An Intelligent Cluster Verification Model Using WSN to Avoid Close Proximity and Control Outbreak of Pandemic in a Massive Crowd

Assemblage at public places for religious or sports events has become an integral part of our lives.These gatherings pose a challenge at places where fast crowd verification with social distancing(SD)is required,especially during a pandemic.Presently,verification of crowds is carried out in the form of a queue that increases waiting time resulting in congestion,stampede,and the spread of diseases.This article proposes a cluster verification model(CVM)using a wireless sensor network(WSN),single cluster approach(SCA),and split cluster approach(SpCA)to solve the aforementioned problem for pandemic cases.We show that SD,cluster approaches,and verification by WSN can overcome the management issues by optimizing the cluster size and verification time.Hence,our proposed method minimizes the chances of spreading diseases and stampedes in large events such as a pilgrimage.We consider the assembly points in the annual pilgrimage to Makkah Al-Mukarmah and Umrah for verification using Contiki/Cooja tool.We compute results such as verified cluster members(CMs)to define cluster size,success rate to determine the best success rate,and verification time to determine the optimal verification time for various scenarios.We validate ourmodel by comparing the results of each approach with the existing model.Our results showthat the SpCAwith SD is the best approach with a 96% success rate and optimization of verification time as compared to SCA with SD and the existing model.

Analytical Solutions for Testing of Baroclinic and Wind-Driven Three-Dimensional Hydrodynamic Models

It is always a challenge for a model developer to verify a three-dimensional hydrodynamic model, especially for the baroclinic term over variable topography, due to a lack of observational data sets or suitable analytical solutions. In this paper, exact solutions for the periodic forcing by surface heat flux and wind stress are given by solving the linearized equations of motion neglecting the rotation, advection and horizontal diffusion terms. The temperature at the bottom is set to a prescribed periodic value and a slip condition on flow is enforced at the bottom. The geometry of the quarter annulus, which has been extensively studied for two- and three-dimensional analytical solutions of unstratified water bodies, is used with a general power law variation of the bottom slope in the radial direction and is constant in the azimuthal direction. The analytical solutions are derived in a cylindrical coordinate system, which describes the three-dimensional fluid field in a Cartesian coordinate system. The results presented in this paper should provide a foundation for studying and verifying the baroclinic term over a varied topography in a three-dimensional numerical model.

Dynamic business process modeling and verification for inter-organizational collaboration

To achieve an on-demand and dynamic composition model of inter-organizational business processes, a new approach for business process modeling and verification is introduced by using the pi-calculus theory. A new business process model which is multi-role, multi-dimensional, integrated and dynamic is proposed relying on inter-organizational collaboration. Compatible with the traditional linear sequence model, the new model is an M x N multi-dimensional mesh, and provides horizontal and vertical formal descriptions for the collaboration business process model. Finally, the pi-calculus theory is utilized to verify the deadlocks, livelocks and synchronization of the example models. The result shows that the proposed approach is efficient and applicable in inter-organizational business process modeling.

Modeling and Verification of Aircraft Takeoff Through Novel Quantum Nets

The formal modeling and verification of aircraft takeoff is a challenge because it is a complex safety-critical operation.The task of aircraft takeoff is distributed amongst various computer-based controllers,however,with the growing malicious threats a secure communication between aircraft and controllers becomes highly important.This research serves as a starting point for integration of BB84 quantum protocol with petri nets for secure modeling and verification of takeoff procedure.The integrated model combines the BB84 quantum cryptographic protocol with powerful verification tool support offered by petri nets.To model certain important properties of BB84,a new variant of petri nets coined as Quantum Nets are proposed by defining their mathematical foundations and overall system dynamics,furthermore,some important system properties are also abstractly defined.The proposed QuantumNets are then applied for modeling of aircraft takeoff process by defining three quantum nets:namely aircraft,runway controller and gate controller.For authentication between quantum nets,the use of external places and transitions is demonstrated to describe the encryptiondecryption process of qubits stream.Finally,the developed takeoff quantum network is verified through simulation offered by colored petri-net(CPN)Tools.Moreover,reachability tree(RT)analysis is also performed to have greater confidence in feasibility and correctness of the proposed aircraft takeoff model through the Quantum Nets.

