Superwetting Ag/α-Fe_(2)O_(3) anchored mesh with enhanced photocatalytic and antibacterial activities for efficient water purification

Superwetting materials have drawn unprecedented attention in the treatment of oily wastewater due to their preferable anti-fouling property and selective oil/water separation.However,it is still a challenge to fabricate multifunctional and environmentally friendly materials,which can be stably applied to purify the actual complicated wastewater.Here,a Ag/Ag/α-Fe_(2)O_(3) heterostructure anchored copper mesh was intentionally synthesized using a facile two-step hydrothermal method.The resultant mesh with superhydrophilicity and underwater superoleophobicity was capable of separating various oil/water mixtures with superior separation efficiency and high permeationflux driven by gravity.Benefiting from the joint effects of the smaller band gap of Ag/α-Fe_(2)O_(3) heterojunction,inherent antibacterial capacity of Ag/α-Fe_(2)O_(3) and Ag nanoparticles,favorable conductive substrate,as well as the hierarchical structure with superwettability,such mesh presented remarkably enhanced degradation capability toward organic dyes under visible light irradiation and antibacterial activity against both Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)compared with the pure Ag/α-Fe_(2)O_(3) coated mesh.Impressively,the mesh exhibited bifunctional water purification performance,in which organic dyes were eliminated simultaneously from water during oil/water separation in onefiltration process.More importantly,this mesh behaved exceptional chemical resistance,mechanical stability and long-term reusability.Therefore,this material with multifunctional integration may hold promising potential for steady water purification in practice.

Polysulfide nanoparticles-reduced graphene oxide composite aerogel for efficient solar-driven water purification

Along with the environmental pollution, the scarcity of clean water seriously threatens the sustainable development of human society.Recently, the rapid development of solar evaporators has injected new vitality into the field of water purification. However, the industry faces a considerable challenge of achieving comprehensive purification of ions, especially the efficient removal of mercury ions. In this work, we introduce an ideal mercury-removal platform based on facilely and cost-effectively synthesized polysulfide nanoparticles(PSNs). Further development of PSN-functionalized reduced graphene oxide(PSN-rGO) aerogel evaporator results in achieving a high evaporation rate of 1.55 kg m^(-2)h^(-1)with energy efficiency of 90.8% under 1 sun. With the merits of interconnected porous structure and adsorption ability, the photothermal aerogel presents overall purification of heavy metal ions from wastewater. During solar desalination, salt ions can be rejected with long-term stability. Compared with traditional water purification technologies, this highly efficient solar evaporator provides a new practical method to utilize clean energy for clean water production.

Research progress of novel adsorption processes in water purification: A review

As an effective, efficient, and economic approach for water purification, adsorbents and adsorption processes have been widely studied and applied in different aspects for a long time. In the recent years, a lot of novel adsorption processes have been developed for enhancing the efficiency of removing the organic and inorganic contaminants from water. This article reviews some new adsorbents and advanced adsorption methods that specialize in their compositions, structures, functions, and characteristics used in water treatment. The review emphasizes adsorption/catalytic oxidation process, adsorption/catalytic reduction process, adsorption coupled with redox process, biomimetic sorbent and its sorption behaviors of POPs, and modified adsorbents and their water purification efficiency.

The progress of catalytic technologies in water purification:A review

Catalytic technologies have been paid increasing attention in refractory pollutants abatement due to its practical and potential values in water purification. As effective and efficient approaches for water purification, Fenton＇s reagent, ozonation, electrochemical and photocatalytic methods have been widely studied and applied in different aspects and have been reviewed by several articles. In recent years, some novel catalytic processes based on above processes have been developed for enhancing the efficiency of removing the organics from water. This review emphasized on the recent development of heterogeneous catalytic ozonation, electrocatalysis in respect of novel electrodes and electro-Fenton method, photoelectrocatalysis process and photoelectron-Fenton in water purification. It was also an attempt to propose general ideas about mechanism and principle enhancing the catalytic efficiency for the degradation and the mineralization of organics in water.

