P wave, fast S wave and slow S wave approaches unitfor large dissipation coefficients. Polarization analysis shows that polarization direction of fluid phase displacement is different from, not parallel to or reverse to, that of solid phase displacement in two-phase anisotropic media.
基金Special Fund for Basic Scientific Research, IGPCEA (DQJB06B03)National Program for Key Science and Technology Projects during the 11th Five-year Plan Period (2006BAC01B03-04-04)Contribution No.08FE3004, Institute of Geophysics, China Earthquake Administration.
文摘On July 4, 2006, an earthquake of MS5.1 took place in Wen’an, Hebei Province, just at the south center of China’s Capital Circle area digital seismograph network. It is the strongest event recorded ever since the network went into operation in 2002. We processed the vast amounts of phase data yielded by the 107 digital seismic stations between 2002~2007 using Wadati method. In order to improve the precision and stability of shear and compressional wave velocities (vP/vS) calculation, we impose a number of restrictions on the computation environment and condition, e.g., the earthquakes are densely concentrated, selected stations are limited in range, the number of stations in- volved in the computation is larger than 5 and linear fitting features high precision and small error. Under these restrictions, the study shows that vP/vS in and around Wen’an and Tangshan underwent a normal-low-normal proc- ess one year before Wen’an earthquake, vP/vS became obviously low and the low ratio lasted for about one year, meanwhile, little variation of vP/vS was seen in Xingtai, northwest of Beijing, southwest of Beijing, Beijing-Tianjin and Beijing; after the quake, the vP/vS returned normal in Wen’an and Tangshan. Error and stability analysis of the calculated result for vP/vS shows it is convincible that anomaly appeared in and around Wen’an and Tangshan be- fore Wen’an earthquake.
基金supported by the projects of the Northwestern Polytechnical University(No.G2021KY05103)the Natioanl Key Laboratory of Science and Technology on Aerodynamic Design and Research(No.614220121030101)+2 种基金the Key Laboratory of Icing and Anti/De-icing of China Aerodynamics Research and Development Center(No.IADL20210302)the Spanish Government(Nos.FIS 2016-77849-R and PID2020114043GB-I00),the Catalan Government(No.2017-2017-SGR00785)the Barcelona Supercomputing Centre(Nos.FI2017-2-002,FI-2017-3-0009,and FI-2016-3-0038)。
文摘We investigate the flow inside a 2D square cavity driven by the motion of two mutually facing walls independently sliding at different speeds.The exploration,which employs the lattice Boltzmann method(LBM),extends on previous studies that had the two lids moving with the exact same speed in opposite directions.Unlike there,here the flow is governed by two Reynolds numbers(Re_(T),Re_(B))associated to the velocities of the two moving walls.For convenience,we define a bulk Reynolds number Re and quantify the driving velocity asymmetry by a parameterα.Parameterαhas been defined in the rangeα∈[-π4,0]and a systematic sweep in Reynolds numbers has been undertaken to unfold the transitional dynamics path of the two-sided wall-driven cavity flow.In particular,the critical Reynolds numbers for Hopf and NeimarkSacker bifurcations have been determined as a function ofα.The eventual advent of chaotic dynamics and the symmetry properties of the intervening solutions are also analyzed and discussed.The study unfolds for the first time the full bifurcation scenario as a function of the two Reynolds numbers,and reveals the different flow topologies found along the transitional path.
文摘A computational investigation of the mean flow field of turbulent rectangular jets issuing into a narrow channel crossflow is presented. The length of the jet slot spans more than 55% of the crossflow channel bed, leaving a small clearance between the jet edge and sidewalls. A finite volume code employing the standard k-εmodel is used to predict the mean, three-dimensional flow field. The mean flow field is investigated for two velocity ratios (6 and 9). Important flow features, such as the formation of different vortical structures and their characteristics owing to different values of the velocity ratio, are discussed. Some predicted results are compared with the experimental data reported in the literature. The predicted mean and turbulent flow properties are shown to be in good agreement with the experimental data.
基金The National Natural Science Foundation of China,National High Technology Research and Development Program of China,The Research Innovation Program for College Graduates of Jiangsu Province,The Excellent Doctoral Dissertation Foundation of Southeast University
文摘A new method based on human-likeness assessment and optimization concept to solve the problem of human-like ma- nipulation planning for articulated robot is proposed in this paper. This method intrinsically formulates the problem as a con- strained optimization problem in robot configuration space. The robot configuration space is divided into different subregions by human likeness assessment. A widely used strategy, Rapid Upper Limb Assessment (RULA) in applied ergonomics, is adopted here to evaluate the human likeness of robot configuration. A task compatibility measurement of the robot velocity transmission ratio along a specified direction is used as the target function for the optimization problem. Simple illustrative examples of this method applied to a two Degree of Freedom (DOF) planar robot that resembles the upper limb of a human are presented. Further applications to a humanoid industrial robot SDA10D are also presented. The reasonable planning results for these applications assert the effectiveness of our method.
文摘This paper presents the results of an ongoing investigation into transient pressure pulses using Shan- non entropy. Pressure fluctuations (produced by gas-solid two-phase flow during fluidized dense-phase conveying) are recorded by pressure transducers installed at strategic locations along a pipeline. This work validates previous work on identifying the flow mode from pressure signals (Mittal, Mallick, & Wypych, 2014). Two different powders, namely fly ash (median particle diameter 45 μm, particle den- sity 1950 kg/m3. loosely poured bulk density 950 kg/m3) and cement (median particle diameter 15 p,m, particle density 3060 kg/m3, loosely poured bulk density 1070 kg/m3), are conveyed through different pipelines (51 mm I.D. × 70 m length and 63 mm I.D. × 24 m length). The transient nature of pressure fluc- tuations (instead of steady-state behavior) is considered in investigating flow characteristics. Shannon entropy is found to increase along straight pipe sections for both solids and both pipelines. However, Shannon entropy decreases after a bend. A comparison of Shannon entropy among different ranges of superficial air velocity reveals that high Shannon entropy corresponds to very low velocities (i.e. 3-5 m/s) and very high velocities (i.e. 11-14 m/s) while low Shannon entropy corresponds to mid-range velocities (i.e. 6-8 m/s).
文摘Results are presented of an ongoing investigation into modeling friction in fiuidized dense-phase pneumatic transport of bulk solids. Many popular modeling methods of the solids friction use the dimen- sionless solids loading ratio and Froude number. When evaluated under proper scale-up conditions of pipe diameter and length, many of these models have resulted in significant inaccuracy. A technique for modeling solids friction has been developed using a new combination of dimensionless numbers, volu- metric loading ratio and the ratio of particle free settling velocity to superficial conveying air velocity, to replace the solids loading ratio and Froude number. The models developed using the new formalism were evaluated for accuracy and stability under significant scale-up conditions for four different prod- ucts conveyed through four different test rigs (subject to diameter and length scale-up conditions). The new model considerably improves predictions compared with those obtained using the existing model, especially in the dense-phase region. Whereas the latter yields absolute average relative errors varying between 10% and 86%, the former yielded results with errors from 4% to 20% for a wide range of scale-up conditions. This represents a more reliable and narrower range of prediction that is suitable for industrial scale-up requirements.