Modeling of cognitive framework in time-stressed decision making

An approach for modeling a human cognitive framework in time-stressed decision making is presented. The recognitive and metacognitive processes that represent the cognitive framework are modeled by the colored Petri nets （CPNs）. A structural and behavioral analysis method is adopted to obtain the static and dynamic property used to verify the CPNs model of the cognitive framework. Finally, an example from the command and control radar recognition system is used to evaluate the feasibility and availability of the CPNs model adopted in practical systems.

CHECKING CONSISTENCY IN INFORMATION MODELS BY USING CONSTRAINT PROGRAMMING

This paper addresses the issue of checking consistency in information models. A method based on constraint programming is proposed for identifying inconsistency or proving consistency in information models. The system described here checks information models written in the ISO standard information modelling language EXPRESS. EXPRESS is part of the ISO STEP standard used in the manufacturing and process industries. This paper describes the checking procedure, including EXPRESS model formalization, constraint satisfaction problem (CSP) derivation from the formalized model and satisfaction checking of the derived CSPs. This paper shows a new domain in which constraint programming can be exploited as model verification and validation.

Modeling stress wave propagation in rocks by distinct lattice spring model

In this paper, the ability of the distinct lattice spring model （DLSM） for modeling stress wave propagation in rocks was fully investigated. The influence of particle size on simulation of different types of stress waves （e.g. one-dimensional （1D） P-wave, 1D S-wave and two-dimensional （2D） cylindrical wave） was studied through comparing results predicted by the DLSM with different mesh ratios （It） and those obtained from the corresponding analytical solutions. Suggested values of lr were obtained for modeling these stress waves accurately. Moreover, the weak material layer method and virtual joint plane method were used to model P-wave and S-wave propagating through a single discontinuity. The results were compared with the classical analytical solutions, indicating that the virtual joint plane method can give better results and is recommended. Finally, some remarks of the DLSM on modeling of stress wave propagation in rocks were provided.

Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification

Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.

Active Profiling and Polishing Model and Validation Based on Rotor Spiral Groove

When a spiral groove is formed using superplastic molding, precision casting, additive manufacturing, or other non?mechanical processing technology, it is diffcult to meet the molding precision required for direct use, and the surface quality and accuracy of the shape need to be improved through a finishing process. In view of the poor reachability of the current tool?based polishing process, a tool?less polishing method using free?abrasive grains for complex spiral grooves is proposed. With this method, by controlling the movement of the workpiece, the design basis and relative motion of the abrasive particles along a helical path remain consistent, resulting in a better polishing profile. A spiral groove of a revolving body is taken as the research object; the influence of the installation method and the position of the parts, as well as the effect of the rotational speed of the abrasive ball on its relative motion along a helical trajectory, are studied, and the polishing cutting process of an abrasive ball is reasonably simplified. A consistent math?ematical model of the trajectory of an abrasive ball relative to the design helix is constructed. The grooved drum parts are verified through a polishing experiment. The spiral groove of the revolving body is modified and polished. Experiments show that the process not only corrects the shape a spiral groove error, but also reduces the surface roughness of a spiral groove. This study provides a theoretical basis for achieving free?abrasive, tool?free polishing.

An ice-ocean model study to explore climate change mechanisms in comparison with interannual-to-decadal variability of geochemical tracers

One way to identify the mechanisms that are crucial to Arctic climate change is to use existing data that exhibit interannual-to-decadal variability in the sea ice and ocean interior due to atmospheric forcing. Since around 1960s, valuable geochemical data of the ocean interior, together with atmospheric and sea ice data, have been analyzed and examined in a coupled ice-ocean model with an idealized configuration of the Arctic Basin. This is fundamentally driven by negative salt flux, in addition to atmospheric circulation and cooling. This strategy has a clear advantage over more sophisticated models with higher resolution that require extensive data collections for verification. Around 1990, the dominant atmospheric mode shifted from the Northern Annular Mode （NAM） to the Arctic Dipole Mode （ADM）. The variability of sea ice cover was explained by these two modes sequentially and reproduced in the model. In particular, the geochemical fields indicated a movement of the Transpolar Drift Stream due to the NAM and an oscillation of the Pacific water between the Atlantic and Pacific sides due to the ADM. Both these features were reproduced reasonably well by the oceanic tracers in the model, including the time lags of about one third of the oscillation periods. Thus, this strategy can suggest methods and locations for monitoring oceanographic responses to Arctic climate change.

