TRANSVERSELY ISOTROPIC HYPER-ELASTIC MATERIAL RECTANGULAR PLATE WITH VOIDS UNDER A UNIAXIAL EXTENSION

The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extension are studied. The deformation functions of plates with voids that are symmetrically distributed in a certain manner are given and the functions are expressed by two parameters by solving the differential equations.The solution may be approximately obtained from the minimum potential energy principle. Thus, the analytic solutions of the deformation and stress of the plate are obtained. The growth of the voids and the distribution of stresses along the voids are analyzed and the influences of the degree of anisotropy, the size of the voids and the distance between the voids are discussed. The characteristics of the growth of the voids and the distribution of stresses of the plates with one void, three or five voids are obtained and compared.

The reuse of abandoned Acquaresi mine voids for storage of the Masua flotation tailings

Often in abandoned mine sites are present both underground voids produced by mining and the tailings of treatment plant.An interesting solution for the rehabilitation of the sites would be to place the tailings of the process in the underground mining voids,thus obtaining the reclamation of surface areas and the stabilization of abandoned voids to prevent the dangerous phenomena of subsidence.However,these operations require inert waste,which must not be source of pollution,and the choice of a water/solid optimum to ensure good conditions of pumpability.

ENERGY PRINCIPLES IN THEORY OF ELASTIC MATERIALS WITH VOIDS

According to the basic idea of dual-complementarity, in a simple and unified way proposed by the author, various energy principles in theory of elastic materials with voids can be established systematically, In this paper, an important integral relation is given, which can be considered essentially as the generalized pr- inciple of virtual work. Based on this relation, it is possible not only to obtain the principle of virtual work and the reciprocal theorem of work in theory of elastic materials with voids, but also to derive systematically the complementary functionals for the eight-field, six-field, four-field and two-field generalized variational principles, and the principle of minimum potential and complementary energies. Furthermore, with this appro ach, the intrinsic relationship among various principles can be explained clearly.

Effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids by using the Lord-Shulman and dual-phase-lag models

The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.

Multiresolution Isogeometric Topology Optimisation Using Moving Morphable Voids

A general and new explicit isogeometric topology optimisation approach with moving morphable voids(MMV)is proposed.In this approach,a novel multiresolution scheme with two distinct discretisation levels is developed to obtain high-resolution designs with a relatively low computational cost.Ersatz material model based on Greville abscissae collocation scheme is utilised to represent both the Young’s modulus of the material and the density field.Two benchmark examples are tested to illustrate the effectiveness of the proposed method.Numerical results show that high-resolution designs can be obtained with relatively low computational cost,and the optimisation can be significantly improved without introducing additional DOFs.

Analysis of Air Voids Evolution in Cement Pastes Admixed with Non-ionic Cellulose Ethers

Four cellulose ethers（CEs） were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement pastes containing the four cellulose ethers are significantly higher than that of the pure cement pastes and the total pore volume and porosity of cement pastes containing HEC（hydroxyethyl cellulose ether） or low viscosity cellulose ethers are low in four CEs. By changing the surface tension and viscosity of liquid phase and the strengthening of liquid film between air voids in cement pastes, CEs affect the formation, diameter evolution and upward movement of air voids and the pore structure of hardening cement paste. For the four CEs, the pore volume of cement pastes containing HEC or low viscosity cellulose ethers is higher with the diameter of 30-70 nm while lower with the diameter larger than 70 nm. CEs affect the pore structure of cement paste mainly through their effects on the evolvement of the small air voids into bigger ones when the pore diameter is below 70 nm and their effects on the entrainment and stabilization of air voids when the pore diameter is above 70 nm.

ON SOME BASIC PRINCIPLES IN DYNAMIC THEORY OF ELASTIC MATERIALS WITH VOIDS

According to the basic idea of dual-complementarity,in a simple and unified way proposed by the author,some basic principles in dynamic theory of elastic materials with voids can be established sys- tematically.In this paper, an important integral relation in terms of convolutions is given,which can be con- sidered as the generalized principle of virtual work in mechanics.Based on this relation,it is possible not on- ly to obtain the principle of virtual work and the reciprocal theorem in dynamic theory of elastic materials with voids,but also to derive systematically the complementary functionals for the eight-field,six-field, four-field and two-field simplified Gurtin-type variational principles.Furthermore,with this approach,the in- trinsic relationship among various principles can be explained clearly.

