Orientational Separation of Sulfur in Petroleum Coke by Alkali Calcining and Reflux Washing

The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.

Discussion on the Treatment of Palmoplantar Keratosis by TCM Soaking and Washing

By combing the mechanism and advantages of traditional Chinese medicine(TCM)soaking and washing and combining TCM syndrome differentiation with western medicine differentiation of diseases,guided by the view that"the principle of external treatment is that of internal treatment",this article discusses the differentiation and treatment ideas of palmoplantar keratosis by TCM soaking and washing,which will provide a reference for clinical treatment.

Recent progress of waterless technologies for Jeans washing in denim industry

This review focuses on the current situation of sustainable development of denim industry and analyzes the water consumption in the production process of denim.In the washing process of jeans,the dry treatment or near-anhydrous treatment is becoming a sustainable trend to replace the traditional wet treatment.From the perspective of environmental protection,this review summarizes the recent research frontiers of water-saving technologies such as recycling and utilization of printing and dyeing wastewater,foam finishing technology,ozone washing technology and laser washing technology in denim industry.With the upgrading of textile industry and the implementation of national environmental protection laws and regulations,technologies such as foam finishing,ozone washing and laser engraving have been well-developed in the field of denim garment washing processing.In the future,the denim industry will be revolutionized by the water-free manufacturing.

Effect of Water Washing Pre-treatment on the Properties of Glass-ceramics from Incinerator Fly Ash Using Electronic Arc Furnace

Production of glass-ceramics by sintering the molten slag obtained from electric arc furnace treatment of fly ash was investigated. The effect of washing pretreatment prior to melting the fly ash on the microstructure and properties of the glass-ceramics was examined. The results show that washing pretreatment of fly ash can decrease alkali metal chloride and increase network former in fly ash, which results in the increase of peak crystallization temperature of parent glass and strengthening of properties of bending strength and chemical stability of the glass-ceramics. The optimal heat treatment temperature for parent glass of washed fly ash is 1 173 K, at which the crystalline phase of glass-ceramics is composed of gelignite （Ca2A12SiO7） and akermanite （Ca2MgSi207）. Glass-ceramics produced at optimal heat treatment temperature are excellent in term of the physical and chemical properties and leaching characteristics, indicating attractive potential as substitute of nature materials.

Bronchial Washing to Diagnose Smear-Negative Pulmonary Tuberculosis

Introduction: Bronchoscopy with bronchial washing is useful for the diagnosis of pulmonary tuberculosis (TB) when sputum smears are negative. However, its indication has not been standardized. Therefore, we conducted a retrospective study to assess the diagnostic value of bronchial washing in patients suspected with pulmonary TB. Methodology: A retrospective analysis was performed on patients diagnosed with pulmonary TB in Kosin university gospel hospital, a tertiary hospital with 969 beds in South Korea, from March 2017 to December 2018. We obtained three serial sputum samples for acid-fast bacilli (AFB) smear and culture, and all patients underwent bronchoscopy with bronchial washing for AFB smear and culture. Results: Fifty-six patients were enrolled in the study. Smear-negative pulmonary TB (SNPT) was diagnosed in 42/56 (75%) patients. Among the patients with smear-positive sputum, 14/14 (100%) showed culture-positive sputum, while smear- and culture-positive bronchial washing were seen in 7/14 (50%) and 12/14 (85.7%) patients, respectively. Among the patients with SNPT, 17/42 (40.47%) had culture-negative sputum and were diagnosed using the bronchoscopic washing. Conclusions: For patients with smear-negative sputum, it is necessary to perform bronchoscopic washing to increase the diagnostic rate of pulmonary TB. To control the transmission of pulmonary TB, it is necessary to use a fast and accurate examination method.

Investigation of Different Washing Effects on Physical and Mechanical Properties of Cotton Knitted Garments

This paper deals with three types of washing (enzyme, softener, Silicone) effects on 100% cotton Single Jersey T-shirt, Slub Single Jersey T-shirt, Double Lacoste (5% Lycra) Polo shirt, Single jersey CVC (T-shirt) and PC single Jersey (T-shirt). Typical industrial washing procedures and techniques were followed and then physico-mechanical properties were analyzed under standard condition. It is observed that after washing, weight of each garments has increased from 5% to 36%;stitch length of the constituted fabric has decreased from 1% to 10% approximately;CPI has increased 23% for CVC fabric only for enzyme treatment and for other process it has a little bit or no wash effects. Same effects found for WPI except 100% cotton and Double Lacoste. Shrinkage property both for lengthwise and widthwise remains the same except CVC and Double Lacoste knitted garments and spirality has almost unchanged except 100% cotton and slub fabric. Both the dry and wet rubbing properties have improved after any types of wash except 100% cotton on Silicone wash. Water absorbency property has increased;pH of all the samples is under controlled and lies between 4.5 and 5.0. But there is no significant change of colorfastness to wash and stain after these washing treatments.

