Integrated design and control technology of liner completion and drilling for horizontal wells

Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.

Research and application of water jet technology in well completion and stimulation in China

In recent years, rapid progress in the use of high pressure water jets （HPWJ） has been made in oil and gas well drilling, completion, and stimulation; and good results have been achieved in field applications. Advances in technologies and developments of well completion and stimulation with hydrajet are reviewed in this paper. Experiments were conducted to study the characteristics of abrasive water jetting and to optimize jet parameters, which can provide methods for the well completion and hydrajet fracturing. Deep-penetrating hydrajet perforating can create a 2-3 m clean hole with a diameter of 20-35 mm. Multilayer hydrajet fracturing is a process whereby multiple layers are stimulated in a single run without using mechanical packers, thereby reducing operation procedure and risk. Multilateral radial wells can be drilled using hydraulic jetting up to 100 m in length. The technique to remove sand particles and plugs with rotating self-resonating cavitating water jets in horizontal wellbores has been developed and oilfield-tested, which shows promising, cost effective prospects.

Novel Water-Based Drilling and Completion Fluid Technology to Improve Wellbore Quality During Drilling and Protect Unconventional Reservoirs

The efficient exploration and development of unconventional oil and gas are critical for increasing the self-sufficiency of oil and gas supplies in China.However,such operations continue to face serious problems(e.g.,borehole collapse,loss,and high friction),and associated formation damage can severely impact well completion rates,increase costs,and reduce efficiencies.Water-based drilling fluids possess certain advantages over oil-based drilling fluids(OBDFs)and may offer lasting solutions to resolve the aforementioned issues.However,a significant breakthrough with this material has not yet been made,and major technical problems continue to hinder the economic and large-scale development of unconventional oil and gas.Here,the international frontier external method,which only improves drilling fluid inhibition and lubricity,is expanded into an internal-external technique that improves the overall wellbore quality during drilling.Bionic technologies are introduced into the chemical material synthesis process to imitate the activity of life.A novel drilling and completion fluid technique was developed to improve wellbore quality during drilling and safeguard formation integrity.Macroscopic and microscopic analyses indicated that in terms of wellbore stability,lubricity,and formation protection,this approach could outperform methods that use typical OBDFs.The proposed method also achieves a classification upgrade from environmentally protective drilling fluid to an ecologically friendly drilling fluid.The developed technology was verified in more than 1000 unconventional oil and gas wells in China,and the results indicate significant alleviation of the formation damage attributed to borehole collapse,loss,and high friction.It has been recognized as an effective core technology for exploiting unconventional oil and gas resources.This study introduces a novel research direction for formation protection technology and demonstrates that observations and learning from the natural world can provide an inexhaustible source of ideas and inspire the creation of original materials,technologies,and theories for petroleum engineering.

Advances in the Fabrication of Perovskite Solar Cells by Roll-to-Roll Technology

In recent years,perovskite solar cells(PSCs)have garnered significant attention as a potential mainstream technology in the future photovol-taic(PV)market.This is primarily attributed to their salient advantages including high efficiency,low cost,and ease of preparation.Nota-bly,the power conversion efficiency(PCE)of PSCs has experienced a remarkable increase from 3.8%in 2009 to over 26%at present.Conse-quently,the adoption of roll-to-roll(R2R)technology for PSCs is considered a crucial step towards their successful commercialization.This arti-de reviews the diverse substrates,scalable deposition techniques(such as solution-based knife-coating and spraying technology),and optimiza.tion procedures employed in recent years to enhance device performance within the R2R process.Additionally,novel perspectives are presented to enrich the existing knowledge in this field.

A new horizon for neuroscience:terahertz biotechnology in brain research

Terahertz biotechnology has been increasingly applied in various biomedical fields and has especially shown great potential for application in brain sciences.In this article,we review the development of terahertz biotechnology and its applications in the field of neuropsychiatry.Available evidence indicates promising prospects for the use of terahertz spectroscopy and terahertz imaging techniques in the diagnosis of amyloid disease,cerebrovascular disease,glioma,psychiatric disease,traumatic brain injury,and myelin deficit.In vitro and animal experiments have also demonstrated the potential therapeutic value of terahertz technology in some neuropsychiatric diseases.Although the precise underlying mechanism of the interactions between terahertz electromagnetic waves and the biosystem is not yet fully understood,the research progress in this field shows great potential for biomedical noninvasive diagnostic and therapeutic applications.However,the biosafety of terahertz radiation requires further exploration regarding its two-sided efficacy in practical applications.This review demonstrates that terahertz biotechnology has the potential to be a promising method in the field of neuropsychiatry based on its unique advantages.