MOF-Like 3D Graphene-Based Catalytic Membrane Fabricated by One-Step Laser Scribing for Robust Water Purification and Green Energy Production

Increasing both clean water and green energy demands for survival and development are the grand challenges of our age.Here,we successfully fabricate a novel multifunctional 3D graphene-based catalytic membrane(3D-GCM)with active metal nanoparticles(AMNs)loading for simultaneously obtaining the water purification and clean energy generation,via a“green”one-step laser scribing technology.The as-prepared 3D-GCM shows high porosity and uniform distribution with AMNs,which exhibits high permeated fluxes(over 100 L m^(−2) h^(−1))and versatile super-adsorption capacities for the removal of tricky organic pollutants from wastewater under ultra-low pressure-driving(0.1 bar).After adsorption saturating,the AMNs in 3D-GCM actuates the advanced oxidization process to self-clean the fouled membrane via the catalysis,and restores the adsorption capacity well for the next time membrane separation.Most importantly,the 3D-GCM with the welding of laser scribing overcomes the lateral shear force damaging during the long-term separation.Moreover,the 3D-GCM could emit plentiful of hot electrons from AMNs under light irradiation,realizing the membrane catalytic hydrolysis reactions for hydrogen energy generation.This“green”precision manufacturing with laser scribing technology provides a feasible technology to fabricate high-efficient and robust 3D-GCM microreactor in the tricky wastewater purification and sustainable clean energy production as well.

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.

Microparticle collection for water purification based on laser-induced convection

Water purification is required for environmental protection. In this paper, we propose and demonstrate a rapid, effective and low-cost approach to collect numerous impurities（microparticles） in water on the basis of laser-induced thermal convection. We introduce a heat source by using a fiber tip, which is fabricated into a non-adiabatic-tapered shape. In order to improve the laser power absorption efficiency, we coat a gold film with a thickness of 300 nm on the fiber tip. Due to absorption, the laser power transferred from the fiber to the water results in thermal convection. The forces generated from the thermal convection drive the microparticles to move towards the fiber tip, thereby performing microparticle collection and achieving water purification. Laser-induced thermal convection provides a simple, high-efficiency and low-cost method of collecting microparticles, which is a suitable and convenient for local water purification.

Study on the treatment of eutrophic water with a new integrative apparatus for water purification

This paper studied the treatment of the landscape river in ChangZhou Scientific and Educational Town by a new integrative apparatus for water purification, which used ozone pre-oxidation-moDified clay-ozone biological activated carbon integrated process. The results indicate that the effectiveness of the algal removal with mentioned integrated process is much higher and the apparatus can operate stably. When the turbidity, chemical oxygen demand （CODMn）, total nitrogen （TN）, total phosphorus （TP） and algae densities of the raw water are 29-38 NTU, 7.45-7.79 mg/L, 2.496-2.981 mag/L, 0.237-0.255 mg/L and 5.78-7.94×10^8 cells/L respectively, it can be reduced to 0.8-1.7 NTU, 1.69-2.84 rag/L, 0.579-0.692mg/L, 0.013-0.038 mg/L, 0.06-0.38×10^8 cells/L. The average removal rates of turbidity, CODMn, TN, TP and algae density can reach 96.4%, 71.5%, 76.8%, 92.0% and 96.9% respectively. The treated water can meet the requirements of class Ⅰ- Ⅱ in Environmental Quality Standard, for Surface Water.