Experimental investigation of the dynamic behavior of railway track with sleeper voids

The deterioration of the sleeper support on the ballasted track begins with the accumulation of sleeper voids.The increased dynamic loading in the voided zone and the ballast contact conditions cause the accelerated growth of the settlements in the voided zones,which results in the appearance of local instabilities like ballast breakdown,white spots,subgrade defects,etc.The recent detection and quantification of the sleeper voids with track-side and onboard monitoring can help to avoid or delay the development of local instabilities.The present paper is devoted to the study of the dynamic behavior of railway track with sleeper voids in the ballast breakdown zone.The result of the experimental track-side measurements of rail acceleration and deflection is presented.The analysis shows the existence of the dynamic impact during wheel entry in the voided zone.However,the measured dynamic impact is subjected to the bias of the track-side measurement method.Both the mechanism of the impact and the measurement aspects are explained by using the one-beam model on viscoelastic foundation.The void features in the dynamic behavior are analyzed for the purpose of track-side and onboard monitoring.A practical method of the void parameter quantification is proposed.

Control Factors of Solutional Voids in Feldspars and Favorable Zone Forecast of Chang 2 Oil Reservoir Group in the Midwest Ordos Basin

The development of pores in a clastic reservoir is one of the most important research subjects in oil-gas exploration and development, whereas the many reasons for the formation of secondary porosity have increased the degree of difficulty in such research. Thus the research aims are to discover the controlling factors of solutional voids in feldspars and to predict favorable regions for these voids. Macroscopic and systematic researches into the relationship between the kaolinite content in the feldspar solutional void developed area of the Chang 2 reservoir group of the Triassic Yanchang Formation in the Midwest Ordos Basin and the solutional void in feldspar have been made, and from this it can be determined that the kaolinite content has an indicative function to the distribution of the solutional void in feldspar. Solutional void in feldspar is relatively well developed at the area where kaolinite content is high. Although the factors affecting kaolinite content are complicated, yet that of the research area is mainly affected by the impact of the leaching atmospheric water acting on the palaeogeomorphology. Three favorable zone belts for the development of solutional voids in feldspars are forecasted on the basis of restoration of palaeogeomorphology.

Introducing voids around the interlayer of AlN by high temperature annealing

Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging.In this work,the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition.Then,the AlN template was annealed at 1700℃for an hour to introduce the voids.It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer.Meanwhile,the dislocation density of the AlN template decreased from 5.26×10^(9)cm^(-2)to 5.10×10^(8)cm^(-2).This work provides a possible method to introduce voids into AlN layer at a designated height,which will benefit the design of AlN-based devices.

Research on segregation evaluation methods of asphalt pavement based on air voids distribution

Eye observation was used to evaluate the segregation degree of asphalt pavement, which was not much creditable. To the asphalt pavement, road surface texture measuring method which has appeared recently can identify gradational segregation; but it can’t reflect the influence of the temperature segregation. However, using infrared temperature detector to evaluate the segregation must be taken during paving, which brings much inconvenience. In this paper, measuring the air voids distribution using non-nuclear density gauge to evaluate asphalt pavement segregation was introduced. Result shows that this method can directly reflect the comprehensive results of the two types of segregation in a high efficient and accurate way. Moreover, using the sketch map of segregation area can help to analyze the segregation reason visually.

How to Obtain a Mass of a Graviton, and Does This Methodology Lead to Voids?

Using the Klauder enhanced quantization as a way to specify the cosmological constant as a baseline for the mass of a graviton, we eventually come up and then we will go to the relationship of a Planck Length to a De Broglie length in order to link how we construct a massive graviton mass, with cosmological constant and to interface that with entropy in the early universe. We then close with a reference to the possible quantum origins of e folding and inflation. This objective once achieved is connected with a possible mechanism for the creation of voids, in the later universe, using a construction of shock fronts from J. P. Onstriker, 1991 and followed up afterwards with Mukhanov’s physical foundations to Cosmology book section as to indicate how variable input into self reproduction of the Universe structures may lead to void formation in the present era. A connection with Wesson’s 5 dimensional cosmology is brought up in terms of a generalized uncertainty principle which may lead to variations of varying energy input into self reproducing cosmological structures which could enable non uniform structure formation and hence voids. One of the stunning results is that the figure of number of gravitons, about 1058, early on, is commensurate with a need for negative pressure, (middle of manuscript) which is a stunning result, partly based on Volovik and weakly interacting Bose gas model for pressure, which is completely unexpected. Note that in quantum physics, the idea statistically is that at large quantum numbers, we have an approach to classical physics results. We will do the same as to our cosmological work. This means that the , in our last set of equations, which as we indicate has the surprise condition that for Pre-Planckian space-time that a very large value for initial Pre Planckian dimensions dmin which is the dimensional input into the Pre Planckian state, prior to emergence into Planckian cosmology conditions. We conclude by stating the following question. Can extra dimensions come from a Multiverse feed into Pre-Planckian space-time? See Theorem at the end of this publication. Our answer is in the affirmative, and it has intellectual similarities to George Chapline’s work with Black hole physics.