China’s High-Quality Technology Innovation:Scenario Narrative and Measurement System

The world today is undergoing disruptive,transformative shifts driven by a new wave of technological revolutions and industrial changes.In this context,a central question for China’s innovation-driven development strategy is how to effectively identify and measure high-quality technological innovations.Drawing on the stylized facts and scenario narrative of China’s technological landscape,this paper proposes a framework and measurement system for evaluating high-quality technological innovations.While China’s top-level design for technological innovation is guided by policy documents,the increasing number of enterprises applying for“high-tech enterprise”status has coincided with a decline in the quality of patent filings.In response,this paper first underscores the challenges and necessity of measuring the quality of technological innovations.Second,we introduce the high-quality technological innovation indicators and employ them to assess the quality of tech innovations at the firm level,utilizing an approach that combines analogical narrative,gene coding,text analysis,semantic logic,and a database of granted invention patents in China.Third,we examine the systematic and individual biases inherent in citation counts,a commonly used indicator,under specific contexts,and employ a granular instrumental variable approach to validate the effectiveness of the indicators.Finally,we develop a“family tree”of the indicators and explore their application scenarios through a combination of established and extended indicators.Our findings provide a theoretical foundation for evaluating China’s technological innovation quality,inform policy incentives,and offer insights for academia to apply high-quality technological innovation indicators in different contexts.

Significant Advancements in UAV Technology for Reliable Oil and Gas Pipeline Monitoring

Unmanned aerial vehicles(UAVs)technology is rapidly advancing,offering innovative solutions for various industries,including the critical task of oil and gas pipeline surveillance.However,the limited flight time of conventional UAVs presents a significant challenge to comprehensive and continuous monitoring,which is crucial for maintaining the integrity of pipeline infrastructure.This review paper evaluates methods for extending UAV flight endurance,focusing on their potential application in pipeline inspection.Through an extensive literature review,this study identifies the latest advancements in UAV technology,evaluates their effectiveness,and highlights the existing gaps in achieving prolonged flight operations.Advanced techniques,including artificial intelligence(AI),machine learning(ML),and deep learning(DL),are reviewed for their roles in pipeline monitoring.Notably,DL algorithms like You Only Look Once(YOLO)are explored for autonomous flight in UAV-based inspections,real-time defect detection,such as cracks,corrosion,and leaks,enhancing reliability and accuracy.A vital aspect of this research is the proposed deployment of a hybrid drone design combining lighter-than-air(LTA)and heavier-than-air(HTA)principles,achieving a balance of endurance and maneuverability.LTA vehicles utilize buoyancy to reduce energy consumption,thereby extending flight durations.The paper details the methodology for designing LTA vehicles,presenting an analysis of design parameters that align with the requirements for effective pipeline surveillance.The ongoing work is currently at Technology Readiness Level(TRL)4,where key components have been validated in laboratory conditions,with fabrication and flight testing planned for the next phase.Initial design analysis indicates that LTA configurations could offer significant advantages in flight endurance compared to traditional UAV designs.These findings lay the groundwork for future fabrication and testing phases,which will be critical in validating and assessing the proposed approach’s real-world applicability.By outlining the technical complexities and proposing specialized techniques tailored for pipeline monitoring,this paper provides a foundational framework for advancing UAV capabilities in the oil and gas sector.Researchers and industry practitioners can use this roadmap to further develop UAV-enabled surveillance solutions,aiming to improve the reliability,efficiency,and safety of pipeline monitoring.

