Carbon dot-based artificial light-harvesting systems with sequential energy transfer and white light emission for photocatalysis

In this work, we designed and synthesized cationic carbon dots(CDs) with a size distribution of 1.6–3.7 nm, which exhibited dark blue fluorescence in the aqueous solution. Based on its excellent luminescence properties, we used it as an energy donor to construct a sequential artificial light-harvesting system(LHS) by employing the energy-matching dyes eosin Y disodium salt(EY) and sulforhodamine101(SR101), which could regulate the white light emission(Commission Internationale de l'Eclairage(CIE) coordinate:(0.30, 0.31)) with the energy transfer efficiency(ΦET) of 53.9% and 20.0%. Moreover, a single-step artificial LHS with white light emission(0.32, 0.28) can be constructed directly using CDs and dye solvent 43(SR) with ΦETand antenna effect(AE) of 48.8% and 6.5, respectively. More importantly,CDs-based artificial LHSs were firstly used in photocatalytic of α-bromoacetophenone, with a yield of90%. This work not only provides a new strategy for constructing CDs-based LHSs, but also opens up a new application for further applying the energy harvested in CDs-based LHSs to the field of the aqueous solution photocatalysis.

Acid-induced tunable white light emission based on triphenylamine derivatives

A series of triphe nylamine(TPA)derivatives with various substituent groups were prepared and showed different absorption and fluorescence characteristics due to the substituent effect.On account of the existence of pyridine units,these TPA derivatives exhibited acid-induced tunable multicolor fluorescence emission including white light emission.In addition,acid-induced fluorescence regulation of these compounds has been also realized in the solid state,which enable them to be successfully constructed the stimuli-responsive fluorescent films and fluorescent inks for inkjet printing.

White light emission of Eu^(3+)/Ag co-doped Y_2Si_2O_7

The Eu^3＋/Ag co-doped rare earth disilicate Y2Si2O7 microcrystal was synthesized by sol-gel method. Through controlling the thermal treatment process of YzSi2OT：EU3＋/Ag precursor, various phases （amorphous, α, β, γ, δ） were prepared. White light emis- sion was observed under UV light excitation in the samples heavily doped with Ag. The white light was realized by combining the intense red emission of Eu3＋, the green emission attributed to the very small molecule-like, non-plasmonic Ag particles （ML-Ag-particles）, and the blue emission due to Ag ions. Results demonstrated that Eu3＋/Ag co-doped Y2Si207 microcrystal could be potentially applied as white light emission phosphors for UV LED chips.

High-performance CsPbBr_(3)@Cs_(4)PbBr_(6)/SiO_(2) nanocrystals via double coating layers for white light emission and visible light communication

Owing to their outstanding optoelectronic properties,all-inorganic CsPbBr_(3) perovskite nanocrystals(NCs)are regarded as excellent materials for various optoelectronic applications.Unfortunately,their practical applications are limited by poor stability against water,heat,and polar solvents.Here,we propose a facile synthesis strategy for CsPbBr_(3)@Cs_(4)PbBr_(6) NCs via tetraoctylammonium bromide ligand induction at room temperature.The resulting CsPbBr_(3)@Cs_(4)PbBr_(6) NCs show a high photoluminescence quantum yield of 94%.In order to prevent Cs4PbBr6 from being converted back to CsPbBr_(3) NCs when exposed to water,a second coating layer of SiO2 is formed on the surface of the CsPbBr_(3)@Cs_(4)PbBr_(6) NCs by the facile hydrolysis of tetramethoxysilane.The resulting CsPbBr_(3)@Cs_(4)PbBr_(6)/SiO_(2) NCs with their double coating structure have outstanding stability against not only a polar solvent(ethanol)but also water and heat.The as-prepared CsPbBr_(3)@Cs_(4)PbBr_(6)/SiO_(2) NCs serve as green emitters in efficient white light-emitting diodes(WLEDs)with a high color rendering index(CRI)of 91 and a high power efficiency 59.87 lm W−1.Furthermore,the use of these WLEDs in visible light communication(VLC)results in a maximum rate of 44.53 Mbps,suggesting the great potential of the reported methods and materials for solid-state illumination and VLC.

White light emission from AIE-active luminescent organic materials

Fluorescent organic materials that exhibit unique aggregation-induced emission have been utilized for various applications,including white light emission(WLE).The materials typically rely on composite designs involving a mixture of compounds emitting at different wavelengths of light.To overcome the limitations offered by the design of such composite mixtures,tremendous efforts were also emphasized in developing single-molecule substrates that emit white light.The white light by either method is typically controlled by the solvent polarity,energy and charge transfer,host-guest interactions,gelation,or embedding in the polymer or organic frameworks.This article briefly reviews various molecules exhibiting aggregation-induced emission behavior and emitting white light.