Surfactant-Enhanced Washing of Soils Contaminated with Wasted-Automotive Oils and the Quality of the Produced Wastewater

An old automotive industrial site located at Mexico City with many years of operation and contaminated with heavy oil hydrocarbons, particularly spent oils, was assessed for restoration using the surfactant enhanced soil washing (SESW) process. The main goal of this study was to characterize the contaminated soil in terms of TPHs, BTEX, PAHs, and metals contents as well as microbiologically (total heterotrophs and specific degrading microorganisms). We also aimed to determine the surfactant type and concentration to be used in the SESW process for the automotive waste oil contaminated soil. At the end, sixteen kg of contaminated soil were washed and the produced wastewater (approximately 40 L) was characterized in terms of COD, BOD;solids, and other physico-chemical parameters. The soil contained about 14,000 mg of TPH/kg soil (heavy fraction), 0.13 mg/kg of benzo (k) fluoranthene and 0.07 mg/kg of benzo (a) pyrene as well as traces of some metals. Metals concentrations were always under the maximum concentration levels suggested by Mexican regulations. 15 different surfactants were used to identify the one with the capability to achieve the highest TPH removal. Surfactants included 5 anionics, 2 zwitterionic, 5 nonionics and 3 natural gums. Sulfopon 30 at a concentration of 0.5% offered the best surfactant performance. The TPH removals employing the different surfactants were in the range from 38% to 68%, in comparison to the soil washing with water (10% of TPH removal). Once the surfactant was selected, 70 kg of soil were washed and the resulting water contained approximately 1300 mg/L of COD, 385 mg/L of BOD (BOD/COD = 0.29), 122 mg/L of MBAS, and 212 mg/L of oil and greases, among other contaminants.

Application of Electrocoagulation and Electrolysis on the Precipitation of Heavy Metals and Particulate Solids in Washwater from the Soil Washing

Soil washing, ex situ mechanical technique, is one of the few permanent treatment alternatives to remove metal contaminants from soils by employing physical separation based on mineral processing technologies to remove discrete particles or metal-bearing particles and/or chemical extraction based on leaching or dissolving process to extract the metals from the soils into an aqueous solution. However, washwater remained from soil washing process contains discrete particulate particles along with heavy metals as solution phase to be treated separately, as well as this process can produce large amount of sludge that requires further treatment, slow metal precipitation, poor settling, the aggregation of metal precipitates. Electrical treatments including electrocoagulation and electrolysis can be effective in removing these substances from washwater. This paper reviews the theoretical models in applying electrocoagulation and electrolysis to remove heavy metals and discrete particulate particles in washwater by examining and comparing the status of washwater treatment technologies which have been undertaken, mostly in the US and EU for the period 1990-2012.

Washing and Dyeing Wastewater Treatment by Combined Nano Flocculation and Photocatalysis Processes

The research investigated the performance of combined process (flocculation pretreatment-pho- to catalysis). The characteristics of nano flocculation and photocataly were evaluated by simulated dye and surfactant wastewater. In the coagulation and settling period, decolorization rate of five dyes wastewater by nano flocculant was higher than 95%. In the photocatalytic period, degradation of twelve sodium dodecyl benzene sulfonate reached 33%. Washing and dyeing wastewater treated by combined process conformed to the “textile dyeing and finishing industry back to the water quality standard” (FZ/T 01107-2011). The results showed that the combined process was highly advanced treatment for washing and dying wastewater.

