A Tangential Wind Profile for Simulating Strong Tropical Cyclones with MM5

A new tangential wind profile for simulating strong tropical cyclones is put forward and planted into the NCAR- AFWA tropical cyclone bogussing scheme in MM5. The scheme for the new profile can make full use of the information from routine typhoon reports, including not only the maximum wind, but also the additional information of the wind speeds of 25.7 and 15.4 ms-1 and their corresponding radii, which are usually provided for strong cyclones. Thus, the new profile can be used to describe the outer structure of cyclones more accurately than by using the earlier scheme of MM5 in which on- ly the maximum wind speed is considered. Numerical experimental forecasts of two strong tropical cyclones are performed to examine the new profile. Results show that by using the new profile the prediction of both cyclones’ intensity can be obvi- ously improved, but the effects on the track prediction of the two cyclones are different. It seems that the new profile might be more suitable for strong cyclones with shifted tracks. However, the conclusion is drawn from only two typhoon cases, so more cases are needed to evaluate the new profile.

The research on boundary layer evolution characteristics of Typhoon Usagi based on observations by wind profilers

Vertically exploring the characteristics of the typhoon boundary layer（TBL） plays an important role in recognizing typhoon structure. The boundary layer radial direction and tangential wind characteristics of Typhoon Usagi based on the observational data of three boundary layer wind profiler stations along the route of Typhoon Usagi（No. 1319） and by combining with sounding data. The results show that：（1） maximum tangential wind appears in the vicinity of the eye area of Usagi, and it basically maintains a height of around 1 800 m when Usagi keeps a strong typhoon level, with the rapidly decreasing strength of Usagi after it lands, the speed of the maximum tangential wind and its vertical range both decrease;（2） the height of the maximum tangential wind is close to that of the inflow layer top of the typhoon, and is greater than that of the boundary layer estimated on the basis of Richardson number or potential temperature gradient, while the height of mixed layer judged on the basis of the signal-to-noise ratio（SNR） or its gradient is usually low;（3） the the boundary layer height can reach higher than2 100 m before Usagi lands. When the typhoon level or above is achieved, the boundary layer height observed by various stations does not change much, basically staying at between 1 200 and 1 600 m. With the decreasing strength of Usagi after its landfall, the boundary layer height rapidly drops.

Wind profiles in and over trees

One of the most important and frequently studied variable in forests and the most basic element in governing transport processes of airflow is wind speed. The study of wind profile, defined as the change of wind velocity with height, and wind ve-locity are important because of tree physiological and developmental responses. Generally, wind profiles above the ground or at a canopy surface follow classical logarithm law, but wind profiles in a single tree and in a forest stand are not logarithmic. This paper summarizes the results of wind profile studies within a single tree, in a forest stand, above the forest canopy and in a forest area from recent research in a coastal pine forest. The results demonstrate that: 1) wind profiles with in a single conifer tree crown showed an exponential function with height, 2) wind profiles in forest stands were able to be expressed by attenuation coefficient of wind, 3) wind profiles over a forest canopy could be determined using profile parameters (friction velocity, rough-ness length and displacement), and 4) for a forest area, the extreme wind speed could be predicted reasonably using the methods developed for the design of buildings. More research will be required to demonstrate: 1) relationships between wind profiles and tree or stand characteristics, 2) the simple methods for predicting wind profile parameters, and 3) the applications of wind profile in studies of tree physiology, forest ecology and management, and the detail ecological effects of wind on tree growth.

PLANETARY BOUNDARY LAYER HEIGHT MEASURED BY A WIND PROFILER BASED ON THE WAVELET TRANSFORM

Planetary boundary layer height(PBLH) is an important input parameter for any boundary layer study or model, either climate or atmospheric. The variation of the PBLH is also of great significance to the physical processes of numerical prediction, diagnosis of weather forecasting and monitoring urban pollutants. However, effective ways to monitor the PBLH continuously are lack. Wind profilers are commonly used in monitoring PBLH continuously because of its high temporal and spatial resolution, coupled with capability of continuous detection. In this paper, the covariance wavelet transform(CWT) is used to analyze the range-corrected signal-to-noise ratio(SNR) of the wind profiler to determine the PBLH, which is then compared with the results measured by the gradient method and the radiosonde. The conclusions are as follows:(1) The scaling parameter a and translation parameter b of the wavelet are critical in determination of the PBLH by applying the CWT as different values may get completely different results, which requires to select appropriate values in the calculation carefully.(2) Quality control is crucial in determining the PBLH because good quality control can help remove mutation points, which makes the determined PBLH more consistent with the actual situation.(3) In clear-air, the gradient method is not applicable if the boundary layer turbulence is inhomogeneous and the impact of noise is large for that it is easy to be impacted by the mutation of SNR caused by the atmosphere turbulence instability and other factors, which will cause large errors, while the CWT method as an improvement of the gradient method can determine the PBLH quite well.(4) Through quality control, the PBLHs determined by the CWT are consistent with those of radiosonde, and the correlation coefficient between them is 0.87.

