Here we report the WO3 thin films on F-doped SnO2 conducting glass (FTO) substrates which were prepared by using dip film-drawing method. Dip film-drawing was a simple, convenient, economical method and in largescale ...Here we report the WO3 thin films on F-doped SnO2 conducting glass (FTO) substrates which were prepared by using dip film-drawing method. Dip film-drawing was a simple, convenient, economical method and in largescale to prepare photoanodes for future applications. The FTO substrates were dipped in tungstic acid solution then film-drawn included 3, 6, 9, 12 and 15 times for prepared different thicknesses of WO3 thin film photoanodes. Then the photoa no des were employed as the electrodes in photoelectrochemical property Keywords: WO3 thin films Dip film-drawing Photoelectrochemical Thicknesses Large-scale measurements, which include scan linear sweep, repeated on/off illumination cycles, electrochemical impedanee spectroscopy and incident phot on to current conversion efficiency, respectively. The results showed that the WO3 thin films dipped 9 times with 175 nm thicknesses had the best photoelectrochemical performance of 0.067 mA·cm^-2 at 1.23 V versus RHE.展开更多
Titanium dioxide （TiO2） loaded tungsten trioxide （WO3） composite films are prepared by an E-beam vapor system. Associated with the existence of a heterojunction at the interface of TiO2 and WO3, the prepared TiO2-...Titanium dioxide （TiO2） loaded tungsten trioxide （WO3） composite films are prepared by an E-beam vapor system. Associated with the existence of a heterojunction at the interface of TiO2 and WO3, the prepared TiO2-WO3 composite film shows enhanced photocurrent density, four times than the pure WO3 film illuminated under xenon lamp, and higher incident-photon-to-current conversion e^ciency. By varying the initial TiO2 film thickness, such composite structures could be optimized to obtain the highest photocurrent density. We believe that thin TiO2 films improve the light response and increase the surface roughness of WO3 films. Furthermore, the existence of the heterojunction results in the e^cient charge carriers＇ separation, transfer process, and a lower recombination of electron-hole pairs, which is beneficial for the enhancement of photocurrent density.展开更多
Ti-doped WO3 films were prepared by the mid-frequency dual-target magnetron sputtering method. The structure and electrochromic properties of the Ti-doped WO3 films were analysed by X-Ray diffraction （XRD）, Raman sp...Ti-doped WO3 films were prepared by the mid-frequency dual-target magnetron sputtering method. The structure and electrochromic properties of the Ti-doped WO3 films were analysed by X-Ray diffraction （XRD）, Raman spectroscopy, spectrophotometer, cyclic chronoam- perometry and atomic force microscopy （AFM）. The results indicate that the erystallinity decrease after the doping of titanium, the channels for ion injection and extraction increase, the responding speed with 5.1% titanium doped becomes faster, and its circle life increases more than four times compared with the undoped WO3 film. In the coloured state, the W-O-W bonds decrease, but the W = O bonds increase. Since the W-O-W bonds break down for Li＋ ions＇ injection and more W = O bonds form, it is more convenient to inject Li＋ ions into the Ti-doped film than undoped film because more W-O-W bonds break down in the coloured state.展开更多
As essential electrochromic（EC） materials are related to energy savings in fenestration technology,tungsten oxide（WO3） films have been intensively studied recently.In order to achieve better understanding of the m...As essential electrochromic（EC） materials are related to energy savings in fenestration technology,tungsten oxide（WO3） films have been intensively studied recently.In order to achieve better understanding of the mechanism of EC properties,and thus facilitate optimization of device performance,clarification of the correlation between cation storage and transfer properties and the coloration performance is needed.In this study,transparent polycrystalline and amorphous WO3 thin films were deposited on SnO2：F-coated glass substrates by the pulsed laser deposition technique.Investigation into optical transmittance in a wavelength range of 400-800 nm measured at a current density of 130 μA·cm-2 with the applied potential ranging from 3.2 to 2.2 V indicates that polycrystalline films have a larger optical modulation of ～ 30% at 600 nm and a larger coloration switch time of 95 s in the whole wavelength range compared with amorphous films（～ 24% and 50 s）.Meanwhile,under the same conditions,polycrystalline films show a larger lithium storage capacity corresponding to a Li/W ratio of 0.5,a smaller lithium diffusion coefficient（2×10-12cm2·s-1 for Li/W=0.24） compared with the amorphous ones,which have a Li/W ratio of 0.29 and a coefficient of ～2.5×10-11cm2·s-1 as Li/W=0.24.These results demonstrate that the large optical modulation relates to the large lithium storage capacity,and the fast coloration transition is associated with fast lithium diffusion.展开更多
Pure WOand Yb:WOthin films have been synthesized by spray pyrolysis technique. Effect of Yb doping concentration on photoelectrochemical, structural, morphological and optical properties of thin films are studied. X-r...Pure WOand Yb:WOthin films have been synthesized by spray pyrolysis technique. Effect of Yb doping concentration on photoelectrochemical, structural, morphological and optical properties of thin films are studied. X-ray diffraction analysis shows that all thin films are polycrystalline nature and exhibit monoclinic crystal structure. The 3 at% Yb:WOfilm shows superior photoelectrochemical（PEC） performance than that of pure WOfilm and it shows maximum photocurrent density（Iph= 1090 μA/cm） having onset potentials around +0.3 V/SCE in 0.01 M HClO. The photoelectrocatalytic process is more effective than that of the photocatalytic process for degradation of methyl orange（MO） dye. Yb doping in WOphotocatalyst is greatly effective to degrade MO dye. The enhancement in photoelectrocatalytic activity is mainly due to the suppressing the recombination rate of photogenerated electron-hole pairs. The mineralization of MO dye in aqueous solution is studied by measuring chemical oxygen demand（COD） values.展开更多
