Treatment of Textile Industrial Wastewater from Water Jet Loom Machine

The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.

Aviation-oriented Micromachining Technology—Micro-ECM in Pure Water

This article proposes a precise and ecofriendly micromachining technology for aerospace application called electrochemical machining in pure water （PW-ECM）. On the basis of the principles of water dissociation, a series of test setups and tests are devised and performed under different conditions. These tests explain the need for technological conditions realizing PW-ECM, and further explore the technological principles. The results from the tests demonstrate a successful removal of electrolytic slime by means of ultrasonic vibration of the workpiece. To ensure the stability and reliability of PW-ECM process, a new combined machining method of PW-ECM assisted with ultrasonic vibration （PW-ECM/USV） is devised. Trilateral and square cavities and holes as well as a group of English alphabets are worked out on a stainless steel plate. It is confirmed that PW-ECM will be probably an efficient new aviation precision machining method.

Water inrush evaluation of coal seam floor by integrating the water inrush coefficient and the information of water abundance

The method of singular coefficient of water inrush to achieve safety mining has limitation and one sidedness. Aiming at the problem above, large amounts of data about water inrush were collected. Then the data, including the maximum water inrush, water inrush coefficient and water abundance in aquifers of working face, were processed by the statistical analysis. The analysis results indicate that both water inrush coefficient and water abundance in aquifers should be taken into consideration when evaluating the danger of water inrush from coal seam floor. The prediction model of safe-mining evaluation grade was built by using the support vector machine, and the result shows that this model has high classification accuracy. A feasible classification system of water-inrush safety evaluation can be got by using the data visualization method which makes the implicit support vector machine models explicit.

Micro water dissolution machining principle and its application in ultra-precision processing of KDP optical crystal

In this paper, a micro water dissolution machining （MWDM） principle is proposed for machining potassium dihydrogen phosphate （KDP） crystal using water-in-oil micro-emulsion as an abrasive-free polishing fluid. In addition, two instances of the application of this principle to ultra-precision machining of KDP crystals are presented. Computer-controlled optical surfacing （CCOS） and diamond wire cutting （DWC） process were carried out according to the MWDM principle. In the case of the CCOS technology, it is found that the micro-waviness was removed completely by following the MWDM principle. The surface undulation decreased from 40 nm to less than 10 nm, and the surface root-mean-square （rms） roughness obviously reduced from 8.147 to 2.660 nm. In the case of the DWC process, the surface rms roughness reduced from 8.012 to 2.391 gm, and the cutting efficiency was improved. These results indicate that the MWDM principle can efficiently improve the machining quality of KDP optical crystal and has a great potential to machine water-soluble materials.

Investigation on the cleaning of KDP ultra-precision surface polished with micro water dissolution machining principle

A potassium dihydrogen phosphate(KDP) optical crystal was machined to an ultra-precision surface with water-in-oil(W/O) micro emulsion polishing fluid. The micro water dissolution principle utilized in the machining process is discussed, its planarization mechanism is illustrated, and an ultra-precision polished surface with 2.205 nm RMS roughness is obtained. However, a substantial quantity of residual contamination remained on the polished surface after machining. This can seriously impact the optical performance of the crystal, and so it must be removed. Fourier transform infrared(FTIR) spectroscopy was used to conduct an investigation into the composition of the surface residue, and the results showed that the residue was comprised of organic chemicals with hydrocarbon chains and aromatic ether, i.e., mostly the polishing fluid. The cleaning method and the principle on which the KDP ultra precision surface investigation is based are discussed in detail, and the cleaning experiments with selected KDP-compatible organic solvents were then performed. FTIR transmittance spectra measurement and microscopic observations were employed to assess the effects of the cleaning process on the surface of the KDP crystal. The results showed that toluene cleaning achieved the most desirable results. This cleaning method produced a surface roughness of 1.826 nm RMS, which allows the KDP crystal to be applied to subsequent engineering applications.