Visible-light responsive TiO2-V2O5 catalyst was prepared using a binary sol-gel and in-situ intercalation method. The TiO2 sol and V2O5 sol were mixed to disperse the V2O5 species in the TiO2 phase at molecular level....Visible-light responsive TiO2-V2O5 catalyst was prepared using a binary sol-gel and in-situ intercalation method. The TiO2 sol and V2O5 sol were mixed to disperse the V2O5 species in the TiO2 phase at molecular level. The binary sol was then intercalated into interspaces of polyaniline （PANI） by means of in-situ polymerization of aniline. Conglomeration of the TiO2-V2O5 dusters during the calcination process was avoided because of the wrap of polyaniline. The surface mor- phology, the crystal phases, the structure, and the absorption spectra of （PANI）,/TiO2-V2O5 and the composite catalyst were studied using SEM, XRD, FT-IR, and UV-Vis. The photoactivity of the prepared catalyst under UV and visible light irradiation were evaluated by decolorization of methylene blue （MB） solution. The results showed that the composite catalyst displayed a homogeneous anatase phase, and the vanadium pentoxide species was highly dispersed in the TiO2 phase. The composite catalyst responded to visible light because of the narrowed band gap. In this study, the catalyst with the sol volume ratio of TiO2： V2O5 = 10：1 presented the best photocatalytic activity.展开更多
The rare earth ion Yb^3+ doped Bi2WO6 photocatalysts were synthesized by hydrothermal method.Moreover,XRD,XPS,FESEM,TEM,Ramam,N2 adsorption-desorption isotherm measurements and UV-vis diffusion reflectance spectra wer...The rare earth ion Yb^3+ doped Bi2WO6 photocatalysts were synthesized by hydrothermal method.Moreover,XRD,XPS,FESEM,TEM,Ramam,N2 adsorption-desorption isotherm measurements and UV-vis diffusion reflectance spectra were used to characterize the Yb^3+ doped Bi2WO6 photocatalysts.The morphology,specific surface area,and pore volume distribution were greatly affected after Yb3+ ions doping.Photocatalytic performance of Bi2WO6 was effectively enhanced after Yb3+ ions doping,6% Yb^3+ doped Bi2WO6 had the best photocatalytic performance,and 96.2% Rhodamine B was degradated after irradiated 30 min,which was 1.29 times that of the pristine one.The enhanced photocatalytic performance was due to the increased specific surface area,decreased energy band gap and inhibition of photoelectron-hole recombination after Yb3+ ions doping.展开更多
Photocatalysis is one of the most promising methods owing to its great potential to relieve environmental issue. To construct efficient photocatalyst with low energy consumption, mild catalytic conditions, and stable ...Photocatalysis is one of the most promising methods owing to its great potential to relieve environmental issue. To construct efficient photocatalyst with low energy consumption, mild catalytic conditions, and stable chemical properties are highly desired. In this work, a novel, highly active and environmental friendly mesoporous photocatalyst Bi4O5Br2/SBA-15 was synthesized by hydrothermal method, and its characteristics and visible-light catalytic activity were investigated. The synthesized photocatalyst consisted of Langmuir type IV hysteresis loops, which was confirmed to be a composite material with mesoporous structure. It exhibited a high visible-light absorption intensity and a low recombination rate of photo-generated electrons and holes. When the mass ratio of Bi/SiO2 was 30/100 during the synthesis, the obtained photocatalyst (Bi30/SBA-15) reflected the fastest Rhodamine B (RhB) removal rate and achieved 100% decolorization of RhB by both adsorption and degradation process. This high decolorization efficiency can also be maintained and realized by recycling the used composite in practice. The enhanced visible-light photocatalytic activity of novel Bi4O5Br2/SBA-15 photocatalyst can be ascribed to the existing active sites both inside and outside SBA-15 which enhanced the separation of photo-generated electrons and holes.展开更多
