Terrain-influenced wind flow of the Qitai radio telescope site

The wind environment of a site is one of the important factors affecting the observation performance of large aperture and high-performance radio telescopes.Exploring the relationship between the effects of different terrains on wind flow is important to optimize the wind environment of the site.The terrain of the Qitai radio telescope(QTT)site located in east Tianshan Mountains at an elevation of about 1800 m was used to study the wind flow in the adjacent zone of antenna based on numerical simulation.The area from 600m south to 600m north of the antenna is defined as the antenna adjacent zone,and three groups of boundaries with different terrains are set up upstream and downstream,respectively.Since the zone where the antenna is located is a slope terrain,in order to verify the influence of terrain on the wind flow and to clarify the relationship between the influence of boundary terrain on the wind flow,a control group of horizontal terrain is constructed.The simulation results show that the wind flow is mainly influenced by the terrain.The highest elevation of the upstream and downstream boundary terrains affects the basic wind speed.The upstream boundary terrain has a greater impact on wind flow than the downstream boundary terrain.In addition,the wind speed profile index obtained by numerical simulation is smaller than the actual index for the wind from south.Therefore,the wind speed at the upper level(about 100 m)obtained by inversion based on the measured wind speed at the bottom(about 10 m)is also smaller than the actual wind speed.

3D Visual Plant Models in Computational Fluid Dynamics Simulation of Ambient Wind Flow around an Isolated Tree

Plants can reduce the velocity of wind and wind erosion and prevent the movement of sand.But it may be extremely difficult to measure directly the aerodynamic characteristics of the airflow near the real vegetation in field experiments on account of restriction by many objective factors.Therefore,numerous investigations have been carried out to study the efficiency of windbreaks by conducting wind tunnel experiments on simulated models or using computational fluid dynamics(CFD) simulation instead of field measurements.Plant models are simplified at some level to be used for numerical simulation in existing literatures.It is a little distortion of leaves in details if the tree canopy is regarded as a whole region which can have a certain influence on the CFD simulation.Hence,one modeling approach that combines Visual Basic for applications(VBA) and computer aided design(CAD) technology is proposed to design 3D virtual plant models.The tree models used for numerical simulation of wind flow around trees are more lifelike.In addition,this method can be applied for creating a 3D virtual vegetation library.It is also more convenient to get the diversified biological indicators by digital plants in computer.

AN EXTENDED k-ε MODEL FOR NUMERICAL SIMULATION OF WIND FLOW AROUND BUILDINGS

It is assumed in this paper that for a high Reynolds number nearly homogeneouswind flow, the Reynolds stresses are uniquely related to the mean velocity gradientsand the two independent turbulent scaling parameters k and E. By applying dimensionalanalysis and owing to the Cayley-Hamilton theorem for tensors, a new turbulenceenclosure model so-called the axtended k-ε model has been developed. The coefficientsof the model expression were detemined by the wind tunnel experimental data ofhomogeneous shear turbulent flow. The model was compared with the standard k-εmodel in in composition and the prediction of the Reynold's normal Stresses. Using thenew model the numerical simulation of wind flow around a square cross-section tallbuilding was performed. The results show that the extended k-ε model improves theprediction of wind velocities around the building the building and wind pressures on the buildingenvelope.

Field Observations of Near-Surface Wind Flow Across Expressway Embankment on the Qinghai–Tibet Plateau

