The mechanical properties of fibers were notably improved by incorporating 2,2＇-bis（trifluoromethyl）benzidine（TFMB） into 3,3＇,4,4＇-biphenyltetracarboxylic dianhydride（s-BPDA） and p-phenylenediamine（PPD） bac...The mechanical properties of fibers were notably improved by incorporating 2,2＇-bis（trifluoromethyl）benzidine（TFMB） into 3,3＇,4,4＇-biphenyltetracarboxylic dianhydride（s-BPDA） and p-phenylenediamine（PPD） backbone.The best strength and modulus of BPDA/PPD/TFMB polyimide（PI） fiber（diamine molar ratio of PPD/TFMB= 90/10） were 1.60 and 90 GPa,respectively,which was over two times that of BPDA/PPD PI fiber.SEM image showed that the cross-section of fibers at each stage was round and voids free.Besides,the ＂skin-core＂ and microfibrillar structure were not observed.The thermal properties of PI fibers were also investigated.The results showed that the fibers owned excellent thermal stability,moreover,the structural homogeneity of fibers were significantly improved by heat-drawn stage.The T g values were found to be around 300 °C by dynamic mechanical analysis（DMA）.Wide angle X-ray diffraction（WAXD） and small angle X-ray scattering（SAXS） experiments indicated that the order degree of longitudinal and lateral stacks,the molecular orientation and the structural homogeneity of fibers were improved in the preparation process of fibers.展开更多
Acetanilide, adipic acid and potassium hydrogen phthalate were chosen as nucleating agents of polyvinyl chloride（PVC）, and their effects on PVC crystallization were studied by differential scanning calorimetry, wide...Acetanilide, adipic acid and potassium hydrogen phthalate were chosen as nucleating agents of polyvinyl chloride（PVC）, and their effects on PVC crystallization were studied by differential scanning calorimetry, wide angle X-ray diffraction and fourier transform infrared spectroscopy. The experimental results indicate that all of the three additives are compatible with PVC to some extent, but adipic acid＇s compatibility with PVC is less satisfactory. The three additives can improve PVC crystallinity, and acetanilide can decrease PVC glass transition temperature（T）and narrow PVC melting range, while adipic acid and potassium hydrogen phthalate rise T of PVC and widen its melting range. All additives do not affect PVC crystal system and all g samples are in orthorhombic system. All additives can improve （200）, （110）, （210） and （201, 111） planes growing. Moreover, acetanilide and adipic acid can shrink PVC spacings and improve the crystal perfection of PVC, but potassium hydrogen phthalate swells spacings and reduces the perfection of PVC crystal.展开更多
Polypropylene copolymers (CPP) containing β-nucleating agent were investigated by differential scanningcalorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarizing light microscopy (PLM). The results show th...Polypropylene copolymers (CPP) containing β-nucleating agent were investigated by differential scanningcalorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarizing light microscopy (PLM). The results show thathigh content of β-phase crystals can also be formed for CPPs. Like PP homopolymers, the CPPs also have a most favorabletemperature near 132℃ for β-phase crystal growth. The crystallization rate of CPPs containing β-nucleating agent (β-CPP) ismuch greater than that of PP homopolymer containing β-nucleating agent (β-PP homopolymer). The observation ofspherulite morphology of β-CPP and β-PP homopolymer shows that the spherulites of β-CPP are more imperfect than thoseof β-PP homopolymer.展开更多
BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible...BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain packing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. RESULTS: Optical microscopy study reveals that more than 50% of isosorbide content with phenyl hydroquinone and terephthalic acid showed “yellow iridescent oily streaks” with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stability of all copolyesters was more than 300?C on the basis of 10% wt loss. CONCLUSIONS: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300?C. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP.展开更多
Micro-sized copper powder(99.95%;O≤0.3)has been shock-processed with explosives of high detonation velocities of the order of 7.5 km/s to observe the structural and microstructural sub-strengthening.Axisymmetric shoc...Micro-sized copper powder(99.95%;O≤0.3)has been shock-processed with explosives of high detonation velocities of the order of 7.5 km/s to observe the structural and microstructural sub-strengthening.Axisymmetric shock-consolidation technique has been used to obtain conglomerates of granular Cu.The technique involves the cylindrical compaction system wherein the explosive-charge is in direct proximity with the powder whereas the other uses indirect shock pressure with die-plunger geometry.Numeric simulations have been performed on with Eulerian code dynamics.The simulated results show a good agreement with the experimental observation of detonation parameters like detonation velocity,pressure,particle velocity and shock pressure in the reactive media.A pin contactor method has been utilized to calculate the detonation pressure experimentally.Wide angled x-ray diffraction studies reveal that the crystalline structure(FCC)of the shocked specimen matches with the un-shocked specimen.Field emissive scanning electron microscopic examination of the compacted specimens show a good sub-structural strengthening and complement the theoretical considerations.Laser diffraction based particle size analyzer also points towards the reduced particle size of the shock-processed specimen under high detonation velocities.Micro-hardness tests conducted under variable loads of 0.1 kg,0.05 kg and 0.025 kg force with diamond indenter optical micrographs indicate a high order of micro-hardness of the order of 159 Hv.Nitrogen pycnometry used for the density measurement of the compacts shows that a compacted density of the order of 99.3%theoretical mean density has been achieved.展开更多
基金Supported by the Science & Technology Development Program of Jilin Province,China(No.20100537)
文摘The mechanical properties of fibers were notably improved by incorporating 2,2＇-bis（trifluoromethyl）benzidine（TFMB） into 3,3＇,4,4＇-biphenyltetracarboxylic dianhydride（s-BPDA） and p-phenylenediamine（PPD） backbone.The best strength and modulus of BPDA/PPD/TFMB polyimide（PI） fiber（diamine molar ratio of PPD/TFMB= 90/10） were 1.60 and 90 GPa,respectively,which was over two times that of BPDA/PPD PI fiber.SEM image showed that the cross-section of fibers at each stage was round and voids free.Besides,the ＂skin-core＂ and microfibrillar structure were not observed.The thermal properties of PI fibers were also investigated.The results showed that the fibers owned excellent thermal stability,moreover,the structural homogeneity of fibers were significantly improved by heat-drawn stage.The T g values were found to be around 300 °C by dynamic mechanical analysis（DMA）.Wide angle X-ray diffraction（WAXD） and small angle X-ray scattering（SAXS） experiments indicated that the order degree of longitudinal and lateral stacks,the molecular orientation and the structural homogeneity of fibers were improved in the preparation process of fibers.