Isolation of Iron Bacteria from Washing Sludge Filters Kolda (Senegal) Water Treatment Station and Study of the Kinetics of Biological Degradation of the Iron (II)

In the present work, the treatment of synthetic waters doped with iron (II) has been studied. The treatment mechanism used in this study is the biological oxidation which consists, in test tubes, of bringing bacteria isolated on Petri dishes into contact with water containing divalent iron (II). These de-ironing bacteria (non-specific bacteria) are used to carry out laboratory biological oxidation experiments on iron (II) under different pH conditions (pH = 3.4 - 3.6, pH = 7.3 - 7.5 and pH = 9.8 - 10) and variable concentration of iron (II). Biological treatment trials included different concentrations of iron during time intervals of a day. Examination of the elimination kinetics of Iron (II) indicates a removal rate of 59.453% for an initial iron concentration in the synthetic solution of 1 mg·L−1 at basic pH (pH = 9.8 - 10). Therefore, the degradation of divalent iron by this method seems to be quite effective, but it should be noted that biological nitrification is impaired by the presence of high iron concentrations above 5 mg·L−1.

Washing Defects and Remedial Actions of Denim Garments and Statistical Review of Denim Sectors in Emerging Economy

This paper aimed to identify the washing defects of denim garments and the remedies for these washing defects of denim garments in Bangladesh.The other purpose of this paper is to explain how such errors are related to the waste,production,and production costs of denim clothing.It also provides a statistical review of the denim sector in Bangladesh as compared to other countries.This paper is conveyed based on theoretical and statistical.It appears washing defects of denim garment,and their remedial actions and reveals the effect of washing defects on wastage,production,and production cost of denim garments.This research paper shows more washing defects of denim garments in Bangladesh.The statistical review displays that Bangladesh is exporting denim products nearly 200 million pieces every year over the world and ranks as the second-largest denim garments exporter after China.By studying this paper,the manufacturer of denim garments in Bangladesh and other countries will be conscious of these defects and able to minimize these defects that will help improve the economy all over the world.

Recycling of waste foundry sands by chemical washing method

This study aims to remove the metals(inorganic and heavy metals) in waste foundry sand(WFS)via chemical washing method. Washed waste foundry sand(WWFS) samples were obtained by using triptych washing successively with 5 M HCl, 5 M H_2SO_4 and 5 M NaOH solutions. Analysis on functional groups,micropores, heavy metals,and inorganic components of WFS and WWFS was carried out by using FT-IR, SEM and XRF. Results show that the concentration values of some inorganic components such as Ca, Fe, Mg, S were decreased, and the maximum removal percentage of these inorganic components are 47%, 19%, 32%, and 8%,respectively. The concentration values for each of the heavy metals of WWFS are below of limit values given in App-3 List of Regulation on General Principles of Waste Management. The removal percentages of Pb, As and Zn elements are 100%, 71%, and 40%, respectively. The findings of this research suggest that WWFS can be used in more applications due to its ability to remove heavy metals and some other inorganic components.

APPLICATIONS OF FLOCCULANT IN BLEACHING AND WASHING OF KAOLIN

The difficulties of washing during the dressing of kaolin ore have been analyzed, the multistep intermittent washing model has been deduced, and effective methods for dealing with the difficulties were put forward. Experimental results show that the bleaching and washing process was enhanced, the washing time was shortened and the consumption of water was reduced by means of adding flocculant.

Synthesis of Super Plasticizer NF-30 from Coal Coking by Product Washing Oil and Performance Analysis

Super plasticizer was synthesized by using coal coking by product washing oil and industrial naphthalene. The results show that sulfonationt time （2.5 h）, sulfonation temperature （160 ℃） and condensation time （5.0 h） are key factors. Adding oxidizing agent MO in the course of synthesis can decrease the emission of SO2 in exhaust （20%）. Compared with NF, NF-30 have some advantages in lower cost, high water reducing rate （19.7%） and optimum early strengths. Moreover, TGA-DTA and SEM analysis were adopted to research the NF-30 modified concrete on hydyation mechanism. The analysis show that, compared with NF, there are a large number of hydration products such as Ca （OH）2, C-S-H, AFt etc of NF-30, the structure of NF-30 is dense and the performance is good.

