This research used confocal laser scanning mi-croscopy to examine the initiation and connection of vessel elements in Arabidopsis thaliana (L.) Heynh seedlings. The results indicated that vessel elements differentiate...This research used confocal laser scanning mi-croscopy to examine the initiation and connection of vessel elements in Arabidopsis thaliana (L.) Heynh seedlings. The results indicated that vessel elements differentiated first in the lower portion of cotyledon-node zone (CNZ) 2 h after germination, and then extended downwards to the hypocotyl and root and upwardly to the middle portion of CNZ. 10 h after germination, vessel elements developed in the lower portion of cotyledon blade, the second initiating site, con-necting gradually with that initiated in cotyledon node and forming pinnate-marginal venation. The connection of vessel elements occurred between the upper portions of CNZ and epicotyl-shoot zone 7 d after germination. By then, the com-plete connection of vessel elements in the axial and lateral organs had formed.展开更多
Shell structure is widely used in industrial applications, such as in machinery, aerospace, ship and building fields, as well as containers of pressurized chemicals or liquefied natural gas. Graphite/epoxy composites ...Shell structure is widely used in industrial applications, such as in machinery, aerospace, ship and building fields, as well as containers of pressurized chemicals or liquefied natural gas. Graphite/epoxy composites has advantages of light weight, high strength, corrosion resistance, low expansion, low shrin kage and are often used in the form of composite pressure vessel for various engineering applications. In this study, the stress distributions of composite pressure vessel were analyzed. The finite element code ANSYS was used in analysis, in which the eight-node element SHELL 281 was adopted. The internal pressure 20 MPa, as in container of compressed natural gas, was applied inside the symmetrical cross-ply graphite/epoxy composite pressure vessel. The finite element model was established with suitable mesh size and boundary conditions. The stress distributions are discussed for the composite pressure vessel, especially for the inner two layers at the junction of semis pherical part. The Tsai-Hill criterion was used to assess the failure of composite pressure vessel.展开更多
This paper proposes a theoretical method using finite element analysis(FEA) to calculate the plastic collapse loads of pressure vessels under internal pressure,and compares the analytical methods according to three cr...This paper proposes a theoretical method using finite element analysis(FEA) to calculate the plastic collapse loads of pressure vessels under internal pressure,and compares the analytical methods according to three criteria stated in the ASME Boiler Pressure Vessel Code. First,a finite element technique using the arc-length algorithm and the restart analysis is developed to conduct the plastic collapse analysis of vessels,which includes the material and geometry non-linear properties of vessels. Second,as the mechanical properties of vessels are assumed to be elastic-perfectly plastic,the limit load analysis is performed by em-ploying the Newton-Raphson algorithm,while the limit pressure of vessels is obtained by the twice-elastic-slope method and the tangent intersection method respectively to avoid excessive deformation. Finally,the elastic stress analysis under working pressure is conducted and the stress strength of vessels is checked by sorting the stress results. The results are compared with those obtained by experiments and other existing models. This work provides a reference for the selection of the failure criteria and the calculation of the plastic collapse load.展开更多
Sealing analysis of sealing system in reactor pressure vessels is relevant with multiple nonlinear coupled-field effects, so even large-scale commercial finite element software cannot finish the complicated analysis. ...Sealing analysis of sealing system in reactor pressure vessels is relevant with multiple nonlinear coupled-field effects, so even large-scale commercial finite element software cannot finish the complicated analysis. A finite element method of 3D transient coupled thermo-elastic-plastic contact sealing analysis for reactor pressure vessels is presented, in which the surface nonlinearity, material nonlinearity, transient heat transfer nonlinearity and multiple coupled effect are taken into account and the sealing equation is coupling solved in iterative procedure. At the same time, a computational analysis program is developed, which is applied in the sealing analysis of experimental reactor pressure vessel, and the numerical results are in good coincidence with the experimental resuits. This program is also successful in analyzing the practical problem in engineering.展开更多