Turbulence and Rainfall Microphysical Parameters Retrieval and Their Relationship Analysis Based on Wind Profiler Radar Data

Rainfall is triggered and mainly dominated by atmospheric thermo-dynamics and rich water vapor.Nonetheless, turbulence is also considered as an important factor influencing the evolution of rainfall microphysical parameters. To study such an influence, the present study utilized boundary layer wind profiler radar measurements. The separation point of the radar power spectral density data was carefully selected to classify rainfall and turbulence signals;the turbulent dissipation rate ε and rainfall microphysical parameters can be retrieved to analyze the relationship betweenε and microphysical parameters. According to the retrievals of two rainfall periods in Beijing 2016, it was observed that(1) ε in the precipitation area ranged from 10^(-3.5) to 10^(-1) m^(2) s^(-3) and was positively correlated with the falling velocity spectrum width;(2) interactions between turbulence and raindrops showed that small raindrops got enlarge through collision and coalescence in weak turbulence, but large raindrops broke up into small drops under strong turbulence, and the separation value of ε being weak or strong varied with rainfall attributes;(3) the variation of rainfall microphysical parameters(characteristic diameters, number concentration, rainfall intensity, and water content) in the middle stage were stronger than those in the early and the later stages of rainfall event;(4) unlike the obvious impacts on raindrop size and number concentration, turbulence impacts on rain rate and LWC were not significant because turbulence did not cause too much water vapor and heat exchange.

Roll Vortices in the Boundary Layer Caused by a Concave Wind Profile: A Theoretical Study

The present study solves a two-layer atmospheric wave equation model with a lower atmosphere concave wind profile and cold-air outbreak over sea, while simultaneously proving that such a wind shear may cause neutral boundary layer roll vortices in the presence of disturbing sources upstream. Without thermal effects, the wind shear-induced waves have band structures at the top of the boundary layer that are similar to cloud street patterns observed over sea. This study proves that dynamic and thermal effects can act independently to initiate the roll vortices in the lower atmosphere. At the same time, a quantitative comparison shows that dynamic effects play a large role in the formation of roll vortices in the initial stage of cold-air outbreak and will be surpassed by thermal effects soon after surface heating commences.

THE ANALYSIS OF THE RELATIONSHIP BETWEEN PULSE OF LLJ AND HEAVY RAIN USING WIND PROFILER DATA

Detailed analysis and comparisons are made on the data of Hong Kong wind-profiler and the weather/precipitation every hour during the HUAMEX and the experiment for the monsoon of the South China Sea (SCSMEX) in 1998. It is found that the wind-profiler data could reveal the meso-scale phenomena in the PBL of Southwest Monsoon, which was closely related to rainstorms. The center of the low-level jet under the altitude of 2 km, which corresponded to the appearance of heavy rain, appeared 1 to 2 hours after the center of low-level jet (LLJ) did above the 2-km altitude. An index I is designed to represent the intensity and height of the LLJ. This index can express clearly the close relationship between the precipitation and the LLJ. The results show that the wind-profiler is somewhat predictive to a rainstorm.

Intermittent Clutter Removal Approach for Wind Profiler Data Based on Fractional Fourier Transform

Through the analysis of the target characteristics and according to the intermittent clutter bursting and short duration characteristics,a new method for the clutter recognition based on the fractional Fourier transform（FRFT）is proposed.This method is predicated on the fact that the FRFT perfectly localizes a chirp signal as an impulse when the angle parameter of the transform matches the chirp rate of the chirp signal.The method involves detecting the presence of the intermittent clutter and correctly estimating its orientation in the time-frequency plane,removing the intermittent clutter in the fractional domain,and completing wind estimation by the power spectrum.By testing the artificial WPR-like signal and data measured from the field,we verify that the FRFT-based method is very effective.