Crushed rock layers(CRLs),ventilation ducts(VDs)and thermosyphons are air-cooling structures(ACSs)widely used for maintaining the long-term stability of engineered infrastructures in permafrost environments.These ACSs can effectively cool and maintain the permafrost subgrade’s frozen state under climate warming by facilitating heat exchange with ambient air in cold seasons.As convection is a crucial working mechanism of these ACSs,it is imperative to understand the near-surface wind flow(NSWF)across a constructed infrastructure,such as an embankment.This article describes a yearlong field observation of the NSWF across an experimental expressway embankment,the first of its kind on the Qinghai–Tibet Plateau(QTP).The wind speed and direction along a transect perpendicular to the embankment on both the windward and leeward sides and at four different heights above the ground surface were collected and analyzed.The results showed that the embankment has a considerable impact on the NSWF speed within a distance of up to ten times its height,and in the direction on the leeward side.A power law can well describe the speed profiles of NSWF across the embankment,with the power-law indices(PLIs)varying from 0.14 to 0.40.On an annual basis,the fitted NSWF PLI far away from the embankment was 0.19,which differs substantially from the values widely used in previous thermal performance evaluations of ACSs on the QTP.Finally,the significance of the NSWF to the thermal performance of the ACSs,particularly the CRLs and VDs,in linear transportation infrastructure is discussed.It is concluded that underestimating the PLI and neglecting wind direction variations may lead to unconservative designs of the ACSs.The results reported in this study can provide valuable guidance for infrastructure engineering on the QTP and other similar permafrost regions.

Numerical study on surrounding rock mass temperature field of Kangding tunnel no.2 considering wind flow

Based on the Kangding Tunnel No.2 project,this study analyzes the heat exchange between air and the rock mass surrounding the tunnel under wind flow by the finite difference method.The influence of factors on the temperature field of a tunnel in cold regions,including ventilation and initial conditions,is investigated.The results show that:1)The lower the air temperature,the greater the wind speed,the larger the rock mass temperature influence circle and the greater the frozen depth;2)When the wind speed is less than 3 m/s,its change has an obvious impact on the rock mass temperature;3)For every drop of 5C in air temperature,the frozen depth increases by about 5 m,indicating that the air temperature is an essential factor affecting the rock mass temperature regime;4)The higher the initial rock mass temperature is,the smaller the influence circle on the rock mass is.And to a certain extent,it determines the temperature distribution in the rock mass within a specific range from the wall surface.

The Measuring System for Estimation of Power of Wind Flow Generated by Train Movement and Its Experimental Testing

The measuring system for estimation of power of wind flow generated by the train movement has been created. The advantages of the proposed system are the cheapness and simple design. With its simplicity of design and easy build-up of channels, designed measuring system can be used for a wide range of technical problems. This paper describes the design process, validation and conducting the first field test of this measuring system.

Numerical Investigation of Wind Flow around a Cylindrical Trough Solar Collector

The goal of this study is to model the effects of wind on Cylindrical Trough Collectors (CTCs). Two major areas are discussed in this paper: 1) heat losses due to wind flow over receiver pipe and 2) average forces applied on the collector’s body. To accomplish these goals a 2D modeling of CTC was carried out using commercial codes with various wind velocities and collector orientations. Ambient temperature was assumed to be constant at 300 K and for specific geometries different meshing methods and boundary conditions were used in various runs. Validation was done by comparing the simulation results for a horizontal collector with empirical data. It was observed that maximum force of 509.1 Newton per Meter occurs at +60 degrees. Nusselt number is almost the constant for positive angles while at negative angles it varies considerably with the collector’s orientation.

Pedestrian wind flow prediction using spatial-frequency generative adversarial network

Pedestrian wind flow is a critical factor in designing livable residential environments under growing complex urban conditions.Predicting pedestrian wind flow during the early design stages is essential but currently suffers from inefficiencies in numerical simulations.Deep learning,particularly generative adversarial networks(GAN),has been increasingly adopted as an alternative method to provide efficient prediction of pedestrian wind flow.However,existing GAN-based wind flow prediction schemes have limitations due to the lack of considering the spatial and frequency characteristics of wind flow images.This study proposes a novel approach termed SFGAN,which embeds spatial and frequency characteristics to enhance pedestrian wind flow prediction.In the spatial domain,Gaussian blur is employed to decompose wind flow into components containing wind speed and distinguished flow edges,which are used as the embedded spatial characteristics.Detailed information of wind flow is obtained through discrete wavelet transformation and used as the embedded frequency characteristics.These spatial and frequency characteristics of wind flow are jointly utilized to enforce consistency between the predicted wind flow and ground truth during the training phase,thereby leading to enhanced predictions.Experimental results demonstrate that SFGAN clearly improves wind flow prediction,reducing Wind_MAE,Wind_RMSE and the Fréchet Inception Distance(FID)score by 5.35%,6.52%and 12.30%,compared to the previous best method,respectively.We also analyze the effectiveness of incorporating the spatial and frequency characteristics of wind flow in predicting pedestrian wind flow.SFGAN reduces errors in predicting wind flow at large error intervals and performs well in wake regions and regions surrounding buildings.The enhanced predictions provide a better understanding of performance variability,bringing insights at the early design stage to improve pedestrian wind comfort.The proposed spatial-frequency loss term is general and can be flexibly integrated with other generative models to enhance performance with only a slight computational cost.