In order to enhance Ni-EDTA decomplexation and Ni recovery via photoelectrocatalytic (PEC)process,TiO_(2)/Ni-Sb-SnO_(2)bifunctional electrode was fabricated as the photoanode and activated carbon fiber (ACF) was intro...In order to enhance Ni-EDTA decomplexation and Ni recovery via photoelectrocatalytic (PEC)process,TiO_(2)/Ni-Sb-SnO_(2)bifunctional electrode was fabricated as the photoanode and activated carbon fiber (ACF) was introduced as the cathode.At a cell voltage of 3.5 V and initial solution pH of 6.3,the TiO_(2)/Ni-Sb-SnO_(2)bifunctional photoanode exhibited a synergetic effect on the decomplexation of Ni-EDTA with the pseudo-first-order rate constant of 0.01068 min^(-1)with 180 min by using stainless steel (SS) cathode,which was 1.5 and 2.4times higher than that of TiO_(2)photoanode and Ni-Sb-SnO_(2)anode,respectively.Moreover,both the efficiencies of Ni-EDTA decomplexation and Ni recovery were improved to 98%from 86%and 73%from 41%after replacing SS cathode with ACF cathode,respectively.Influencing factors on Ni-EDTA decomplexation and Ni recovery were investigated and the efficiencies were favored at acidic condition,higher cell voltage and lower initial Ni-EDTA concentration.Ni-EDTA was mainly decomposed via·OH radicals which generated via the interaction of O_(3),H_(2)O_(2),and UV irradiation in the contrasted PEC system.Then,the liberated Ni^(2+)ions which liberated from Ni-EDTA decomplexation were eventually reduced to metallic Ni on the ACF cathode surface.Finally,the stability of the constructed PEC system on Ni-EDTA decomplexation and Ni recovery was exhibited.展开更多
Birnessite films on fluorine-doped tin oxide（FTO） coated glass were prepared by cathodic reduction of aqueous KMnO4. The deposited birnessite films were characterized with X-ray diffraction, Raman spectroscopy, scan...Birnessite films on fluorine-doped tin oxide（FTO） coated glass were prepared by cathodic reduction of aqueous KMnO4. The deposited birnessite films were characterized with X-ray diffraction, Raman spectroscopy, scanning electron microscopy and atomic force microscopy.The photoelectrochemical activity of birnessite films was investigated and a remarkable photocurrent in response to visible light was observed in the presence of phenol, resulting from localized manganese d–d transitions. Based on this result, the photoelectrocatalytic oxidation of phenol was investigated. Compared with phenol degradation by the electrochemical oxidation process or photocatalysis separately, a synergetic photoelectrocatalytic degradation effect was observed in the presence of the birnessite film coated FTO electrode.Photoelectrocatalytic degradation ratios were influenced by film thickness and initial phenol concentrations. Phenol degradation with the thinnest birnessite film and initial phenol concentration of 10 mg/L showed the highest efficiency of 91.4% after 8 hr. Meanwhile, the kinetics of phenol removal was fit well by the pseudofirst-order kinetic model.展开更多
Developing low-cost and high-efficiency photocatalysts for hydrogen production from solar water splitting is intriguing but challenging. In this study, unique one-dimensional （1D） multi-node MoS2/CdS hetero-nanowir...Developing low-cost and high-efficiency photocatalysts for hydrogen production from solar water splitting is intriguing but challenging. In this study, unique one-dimensional （1D） multi-node MoS2/CdS hetero-nanowires （NWs） for efficient visible-light photocatalytic H2 evolution are synthesized via a facile hydrothermal method. Flower-like sheaths are assembled from numerous_ defect-rich O-incorporated {0001} MoS2 facet surrounded CdS NW stems are ultrathin nanosheets （NSs）, and {1120}- grown preferentially along the c-axis. Interestingly, the defects in the MoS2 NSs provide additional active S atoms on the exposed edge sites, and the incorporation of O reduces the energy barrier for H2 evolution and increases the electric conductivity of the MoS2 NSs. Moreover, the recombination of photoinduced charge carriers is significantly inhibited by the heterojunction formed between the MoS2 NSs and CdS NWs. Therefore, in the absence of noble metals as co-catalysts, the 1D MoS2 NS/CdS NW hybrids exhibit an excellent H2-generation rate of 10.85 mmol·g^-1·h^-1 and a quantum yield of 22.0% at ,λ = 475 nm, which is far better than those of Pt/CdS NWs, pure MoS2 NSs, and CdS NWs as well as their physical mixtures. Our results contribute to the rational construction of highly reactive nanostructures for various catalytic applications.展开更多