Rare Earth Luminescent Materials for White LED Solid State Lighting

Solid-state white LED will be a new generation of energy-saving light source in 21 century. In order to emitting white light, one of important approaches is using luminescence conversion technology with rare earth phosphors, which can be excited by the 460 nm blue light or 400 nm near violet light emitted from the InGaN chip and then emit white light. The rare earths doped phosphors prepared by us such as YAG ： Ce^3＋, Ca1-xSrxS ： Eu^2＋, Ga2S3 ： Eu^2＋, MGa2S4：Eu^2＋ （M = Ca, Sr, Ba）, SrGa2＋xS4＋y ：Eu^2＋,（Ca1 - xSrx ） Se ： Eu^2 ＋ , SrLaGaaS6O ： Eu^2 ＋ , （ M1, M2 ） 10 （PO4）6XE（M1 = Ca, Sr, Ba; Ms = Eu, Mn; X = F, Cl, Br） and NaEu0.92 Sm0.08 （MoO4）5 were reported. They emit blue, green, yellow or red color light. Some white LEDs were made by these phosphors with blue or near violet InGaN chips and their chromaticity coordinate （x, y）, correlated color temperature Tc, and color rendering index Ra are reported.

Luminescent characteristics of Tm^(3+)/Tb^(3+)/Eu^(3+) tri-doped Na_(5)Y_(9)F_(32) single crystals for white emission with high thermal stability

By using an improved Bridgman method,0.3 mol%Tm^(3+)/0.6 mol%Tb^(3+)/y mol%Eu^(3+)(y=0,0.4,0.6,0.8)doped Na_(5)Y_(9)F_(32)single crystals were prepared.The x-ray diffraction,excitation spectra,emission spectra and fluorescence decay curves were used to explore the crystal structure and optical performance of the obtained samples.When excited by 362 nm light,the cool white emission was realized by Na_(5)Y_(9)F_(32)single crystal triply-doped with 0.3 mol%Tm^(3+)/0.6 mol%Tb^(3+)/0.8 mol%Eu^(3+),in which the Commission Internationale de l’Eclairage(CIE)chromaticity coordinate was(0.2995,0.3298)and the correlated color temperature(CCT)was 6586 K.The integrated normalized emission intensity of the tridoped single crystal at 448 K could keep 62%of that at 298 K.The internal quantum yield(QY)was calculated to be~15.16%by integrating spheres.These results suggested that the single crystals tri-doped with Tm^(3+),Tb^(3+)and Eu^(3+)ions have a promising potential application for white light-emitting diodes(w-LEDs).

Blue emitting exciplex for yellow and white organic light‑emitting diodes

White organic light-emitting diodes(WOLEDs)have several desirable features,but their commercialization is hindered by the poor stability of blue light emitters and high production costs due to complicated device structures.Herein,we investigate a standard blue emitting hole transporting material(HTM)N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)benzidine(NPB)and its exciplex emission upon combining with a suitable electron transporting material(ETM),3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole(TAZ).Blue and yellow OLEDs with simple device structures are developed by using a blend layer,NPB:TAZ,as a blue emitter as well as a host for yellow phosphorescent dopant iridium(III)bis(4-phenylthieno[3,2-c]pyridinato-N,C2')acetylacetonate(PO-01).Strategic device design then exploits the ambipolar charge transport properties of tetracene as a spacer layer to connect these blue and yellow emitting units.The tetracene-linked device demonstrates more promising results compared to those using a conventional charge generation layer(CGL).Judicious choice of the spacer prevents exciton difusion from the blue emitter unit,yet facilitates charge carrier transport to the yellow emitter unit to enable additional exciplex formation.This complementary behavior of the spacer improves the blue emission properties concomitantly yielding reasonable yellow emission.The overall white light emission properties are enhanced,achieving CIE coordinates(0.36,0.39)and color temperature(4643 K)similar to daylight.Employing intermolecular exciplex emission in OLEDs simplifes the device architecture via its dual functionality as a host and as an emitter.

White light luminescence in Dy/Tm co-doped yttria stabilized zirconia single crystals

A series of high quality Dy_(2)O_(3) and Tm_(2)O_(3)co-doped yttria stabilized zirconia(YSZ) single crystals was synthesized.These crystals have a single cubic structure,and exhibit the characteristic of Dy^(3+)(blue and yellow emissions) and Tm^(3+)(blue emission) under excitation with NUV light.Impo rtantly,the hue can be varied between blue and white by modifying the Tm^(3+)/Dy^(3+)ratio.The photoluminescence and decay curves are consistent with the existence of resonance-type energy transfer from Tm^(3+)to Dy^(3+)ions via an electric multipole interaction mechanism.Maximum luminescence intensity is observed in YSZ doped with 0.50 mol% Tm_(2)O_(3) and 0.75 mol% Dy_(2)O_(3),and this sample has CIE coordinates(x = 0.33,y = 0.33) in accordance with those for white chromaticity.Thus,the outstanding luminescence properties of these single crystals suggest potential applications in white light emission devices.