Comparative Analysis on Physical Quantity Diagnosis and Wind Profile Radar Data of Two Heavy Rainfalls

[ Objective] The research aimed to contrast physical quantity diagnosis and wind profile radar data of two heavy rainfalls. [ Method ] From circulation background, physical quantity field and wind profile radar data, we analyzed two big rainstorm weather processes （8 -9 July and August 10） in Lianyungang City in 2012. [ Result] Rainstorm generation was related to favorable large-scale circulation situation. The first-stage precipitation during 8 -9 July was warm-zone precipitation, and the precipitation at the second stage was triggered by shear line. Precipitation on August 10 was generated by typhoon low-pressure inverted trough and cold air. Sufficient water vapor content and strong water vapor transportation were favorable for generation of the heavy precipitation. Suction effect by divergence at high layer and convergence at middle and low layers was favorable for maintenance of the strong ascending motion. Occurrence of the heavy precipitation must have ascending motion condition. But it was not that the stronger the ascending motion, the stronger the rainfall intensity. Kindex and θse500 -θse 850 were closely related to rainstorm occurrence. Horizontal wind data of the wind profile radar provided fine structure of the atmospheric horizontal motion at vertical direction, could clearly display vertical structure of the wind field in rainstorm process, and directly reflected change characteristics of the wind field in precipitation process. [ Conclusion] The research could provide reference for future forecast work.

Construction of Vertical Wind Profile from Satellite-Derived Winds for Objective Analysis of Wind Field

During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations. The purpose of these additional systems was to make the best possible data for the studies on various aspects of monsoon circulation. The present study is aimed at the construction of vertical wind profile using cloud motion vectors obtained from GOES (I-O) satellite and to examine whether the constructed wind profiles improves the representation of the monsoon system, flow pattern etc. in the objective analysis. For this purpose, climatological normals of the wind field are considered as the initial guess and the objective analyses of the wind field are made with, first using only data from conventional observations over land areas, subsequently including the constructed winds from cloud motion vectors. These analyses are then compared with the standard analyses of wind field obtained from Quick Look Atlas by T. N. Krishnamurti et al. (1979).It is inferred that satellite estimated mean wind profiles show good agreement with the mean wind profiles of the research ships with RMS errors less than 5 mps below 500 hPa and less than 8 mps above 500 hPa. It is further inferred that the inclusion of constructed winds shows a positive impact on the objective analysis and improvement is seen to be more marked in the data-sparse region of the Arabian sea. Analyses which include the constructed winds show better agreement with the standard analysis, than the analyses obtained using only conventional winds. Thus, results of our study suggest that the wind profiles constructed using cloud motion vectors are of potential use in objective analysis to depict the major circulation features over the Indian region.

Secondary Product Inversion of Wind Profile Data and Its Application in Weather Forecast

Using wind field data of boundary-layer wind profile of Changsha national comprehensive meteorological observation test base,the inversion of atmospheric temperature advection was studied.Moreover,four typical heavy precipitation processes in Changsha region during 2018-2019 were analyzed in detail,and low-level jet index product was calculated.The results showed that the retrieved temperature advection can well reflect the change details of atmospheric temperature advection,and there was a good corresponding relationship between change of the cold and warm advection and the heavy precipitation process;low-level jet index generally had an explosion and enhancement process before precipitation,but the time was not consistent with prior research result,and a large number of samples need to be further studied.

Application of wind profiler data to rainfall analyses in Tazhong Oilfield region,Xinjiang,China

To improve the level of meteorological service for the Oilfield region in the Taklimakan Desert, the Urumqi Institute of Desert Meteorology of the China Meteorological Administration （CMA） conducted a detection experiment by means of wind profiling radar （WPR） in Tazhong Oilfield region of Xinjiang, China in July 2010. By using the wind profiler data obtained during the rainfall process on 27 July, this paper analyzed the wind field fea- tures and some related scientific issues of this weather event. The results indicated that： （1） wind profiler data had high temporal resolution and vertical spatial resolution, and could be used to analyze detailed vertical structures of rainfall processes and the characteristics of meso-scale systems. Before and after the rain event on 27 July, the wind field showed multi-layer vertical structures, having an obvious meso-scale wind shear line and three airflows from different directions, speeding up the motion of updraft convergence in the lower atmosphere. Besides, the wind directions before and after the rainfall changed inversely with increasing height. Before the rain, the winds blew clockwise, but after the onset of the rain, the wind directions became counterclockwise mainly; （2） the temperature advection derived from wind profiler data can reproduce the characteristics of low-level thermodynamic evolution in the process of rainfall, which is capable to reflect the variation trend of hydrostatic stability in the atmosphere. In the early stage of the precipitation on 27 July, the lower atmosphere was mainly affected by warm advection which had accumulated unstable energy for the rainfall event and was beneficial for the occurrence of updraft motion and precipitation; （3） the ＂large-value zone＂ of the radar reflectivity factor Z was virtually consistent with the onset and end of the rainfall, the height for the formation of rain cloud particles, and precipitation intensity. The reflectivity factor Z during this event varied approximately in the range of 18-38 dBZ and the rain droplets formed mainly at the layer of 3,800-4,500 m.