Green Liver Systems for Water Purification:Using the Phytoremediation Potential of Aquatic Macrophytes for the Removal of Different Cyanobacterial Toxins from Water

The protection and reasonable use of freshwater is one of the main goals for our future, as water is most important for all organisms on earth including humans. Due to pollution, not only with xenobiotics, but also with nutrients, the status of our water bodies has changed drastically. Excess nutrient load induces eutrophication processes and, as a result, massive cyanobacterial blooms during the summer times. As cyanobacteria are known to produce several toxic secondary metabolites, the so-called cyanotoxins, exhibiting hepato-, neuro- and cell-toxicity, a potential risk is given, when using this water. There is an urgent need to have a water purification system, which is able to cope with these natural toxins. Using aquatic plants as a Green Liver, the Green Liver System?, was developed, able to remove these natural pollutants. To test the ability of the Green Liver System?, several cyanobacterial toxins including artificial and natural mixtures were tested in a small-scale laboratory system. The results showed that within 7 - 14 days a combination of different aquatic macrophytes was able to remove a given toxin amount (10 μg·L-1) by 100%. The phytoremediation technology behind the Green Liver Systems? uses the simple ability of submerged aquatic plants to uptake, detoxify and store the toxins, without formation and release of further metabolites to the surrounding water.

Jellyfish-inspired alginate composite hydrogel filter prepared by macro-micro double bionic strategy for efficient water purification

Recently,research on hydrogel materials with a porous structure and superior water absorption capabilities significantly grown.However,the hydrogel under gravity-driven separation conditions often exhibit an unstable pore structure,poor mechanical properties,and limited functionality.To this end,this work presents a novel approach that combines a macro-micro double bionic strategy with a triple crosslinking method to develop a multifunctional alginate composite hydrogel filter(2%-SA-κCG-PVA-Ca^(2+),2%-SKP-Ca^(2+)for short)with a stable pore structure and superior mechanical properties,which possessed an umbrella-shaped structure resembling that of jellyfish.The 2%-SKPCa^(2+)filter was synthesized using polyvinyl alcohol(PVA)as a stable structure-directing agent,and sodium alginate(SA)andκ-carrageenan(κ-CG)as polymer hydrogels.The distinctive umbrellashaped hydrogel of 2%-SKP-Ca^(2+)filter,formed through the triple crosslinking method,overcomes the limitations of unstable pore structure and poor durability seen in hydrogels prepared by traditional crosslinking methods.Furthermore,the utilization of the 2%-SKP-Ca^(2+)filter in water treatment demonstrates its good selective permeability,excellent resistance to fouling,and extended longevity,which enables it to simultaneously achieve the multifunctional water purification and the coating of multi-substrate anti-fouling coatings.Therefore,not only does this research provide an efficient,multifunctional,highly pollution-resistant preparation method for designing a new filter,but it also confirms the application prospect of the macro-micro dual bionic strategy developed in this study in complex water treatment.

Unveiling an S-scheme F–Co_(3)O_(4)@Bi_(2)WO_(6) heterojunction for robust water purification

Devising a desirable nano-heterostructured photoelectrode based on the charge transfer kinetics mechanism is a pivotal strategy for implementing efficient photoelectrocatalytic(PEC)technology,since the charge separation and utilization efficiency of a photoelectrode is critical to its PEC performance.Herein,we fabricate a F–Co_(3)O_(4)@Bi_(2)WO_(6) core–shell hetero-array photoanode by coupling Bi_(2)WO_(6) nanosheets with F–Co_(3)O_(4) nanowires using a simple solvothermal solution method.The three-dimensional hierarchical heterostructure has a homogeneous chemical interface,helping it to promote an S-scheme-based carrier transport kinetics and maintain excellent cycling stability.Charge density difference calculations verify the electron migration trend from F–Co_(3)O_(4) to Bi_(2)WO_(6) upon hybridization and the formation of an internal electric field in the heterojunction,consistent with the S-scheme mechanism,which is identified by in situ irradiation X-ray photoelectron spectroscopy and by ultraviolet photoelectron spectroscopy.The optimized F–Co_(3)O_(4)@Bi_(2)WO_(6)-2 photoelectrode achieves high carrier utilization efficiency and exhibits superior PEC degradation performance for various organic pollutants,including reactive brilliant blue KN-R,rhodamine B,sulfamethoxazole,and bisphenol A.This work not only reveals that F–Co_(3)O_(4)@Bi_(2)WO_(6)-2 is effective for PEC water remediation but also provides a strategy to enhance carrier transport kinetics by designing binary oxides.

