Liquefied natural gas(LNG)is regarded as one of the cleanest fossil fuel and has experienced significant developments in recent years.The liquefaction process of natural gas is energy-intensive,while the regasificatio...Liquefied natural gas(LNG)is regarded as one of the cleanest fossil fuel and has experienced significant developments in recent years.The liquefaction process of natural gas is energy-intensive,while the regasification of LNG gives out a huge amount of waste energy since plenty of high grade cold energy(-160℃)from LNG is released to sea water directly in most cases,and also sometimes LNG is burned for regasification.On the other hand,liquid air energy storage(LAES)is an emerging energy storage technology for applications such as peak load shifting of power grids,which generates 30%-40%of compression heat(-200℃).Such heat could lead to energy waste if not recovered and used.The recovery of the compression heat is technically feasible but requires additional capital investment,which may not always be economically attractive.Therefore,we propose a power plant for recovering the waste cryogenic energy from LNG regasification and compression heat from the LAES.The challenge for such a power plant is the wide working temperature range between the low-temperature exergy source(-160℃)and heat source(-200℃).Nitrogen and argon are proposed as the working fluids to address the challenge.Thermodynamic analyses are carried out and the results show that the power plant could achieve a thermal efficiency of 27%and 19%and an exergy efficiency of 40%and 28%for nitrogen and argon,respectively.Here,with the nitrogen as working fluid undergoes a complete Brayton Cycle,while the argon based power plant goes through a combined Brayton and Rankine Cycle.Besides,the economic analysis shows that the payback period of this proposed system is only 2.2 years,utilizing the excess heat from a 5 MW/40 MWh LAES system.The findings suggest that the waste energy based power plant could be co-located with the LNG terminal and LAES plant,providing additional power output and reducing energy waste.展开更多
The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories...The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories, rivers and lakes. The waste and sludge are very harmful to water organisms, human health and drinking water, and directly affect the environment. Sludge and waste also occupy large areas of land. There are several methods to treat waste and sludge, such as burial, chemical treatment and incineration. Incineration is more effective than the展开更多
An environmental and economic assessment of the development of a plasma-chemical reactor equipped with plasma torches for the environmentally friendly treatment of waste streams by plasma is outlined with a view to th...An environmental and economic assessment of the development of a plasma-chemical reactor equipped with plasma torches for the environmentally friendly treatment of waste streams by plasma is outlined with a view to the chemical and energetic valorization of the sustainability in the Kingdom of Saudi Arabia(KSA). This is especially applicable in the pilgrimage season in the city of Makkah, which is a major challenge since the amount of waste was estimated at about 750 thousand tons through Arabic Year 1435 H(2015), and is growing at a rate of 3%–5% annually. According to statistics, the value of waste in Saudi Arabia ranges between 8 and 9 billion EUR. The Plasma-Treatment Project(PTP) encompasses the direct plasma treatment of all types of waste(from source and landfill), as well as an environmental vision and economic evaluation of the use of the gas produced for fuel and electricity production in KSA, especially in the pilgrimage season in the holy city Makkah. The electrical power required for the plasmatreatment process is estimated at 5000 kW(2000 kW used for the operation of the system and 3000 kW sold), taking into account the fact that:(1) the processing capacity of solid waste is 100 tons per day(2) and the sale of electricity amounts to 23.8 MW at 0.18 EUR per kWh.(3) The profit from the sale of electricity per year is estimated at 3.27 million EUR and the estimated profit of solid-waste treatment amounts to 6 million EUR per year and(4) the gross profit per ton of solid waste totals 8 million EUR per year. The present article introduces the first stage of the PTP, in Makkah in the pilgrimage season, which consists of five stages:(1) study and treatment of waste streams,(2) slaughterhouse waste treatment,(3) treatment of refuse-derived fuel,(4)treatment of car tires and(5) treatment of slag(the fifth stage associated with each stage from the four previous stages).展开更多
In Japan, each municipality generally has its own municipal solid waste incineration facilities because of the principle of self-management in the respective territories. Typically, a small municipality often owns a s...In Japan, each municipality generally has its own municipal solid waste incineration facilities because of the principle of self-management in the respective territories. Typically, a small municipality often owns a small facility. However, a large facility which can run continuously at high temperature with stability would be preferable if the dioxin generation mechanism is to be considered. Accordingly, municipalities in contiguous areas should cooperate mutually by using a large facility. To evaluate the effect of the concentration of large facilities, the authors created a GIS (Geographic Information System) based database of combustible waste generation at town level in Shizuoka Prefecture. Focusing on large facilities in Shizuoka City and superannuated facilities in Shida area, the authors evaluated the effect of the concentration of large facilities in Shizuoka city on utilization rate of facilities, energy balance and CO2 emissions. Our results showed the amount of light oil consumption and CO2 emissions increased because the mileage distance of garbage collection trucks becomes longer. However, the utilization rates of facilities and the amount of energy recovery from waste are improved. From these standpoints, the authors conclude that the concentration of large facilities is better compared to a single municipality based facility.展开更多