Plasma-induced graft polymerization on the surface of aramid fabrics with improved omniphobicity and washing durability

Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally friendly C6 from a perfluoralkyl methlacrylate copolymer emulsion,AG-E081,was performed and a durable omniphobic fabric was achieved.C6 is an ecological alternative to C8(eight CF2 groups)fluorinated compounds,and it was thereafter successfully incorporated into aramid fabric to achieve a durable superomniphobic surface.The fabric became water and oil repellent with an extremely high water contact angle of 180°.As tested by the water spray AATCC test and hydrocarbon resistance test,the as-prepared fabric gained 100°(ISO 5)and grade number 4 respectively.Furthermore,the fabrics also showed significantly improved washing durability after ten washing cycles.By scanning electron microscopy(SEM),Fourier-transform infrared spectroscopy(FTIR)and x-ray photoelectron spectroscopy(XPS)tests,it is indicated that the durable superomniphobicity can be attributed to the roughness and activation of the aramid surface by the plasma pre-treatment,which induces more adsorption and chemical graft of the C6 copolymer.

Role of preputial washing in reducing microbial load and improving bovine semen quality

Quality semen production remains the main focus and objective of semen processing laboratories throughout the world. Bacterial and other microbial contaminants affect the semen quality and hence the fertility, and also lead to reproductive disorders as well as lower conception rates and increased embryonic mortality, abortion and other complications in females. Microbial contamination affects the semen adversely, by exerting direct spermicidal effect, formation of reactive oxygen species, toxin production, adherence with spermatozoa, deriving nutrients and oxygen from the medium and thus competing with spermatozoa for the factors of growth and normal functioning. Despite hygienic measures, several ubiquitous and opportunistic microbes find their ways into semen during collection, processing, and storage of semen, and survive even during freezing. Stringent sanitary precautions are therefore required at every step of collecting semen and its processing. Preputial cavity is considered as main source of semen contaminating microorganisms. Flushing the preputial cavity with normal saline or any suitable liquid combination with antimicrobial activity, prior to semen collection reduces the microbial load and thereby improves the semen quality.

MULTISTAGE STIRRING, LEACHING AND WASHING TOWER & ITS APPLICATION IN Re ORE EXTRACTION

The multistage stirring,leaching and washing tower(MSLWT)was designed to make it possible to finish leaching and washing of ore in one equipment.The residence time distributions(RTD)of MSLWT were studied.Peclet number,τ,σ^(2) were calculated based on the diffusion model,the results indicate the diffusion model is suitable to MSLWT.The application of MSLWT to the leaching of rare earth ore increases the recovery to above 92%and reduces the washing factor to less than 0.06.

Optimization of Conditions of Concentrating Protein in Rapeseed Meal by Ultrasonic-assisted Alcohol Washing

This study was performed to optimize the conditions for concentrating protein in commercial rapeseed meal by ultrasonic-assisted alcohol washing method. The effects of sonication time,particle size,ultrasonic power and liquid to solid ratio on protein content were investigated. The result showed that the optimal conditions for concentrating protein in rapeseed meal were: sonication time of 40 min,particle size of 40 mesh,ultrasonic power of 800 W and liquid to solid ratio of 9∶ 1. Under these conditions,the protein content in rapeseed meal was increased to 55. 47%,which was 10. 43% higher than that in rapeseed meal not treated by sonication.

Emission Behaviors of Submicron Particles(PM_(1))Generated by the Combustion of Sesame Stalk after Combined Water Washing and Carbonization Pretreatment

Pretreatment before biomass combustion is significant for its efficient utilization and that combined water washing and carbonization can be efficient.An agricultural processing residues sesame stalk was selected and carried out two pretreatments separately,i.e.,water washing-torrefaction(W-T)and torrefaction-water washing(T-W),to explore the effect on the fuel properties,combustion characteristics and particulate matter(PM)emission.The obtained biochar was also combusted under air and oxy50(CO_(2):O_(2)=50:50)conditions for the sake of investigating the effect of pretreatment and combustion atmosphere.The results indicate that,W-T and T-W both not only have great effect on the improvement of fuel properties but also reduce the content of water-soluble elements like K,Cl,etc.Due to the difference in hydrophobicity,the biochar obtained by W-T have the optimal fuel properties.At the same time,the pretreatment also hinder the combustion in a certain extent in which the comprehensive combustion characteristics(SN)show a downward trend.Furthermore,both two pretreatments have obvious benefit on the reduction of PM_(1)emission and W-T have the best effect related to the higher removal efficiency of inorganic elements(especially K+Na+Cl+S).Under oxy50 condition,the oxygen concentration and combustion temperature is higher,improving the sulfation of K and vaporization of Ca,P and Mg which result in weakening in the pretreatment reduction effect on PM_(1)emission.