A Model of the Sea-Land Transition of the Mean Wind Profile in the Tropical Cyclone Boundary Layer Considering Climate Changes

The tropical cyclone boundary layer(TCBL)connecting the underlying terrain and the upper atmosphere plays a crucial role in the overall dynamics of a tropical cyclone system.When tropical cyclones approach the coastline,the wind field inside the TCBL makes a sea-land transition to impact both onshore and offshore structures.So better understanding of the wind field inside the TCBL in the sea-land transition zone is of great importance.To this end,a semiempirical model that integrates the sea-land transition model from the Engineering Sciences Data Unit(ESDU),Huang's refined TCBL wind field model,and the climate change scenarios from the Coupled Model Intercomparison Project Phase 6(CMIP6)is used to investigate the influence of climate changes on the sea-land transition of the TCBL wind flow in Hong Kong.More specifically,such a semiempirical method is employed in a series of Monte-Carlo simulations to predict the wind profiles inside the TCBL across the coastline of Hong Kong under the impact of future climate changes.The wind profiles calculated based on the Monte-Carlo simulation results reveal that,under the influences of the most severe climate change scenario,slightly higher and significantly lower wind speeds are found at altitudes above and below 400 m,respectively,compared to the wind speeds recommended in the Hong Kong Wind Code of Practice.Such findings imply that the wind profile model currently adopted by the Hong Kong authorities in assessing the safety of low-to high-rise buildings may be unnecessarily over-conservative under the influence of climate change.On the other hand,the coded wind loads on super-tall buildings slightly underestimate the typhoon impacts under the severe climate change conditions anticipated for coastal southern China.

The Variation Characteristics of Wind Speed Profile and PM_(10) during Typical Sand Weather in Inner Mongolia,China

Based on the data of the wind speed from 20 m meteorological tower and PM10 mass concentration in Zhurihe region from January of 2005 to April of 2006,the evolution characteristics of wind speed profile in near surface layer and PM10 in three representative dust weather processes (dust storm,blowing sand and floating dust) were analyzed.The results showed that wind speed was higher during dust storm and blowing sand with remarkable vertical gradient.The speed in floating dust was relatively lower and increased during the whole process.In general,wind speed after dust weather was smaller with respect to that before the event.The average mass concentrations of PM10 in the processes of dust storm,blowing sand and floating dust were in the ranges of 5 436.38-10 000,1 799.49-4 006.06 and 1 765.53 μg/m3,respectively.

Statistics for Size and Radial Wind Profile of Tropical Cyclones in the Western North Pacific

The 6-yr best-track data of tropical cyclones （TCs） in the western North Pacific are used to study the statistical features of TC size and radial wind profile. A TC size is defined as the azimuthal mean radius of 34-kt surface wind. On average, the TCs in the western North Pacific have a size of 203 km, and the size is larger for stronger TCs. Further analyses show that larger TCs tend to move faster than smaller ones, with a 23–24 km difference in size corresponding to a difference of about 10 km h -1 in moving speed. The TCs that recurve from westward to eastward moving have a mean size of 218 km, significantly larger than that of those without a turning point （179 km）. Regional TC distributions demonstrate that the TCs affecting the Korean Peninsula and southwestern Japan have the largest mean size （250–280 km）. There are also some large TCs affecting southern Philippines, while TCs over the South China Sea are generally small in size. Comparison of intensity and size of all TCs during their lifespan demonstrates that a TC tends to reach its maximum size 6 h after it reaches its maximum intensity, and the decrease rate of size during the weakening stage of a TC is much smaller than the increase rate of size during its developing stage. Thus, linear regression relations between TC size and intensity are established for its developing and weakening stages respectively, which can be used as a forecast tool for TC size. Features of TC radial wind profile are studied by analyzing a parametric wind model based on the radius data of 34-, 50-, and 64-kt surface winds. The results show that the shape parameter d most frequently takes the values of 0.3, 0.4, and 0.5. It generally increases （decreases） as the TC develops （weakens）, implying a sharper （flatter） radial wind profile. Changes in d leads the tendency of intensity. The two parameters for the asymmetric model, namely p and q, are mostly 0.85–1.05 and 0–0.2, respectively, embodying the fact that the asymmetric component is generally much smaller than the symmetric component. The asymmetry in 34-kt surface wind is much stronger than that in 50and 64-kt surface winds, with the maximum radius often in the northeast quadrant.