Propagation of wave at the boundary surface of transversely isotropic thermoelastic material with voids and isotropic elastic half-space

The purpose of this research is to study the effect of voids on the surface wave propagation in a layer of a transversely isotropic thermoelastic material with voids lying over an isotropic elastic half-space. The frequency equation is derived after developing a mathematical model for welded and smooth contact boundary conditions. The dispersion curves giving the phase velocity and attenuation coefficient via wave number are plotted graphically to depict the effects of voids and anisotropy for welded contact boundary conditions. The specific loss and amplitudes of the volume fraction field, the normal stress, and the temperature change for welded contact are obtained and shown graphically for a particular model to depict the voids and anisotropy effects. Some special cases are also deduced from the present investigation.

Growth of Voids in a Hyperelastic Rectangular Plate

The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.

Spectroscopic Properties of a Novel Zinc Phthalocyanine with four 17-Membered Crown Ether Voids

A zinc phthalocyanine containing (17-crown-5) ether subunits has been synthesized UV-visible absorption and fluorescence emission spectra and associated photophysical parameters have been determined. In addition to the fluorescence at 710 nm from S-1, a strong upper excited state emission around 424 nn has been detected. X-ray structural analysis showed that the crown ether unit is conformationally deformed and oblate like that accounted for the unusual spectroscopic properties.

Surface Wave Propagation in a Generalized Thermoelastic Material with Voids

In the present paper, the propagation of surface wave in a generalized thermoelastic solid with voids is considered. The governing equations are solved to obtain the general solution in x-z plane. The appropriate boundary conditions at an interface between two dissimilar half-spaces are satisfied by appropriate particular solutions to obtain the frequency equation of the surface wave in the medium. Some special cases are also discussed.

Voids' System in the Woven Composite Structure

Ccanposites are common material constructions for high-tech use now. Mechanical properties of woven reinforced composites are influenced by voids inside the structure. Voids could be classified to the two sections. Long and thin cracks are more dangerous than pores. It is important to find relations between preparation and place of occurrence of voids. This paper classifies defects according to rise mechanism, point of occurrence, orientation, size and affect to the properties. Image analysis was used for observing samples. Future work would be oriented not only to observing real samples, bet also to calculate mechanical properties frwn real and ideal structures in 3D woven reinforced composites.

CFRP Voids 3D Identification and Location Method Based on the Process of Backscattered Signal

The porosity of carbon fiber reinforced polymer（CFRP） workpiece is tested by ultrasonic in pulse-echo mode.When the ultrasonic frequency is close to the resonant frequency of the workpiece,the resonance will occur along the thickness direction.If the CFRP workpiece contains voids,the resonant frequency will decrease.The result of ultrasonic testing experiment clearly draws the conclusion that the center frequency of the backscattered signal spectrum declines with increasing porosity.Based on the above theory and conclusion,the three-dimensional（3D） voids identification and location method is established.Firstly,the ultrasonic signals are collected and the center frequencies of the backscattered signal spectra are calculated.Then the C-scan of center frequency is generated to identify the voids.At last the B-scan of center frequency for the region containing voids is generated to determine the depth of the voids.The experimental results show that,by using this method,the voids in the CFRP workpiece can be identified and pinpointed.

Elimination of Voids at Interface of β-SiC Films and Si Substrate by Laser CVD

Void-free β-SiC films were deposited on Si（001） substrates by laser chemical vapor deposition using hexamethyldisilane（HMDS） as the precursor. The effect of the time of introducing HMDS, i e, the substrate temperature when HMDS introduced（T_（in））, on the preferred orientation, surface microstructure and void was investigated. The orientation of the deposited SiC films changed from 〈001〉 to random to 〈111〉 with increasing T_（in）. The surface showed a layer-by-layer microstructure with voids above T_（in） ≥ 773 K, and then transformed into mosaic structure without voids at T_（in）= 298 K. The mechanism of the elimination of voids was discussed. At T_（in） =298 K, Si surface can be covered by an ultrathin SiC film, which inhibits the out-diffusion of Si atoms from substrate and prohibites the formation of the voids.

Morphological evolution and growth kinetics of Kirkendall voids in binary alloy system during deformation process-Phase field crystal simulation study

The formation and growth of Kirkendall voids in a binary alloy system during deformation process were investigated byphase field crystal model.The simulation results show that Kirkendall voids nucleate preferentially at the interface,and the averagesize of the voids increases with both the time and strain rate.There is an obvious coalescence of the voids at a large strain rate whenthe deformation is applied along the interface under both constant and cyclic strain rate conditions.For the cyclic strain rate appliedalong the interface,the growth exponent of Kirkendall voids increases with increasing the strain rate when the strain rate is largerthan1.0×10-6,while it increases initially and then decreases when the strain rate is smaller than9.0×10?7.The growth exponent ofKirkendall voids increases initially and then decreases gradually with increasing the length of cyclic period under a square-waveform constant strain rate.