A new mathematical model for horizontal wells with variable density perforation completion in bottom water reservoirs

Horizontal wells are commonly used in bottom water reservoirs,which can increase contact area between wellbores and reservoirs.There are many completion methods used to control cresting,among which variable density perforation is an effective one.It is difficult to evaluate well productivity and to analyze inflow profiles of horizontal wells with quantities of unevenly distributed perforations,which are characterized by different parameters.In this paper,fluid flow in each wellbore perforation,as well as the reservoir,was analyzed.A comprehensive model,coupling the fluid flow in the reservoir and the wellbore pressure drawdown,was developed based on potential functions and solved using the numerical discrete method.Then,a bottom water cresting model was established on the basis of the piston-like displacement principle.Finally,bottom water cresting parameters and factors influencing inflow profile were analyzed.A more systematic optimization method was proposed by introducing the concept of cumulative free-water production,which could maintain a balance（or then a balance is achieved）between stabilizing oil production and controlling bottom water cresting.Results show that the inflow profile is affected by the perforation distribution.Wells with denser perforation density at the toe end and thinner density at the heel end may obtain low production,but the water breakthrough time is delayed.Taking cumulative free-water production as a parameter to evaluate perforation strategies is advisable in bottom water reservoirs.

A Cementing Technology for Shale Oil Horizontal Wells

Organic rich dark shale of Q Formation can be found in many areas(e.g.,in the North of S Basin).The shale target stratum is easy to hydrate and often undergoes spallation.Therefore,centering the casing in the horizontal section of the irregular borehole is relatively difficult.Similarly,achieving a good cementflushing efficiency under complex borehole conditions is a complex task.Through technologies such as centralizer,efficient preflushing,multi-stageflushing and ductile cement slurry,better performances can be achieved.In this study,it is shown that the cementing rate in the DY2H horizontal section is 97.8%,which is more than 34%higher than that of adjacent wells.This cementing matching technology for sidetracking horizontal wells can be used to improve the cementing quality of continental shale and provides a reference for future applications in thisfield.

Research Progress and Prospect of Well Integrity Technology

Well integrity technology can effectively ensure the safety of the entire life cycle of oil and gas wells. With the exploration and development of more and more high-temperature, high-pressure, high-yield and deep wells, and the constantly increasing requirements for safety and environmental protection in various countries, well integrity technology has become a research hot spot in the oil industry. Based on the analysis of the four basic concepts of well integrity: full life cycle, well integrity management system, well barrier, and risk assessment, this article conducts a comparative analysis of the development history of well integrity technologies at home and abroad, and systematically summarizes foreign wells. The current status of integrity technology, based on the above investigation and analysis, puts forward suggestions for the next development direction of well integrity technology, which has certain guiding significance for the development of the integrity of the next step.

Shale Gas Well Completions and Maximizing Gas Recoveries

It is shown that stress fields within the earth are the principle control for hydraulic fracture direction in horizontal shale gas wells. Hydraulic fracturing is a process of increasing permeability within gas shales and involves a sophisticated organization of technology, good planning and proper management of equipment over a very short time period to be successful. The direction and extent of the induced fractures can be determined in near real-time at the well site via application of earthquake seismology theory in a now common process known as frac mapping. Next to the horizontal lateral azimuth, the total volume of slurry pumped into the well is a major factor in determining well EURs. Vertical fracture growth can be controlled and is important in concentration of the slurry within the main zone target zone that has the high TOC and porosity. Cemented casing with perforations is currently the most used method for zone isolation. New open-hole sleeve packers may eventually provide more flexibility in fracture design while also providing a means for refracturing multi-stage fractured horizontal wells, a technique not now commonly available. Multi-Stage fracture design requires incorporating rock properties with fracturing effect simulations and then verifying results using 3D reservoir simulations. Maximizing the gas recovery factors and EURs can be accomplished through use of closely spaced laterals with inter-fingered fracture stages and exploiting the stress shadow fracturing phenomenon. Even greater EURs may be possible if the wells can be refractured thereby opening up additional permeability channels. Shale gas development has progressed in an environmentally sensitive manner within the U.S. and will continue in this manner. During the past ten years, all of these technologies have been either newly developed or were the advancement of existing technology with modifications. The opportunity exists to take these proven technologies to other areas of the world for exploitation of shale gas reservoirs.