Boron and nitrogen co-doped porous carbon derived from sodium alginate enhanced capacitive deionization for water purification

Capacitive deionization can alleviate water shortage and water environmental pollution, but performances are greatly determined by the electrochemical and desalination properties of its electrode materials. In this work, B and N co-doped porous carbon with micro-mesoporous structures is derived from sodium alginate by a carbonization, activation, and hydrothermal doping process, which exhibits large specific surface area (2587 m^(2)·g^(‒1)) and high specific capacitance (190.7 F·g^(‒1)) for adsorption of salt ions and heavy metal ions. Furthermore, the materials provide a desalination capacity of 26.9 mg·g−1 at 1.2 V in 500 mg·L^(‒1) NaCl solution as well as a high removal capacity (239.6 mg·g^(‒1)) and adsorption rate (7.99 mg·g^(‒1)·min^(‒1)) for Pb2+ with an excellent cycle stability. This work can pave the way to design low-cost porous carbon with high-performances for removal of salt ions and heavy metal ions.

A hybrid fuel cell for water purification and simultaneously electricity generation

The development of highly efficient energy conversion technologies to extract energy from wastewater is urgently needed,especially in facing of increasing energy and environment burdens.Here,we successfully fabricated a novel hybrid fuel cell with BiOCl-NH_(4)PTA as photocatalyst.The polyoxometalate(NH_(4)PTA)act as the acceptor of photoelectrons and could retard the recombination of photogenerated electrons and holes,which lead to superior photocatalytic degradation.By utilizing BiOCl-NH_(4)PTA as photocatalysts and Pt/C air-cathode,we successfully constructed an electron and mass transfer enhanced photocatalytic hybrid fuel cell with flow-through field(F-HFC).In this novel fuel cell,dyes and biomass could be directly degraded and stable power output could be obtained.About 87%of dyes could be degraded in 30 min irradiation and nearly 100%removed within 90 min.The current density could reach up to~267.1μA/cm^(2);with maximum power density(Pmax)of~16.2μW/cm^(2) with Rhodamine B as organic pollutant in F-HFC.The power densities were 9.0μW/cm^(2),12.2μW/cm^(2),and 13.9μW/cm^(2) when using methyl orange(MO),glucose and starch as substrates,respectively.This hybrid fuel cell with BiOCl-NH_(4)PTA composite fulfills the purpose of decontamination of aqueous organic pollutants and synchronous electricity generation.Moreover,the novel design cell with separated photodegradation unit and the electricity generation unit could bring potential practical application in water purification and energy recovery from wastewater.

Effects of advanced oxidation pretreatment on residual aluminum control in high humic acid water purification

Due to the formation of disinfection by-products and high concentrations of Al residue in drinking water purification, humic substances are a major component of organic matter in natural waters and have therefore received a great deal of attention in recent years. We investigated the effects of advanced oxidation pretreatment methods usually applied for removing dissolved organic matters on residual Al control. Results showed that the presence of humic acid increased residual Al concentration notably. With 15 mg/L of humic acid in raw water, the concentrations of soluble aluminum and total aluminum in the treated water were close to the quantity of Al addition. After increasing coagulant dosage from 12 to 120 mg/L, the total-Al in the treated water was controlled to below 0.2 mg/L. Purification systems with ozonation, chlorination, or potassium permanganate oxidation pretreatment units had little effects on residual Al control; while UV radiation decreased Al concentration notably. Combined with ozonation, the effects of UV radiation were enhanced. Optimal dosages were 0.5 mg O 3 /mg C and 3 hr for raw water with 15 mg/L of humic acid. Under UV light radiation, the combined forces or bonds that existed among humic acid molecules were destroyed; adsorption sites increased positively with radiation time, which promoted adsorption of humic acid onto polymeric aluminum and Al（OH） 3 （s）. This work provides a new solution for humic acid coagulation and residual Al control for raw water with humic acid purification.

