Vibrational Temperature of Excited Nitrogen Molecules Detected in a 13.56 MHz Electrical Discharge by Sheath-Side Optical Emission Spectroscopy

Optical emission spectroscopy parallel to the axis of a low-pressure radio-frequency discharge in nitrogen was realized, i. e. end-on instead of customary side-on measurements. A specially designed optical feedthrough was fabricated and installed co-planar with the anode elec- trode, allowing non-invasive observations perpendicular to the plasma sheath. The principal ex- cited species flowing towards the grounded electrode were identified and, by assuming Boltzmann distributions, the vibrational temperature of the molecules on the X1 ∑＋/g and C3Ⅱu levels was estimated under various operating conditions.

Effect of Compound Energy-Field with Temperature and Ultrasonic Vibration on Mechanical Properties of TC2 Titanium Alloy

To solve the problem of the poor plasticity and to meet the requirements of high temperature for forming titanium alloy,mechanical properties of TC2 titanium alloy under the compound energy-field(CEF)with temperature and ultrasonic vibration were studied.The effects of CEF on tensile force,elongation,microstructure and fractography of the TC2 titanium alloy were compared and analyzed.The results show that,under the same thermal conditions,the deformation resistance of TC2 titanium alloy decreases with the increase of ultrasonic vibration energy.The formability is also improved correspondingly due to the input of ultrasonic vibration energy and its influence on the microstructure of the material.However,when the ultrasonic vibration energy is larger,the fatigue fracture will also appear,which reduces its formability.

Measurements of non-equilibrium and equilibrium temperature behind a strong shock wave in simulated martian atmosphere

Non-equilibrium radiation measurements behind strong shock wave for simulated Martian atmosphere are presented in this paper. The shock wave is established in a hydrogen oxygen combustion driven shock tube. Time- resolved spectra of the Av = 0 sequence of the B^2∑^＋ → X^2∑^＋ electronic transition of CN have been observed through optical emission spectroscopy （OES）. A new method, which is based on fitting high resolution spectrum for rotational and vibrational temperatures measurement, is proposed to diag- nose temperature distribution behind the shock wave. It is estimated that the current scheme has the maximum deviation less than 8% （lσ） for vibrational temperature measurement through detailed analysis of the influence of the uncertainties of spectroscopic constants and spectral resolution. Radiation structure of the shock layer, including induction, relaxation and equilibrium process, and corresponding rotational and vibrational temperatures are obtained through time gating OES diagnostics with sub-microsecond temporal resolution. The present extensive results will strongly benefit the reaction rate estimation and computational fluid dynamics （CFD） code validation in high enthalpy Mars reentry chemistry.

Generation of atmospheric pressure air diffuse discharge plasma in oxygen enriched working gas with floating electrode

In this work,a floating electrode is employed to generate a stable large-area diffuse discharge plasma under an open oxygen-rich environment.The discharge image and the optical emission spectra of the N2(C-B),N2+(B-X),N2(B-A),and O(3p–3s,777 nm)are measured to analyze the morphological and optical characteristics of the discharge.The effects of applied voltage,gas flow rate,and electrode gap on the reactive species,vibrational temperature and rotational temperature are investigated,and the discharge mode is discussed by simulating the electrostatic field before the breakdown.It is found that the changes of applied voltage and electrode gap causes the transition of the discharge modes among corona mode,diffuse discharge mode and spark mode.It is shown that the floating electrode can inhibit the transition from discharge to spark mode to a certain extent,which is conducive to maintaining the stability of discharge.As is vividly illustrated in this study,the increase of applied voltage or the decrease of electrode gap contributes to the generation of more active particles,such as N2(C)andN+2(B).Furthermore,the Joule heating effect becomes more evident with the increased applied voltage when the electrode gap is 15 and 20 mm.Moreover,as the applied voltage increases,the vibrational temperature increases at the electrode gap of 25 mm.

Effect of temperature on pull-in voltage and nonlinear vibration behavior of nanoplate-based NEMS under hydrostatic and electrostatic actuations

This paper deals with the study of the temperature effect on the nonlinear vibration behavior of nanoplate-based nano electromechanical systems（NEMS） subjected to hydrostatic and electrostatic actuations. Using Eringen＇s nonlocal elasticity and Gurtin–Murdoch theory, the nonlocal plate model is derived through Hamilton＇s principle. The governing equation which is extremely nonlinear due to the geometrical nonlinearity and electrostatic attraction forces is solved numerically using the differential quadrature method（DQM）. The accuracy of the present method is veriied by comparing the obtained results with the experimental data and those in the literature and very good agreement is obtained. Finally a comprehensive study is carried out to determine the inluence of temperature on the nonlinear vibration characteristics of NEMS made of two different materials including aluminum（Al）and silicon（Si） and some conclusions are drawn.

Experimental investigation of effects of airflows on plasma-assisted combustion actuator characteristics

The effects of the airflow on plasma-assisted combustion actuator （PACA） characteristics are studied in detail. The plasma is characterized electrically, as well as optically with a spectrometer. Our results show that the airflow has an obvious influence on the PACA characteristics. The breakdown voltage and vibrational temperature decrease, while the discharge power increases compared with the stationary airflow. The memory effect of metastable state species and the transportation characteristics of charged particles in microdischarge channel are the dominant causes for the variations of the breakdown voltage and discharge power, respectively, and the vibrational temperature calculated in this work can describe the electron energy of the dielectric barrier discharge plasma in PACA. These results offer new perspectives for the use of PACA in plasma-assisted combustion.