Large Scale Finite Element Modeling,Simulation and Visualization for Wind Flows in Urban Area Using Virtual Reality

A large-scale finite element modeling, simulation and visualization for wind flows are presented. The modeling method using GIS/CAD data is employed. The stabilized parallel finite element method based on SUPG/PSPG method is employed for the analysis of wind flows. The present method is applied to the simulation of wind flow and contaminant spread in urban area. The visualization based on virtual reality is employed to evaluate the mesh quality and computational results. The computed results are qualitatively in agreement with the experimental results and actual phenomena. The present method is shown to be a useful tool to simulate the wind flows in urban area.

Equivalent Method of Integrated Power Generation System of Wind, Photovoltaic and Energy Storage in Power Flow Calculation and Transient Simulation

针对工程实际开展风光储联合发电系统在潮流计算和机电暂态仿真中的等值方法研究，旨在为大容量风光储联合发电系统的并网仿真分析奠定基础。将潮流计算的等值分为单元机组和集电系统2部分来研究。单元机组等值采用根据不同控制模式选取不同节点类型的方法，针对集电系统等值提出基于损耗不变原则的方法。等值模型和详细模型的算例结果表明，潮流计算等值方法具有较好的精度。在机电暂态仿真动态等值中，基于实际工程计算的最严重工况分析原则，提出运行在满出力点的单机“倍乘”等值模型，为工程计算中的风光储联合发电系统动态等值提供了一种解决方案。

Progress on research and mitigation of wind-blown sand risk in Dunhuang Singing Sand Mountain and Crescent Spring Scenic area,China

The Singing Sand Mountain and Crescent Spring Scenic Spot in Dunhuang,Northwest China is a world-renowned desert attraction that is also an integral component of the Dunhuang UNESCO Global Geopark.This scenic area underwent a 30-year transformation,i.e.,from a severe sand risk with spring water threatened by sand burial due to dune deformation,to restoration of the original sand flow field and mitigation of the sand burial problem.The current paper summarizes the research on the intensive monitoring of the dynamic change of star dunes near the spring,observation of wind and sand flow movement,and then restoring the harmonic vibration of the sand particles(singing sand)that were previously silenced.The existing and prospective impacts of anthropogenic and natural forces on the deformation of the sand dunes are investigated by integrated methods,guiding the implementation of mitigating measures with significant ameliorative effects.Contrast to common sand control practices that aim to reduce wind speed and stop blown sands,our research highlights the importance of maintaining the natural wind flow field in stabilizing surrounding dunes.These mitigation measures consist of removing excessive vegetation and newly constructed buildings to recover the original wind flow field and sand transport activity.Such research and mitigation efforts ensure the scientific protection and restoration of the special desert landform,and contribute to the mutual enhancement of the conservation and exploitation of this desert scenic spot and similar sites.

Detached-eddy simulation of flow around high-speed train on a bridge under cross winds