The characteristic properties of shell element with similar shapes are used to generate a so-called super element for the analysis of the crack problems for cylindrical pressure vessels. The formulation is processed b...The characteristic properties of shell element with similar shapes are used to generate a so-called super element for the analysis of the crack problems for cylindrical pressure vessels. The formulation is processed by matrix condensation without the involvement of special treatment. This method can deal with various singularity problems and it also presents excellent results to crack problems for cylindrical shell. Especially,the knowledge of the kind of singular order is not necessary in super element generation; it is very economical in terms of computer memory and programming. This method also exhibits versatility to solve the problem of kinked crack at cylindrical shell.展开更多
The visualization and evaluation of fruit vascular bundles in grape are indispensable for understanding the development and growth of the fruit. The vascular bundles in grape are as thin as human hair, and strongly ad...The visualization and evaluation of fruit vascular bundles in grape are indispensable for understanding the development and growth of the fruit. The vascular bundles in grape are as thin as human hair, and strongly adhere to flesh cells, making it difficult to isolate individual intact vessel elements. Currently there is little information about methods to characterize grape vascular tissue. In this study, we describe an easy and effective technique to visualize the xylem cell structure of the ‘Red Globe' grape(Vitis L.). The intact vascular bundles of the grape were isolated through enzymatic degradation of flesh cells by hydrolases which were effective in removing flesh cells from vascular bundles. This enabled the illustration of the fine surface structure of vessel elements and their arrangement in the vascular bundles of the grape. This modified method to separate the vascular bundles into individual vessel elements was more effective than former methods of manually shaking to isolate individual vessels. Clear images of xylem vessel arrangement and structural characteristics of individual vessel element were acquired by light microscopy(BX51, Olympus, Tokyo, Japan), transmission electron microscopy(Tecnai 12, Philips, Netherlands) and scanning electron microscopy(GeminiSEM 300, Carl Zeiss, Germany). In addition, the 3D structure of vessel elements was observed using confocal laser scanning microscopy(Zeiss: model: LSM-880, Oberkochen, Germany). The imaging techniques for visualizing and analyzing the structure of xylem vessels in grape described in this study are an improvement of past methods. An effective method to isolate grape vascular bundles from flesh cells was also developed, which enables the imaging of the fine surface structure of vessel elements and their arrangement in grape vascular bundles. By adjusting the process of maceration of vascular bundles, an easy and effective method was developed to gently disrupt the plant tissue and isolate individual vessel elements. These improved techniques are suitable to observe the intact morphology of vascular bundles in the grape, improve experimental efficiency and accelerate new discoveries on the anatomical structure of the grape.展开更多
The neutron shielding component of ITER （International Thermonuclear Experimental Reactor） vacuum vessel is a kind of structure resembling a wall in appearance. A FE （finite element） model is set up by using ANSYS...The neutron shielding component of ITER （International Thermonuclear Experimental Reactor） vacuum vessel is a kind of structure resembling a wall in appearance. A FE （finite element） model is set up by using ANSYS code in terms of its structural features. Static analysis, thermal expansion analysis and dynamic analysis are performed. The static results show that the stress and displacement distribution are allowable, but the high stress appears in the junction between the upper and lower parts. The modal analysis indicates that the biggest deformation exists in the port area. Through modal superposition, the single-point response has been found with the lower rank frequency of the acceleration seismic response spectrum. But the deformation and the stress values are within the permissible limit. The analysis results would benefit the work in the next step and provide some reference for the implementation of the engineering plan in the future.展开更多
As the idea of simulated annealing (SA) is introduced into the fitness function, an improved genetic algorithm (GA) is proposed to perform the optimal design of a pressure vessel which aims to attain the minimum weigh...As the idea of simulated annealing (SA) is introduced into the fitness function, an improved genetic algorithm (GA) is proposed to perform the optimal design of a pressure vessel which aims to attain the minimum weight under burst pressure con- straint. The actual burst pressure is calculated using the arc-length and restart analysis in finite element analysis (FEA). A penalty function in the fitness function is proposed to deal with the constrained problem. The effects of the population size and the number of generations in the GA on the weight and burst pressure of the vessel are explored. The optimization results using the proposed GA are also compared with those using the simple GA and the conventional Monte Carlo method.展开更多
基金This Tesearch was supported by National Natural Science Foundation of China(Grant No.30370084)Doctorate Vesting Point Foundation of the Education Committee of China(Grant No.20020019034)Laboratory of Systematic and Evolutionary Botany,Institute of Botany,Chinese Academy of Sciences.