Effects of Turbulent Dispersion on the Wind Speed Profile in the Surface Layer

New Reynolds mean momentum equations including turbulent viscosity and dispersion are used to analyze the vertical profile of wind speed in the surface layer. It is demonstrated that the wind profile of the surface layer including turbulent dispersion has a logarithmic modification on the classical power law. Under the condition of unstable stratification, the effect of dispersion is stronger than under stable stratification. Under neutral stratification, the power law degenerates to the logarithmic law, but the von Karman constant is replaced by k 1 = (1+ k / 4)−1 k, which can also be obtained by similarity theory.

Ship speed power performance under relative wind profiles in relation to sensor fault detection

Statistical data analysis and visualization approaches to identify ship speed power performance under relative wind(i.e.apparent wind)profiles are considered in this study.Ship performance and navigation data of a selected vessel are analyzed,where various data anomalies,i.e.sensor related erroneous data conditions,are identified.Those erroneous data conditions are investigated and several approaches to isolate such situations are also presented by considering appropriate data visualization methods.Then,the cleaned data are used to derive various relationships among ship performance and navigation parameters that have been visualized in this study,appropriately.The results show that the wind profiles along ship routes can be used to evaluate vessel performance and navigation conditions by assuming the respective sea states relate to their wind conditions.Hence,the results are useful to derive appropriate mathematical models that represent ship performance and navigation conditions.Such mathematical models can be used for weather routing type applications(i.e.voyage planning),where the respective weather forecast can be used to derive optimal ship routes to improve vessel performance and reduce fuel consumption.This study presents not only an overview of statistical data analysis of ship performance and navigation data but also the respective challenges in data anomalies(i.e.erroneous data intervals and sensor faults)due to onboard sensors and data handling systems.Furthermore,the respective solutions to such challenges in data quality have also been presented by considering data visualization approaches.

Sensitivity of tropical cyclone damage costs to integrated wind profile

The dramatic tropical cyclone(TC)damages in coastal areas around the world have gained significant attention from asset owners,policy makers and engineers.The estimate of TC damage for a specific region of interest is informative of the preparedness and resilience of the area subjected to TC hazards,and thus should be conducted using a quantitative approach.A reasonable indicator of TC damage should incorporate not only the TC characteristics(e.g.,intensity,frequency and duration)but also the vulnerability of the TC-prone areas.In this paper,a new indicator is proposed to measure the TC threat,which takes into account both the TC characteristics and the vulnerability of the area.The indicator has two forms:the first one considers the maximum wind speed only and the second incorporates the integrated wind speed profile.The historical damage scenarios along the US East Coast,as well as those in Hong Kong,China,are examined to demonstrate the applicability of the proposed indicator.Results show that the proposed indicator is capable of representing the impact of TC wind field profile on the TC damage costs.The proposed indicator could be further used to project the future TC damages for areas subjected to TC hazards.

INFLUENCES OF NONSTATIONARY PROCESS ON INTERNAL PARAMETERS AND WIND PROFILES IN THE PLANETARY BOUNDARY LAYER

In this paper,under the assumption of neutral and barotropic atmosphere,by means of the analytic solution of motion equation of PBL,the influences of nonstationary process on the internal parameters u_*/A(A is the wind speed at the top of PBL)and ■(the angle between winds near the surface and at the top of PBL)of PBL are investigated in which the wind direction at the top of PBL is a periodic function of time but the wind speed at the top of PBL does not change.The u_*/A increases and ■ decreases when the wind direction at the top of PBL rotates anticlockwise and vice versa.Hence the parameterization of PBL in the large-scale models derived under the stationary condition should be corrected by accounting for the nonstationary process.The similar results are obtained in the numerical solution of the motion equation of PBL.The influences of this nonstationary process on the profiles of the wind in PBL are also analyzed.

Experimental Investigation of Reynolds Number Effect on Wind Turbine Profiles in the Cryogenic Wind Tunnel Cologne DNW-KKK

Wind turbine size has increased continuously and correspondingly also its Reynolds numbers. The Reynolds number effect can therefore no longer be ignored in design and optimization of wind turbines. Reliable profile test data should be available. A suitable facility for testing wind turbine profiles at high Reynolds numbers is the Cryogenic Wind Tunnel Cologne DNW-KKK. By means of injecting liquid nitrogen the tunnel can be cooled down to 100 K and the Reynolds number therefore can be raised accordingly. The maximum Reynolds number for 2D profile tests can reach 27x10^6. In this paper the test uncertainty and the flow quality of DNW-KKK were analyzed. Then some test results on the Reynolds number effect of the wind turbine profiles will be presented. The Reynolds number effect is different from model to model. Especially for thick profiles and flow control devices the Reynolds number effect is not always like the description in literature.