Water Purification： Adsorption over Metal-Organic Frameworks

Water pollution relating to human beings＇ health is a universal problem across community society. Highly efficient, economically feasible and easily achievable approaches are long-sought-after for water purification. Adsorption processes with porous materials （e.g. zeolites, activated carbon, silica gel, metal-organic frameworks （MOFs）） have drawn much attention in this field during past decades. In it, MOFs with numerous active sites, uniform porosity and tailorable structure diversity are arising to be one of the most promising adsorbents for water purification. During the adsorption processes, influence factors that determine or affect the usability and performances of MOFs are mainly focused on the stability of MOFs, their affinity for contaminants and the conducting conditions （pH, ini- tial concentration of the contaminants）. In this review, we will systematically present the performances of MOFs （mainly focused on MOF crystals, MOF nanomaterial or MOF composites will be beyond the scope of this review） for contaminants purification （inorganic and organic contaminants） in water and give a detailed discussion about the connection among their performances, conducting condition factors and potential interaction mechanisms （e.g. electrostatic interactions, coordination or p-p interaction）. We hope this review will be beneficial to the design, regeneration and reuse of MOF adsorbents and promote the development of MOFs for water purification.

Zinc oxide nano-enabled microfluidic reactor for water purification and its applicability to volatile organic compounds

This paper reports fast and efficient chemical decontamination of water within a tree-branched centimeter-scale microfluidic reactor.The microreactor integrates Zinc oxide nanowires(ZnO NWs)in situ grown acting as an efficient photocatalytic nanomaterial layer.Direct growth of ZnO NWs within the microfluidic chamber brings this photocatalytic medium at the very close vicinity of the water flow path,hence minimizing the required interaction time to produce efficient purification performance.We demonstrate a degradation efficiency of 95%in o5 s of residence time in one-pass only.According to our estimates,it becomes attainable using microfluidic reactors to produce decontamination of merely 1 l of water per day,typical of the human daily drinking water needs.To conduct our experiments,we have chosen a laboratory-scale case study as a seed for addressing the health concern of water contamination by volatile organic compounds(VOCs),which remain difficult to remove using alternative decontamination techniques,especially those involving water evaporation.The contaminated water sample contains mixture of five pollutants:Benzene;Toluene;Ethylbenzene;m–p Xylenes;and o-Xylene(BTEX)diluted in water at 10 p.p.m.concentration of each.Degradation was analytically monitored in a selective manner until it falls below 1 p.p.m.for each of the five pollutants,corresponding to the maximum contaminant level(MCL)established by the US Environmental Protection Agency(EPA).We also report on a preliminary study,investigating the nature of the chemical by-products after the photocatalytic VOCs degradation process.

Simulation and evaluation of the water purification function of Zhalong Wetland based on a combined water quantity-quality model

The water purification function of natural wetland systems is widely recognized,but rarely studied or scientifically evaluated.Extensive studies have been carried out by various international wetland research communities to quantify the water quality improvement ability of the natural wetlands,in order to maintain such ability and wetland ecological health.This study aims to evaluate the purification function of Zhalong Wetland in China for removing total nitrogen(TN) and phosphorus(TP),based on ex-situ experiments and the development of a combined water quantity-quality model.Experiments and model predictions were carried out with different input TP and TN concentrations.Statistical analyses demonstrated that the relative errors between model simulations and experimental observations for TN and TP were 8.6% and 12.4%,respectively.With water retention time being maintained at 90 d,the removal rate of these pollutants could not reach the required Grade V standards,if the inflow TN concentration was over 42 mg L-1,or the input TP concentration was over 14 mg L-1.The simulation results also demonstrated that,even with Grade V quality standard compliance,when the water inflow from surrounding industries and agriculture lands into Zhalong Wetland reaches 0.3×10 8 m 3 a-1,the maximum TN and TP loads that the reserve can cope with are 1.26×10 3 t a-1 and 0.42×10 3 t a-1,respectively.Overall,this study has produced a significant amount of information that can be used for the protection of water quality and ecological health of Zhalong Wetland.