The extending length calculation of hydraulic drive non-metallic completion screen pipe running into ultra-short radius horizontal well

Focusing on the extending length restriction of the completion screen pipe resistance running into ultra-short radius horizontal well,this paper proposed technology of hydraulic drive completion tubular string running into ultra-short radius horizontal well.Innovative hydraulic drive tools and string structure are designed,which are composed of guide tubing,hydraulic drive tubing and non-metallic completion screen pipe from inside to outside.A novel mechanical-hydraulic coupling model is established.Based on the wellbore structure of an ultra-short radius horizontal well for deep coalbed methane,the numerical calculations of force and hydraulic load on tubular strings were accomplished by the mechanical-hydraulic coupling model.The results show that the extending length of completion tubular string with the hydraulic drive is 17 times that of conventional completion technology under the same conditions.The multi-factor orthogonal design is adopted to analyze the numerical calculations,and the results show that the extending length of the completion tubular string is mainly affected by the completion tubular string structure and the friction coefficient between the non-metallic composite continuous screen pipe and the wellbore.Two series of hydraulic drive completion tubular string structures suitable for ultra-short radius horizontal wells under different conditions are optimized,with the extending limits of 381 m and 655 m,respectively.These researches will provide theoretical guidance for design and control of hydraulic drive non-metallic composite continuous completion screen pipe running into ultra-short radius horizontal wells.

Laboratory Evaluation Procedures of Formation Damage Induced by Completion Fluids in Horizontal Wells

ＬａｂｏｒａｔｏｒｙＥｖａｌｕａｔｉｏｎＰｒｏｃｅｄｕｒｅｓｏｆＦｏｒｍａｔｉｏｎＤａｍａｇｅＩｎｄｕｃｅｄｂｙＣｏｍｐｌｅｔｉｏｎＦｌｕｉｄｓｉｎＨｏｒｉｚｏｎｔａｌＷｅｌｌｓ￥ＹａｎＪｉｅｎｉａｎ，ＪｉａｎｇＧｕａｎｃｈｅｎｇａｎｄＷｕＸｕｅｓｈ...

Prospects for green steelmaking technology with low carbon emissions in China

The steel industry is a major source of CO_(2) emissions,and thus,the mitigation of carbon emissions is the most pressing challenge in this sector.In this paper,international environmental governance in the steel industry is reviewed,and the current state of development of low-carbon technologies is discussed.Additionally,low-carbon pathways for the steel industry at the current time are proposed,emphasizing prevention and treatment strategies.Furthermore,the prospects of low-carbon technologies are explored from the perspective of transitioning the energy structure to a“carbon-electricity-hydrogen”relationship.Overall,steel enterprises should adopt hydrogen-rich metallurgical technologies that are compatible with current needs and process flows in the short term,based on the carbon substitution with hydrogen(prevention)and the CCU(CO_(2) capture and utilization)concepts(treatment).Additionally,the capture and utilization of CO_(2) for steelmaking,which can assist in achieving short-term emission reduction targets but is not a long-term solution,is discussed.In conclusion,in the long term,the carbon metallurgical process should be gradually supplanted by a hydrogen-electric synergistic approach,thus transforming the energy structure of existing steelmaking processes and attaining near-zero carbon emission steelmaking technology.

Risk Based Technology Qualification Method for HPHT Well

With the increasing demand for new technologies in HPHT (high pressure high temperature) wells, more and more attention has been paid to the system of technical qualifications. Most established norms, standards and recommended practices are written in prescribed formats, setting out methods, procedures and acceptance criteria for product design, manufacture and testing. However, established norms, standards or recommended practices may not adequately cover new technologies or applications. The technical qualification system is established in this paper, which can identify the potential failure modes and some activities in order to control the uncertainties and increase confidence of using new technology. A risk-based technical qualification system is used to assess non-traditional operations. It includes following seven main steps: system breakdown, technology assessment and classification, technical novelty, failure model and risk analysis, risk-based qualification planning and participation level development. The core of technical qualification system is to understand the ways and causes of system failure, and to carry out corresponding activities to provide evidence that the system will not fail. Through the technical identification process, the detailed equipment/operation specifications and identification requirements have been formulated. Different levels of participation are assigned for each eligibility activity, depending on the hazard and risk. It is proved that the application of the technical qualification principle in the systematic evaluation and control of the risks of new technologies or new applications is successful. In HPHT wells in particular, operators can move from a reactive approach to a proactive approach.