A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric ...A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.展开更多
文摘Visible-light responsive TiO2-V2O5 catalyst was prepared using a binary sol-gel and in-situ intercalation method. The TiO2 sol and V2O5 sol were mixed to disperse the V2O5 species in the TiO2 phase at molecular level. The binary sol was then intercalated into interspaces of polyaniline （PANI） by means of in-situ polymerization of aniline. Conglomeration of the TiO2-V2O5 dusters during the calcination process was avoided because of the wrap of polyaniline. The surface mor- phology, the crystal phases, the structure, and the absorption spectra of （PANI）,/TiO2-V2O5 and the composite catalyst were studied using SEM, XRD, FT-IR, and UV-Vis. The photoactivity of the prepared catalyst under UV and visible light irradiation were evaluated by decolorization of methylene blue （MB） solution. The results showed that the composite catalyst displayed a homogeneous anatase phase, and the vanadium pentoxide species was highly dispersed in the TiO2 phase. The composite catalyst responded to visible light because of the narrowed band gap. In this study, the catalyst with the sol volume ratio of TiO2： V2O5 = 10：1 presented the best photocatalytic activity.
基金the National Natural Science Foundation of China(No.51662005)。
文摘The rare earth ion Yb^3+ doped Bi2WO6 photocatalysts were synthesized by hydrothermal method.Moreover,XRD,XPS,FESEM,TEM,Ramam,N2 adsorption-desorption isotherm measurements and UV-vis diffusion reflectance spectra were used to characterize the Yb^3+ doped Bi2WO6 photocatalysts.The morphology,specific surface area,and pore volume distribution were greatly affected after Yb3+ ions doping.Photocatalytic performance of Bi2WO6 was effectively enhanced after Yb3+ ions doping,6% Yb^3+ doped Bi2WO6 had the best photocatalytic performance,and 96.2% Rhodamine B was degradated after irradiated 30 min,which was 1.29 times that of the pristine one.The enhanced photocatalytic performance was due to the increased specific surface area,decreased energy band gap and inhibition of photoelectron-hole recombination after Yb3+ ions doping.
文摘Photocatalysis is one of the most promising methods owing to its great potential to relieve environmental issue. To construct efficient photocatalyst with low energy consumption, mild catalytic conditions, and stable chemical properties are highly desired. In this work, a novel, highly active and environmental friendly mesoporous photocatalyst Bi4O5Br2/SBA-15 was synthesized by hydrothermal method, and its characteristics and visible-light catalytic activity were investigated. The synthesized photocatalyst consisted of Langmuir type IV hysteresis loops, which was confirmed to be a composite material with mesoporous structure. It exhibited a high visible-light absorption intensity and a low recombination rate of photo-generated electrons and holes. When the mass ratio of Bi/SiO2 was 30/100 during the synthesis, the obtained photocatalyst (Bi30/SBA-15) reflected the fastest Rhodamine B (RhB) removal rate and achieved 100% decolorization of RhB by both adsorption and degradation process. This high decolorization efficiency can also be maintained and realized by recycling the used composite in practice. The enhanced visible-light photocatalytic activity of novel Bi4O5Br2/SBA-15 photocatalyst can be ascribed to the existing active sites both inside and outside SBA-15 which enhanced the separation of photo-generated electrons and holes.
