Karst subzone division in vertical cycle zone and its significance

Vertical cycle karst zone has been studied for more than 100 years, however karst subzones in the zone have never been divided and affected depth of CO2 from rainwater in the zone has never been studied. On the basis of field observation, survey and chemical analysis, the difference of karst processes indicated by CaCO3 and pH values in fine and loose sedimentary strata as well as limestone strata, and the vertical cycle zone ascertained by predecessors can be divided into three subzones, that is, the upper first subzone, characterized by unsaturated water solution and strong dissolution processes, the middle second subzone, characterized by supersaturated water solution and precipitation, and the lower third subzone, characterized by unstable water solution and weak dissolution or weak precipitation. The three subzones can indicate the vertical CO2 cycle. In fine and loose sediment strata, the bottom of the first subzone is the lower boundary strongly influenced by CO2 from rainwater, soil and air; all CO2 from rainwater, soil and air is almost exhausted in the second subzone. In the early developmental period of karst process in limestone strata, karst funnels and vertical caves do not form, vertical seeping of rainwater and soil water is very slow, and CO2 from soil, rainwater and air almost can reach the third subzone, but in the middle and late developmental periods, karst funnels and vertical caves occur, CO2 from soil, rainwater and air can reach deep seasonal change zone and horizontal cycle zone and quicken development of karst morphology. Deep karst morphology near groundwater level under vertical cycle zone develops better in the middle and late periods of karst process.

Spatial variations of Pb in the vertical zone of the soil-plant system in the Changbai Mountain National Nature Reserve

The characteristics of vertical and horizontal variations of lead element(Pb) in soil plant system of vertical zone in Changbai Mountain National Nature Reserve(CNNR) were studied. The results showed that Pb concentrations in soils of vertical zone are all above 25 mg/kg, and the average Pb concentration of each soil zone negatively correlates its degree of variation, i.e. brown coniferous forest soil zone has the lowest average Pb concentration of four soil zones, and the highest horizontal variation; however, mountain soddy forest soil has the highest average Pb concentration, and the lowest horizontal variation; the average concentration of plant Pb of each plant zone is lower than the worldwide average level of Pb in plant(Clarke), respectively, and plant Pb content order is consistent with soil Pb content order, but their horizontal variations are different from those in soil zones, the variation of mountain tundra forest zone is highest, but Betula ermanii forest zone the lowest. Vertical variation of plant Pb is obviously higher than that in soils with variation coefficient of 89.76%; the enrichment capability of plant for Pb is depended on the plant types and the different organs of plant; parent material and parent rock, pH values, soil organic matter and soil particle fraction etc. are the main factors influencing variations of Pb content in soil plant system of vertical zone in CNNR.

Vertical deformation and tectonic activity in Tianjin area

Vertical deformation in Tianjin area during 1992 -2008 was calculated from leveling data. The effect of large surface subsidence caused by extensive groundwater pumping was removed by fitting the data along each survey line with a polynomial function. The results are fitted with crustal blocks individually in this area. Vertical deformation rates are mapped, vertical rates of the main fault zones were calculated, and the activities of the blocks and fault zones were investigated. The observed vertical deformation shows that some of the blocks tilted and some blocks rose or subsided as a whole. The vertical rates at fault zones in the area vary within the range of 0. 13-0. 48 mm/a,with an average value of 0.29 mm/a.

Morphological Characteristics and Environmental Implications of Phytoliths in Topsoils from Different Vegetation Zones on Northern Slope of Changbai Mountains,China

The Changbai Mountains,located in the temperate monsoon climate zone of East Asia,is an ideal loca-tion for the research on timberline response to global changes.In this study,the topsoils were collected from different vertical vegetation zones on the northern slope of the Changbai Mountains,Northeast China in August 2009,and phytoliths in the soil samples were extracted by using wet oxidation method and identified with Motic 2.0 microscope in laboratory.The results show that phytoliths are abundant in the topsoils of the study area.The herbal phytoliths are primarily composed of elongated,tooth-shaped,point-shaped and hat-shaped phytoliths,as well as a small amount of fan-shaped and square-shaped ones.The elongated,tooth-shaped,point-shaped and hat-shaped phytoliths are representative of cold climate,while fan-shaped and square-shaped ones are representative of warm and humid climate.In the conifer broadleaved mixed forest zone,coniferous forest zone and broadleaf forest zone,there are close correlations between vegetation and woody phytoliths in the topsoils,indicating that the woody plants of a region can be reconstructed from the woody phytolith assemblages in the topsoils.Meanwhile,the topsoil phytolith assemblages can also be used to reconstruct the understory herbs effectively.The phytolith assemblages in the topsoils of the forest community and herbal community differ significantly,which can help indicate the historical location of the timberline.

Paleotectonic residual strain energy in Southwest China

Based on the orthotropic elastic theory of rock masses, the X-ray method was used to measure the distribution of macro-residual strain energy density along a depth profile,using core samples taken from 47 large-aperture deep boreholes in four regions of Southwest China： the Longmenshan, Anninghe, Honghe, and Xianshuihe fault zones.Then, the vertical gradients of the macro-residual strain energy density and the macroresidual strain energy contained in high-energy cuboid block segments along each fault zone were determined. The results demonstrate that the macro-residual strain energy stored at shallow levels in the rock mass in these fault zones may be partly responsible for generating many large earthquakes and may explain why the large earthquakes in this region are typically shallow.

Rupture area analysis of the Ecuador (Musine) Mw = 7.8 thrust earthquake on April 16, 2016, using GOCE derived gradients

The Ecuador Mw - 7.8 earthquake on April 16, 2016, ruptured a nearly 200 km long zone along the plate interface between Nazca and South American plates which is coincident with a seismic gap since 1942, when a Mw - 7.8 earthquake happened. This earthquake occurred at a margin characterized by moderately big to giant earthquakes such as the 1906 （Mw 8.8）. A heavily sedimented trench explains the abnormal lengths of the rupture zones in this system as inhibits the role of natural barriers on the propagation of rupture zones. High amount of sediment thickness is associated with tropical climates, high erosion rates and eastward Pacific dominant winds that provoke orographic rainfalls over the Pacific slope of the Ecuatorian Andes. Offshore sediment dispersion off the oceanic trench is controlled by a close arrangement of two aseismic ridges that hit the Costa Rico and South Ecuador margin respectively and a mid ocean ridge that separates the Cocos and Nazca plate trapping sediments. Gravity field and Ocean Circulation Explorer （GOCE） satellite data are used in this work to test the possible relationship between gravity signal and earthquake rupture structure as well as registered aftershock seismic activity. Reduced vertical gravity gradient shows a good correlation with rupture structure for certain degrees of the harmonic expansion and related depth of the causative mass; indicating, such as in other analyzed cases along the subduction margin, that fore-arc structure derived from density heterogeneities explains at a certain extent propagation of the rupture zones. In this analysis the rupture zone of the April 2016 Ecuador earthquake developed through a relatively low density zone of the fore-arc sliver. Finally, aftershock sequence nucleated around the area of maximum slips in the rupture zone, suggesting that heterogeneous density structure of the fore-arc determined from gravity data could be used in forecasting potential damaged zones associated with big ruptures along the subduction border.