Fe/Al2O3 ceramic coating was made by spraying and sol-gel. The corrosion resistance between Fe/Al2O3 ceramic coating and steel 45# was studied. By microscope and X-ray diffraction, the binding and the composition of ...Fe/Al2O3 ceramic coating was made by spraying and sol-gel. The corrosion resistance between Fe/Al2O3 ceramic coating and steel 45# was studied. By microscope and X-ray diffraction, the binding and the composition of the interface were also analyzed. The results showed that Fe/Al2O3 ceramic coating had dense struc- ture, less porosity and better binding with the substrate which was effective to prevent erosive liquor immersing into the inside of ceramic coating. Some substances that distributed homogeneously in Fe/Al2O3 ceramic coating, such as α-Al2O3, FeAlO3 and Fe3Al, could improve the corrosion resistance of this material.展开更多
WC7Co/Ti6Al4V composite coatings are deposited on the pure Ti substrate by pulse laser cladding(LC).During the laser melting process,the decomposition of WC7Co particles will lead to the evolution of microstructure an...WC7Co/Ti6Al4V composite coatings are deposited on the pure Ti substrate by pulse laser cladding(LC).During the laser melting process,the decomposition of WC7Co particles will lead to the evolution of microstructure and phases,which is directly related to the wear resistance and mechanism of composite coating.The microstructural evolution,phase compositions and interface reaction of WC7Co/Ti6Al4V composite coating were examined by scanning electron microscopy,energydispersive spectrum and X-ray diffraction(XRD).The hardness of different structures and abrasive resistance of composite coating were measured.The results show that the typical microstructure of LC WC7Co/Ti6Al4V composite coating can be classified into dissolved WC7Co composite structure and un-dissolved WC7Co structure.According to XRD results,there are Ti solid solution,W,TiC,VC,Co3W3C and secondary W2C in composite coating.The eutectic structure formed by the dissolved WC7Co particles consisted of W,W2C,TiC and P-Ti solid solution.The mean hardness of different structures exhibits a significant gradient distribution in composite coating.A reaction layer composed of TiC,W and W2C is also generated onto the interface between un-dissolved WC7Co particles and Ti6Al4V alloy matrix.The abrasive mechanisms of WC7Co/Ti6Al4V composite coating are mainly adhesive wear and oxidation wear during the dry sliding process.展开更多
文摘Fe/Al2O3 ceramic coating was made by spraying and sol-gel. The corrosion resistance between Fe/Al2O3 ceramic coating and steel 45# was studied. By microscope and X-ray diffraction, the binding and the composition of the interface were also analyzed. The results showed that Fe/Al2O3 ceramic coating had dense struc- ture, less porosity and better binding with the substrate which was effective to prevent erosive liquor immersing into the inside of ceramic coating. Some substances that distributed homogeneously in Fe/Al2O3 ceramic coating, such as α-Al2O3, FeAlO3 and Fe3Al, could improve the corrosion resistance of this material.
基金National Natural Science Foundation of China(51701165)the Natural Science Foundation of Shaanxi Province(2018JM5005)+1 种基金Postdoctoral Science Foundation of China(2017M623334XB)Shaanxi Province Postdoctoral Science Foundation(2018BSHQYXMZZ36).
文摘WC7Co/Ti6Al4V composite coatings are deposited on the pure Ti substrate by pulse laser cladding(LC).During the laser melting process,the decomposition of WC7Co particles will lead to the evolution of microstructure and phases,which is directly related to the wear resistance and mechanism of composite coating.The microstructural evolution,phase compositions and interface reaction of WC7Co/Ti6Al4V composite coating were examined by scanning electron microscopy,energydispersive spectrum and X-ray diffraction(XRD).The hardness of different structures and abrasive resistance of composite coating were measured.The results show that the typical microstructure of LC WC7Co/Ti6Al4V composite coating can be classified into dissolved WC7Co composite structure and un-dissolved WC7Co structure.According to XRD results,there are Ti solid solution,W,TiC,VC,Co3W3C and secondary W2C in composite coating.The eutectic structure formed by the dissolved WC7Co particles consisted of W,W2C,TiC and P-Ti solid solution.The mean hardness of different structures exhibits a significant gradient distribution in composite coating.A reaction layer composed of TiC,W and W2C is also generated onto the interface between un-dissolved WC7Co particles and Ti6Al4V alloy matrix.The abrasive mechanisms of WC7Co/Ti6Al4V composite coating are mainly adhesive wear and oxidation wear during the dry sliding process.