文摘This research used confocal laser scanning mi-croscopy to examine the initiation and connection of vessel elements in Arabidopsis thaliana (L.) Heynh seedlings. The results indicated that vessel elements differentiated first in the lower portion of cotyledon-node zone (CNZ) 2 h after germination, and then extended downwards to the hypocotyl and root and upwardly to the middle portion of CNZ. 10 h after germination, vessel elements developed in the lower portion of cotyledon blade, the second initiating site, con-necting gradually with that initiated in cotyledon node and forming pinnate-marginal venation. The connection of vessel elements occurred between the upper portions of CNZ and epicotyl-shoot zone 7 d after germination. By then, the com-plete connection of vessel elements in the axial and lateral organs had formed.
文摘Shell structure is widely used in industrial applications, such as in machinery, aerospace, ship and building fields, as well as containers of pressurized chemicals or liquefied natural gas. Graphite/epoxy composites has advantages of light weight, high strength, corrosion resistance, low expansion, low shrin kage and are often used in the form of composite pressure vessel for various engineering applications. In this study, the stress distributions of composite pressure vessel were analyzed. The finite element code ANSYS was used in analysis, in which the eight-node element SHELL 281 was adopted. The internal pressure 20 MPa, as in container of compressed natural gas, was applied inside the symmetrical cross-ply graphite/epoxy composite pressure vessel. The finite element model was established with suitable mesh size and boundary conditions. The stress distributions are discussed for the composite pressure vessel, especially for the inner two layers at the junction of semis pherical part. The Tsai-Hill criterion was used to assess the failure of composite pressure vessel.
基金Project (Nos. 2006BAK04A02-02 and 2006BAK02B02-08) supported by the National Key Technology R&D Program, China
文摘This paper proposes a theoretical method using finite element analysis(FEA) to calculate the plastic collapse loads of pressure vessels under internal pressure,and compares the analytical methods according to three criteria stated in the ASME Boiler Pressure Vessel Code. First,a finite element technique using the arc-length algorithm and the restart analysis is developed to conduct the plastic collapse analysis of vessels,which includes the material and geometry non-linear properties of vessels. Second,as the mechanical properties of vessels are assumed to be elastic-perfectly plastic,the limit load analysis is performed by em-ploying the Newton-Raphson algorithm,while the limit pressure of vessels is obtained by the twice-elastic-slope method and the tangent intersection method respectively to avoid excessive deformation. Finally,the elastic stress analysis under working pressure is conducted and the stress strength of vessels is checked by sorting the stress results. The results are compared with those obtained by experiments and other existing models. This work provides a reference for the selection of the failure criteria and the calculation of the plastic collapse load.
文摘Sealing analysis of sealing system in reactor pressure vessels is relevant with multiple nonlinear coupled-field effects, so even large-scale commercial finite element software cannot finish the complicated analysis. A finite element method of 3D transient coupled thermo-elastic-plastic contact sealing analysis for reactor pressure vessels is presented, in which the surface nonlinearity, material nonlinearity, transient heat transfer nonlinearity and multiple coupled effect are taken into account and the sealing equation is coupling solved in iterative procedure. At the same time, a computational analysis program is developed, which is applied in the sealing analysis of experimental reactor pressure vessel, and the numerical results are in good coincidence with the experimental resuits. This program is also successful in analyzing the practical problem in engineering.