Symbolic Model Checking and Analysis for E-Commerce Protocol

A new approach is proposed for analyzing non-repudiation and fairness of e-commerce protocols. The authentication e-mail protocol CMP1 is modeled as finite state machine and analyzed in two vital aspects- non-repudiation and fairness using SME. As a result, the CMP1 protocol is not fair and we have improved it. This result shows that it is effective to analyze and check the new features of e-commerce protocols using SMV model checker.

Cross Spectral Estimation and Its Application in Missile Systems

A new method based on cross-spectrum estimation for the verification and validation of computer simulation models is expounded in accordance with the characteristics of missile systems. The new method can expose the differences between two time processes in several aspects and can also give quantitative analysis results about the statistical consistence between them. An application to an actual anti-tank missile system simulation is presented and the calculated results confirm the effectiveness of the method. The approach can also be employed to verify the simulation models of other dynamic systems.

Rate Control for MPEG-4 Bit Stream

For a very long time video processing dealt exclusively with fixed-rate sequences of rectangular shaped images. However, interest has been recently moving toward a more flexible concept in which the subject of the processing and encoding operations is a set of visual elements organized in both time and space in a flexible and arbitrarily complex way. The moving picture experts group (MPEG- 4) standard supports this concept and its verification model (VM) encoder has adopted scalable rate control (SRC) as the rate control scheme, which is based on the spatial domain and compatible with constant bit rate (CBR) and variable bit rate (VBR). In this paper,a new rate control algorithm based on the DCT domain instead of the pixel domain is presented. More-(over), macroblock level rate control scheme to compute the quantization step for each macroblock has been adopted. The experimental results show that the new algorithm can achieve a much better result than the original one in both peak signal-to-noise ratio (PSNR) and the coding bits, and that the new algorithm is more flexible than test model 5 (TM5) rate control algorithm.

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.

Multi-body dynamics modeling and test of an articulated steering half-track tractor

With the benefits of small turning radius and high trafficability, the articulated steering half-track tractor had been widely utilized in orchard and small spaced farmland. To study the dynamic performance of the articulated steering half-track tractor and provide a model basis for studying the path tracking control, an accurate multi-body dynamic model of the tractor was required. In this study, the crucial parameters in the dynamic model construction of the tractor were investigated. Firstly, the topology model of the components of the half-track tractor was built by RecurDyn, in which the movement subs and driver functions were given. Secondly, considering the difference of dynamic characteristic of the articulated steering tractor with respect to different pavement hardnesses, the soft and hard pavement models were constructed by employing the harmonic superposition method. Finally, the simulations of the half-track tractor under straight-line and swerve had been conducted on the two types of pavements, and the simulation results were compared with the experimental and theoretical results. The results indicated that the average speed error of the dynamic model on hard pavement and farmland soft pavement were 2.7% and 2.1% compared with the real tractor tests. At the same time, the straight-line driving offset errors of the dynamic model on the two pavements were 1.6% and 3.8% for the front wheels and the rear wheels offset errors were 3.9% and 2.4%, respectively. Furthermore, the turning radius error under front wheel steering was 8.2% and the error under articulated steering was 5.3%. It is proved that the established dynamic model had high accuracy, which provides an efficient approach to analyze the dynamic features of the half-track tractor.

An action-based Markov chain modeling approach for predicting the window operating behavior in office spaces

Reliable energy and performance prediction for building design and planning is important for newly-designed or retrofitted buildings.Window operating behavior has an important influence on the ventilation and energy consumption of these buildings under different realistic scenarios.Therefore,quantitatively describing this behavior and constructing a prediction model are important.In this work,an action-based Markov chain modeling approach for predicting window operating behavior in office spaces was proposed.Two summer measurement data(2016 and 2018)were used to verify the accuracy and validity of the modeling approach.The opening rate,outdoor temperature,time distribution,and on-off curve were proposed as four inspection standards.This study also compared the prediction performance between the action-based Markov chain modeling approach with the state-based Markov chain modeling approach,which is the most popular modeling approach to model occupant window operating behavior.This study proved that the yearly variation of occupants’behavior performed a form of action that remained unchanged during a certain period.Meanwhile,the results also proved that the action-based Markov chain modeling approach can reflect the actual window operating behavior accurately within an open-plan office,which is a beneficial supplement for energy-consumption simulation software in a window-state prediction module.The state-based Markov chain modeling approach showed better stability and accuracy in terms of the opening rate,whereas the action-based Markov chain modeling approach showed good consistency with the measurement data in the on-off curves and in situations with little data.For the on-off curves,the accuracy of action-based modeling approach in the prediction of window open-state is 20%higher.