A quantitative study of disruptive technology policy texts:An example of China’s artificial intelligence policy

Purpose:The transformative impact of disruptive technologies on the restructuring of the times has attracted widespread global attention.This study aims to analyze the characteristics and shortcomings of China’s artificial intelligence(AI)disruptive technology policy,and to put forward suggestions for optimizing China’s AI disruptive technology policy.Design/methodology/approach:Develop a three-dimensional analytical framework for“policy tools-policy actors-policy themes”and apply policy tools,social network analysis,and LDA topic model to conduct a comprehensive analysis of the utilization of policy tools,cooperative relationships among policy actors,and the trends in policy theme settings within China’s innovative AI technology policy.Findings:We find that the collaborative relationship among the policy actors of AI disruptive technology in China is insufficiently close.Marginal subjects exhibit low participation in the cooperation network and overly rely on central subjects,forming a“center-periphery”network structure.Policy tool usage is predominantly focused on supply and environmental types,with a severe inadequacy in demand-side policy tool utilization.Policy themes are diverse,encompassing topics such as“Intelligent Services”“Talent Cultivation”“Information Security”and“Technological Innovation”,which will remain focal points.Under the themes of“Intelligent Services”and“Intelligent Governance”,policy tool usage is relatively balanced,with close collaboration among policy entities.However,the theme of“AI Theoretical System”lacks a comprehensive understanding of tool usage and necessitates enhanced cooperation with other policy entities.Research limitations:The data sources and experimental scope are subject to certain limitations,potentially introducing biases and imperfections into the research results,necessitating further validation and refinement.Practical implications:The study introduces a three-dimensional analysis framework for disruptive technology policy texts,which is significant for formulating and enhancing disruptive technology policies.Originality/value:This study utilizes text mining and content analysis techniques to quantitatively analyze disruptive technology policy texts.It systematically evaluates China’s AI policies quantitatively,focusing on policy tools,policy actors,policy themes.The study uncovers the characteristics and deficiencies of current AI policies,offering recommendations for formulating and enhancing disruptive technology policies.

New Achievements in Well Logging Technology

ＮｅｗＡｃｈｉｅｖｅｍｅｎｔｓｉｎＷｅｌｌＬｏｇｇｉｎｇＴｅｃｈｎｏｌｏｇｙＴａｎＴｉｎｇｄｏｎｇ（ＣｈｉｅｆＥｎｇｉｎｅｅｒｏｆＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆｐｅｔｒｏｌｅｕｍＥｘｐｌｏｒａｔｉｏｎａｎｄＤｅｖｅｌｏｐｍｅｎｔ，ＣＮＰＣ）Ｋ...

Research on Wireless Monitoring Technology of the Well Site Environment

Based on the characteristics of wireless communication technology and Wireless Sensor Network, this paper studies the well site environmental monitoring system. The relevant hardware and software of the system are designed to monitor the well site environment, thus preventing downhole accidents. The system uses the wireless ZigBee technology as the transmission mode, and combines the virtual instrument technology to design the upper machine interface. The test results show that the system can monitor the outdoor environment in real time. When the environmental parameters exceed the set value, the corresponding location of the LabVIEW interface will send an alarm.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

Determination of the Cement Sheath Interface and the Causes of Failure in the Completion Stage of Gas Wells

The bonding quality of the cement sheath interface decreases during well completion because of the change in the casing pressure.To explore the root cause of such phenomena,experiments on the mechanical properties and interface bonding strength of a cement sheath have been carried out taking the LS25-1 high-temperature and high-pressure(HTHP)gas field as an example.Moreover,a constitutive model of the cement sheath has been defined and verified both by means of a full-scale HTHP cement sheath sealing integrity evaluation experiment and three-dimensional finite element simulations.The results show that the low initial cementing surface strength is the root cause of cement sheath interface bonding failure.When the pressure in the casing exceeds a certain limit,the stress caused by the change in the internal pressure in the casing is transmitted to the cement sheath,resulting in the degradation of the interface stiffness of the cement sheath.However,with an increase in the casing wall thickness,the stress transmission capacity decreases.Therefore,it is concluded that improving the interfacial cementing strength,appropriately increasing the casing wall thickness and increasing the initial stress of the cement sheath are the keys to ensuring the sealing integrity of the cement sheath in high-temperature and high-pressure gas wells.