Photoluminescence properties of Tm^(3+)/Tb^(3+)/Sm^(3+) tri-doped Na_(5)Y_(9)F_(32) single crystal with high thermal stability for white light-emitting diodes

A novel Tm^(3+)/Tb^(3+)/Sm^(3+)tri-doped Na_(5)Y_(9)F_(32)single crystal was synthesized by a modified Bridgman method for the propose of white light emitting diodes.The fluorescence spectra of various Sm^(3+)ion concentrations and fixed 0.4 mol%Tm^(3+)and 0.5 mol%Tb^(3+)were measured and studied systematically excited by near-ultraviolet light of 355 nm.The Sm3+ion concentration takes apparent effect on the relative intensity of peaks in the visible region and the color coordinate combining from these emission bands.A near pure white light emission with color coordinates(0.3295,0.3057)and color temperature(5657 K)can be obtained when the concentrations of Tm^(3+),Tb^(3+)and Sm^(3+)ions are 0.4 mol%,0.5 mol%and 0.8 mol%,respectively.Furthermore,the practical down-conversion internal quantum yield was measured by integrating spheres at about 14.39%.The tri-doped Na_(5)Y_(9)F_(32)single crystal shows a high thermal stability inferring from the temperature dependent emission in which the integrated emission intensities are reduced only by^3%with the increase of temperature from 280 to 450 K.The present results demonstrate that the Tm^(3+)/Tb^(3+)/Sm^(3+)tri-doped Na_(5)Y_(9)F_(32)single crystal may provide a promising candidate for white light-emitting diodes,luminescent materials and fluorescent display devices.

Growth and Optical Spectra of Tb^(3+)/Eu^(3+) Co-doped Cubic NaYF_4 Single Crystal for White Light Emitting Diode

High quality Tb^3＋/Eu^3＋ co-doped cubic NaYF 4 single crystal in the size of Φ1.0 cm×6.6 cm was grown by a modified Bridgman method using KF as assistant flux for NaF-YF 3 system under the condition of completely closed Pt crucible.A white light emission from the combination of the violet-blue,blue,green,orange,and red lights with chromaticity coordinates of x = 0.3107,y = 0.3274,correlated color temperature of T c = 6637 K,color rendering index of R a = 83,and color quality scale of Q a = 82 could be obtained from 1.51 mol%Tb^3＋ and 1.42 mol%Eu^3＋ co-doped cubic NaYF 4 single crystal when being excited by a 369 nm light.This indicates that Tb^3＋/Eu^3＋）co-doped cubic NaYF 4 single crystal has a potential application in white light emitting diode excited by ultraviolet light.

Tunable light emission from carbon dots by controlling surface defects

Carbon dots(CDs)are metal-free fluorescent materials that can be used in optical and electronic devices,but few studies have focused on one-step synthesis routes for CDs with tunable color and high photoluminescence quantum yield(PLQY).Herein,CDs with tunable light emission were synthesized using a novel amide-assisted solvothermal approach.The as-prepared CDs were well dispersed and homogeneous,with average diameters of approximately 2.0–4.0 nm,depending on the dopants.Owing to the surface states with different ratios of nitrogen-and oxygen-related species,different CDs can exhibit blue,green,red,or white emission with relatively high PLQYs of 61.6%,41.3%,29.1%and 19.7%,respectively.XPS measurements,in conjunction with DFT calculations,indicate that nitrogen substitution(pyridinic/pyrrolic nitrogen)dominates the blue emission,while introducing oxygen functional groups lowered the LUMO energy level,which resulted in redder emission.In addition,the CDs are demonstrated as a bioimaging probe in both in vitro and in vivo assays,and the white light CDs have been demonstrated to be potential fluorescent materials for white-light-emitting diode(WLED).

White light photoluminescence from ZnS films on porous Si substrates

ZnS films were deposited on porous Si （PS） substrates using a pulsed laser deposition （PLD） technique. White light emission is observed in photoluminescence （PL） spectra, and the white light is the combination of blue and green emission from ZnS and red emission from PS. The white PL spectra are broad, intense in a visible band ranging from 450 to 700 nrn. The effects of the excitation wavelength, growth temperature of ZnS films, PS porosity and annealing temperature on the PL spectra of ZnS/PS were also investigated.

基于冷却工程对环保型ZnSeTe基量子点的激发态调控

由于材料内部存在高效的非辐射复合,这使得实现高质量的环保量子点仍然具有挑战性.本文中,我们探索了通过冷却工程调节激发态对实现高质量的ZnSeTe核壳量子点的影响.研究发现,超快热载流子俘获和带边载流子俘获是ZnSeTe量子点发射效率低下的主要原因.我们通过设计冷却工程抑制上述过程,并且结合电子和光谱表征分析了其潜在机制.经过冷却优化的ZnSeTe量子点表现出高量子发光效率(>90%)和稳定性,这可与经典的CdSe量子点相媲美.基于这种量子点的白光发光二极管(WLED)表现出优异的光学性能,包括高显色指数(80)和良好的相关色温(7391 K).此外,高性能的WLED还可以用作环保可见光通信.这些结果表明了环保量子点在实际应用中的可行性.