基金supported by the China Postdoctoral Science Foundation (No.2020M680710)the National Natural Science Foundation of China (No.22106173)。
文摘In order to enhance Ni-EDTA decomplexation and Ni recovery via photoelectrocatalytic (PEC)process,TiO_(2)/Ni-Sb-SnO_(2)bifunctional electrode was fabricated as the photoanode and activated carbon fiber (ACF) was introduced as the cathode.At a cell voltage of 3.5 V and initial solution pH of 6.3,the TiO_(2)/Ni-Sb-SnO_(2)bifunctional photoanode exhibited a synergetic effect on the decomplexation of Ni-EDTA with the pseudo-first-order rate constant of 0.01068 min^(-1)with 180 min by using stainless steel (SS) cathode,which was 1.5 and 2.4times higher than that of TiO_(2)photoanode and Ni-Sb-SnO_(2)anode,respectively.Moreover,both the efficiencies of Ni-EDTA decomplexation and Ni recovery were improved to 98%from 86%and 73%from 41%after replacing SS cathode with ACF cathode,respectively.Influencing factors on Ni-EDTA decomplexation and Ni recovery were investigated and the efficiencies were favored at acidic condition,higher cell voltage and lower initial Ni-EDTA concentration.Ni-EDTA was mainly decomposed via·OH radicals which generated via the interaction of O_(3),H_(2)O_(2),and UV irradiation in the contrasted PEC system.Then,the liberated Ni^(2+)ions which liberated from Ni-EDTA decomplexation were eventually reduced to metallic Ni on the ACF cathode surface.Finally,the stability of the constructed PEC system on Ni-EDTA decomplexation and Ni recovery was exhibited.
基金supported by the National Basic Research Program(973)of China(No.2014CB846001)the NationalNatural Science Foundation of China(Nos.41230103,41402032&41402301)
文摘Birnessite films on fluorine-doped tin oxide（FTO） coated glass were prepared by cathodic reduction of aqueous KMnO4. The deposited birnessite films were characterized with X-ray diffraction, Raman spectroscopy, scanning electron microscopy and atomic force microscopy.The photoelectrochemical activity of birnessite films was investigated and a remarkable photocurrent in response to visible light was observed in the presence of phenol, resulting from localized manganese d–d transitions. Based on this result, the photoelectrocatalytic oxidation of phenol was investigated. Compared with phenol degradation by the electrochemical oxidation process or photocatalysis separately, a synergetic photoelectrocatalytic degradation effect was observed in the presence of the birnessite film coated FTO electrode.Photoelectrocatalytic degradation ratios were influenced by film thickness and initial phenol concentrations. Phenol degradation with the thinnest birnessite film and initial phenol concentration of 10 mg/L showed the highest efficiency of 91.4% after 8 hr. Meanwhile, the kinetics of phenol removal was fit well by the pseudofirst-order kinetic model.
基金Acknowledgements This work was supported by the National Natural Science Foundation of China （Nos. 21431003 and 21521091） and China Ministry of Science and Technology （No. 2016YFA0202801）. We also thank Dr. Lina Zhang and Ms. Xiaohua Gu for their kind help with the TEM measurements.
文摘Developing low-cost and high-efficiency photocatalysts for hydrogen production from solar water splitting is intriguing but challenging. In this study, unique one-dimensional （1D） multi-node MoS2/CdS hetero-nanowires （NWs） for efficient visible-light photocatalytic H2 evolution are synthesized via a facile hydrothermal method. Flower-like sheaths are assembled from numerous_ defect-rich O-incorporated {0001} MoS2 facet surrounded CdS NW stems are ultrathin nanosheets （NSs）, and {1120}- grown preferentially along the c-axis. Interestingly, the defects in the MoS2 NSs provide additional active S atoms on the exposed edge sites, and the incorporation of O reduces the energy barrier for H2 evolution and increases the electric conductivity of the MoS2 NSs. Moreover, the recombination of photoinduced charge carriers is significantly inhibited by the heterojunction formed between the MoS2 NSs and CdS NWs. Therefore, in the absence of noble metals as co-catalysts, the 1D MoS2 NS/CdS NW hybrids exhibit an excellent H2-generation rate of 10.85 mmol·g^-1·h^-1 and a quantum yield of 22.0% at ,λ = 475 nm, which is far better than those of Pt/CdS NWs, pure MoS2 NSs, and CdS NWs as well as their physical mixtures. Our results contribute to the rational construction of highly reactive nanostructures for various catalytic applications.
文摘A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.
