Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wend...Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wendelstein 7-X in the first operational campaign,with the modification of the magnetic configuration by use of the trim coils and tuning the field coil currents,commonly named iota scan.Ideally,the heat loads on the five limiters are equal.However,they differ between each limiter and are non-uniform,due to the（relatively small） error fields caused by the misalignment of components.It is therefore necessary to study the influence of the configuration changes on the transport of heat and particles in the plasma edge caused by the application of error fields and the change of the magnetic configuration.In this paper the upstream measurements conducted with the combined probe are compared to the downstream measurements with the DIAS infrared camera on the limiter.展开更多
In the project Wendelstein 7-X (W7-X), the popular fieldbus Profibus has been determined as a uniform connection between the central control system and all the subordinate systems. A universal embedded control system ...In the project Wendelstein 7-X (W7-X), the popular fieldbus Profibus has been determined as a uniform connection between the central control system and all the subordinate systems. A universal embedded control system has been developed for W7-X power supply controlling. Siemens 80C167CR microcontroller is used as the central control unit of the system. With a user-defined printed circuit board (PCB) several control buses, i.e., Profibus, CAN, IEEE 488, RS485 and RS 232 have been connected to the microcontroller. The corresponding hardware interfaces for the control buses have been designed. A graphic liquid crystal display(LCD) and a user-defined keyboard are used as user interface. The control software will be developed with a C-like language, i.e., C166 for the controller.展开更多
基金funding from the Euratom research and training program 2014–2018 under grant agreement No.633053
文摘Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wendelstein 7-X in the first operational campaign,with the modification of the magnetic configuration by use of the trim coils and tuning the field coil currents,commonly named iota scan.Ideally,the heat loads on the five limiters are equal.However,they differ between each limiter and are non-uniform,due to the（relatively small） error fields caused by the misalignment of components.It is therefore necessary to study the influence of the configuration changes on the transport of heat and particles in the plasma edge caused by the application of error fields and the change of the magnetic configuration.In this paper the upstream measurements conducted with the combined probe are compared to the downstream measurements with the DIAS infrared camera on the limiter.
文摘In the project Wendelstein 7-X (W7-X), the popular fieldbus Profibus has been determined as a uniform connection between the central control system and all the subordinate systems. A universal embedded control system has been developed for W7-X power supply controlling. Siemens 80C167CR microcontroller is used as the central control unit of the system. With a user-defined printed circuit board (PCB) several control buses, i.e., Profibus, CAN, IEEE 488, RS485 and RS 232 have been connected to the microcontroller. The corresponding hardware interfaces for the control buses have been designed. A graphic liquid crystal display(LCD) and a user-defined keyboard are used as user interface. The control software will be developed with a C-like language, i.e., C166 for the controller.