Characteristics of a Normal Glow Discharge Excited by DC Voltage in Atmospheric Pressure Air

Atmospheric pressure glow discharges were generated in an air gap between a needle cathode and a water anode. Through changing the ballast resistor and gas gap width between the electrodes, it has been found that the discharges are in normal glow regime judged from the currentvoltage characteristics and visualization of the discharges. Results indicate that the diameter of the positive column increases with increasing discharge current or increasing gap width. Optical emission spectroscopy is used to calculate the electron temperature and vibrational temperature. Both the electron temperature and the vibrational temperature increases with increasing discharge current or increasing gap width. Spatially resolved measurements show that the maxima of electron temperature and vibrational temperature appeared in the vicinity of the needle cathode.

Hybrid fiber Bragg grating sensor for vibration and temperature monitoring of a train bearing

We report a fiber Bragg grating（FBG）-based sensor for the simultaneous measurement of a train bearing’s vibration and temperature. A pre-stretched optical fiber with an FBG and a mass is designed for axial vibration sensing. Another multiplexed FBG is embedded in a selected copper-based alloy with a high thermal expansion to detect temperature. Experiments show that the sensor possesses a high resonant frequency of 970 Hz, an acceleration sensitivity of 27.28 pm/g, and a high temperature sensitivity of 35.165 pm/℃. A resonant excitation test is also carried out that demonstrates the robustness and reliability of the sensor.

Contrasting Behaviours of AC and DC Excited Plasmas in Contact with Liquid

A comparative study of the needle-to-liquid plasma in the continuous mode with DC and AC excitations is detailed in this paper. All plasmas studied here are shown to be glow discharges. This study is based on measurements of several key parameters, including electrical energy, optical emission intensities of active species, rotational and vibrational temperatures, and temperatures of the needle and liquid electrodes. AC plasmas can produce 1.2～5 times higher excited state active species than DC plasmas under the same dissipated power. AC excited liquid plasmas have the highest energy utilization efficiency among the three systems （AC excited plasmas, DC excited plasmas with water anode and DC excited plasmas with water cathode）; most of the energy is used to produce useful species rather than to heat the electrodes and plasmas.

Research on the characteristics of atmospheric air dielectric barrier discharge under different square wave pulse polarities

Energy efficiency limits the application of atmospheric pressure dielectric barrier discharge(DBD),such as air purification,water treatment and material surface modification.This article focuses on the electrical and optical effects of the DBD under three square wave pulses polarities-positive,negative and bipolar.The result shows that under the same voltage with the quartz glass medium,the discharge efficiency of bipolar polarity pulse is the highest due to the influence of deposited charge.With the increase of air gap distance from 0.5 to 1.5 mm,average power consumed by the discharge air gap and discharge efficiency decrease obviously under alumina,and increase,and then decrease under quartz glass and polymethyl methacrylate(PMMA).Through spectrum diagnosis,in the quartz glass medium,the vibration temperature is the highest under negative polarity pulse excitation.Under bipolar pulse,the vibration temperature does not change significantly with the change of air gap distance.For the three dielectric materials of quartz glass,alumina and PMMA,the molecular vibration temperature is the highest under the quartz glass medium with the same voltage.When the gap spacing,pulse polarity or dielectric material are changed,the rotational temperature does not change significantly.

Experimental study on cross-sensitivity of temperature and vibration of embedded fiber Bragg grating sensors

In view of the principle for occurrence of cross-sensitivity, a series of calibration experiments are carried out to solve the cross-sensitivity problem of embedded fiber Bragg gratings(FBGs) using the reference grating method. Moreover, an ultrasonic-vibration-assisted grinding(UVAG) model is established, and finite element analysis(FEA) is carried out under the monitoring environment of embedded temperature measurement system. In addition, the related temperature acquisition tests are set in accordance with requirements of the reference grating method. Finally, comparative analyses of the simulation and experimental results are performed, and it may be concluded that the reference grating method may be utilized to effectively solve the cross-sensitivity of embedded FBGs.

Characteristics of Low Power CH_4/Air Atmospheric Pressure Plasma Jet

A low power atmospheric pressure plasma jet driven by a 24 kHz AC power source and operated with a CH4/air gas mixture has been investigated by optical emission spectrometer. The plasma parameters including the electron excitation temperature, vibrational temperature and rotational temperature of the plasma jet at different discharge powers are diagnosed based on the assumption that the kinetic energy of the species obeys the Boltzmann distribution. The electron density at different power is also investigated by HS Stark broadening. The results show that the plasma source works under non-equilibrium conditions. It is also found that the vibrational temperature and rotational temperat;ure increase with discharge power, whereas the electron excitation temperature seems to have a downward trend. The electron density increases from 0.8×10^21 m^-3 to 1.1×10^21 m^-3 when the discharge power increases from 53 W to 94 W.

Plasma parameter diagnosis using hydrogen emission spectra of a quartz-chamber 2.45 GHz ECRIS at Peking University

A quartz-chamber 2.45 GHz electron cyclotron resonance ion source(ECRIS) was designed for diagnostic purposes at Peking University [Patent Number: ZL 201110026605.4]. This ion source can produce a maximum 84 m A hydrogen ion beam at 50 k V with a duty factor of 10%. The root-mean-square(RMS) emittance of this beam is less than 0.12π mm mrad. In our initial work,the electron temperature and electron density inside the plasma chamber had been measured with the line intensity ratio of noble gases. Based on these results, the atomic and molecular emission spectra of hydrogen were applied to determine the dissociation degree of hydrogen and the vibrational temperature of hydrogen molecules in the ground state, respectively. Measurements were performed at gas pressures from 4×10^(-4) to 1×10^(-3) Pa and at input peak RF power ranging from 1000 to 1800 W. The dissociation degree of hydrogen in the range of 0.5%-10% and the vibrational temperature of hydrogen molecules in the ground state in the range of 3500-8500 K were obtained. The plasma processes inside this ECRIS chamber were discussed based on these results.