基金partial support of UK EPSRC under grants EP/V012053/1,EP/S032622/1,EP/P004709/1,EP/P003605/1 and EP/N032888/1the British Council under 2020-RLWK12-10478 and 2019-RLWK11-10724。
文摘Liquefied natural gas(LNG)is regarded as one of the cleanest fossil fuel and has experienced significant developments in recent years.The liquefaction process of natural gas is energy-intensive,while the regasification of LNG gives out a huge amount of waste energy since plenty of high grade cold energy(-160℃)from LNG is released to sea water directly in most cases,and also sometimes LNG is burned for regasification.On the other hand,liquid air energy storage(LAES)is an emerging energy storage technology for applications such as peak load shifting of power grids,which generates 30%-40%of compression heat(-200℃).Such heat could lead to energy waste if not recovered and used.The recovery of the compression heat is technically feasible but requires additional capital investment,which may not always be economically attractive.Therefore,we propose a power plant for recovering the waste cryogenic energy from LNG regasification and compression heat from the LAES.The challenge for such a power plant is the wide working temperature range between the low-temperature exergy source(-160℃)and heat source(-200℃).Nitrogen and argon are proposed as the working fluids to address the challenge.Thermodynamic analyses are carried out and the results show that the power plant could achieve a thermal efficiency of 27%and 19%and an exergy efficiency of 40%and 28%for nitrogen and argon,respectively.Here,with the nitrogen as working fluid undergoes a complete Brayton Cycle,while the argon based power plant goes through a combined Brayton and Rankine Cycle.Besides,the economic analysis shows that the payback period of this proposed system is only 2.2 years,utilizing the excess heat from a 5 MW/40 MWh LAES system.The findings suggest that the waste energy based power plant could be co-located with the LNG terminal and LAES plant,providing additional power output and reducing energy waste.
文摘The waste referred to includes solid waste and sludge. Solid waste is mainly from urban garbage and industrial waste. Sludge is from water treatment factories, paper mills, chemical factories, pharmaceutical factories, rivers and lakes. The waste and sludge are very harmful to water organisms, human health and drinking water, and directly affect the environment. Sludge and waste also occupy large areas of land. There are several methods to treat waste and sludge, such as burial, chemical treatment and incineration. Incineration is more effective than the
文摘An environmental and economic assessment of the development of a plasma-chemical reactor equipped with plasma torches for the environmentally friendly treatment of waste streams by plasma is outlined with a view to the chemical and energetic valorization of the sustainability in the Kingdom of Saudi Arabia(KSA). This is especially applicable in the pilgrimage season in the city of Makkah, which is a major challenge since the amount of waste was estimated at about 750 thousand tons through Arabic Year 1435 H(2015), and is growing at a rate of 3%–5% annually. According to statistics, the value of waste in Saudi Arabia ranges between 8 and 9 billion EUR. The Plasma-Treatment Project(PTP) encompasses the direct plasma treatment of all types of waste(from source and landfill), as well as an environmental vision and economic evaluation of the use of the gas produced for fuel and electricity production in KSA, especially in the pilgrimage season in the holy city Makkah. The electrical power required for the plasmatreatment process is estimated at 5000 kW(2000 kW used for the operation of the system and 3000 kW sold), taking into account the fact that:(1) the processing capacity of solid waste is 100 tons per day(2) and the sale of electricity amounts to 23.8 MW at 0.18 EUR per kWh.(3) The profit from the sale of electricity per year is estimated at 3.27 million EUR and the estimated profit of solid-waste treatment amounts to 6 million EUR per year and(4) the gross profit per ton of solid waste totals 8 million EUR per year. The present article introduces the first stage of the PTP, in Makkah in the pilgrimage season, which consists of five stages:(1) study and treatment of waste streams,(2) slaughterhouse waste treatment,(3) treatment of refuse-derived fuel,(4)treatment of car tires and(5) treatment of slag(the fifth stage associated with each stage from the four previous stages).
文摘In Japan, each municipality generally has its own municipal solid waste incineration facilities because of the principle of self-management in the respective territories. Typically, a small municipality often owns a small facility. However, a large facility which can run continuously at high temperature with stability would be preferable if the dioxin generation mechanism is to be considered. Accordingly, municipalities in contiguous areas should cooperate mutually by using a large facility. To evaluate the effect of the concentration of large facilities, the authors created a GIS (Geographic Information System) based database of combustible waste generation at town level in Shizuoka Prefecture. Focusing on large facilities in Shizuoka City and superannuated facilities in Shida area, the authors evaluated the effect of the concentration of large facilities in Shizuoka city on utilization rate of facilities, energy balance and CO2 emissions. Our results showed the amount of light oil consumption and CO2 emissions increased because the mileage distance of garbage collection trucks becomes longer. However, the utilization rates of facilities and the amount of energy recovery from waste are improved. From these standpoints, the authors conclude that the concentration of large facilities is better compared to a single municipality based facility.