基金Scientific and Technological Project of Hubei Province(No.2002AA105A01)
文摘Acetanilide, adipic acid and potassium hydrogen phthalate were chosen as nucleating agents of polyvinyl chloride（PVC）, and their effects on PVC crystallization were studied by differential scanning calorimetry, wide angle X-ray diffraction and fourier transform infrared spectroscopy. The experimental results indicate that all of the three additives are compatible with PVC to some extent, but adipic acid＇s compatibility with PVC is less satisfactory. The three additives can improve PVC crystallinity, and acetanilide can decrease PVC glass transition temperature（T）and narrow PVC melting range, while adipic acid and potassium hydrogen phthalate rise T of PVC and widen its melting range. All additives do not affect PVC crystal system and all g samples are in orthorhombic system. All additives can improve （200）, （110）, （210） and （201, 111） planes growing. Moreover, acetanilide and adipic acid can shrink PVC spacings and improve the crystal perfection of PVC, but potassium hydrogen phthalate swells spacings and reduces the perfection of PVC crystal.
文摘Polypropylene copolymers (CPP) containing β-nucleating agent were investigated by differential scanningcalorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarizing light microscopy (PLM). The results show thathigh content of β-phase crystals can also be formed for CPPs. Like PP homopolymers, the CPPs also have a most favorabletemperature near 132℃ for β-phase crystal growth. The crystallization rate of CPPs containing β-nucleating agent (β-CPP) ismuch greater than that of PP homopolymer containing β-nucleating agent (β-PP homopolymer). The observation ofspherulite morphology of β-CPP and β-PP homopolymer shows that the spherulites of β-CPP are more imperfect than thoseof β-PP homopolymer.
文摘BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain packing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. RESULTS: Optical microscopy study reveals that more than 50% of isosorbide content with phenyl hydroquinone and terephthalic acid showed “yellow iridescent oily streaks” with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stability of all copolyesters was more than 300?C on the basis of 10% wt loss. CONCLUSIONS: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300?C. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP.
基金Defence Research and Development Organization(DRDO),India,for Grant-in-aid Project No.ERIP/ER/0703665/M/01/1044the University Grants Commission(UGC-New Delhi),India,for providing Research Fellowship No.F.4-1/2006(BSR)/11-08/2008.
文摘Micro-sized copper powder(99.95%;O≤0.3)has been shock-processed with explosives of high detonation velocities of the order of 7.5 km/s to observe the structural and microstructural sub-strengthening.Axisymmetric shock-consolidation technique has been used to obtain conglomerates of granular Cu.The technique involves the cylindrical compaction system wherein the explosive-charge is in direct proximity with the powder whereas the other uses indirect shock pressure with die-plunger geometry.Numeric simulations have been performed on with Eulerian code dynamics.The simulated results show a good agreement with the experimental observation of detonation parameters like detonation velocity,pressure,particle velocity and shock pressure in the reactive media.A pin contactor method has been utilized to calculate the detonation pressure experimentally.Wide angled x-ray diffraction studies reveal that the crystalline structure(FCC)of the shocked specimen matches with the un-shocked specimen.Field emissive scanning electron microscopic examination of the compacted specimens show a good sub-structural strengthening and complement the theoretical considerations.Laser diffraction based particle size analyzer also points towards the reduced particle size of the shock-processed specimen under high detonation velocities.Micro-hardness tests conducted under variable loads of 0.1 kg,0.05 kg and 0.025 kg force with diamond indenter optical micrographs indicate a high order of micro-hardness of the order of 159 Hv.Nitrogen pycnometry used for the density measurement of the compacts shows that a compacted density of the order of 99.3%theoretical mean density has been achieved.