基金Supported by the National Natural Science Foundation of China(21522603,21477050,21401082,21503142,21671083)Six Talent Peaks Project in Jiangsu Province(XCL-025)+2 种基金and the Chinese-German Cooperation Research Project(GZ1091)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX17_1774)the Excellent Youth Foundation of Jiangsu Scientific Committee(BK20170526)
文摘Here we report the WO3 thin films on F-doped SnO2 conducting glass (FTO) substrates which were prepared by using dip film-drawing method. Dip film-drawing was a simple, convenient, economical method and in largescale to prepare photoanodes for future applications. The FTO substrates were dipped in tungstic acid solution then film-drawn included 3, 6, 9, 12 and 15 times for prepared different thicknesses of WO3 thin film photoanodes. Then the photoa no des were employed as the electrodes in photoelectrochemical property Keywords: WO3 thin films Dip film-drawing Photoelectrochemical Thicknesses Large-scale measurements, which include scan linear sweep, repeated on/off illumination cycles, electrochemical impedanee spectroscopy and incident phot on to current conversion efficiency, respectively. The results showed that the WO3 thin films dipped 9 times with 175 nm thicknesses had the best photoelectrochemical performance of 0.067 mA·cm^-2 at 1.23 V versus RHE.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174137,11474215 and 21204058the Natural Science Foundation for the Youth of Jiangsu Province under Grant No BK20130284the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Titanium dioxide （TiO2） loaded tungsten trioxide （WO3） composite films are prepared by an E-beam vapor system. Associated with the existence of a heterojunction at the interface of TiO2 and WO3, the prepared TiO2-WO3 composite film shows enhanced photocurrent density, four times than the pure WO3 film illuminated under xenon lamp, and higher incident-photon-to-current conversion e^ciency. By varying the initial TiO2 film thickness, such composite structures could be optimized to obtain the highest photocurrent density. We believe that thin TiO2 films improve the light response and increase the surface roughness of WO3 films. Furthermore, the existence of the heterojunction results in the e^cient charge carriers＇ separation, transfer process, and a lower recombination of electron-hole pairs, which is beneficial for the enhancement of photocurrent density.
文摘Ti-doped WO3 films were prepared by the mid-frequency dual-target magnetron sputtering method. The structure and electrochromic properties of the Ti-doped WO3 films were analysed by X-Ray diffraction （XRD）, Raman spectroscopy, spectrophotometer, cyclic chronoam- perometry and atomic force microscopy （AFM）. The results indicate that the erystallinity decrease after the doping of titanium, the channels for ion injection and extraction increase, the responding speed with 5.1% titanium doped becomes faster, and its circle life increases more than four times compared with the undoped WO3 film. In the coloured state, the W-O-W bonds decrease, but the W = O bonds increase. Since the W-O-W bonds break down for Li＋ ions＇ injection and more W = O bonds form, it is more convenient to inject Li＋ ions into the Ti-doped film than undoped film because more W-O-W bonds break down in the coloured state.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10979069)the "Hundred Talent Program" of Chinese Academy of Sciences
文摘As essential electrochromic（EC） materials are related to energy savings in fenestration technology,tungsten oxide（WO3） films have been intensively studied recently.In order to achieve better understanding of the mechanism of EC properties,and thus facilitate optimization of device performance,clarification of the correlation between cation storage and transfer properties and the coloration performance is needed.In this study,transparent polycrystalline and amorphous WO3 thin films were deposited on SnO2：F-coated glass substrates by the pulsed laser deposition technique.Investigation into optical transmittance in a wavelength range of 400-800 nm measured at a current density of 130 μA·cm-2 with the applied potential ranging from 3.2 to 2.2 V indicates that polycrystalline films have a larger optical modulation of ～ 30% at 600 nm and a larger coloration switch time of 95 s in the whole wavelength range compared with amorphous films（～ 24% and 50 s）.Meanwhile,under the same conditions,polycrystalline films show a larger lithium storage capacity corresponding to a Li/W ratio of 0.5,a smaller lithium diffusion coefficient（2×10-12cm2·s-1 for Li/W=0.24） compared with the amorphous ones,which have a Li/W ratio of 0.29 and a coefficient of ～2.5×10-11cm2·s-1 as Li/W=0.24.These results demonstrate that the large optical modulation relates to the large lithium storage capacity,and the fast coloration transition is associated with fast lithium diffusion.
基金University Grants Commission(UGC),New Delhi,for the financial support through the project No.‘‘41-869/2012(SR)’’
文摘Pure WOand Yb:WOthin films have been synthesized by spray pyrolysis technique. Effect of Yb doping concentration on photoelectrochemical, structural, morphological and optical properties of thin films are studied. X-ray diffraction analysis shows that all thin films are polycrystalline nature and exhibit monoclinic crystal structure. The 3 at% Yb:WOfilm shows superior photoelectrochemical（PEC） performance than that of pure WOfilm and it shows maximum photocurrent density（Iph= 1090 μA/cm） having onset potentials around +0.3 V/SCE in 0.01 M HClO. The photoelectrocatalytic process is more effective than that of the photocatalytic process for degradation of methyl orange（MO） dye. Yb doping in WOphotocatalyst is greatly effective to degrade MO dye. The enhancement in photoelectrocatalytic activity is mainly due to the suppressing the recombination rate of photogenerated electron-hole pairs. The mineralization of MO dye in aqueous solution is studied by measuring chemical oxygen demand（COD） values.