Analysis of a Heavy Rainfall Event over Beijing During 21-22 July2012 Based on High Resolution Model Analyses and Forecasts

The heaviest rainfall over 61 yr hit Beijing during 21-22 July 2012.Characterized by great rainfall amount and intensity,wide range,and high impact,this record-breaking heavy rainfall caused dozens of deaths and extensive damage.Despite favorable synoptic conditions,operational forecasts underestimated the precipitation amount and were late at predicting the rainfall start time.To gain a better understanding of the performance of mesoscale models,verification of high-resolution forecasts and analyses from the WRFbased BJ-RUCv2.0 model with a horizontal grid spacing of 3 km is carried out.The results show that water vapor is very rich and a quasi-linear precipitation system produces a rather concentrated rain area.Moreover,model forecasts are first verified statistically using equitable threat score and BIAS score.The BJ-RUCv2.0forecasts under-predict the rainfall with southwestward displacement error and time delay of the extreme precipitation.Further quantitative analysis based on the contiguous rain area method indicates that major errors for total precipitation（〉 5 mm h^（-1）） are due to inaccurate precipitation location and pattern,while forecast errors for heavy rainfall（〉 20 mm h^（-1）） mainly come from precipitation intensity.Finally,the possible causes for the poor model performance are discussed through diagnosing large-scale circulation and physical parameters（water vapor flux and instability conditions） of the BJ-RUCv2.0 model output.

Optimization of a Cu CMP process modeling parameters of nanometer integrated circuits

A copper chemical mechanical polishing （Cu CMP） process is reviewed and analyzed from the view of chemical physics. Three steps Cu CMP process modeling is set up based on the actual process of manufacturing and pattern-density-step-height （PDSH） modeling from MIT. To catch the pattern dependency, a 65 nm testing chip is designed and processed in the foundry. Following the model parameter extraction procedure, the model parameters are extracted and verified by testing data from the 65 nm testing chip. A comparison of results between the model predictions and test data show that the former has the same trend as the latter and the largest deviation is less than 5 nm. Third party testing data gives further evidence to support the great performance of model parameter optimization. Since precise CMP process modeling is used for the design of manufacturability （DFM） checks, critical hotspots are displayed and eliminated, which will assure good yield and production capacity of IC.

A formal model for plastic human computer interfaces

The considerable and significant progress achieved in the design and development of new interaction devices between man and machine has enabled the emergence of various powerful and efficient input and/or output devices. Each of these new devices brings specific interaction modes. With the emergence of these devices, new interaction techniques and modes arise and new interaction capabilities are offered. New user interfaces need to be designed or former ones need to evolve. The design of so called plastic user interfaces contributes to handling such evolutions. The key requirement for the design of such a user interface is that the new obtained user interface shall be adapted to the application and have, at least, the same behavior as the previous （adapted） one. This paper proposes to address the problem of user interface evolution due to the introduction of new interaction devices and/or new interaction modes. More, precisely, we are interested by the study of the design process of a user interface resulting from the evolution of a former user interface due to the introduction of new devices and/or new interaction capabilities. We consider that interface behaviors are described by labelled transition systems and comparison between user interfaces is handled by an extended definition of the bi-simulation relationship to compare user interface behaviors when interaction modes are replaced by new ones.

A Method to Detect the Abnormal Phenomenonin PVM Program Based on Petri Net

The parallel program verification can be divided into two aspects, the communicationand computation verification. In this paper, we mainly study the communication verification. First,we establish the Petri net specification for communication functions and basic statements of PVM;then, we give the steps of designing program verification model and abstract the abnormal phenomenonthat users often meet in the PVM parallel program into the characters of Petri net (including soleinformation, insufficient information, deadlock and livelock); finally, we give some detection algorithmto help users to eliminate these errors. In order to decrease the complexity of verification, we proposeseveral rules to simple the verification model.