基金Project (No. NSC-95-2221-E-167-002) supported by the National Science Council of Taiwan, China
文摘The characteristic properties of shell element with similar shapes are used to generate a so-called super element for the analysis of the crack problems for cylindrical pressure vessels. The formulation is processed by matrix condensation without the involvement of special treatment. This method can deal with various singularity problems and it also presents excellent results to crack problems for cylindrical shell. Especially,the knowledge of the kind of singular order is not necessary in super element generation; it is very economical in terms of computer memory and programming. This method also exhibits versatility to solve the problem of kinked crack at cylindrical shell.
基金supported by the National Natural Science Foundation of China (Grant Nos. 31872050 and 32102348)。
文摘The visualization and evaluation of fruit vascular bundles in grape are indispensable for understanding the development and growth of the fruit. The vascular bundles in grape are as thin as human hair, and strongly adhere to flesh cells, making it difficult to isolate individual intact vessel elements. Currently there is little information about methods to characterize grape vascular tissue. In this study, we describe an easy and effective technique to visualize the xylem cell structure of the ‘Red Globe' grape(Vitis L.). The intact vascular bundles of the grape were isolated through enzymatic degradation of flesh cells by hydrolases which were effective in removing flesh cells from vascular bundles. This enabled the illustration of the fine surface structure of vessel elements and their arrangement in the vascular bundles of the grape. This modified method to separate the vascular bundles into individual vessel elements was more effective than former methods of manually shaking to isolate individual vessels. Clear images of xylem vessel arrangement and structural characteristics of individual vessel element were acquired by light microscopy(BX51, Olympus, Tokyo, Japan), transmission electron microscopy(Tecnai 12, Philips, Netherlands) and scanning electron microscopy(GeminiSEM 300, Carl Zeiss, Germany). In addition, the 3D structure of vessel elements was observed using confocal laser scanning microscopy(Zeiss: model: LSM-880, Oberkochen, Germany). The imaging techniques for visualizing and analyzing the structure of xylem vessels in grape described in this study are an improvement of past methods. An effective method to isolate grape vascular bundles from flesh cells was also developed, which enables the imaging of the fine surface structure of vessel elements and their arrangement in grape vascular bundles. By adjusting the process of maceration of vascular bundles, an easy and effective method was developed to gently disrupt the plant tissue and isolate individual vessel elements. These improved techniques are suitable to observe the intact morphology of vascular bundles in the grape, improve experimental efficiency and accelerate new discoveries on the anatomical structure of the grape.
基金the National 973 program of China(No.2004CB720704)
文摘The neutron shielding component of ITER （International Thermonuclear Experimental Reactor） vacuum vessel is a kind of structure resembling a wall in appearance. A FE （finite element） model is set up by using ANSYS code in terms of its structural features. Static analysis, thermal expansion analysis and dynamic analysis are performed. The static results show that the stress and displacement distribution are allowable, but the high stress appears in the junction between the upper and lower parts. The modal analysis indicates that the biggest deformation exists in the port area. Through modal superposition, the single-point response has been found with the lower rank frequency of the acceleration seismic response spectrum. But the deformation and the stress values are within the permissible limit. The analysis results would benefit the work in the next step and provide some reference for the implementation of the engineering plan in the future.
基金Project (Nos. 2006BAK04A02-02 and 2006BAK02B02-08) sup-ported by the National Key Technology R&D Program, China
文摘As the idea of simulated annealing (SA) is introduced into the fitness function, an improved genetic algorithm (GA) is proposed to perform the optimal design of a pressure vessel which aims to attain the minimum weight under burst pressure con- straint. The actual burst pressure is calculated using the arc-length and restart analysis in finite element analysis (FEA). A penalty function in the fitness function is proposed to deal with the constrained problem. The effects of the population size and the number of generations in the GA on the weight and burst pressure of the vessel are explored. The optimization results using the proposed GA are also compared with those using the simple GA and the conventional Monte Carlo method.