Research on Ecological Water Cycle and Purification in Rural Landscape——Take Zhangjia Village Ecological Wastewater Treatment Project in Henan Province as an Example

Rural landscape is not only a natural landscape,but also a cultural landscape.The improvement of rural environment in Lushi County is carried out under the background of“Building Beautiful Villages”.Through the plan of environmental improvement,the appearance of villages in rural areas will be significantly improved,and the gap between urban and rural areas will be shortened.This research addresses the problems of scarce water resources,imperfect rainwater collection facilities,and increased environmental pollution in rural areas,and explores a flexible,effective,and integrated landscape ecological water treatment system that integrates with natural ecosystems.The practice has shown that the flexible combination of different technical measures according to local conditions and the construction of ecological water self-circulation and self-purification systems can reduce maintenance costs and achieve sustainable landscape.The virtuous cycle of the revetment’s micro-ecology greatly improves the environmental carrying capacity of the landscape.Reasonable water management system is more flexible in dealing with unexpected problems.The thesis proposes landscape design strategies for water circulation and water purification in rural areas,and applies them to actual design cases.It attempts to introduce a combined treatment system to achieve a more diverse landscape concept and further explore the healthy and sustainable development of rural water environment.

Bioinspired and biomimetic membranes for water purification and chemical separation: A review

Bioinspired and biomimetic membranes that contain biological transport channels or attain their structural designs from biological systems have been through a remarkable development over the last two decades.They take advantage of the exceptional transport properties of those channels,thus possess both high permeability and selectivity,and have emerged as a promising solution to existing membranes.Since the discovery of biological water channel proteins aquaporins(AQPs),extensive efforts have been made to utilize them to make separation membranes–AQP-based membranes,which have been commercialized.The exploration of AQPs’unique structures and transport properties has resulted in the evolution of biomimetic separation materials from protein-based to artificial channelbased membranes.However,large-scale,defect-free biomimetic membranes are not available yet.This paper reviews the state-of-the-art biomimetic membranes and summarizes the latest research progress,platform,and methodology.Then it critically discusses the potential routes of this emerging area toward scalable applications.We conclude that an appropriate combination of bioinspired concepts and molecular engineering with mature polymer industry may lead to scalable polymeric membranes with intrinsic selective channels,which will gain the merit of both desired selectivity and scalability.

Electrochemical reduction of Cr(Ⅵ)in the presence of sodium alginate and its application in water purification

Chromium(Cr)is used in many manufacturing processes,and its release into natural waters is a major environmental problem today.Low concentrations of Cr(Ⅵ)are toxic to human health and living organisms due to the carcinogenic and mutagenic nature of this mineral.This work examined the conversion of Cr(Ⅵ)to Cr(Ⅲ)via electrochemical reduction using gold electrode in an acidic sodium alginate(SA)solution and subsequent removal of the produced Cr(Ⅲ)-SA by the polymer-enhanced ultrafiltration(PEUF)technique.A solution of SA in nitric acid was used both as an electrolytic medium during the voltammetric measurements and bulk electrolysis and as an extracting agent during the PEUF technique.The electroanalysis of Cr(Ⅵ)was performed by linear sweep voltammetry in the presence of acidic SA solution to study its voltammetric behavior as a function of the Cr(Ⅵ)concentration,pH,presence of Cr(Ⅲ),SA concentration and scan rate.In addition,the quantitative reduction of Cr(Ⅵ)to Cr(Ⅲ)was studied through the bulk electrolysis technique.The results showed efficient reduction with well-defined peaks at approximately 0.3 V vs.Ag/AgCl,using a gold working electrode.As the pH increased,the reduction signal strongly decreased until its disappearance.The optimum SA concentration was 10 mmol/L,and it was observed that the presence of Cr(Ⅲ)did not interfere in the Cr(Ⅵ)electroanalysis.Through the quantitative reduction by bulk electrolysis in the presence of acidic SA solution,it was possible to reduce all Cr(Ⅵ)to Cr(Ⅲ)followed by its removal via PEUF.