In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge model are employed, Numerical wind tunnel technology based on computational fluid dynamics(CFD) is used, and the CFD models are set as stationary models. The Reynolds number of the flow, based on the inflow velocity and the height of the vehicle, is 1.9×10~6. The computations are conducted under three cases, train on the windward track on the bridge(WWC), train on the leeward track on the bridge(LWC) and train on the flat ground(FGC). Commercial software FLUENT is used and the mesh sensitivity research is carried out by three different grids: coarse, medium and fine. Results show that compared with FGC case, the side force coefficients of the head cars for the WWC and LWC cases increases by 14% and 29%, respectively; the coefficients of middle cars for the WWC and LWC increase by 32% and 10%, respectively; and that of the tail car increases by 45% for the WWC whereas decreases by 2% for the LWC case. The most notable thing is that the side force and the rolling moment of the head car are greater for the LWC, while the side force and the rolling moment of the middle car and the tail car are greater for the WWC. Comparing the velocity profiles at different locations, the flow is significantly influenced by the bridge-train system when the air is close to it. For the three cases(WWC, LWC and FGC), the pressure on the windward side of train is mostly positive while that of the leeward side is negative. The discrepancy of train's aerodynamic force is due to the different surface area of positive pressure and negative pressure zone. Many vortices are born on the leeward edge of the roofs. Theses vortices develop downstream, detach and dissipate into the wake region. The eddies develop irregularly, leading to a noticeably turbulent flow at leeward side of train.

Experimental Investigation of Performance of the Wind Turbine with the Flanged-Diffuser Shroud in Sinusoidally Oscillating and Fluctuating Velocity Flows

The wind turbine with a flanged-diffuser shroud—so called “wind-lens turbine”—is developed as one of high performance wind turbines by Ohya et al. In this paper, the wind turbine performance is investigated for both steady and unsteady winds. The compact-type wind lens turbine shows higher efficiency than the only rotor wind turbine. Also, the flow structure around the compact-type wind turbine is made clear by CFD and PIV in steady wind. Furthermore, the performances of the only rotor and the compact-type wind-lens turbines for unsteady wind are experimentally and numerically investigated. Experimental and numerical results are presented to demonstrate the dependence of frequency of the harmonic oscillating velocity wind on power coefficient. Consequently, the compact-type wind-lens turbine show better performance than the only rotor one in sinusoidally oscillating velocity wind. Furthermore, the numerical estimation can predict the power coefficient in the oscillating flows to an accuracy of 94% to 102%. In addition, the dependence of the turbine performance on turbulent intensity and vortex scale of natural fluctuating wind is presented.

Flow Simulation to Determine the Effects of Shrouds on the Performance of Wind Turbines

This paper describes a flow simulation model used to determine the effects of a shroud on the performance of a wind turbine. Also, it focuses on comparing the standard type of wind turbines— upwind turbine with three blades fixed on a horizontal axis—with a new type that is called a shrouded wind turbine. In addition, the two types of turbines are compared in terms of velocities profiles, pressure distribution and power output when applying four different velocities of winds: 10, 20, 30, 40 mph. Numerical values and graphs are highlighted in order to show the main differences between the shrouded turbine and the conventional one. Finally, a conclusion and some recommendations are provided to summarize the scope of this research and give a better prediction for a future optimal design of the shrouded turbines.

Probabilistic Load Flow Considering Correlation between Generation, Loads and Wind Power

In this paper a procedure is established for solving the Probabilistic Load Flow in an electrical power network, considering correlation between power generated by power plants, loads demanded on each bus and power injected by wind farms. The method proposed is based on the generation of correlated series of power values, which can be used in a MonteCarlo simulation, to obtain the probability density function of the power through branches of an electrical network.

Wind Power Flow Optimization and Control System Based on Rapid Energy Storage

风电功率的间歇与波动致使电场容量可信度低、可调度性差；同时易引起局部电网的电压不稳、频率波动，影响了系统的电能质量及稳定性。针对此现象，将超级电容器与蓄电池组成快速储能装置，用于风电的潮流优化控制。采用三重双向直流变换电路控制储能元件间的功率流动；采用四象限交直流变换电路控制储能与电网间的能量交换。提出基于超级电容器电压低频波动抑制的功率分配方法，可显著减少蓄电池的充放次数；提出基于储能元件荷电状态的储能能量调整规则，可避免储能元件的过充和频繁深度放电，以优化其功率调节能力。实验结果表明，系统可实现2种储能元件的优势互补，能有效平滑调节风电注入电网的有功功率，并实时补偿控制风电接入点的无功功率。

Wind Field Flow Characteristics Analysis of T4-72 Type Centrifugal Fan

In order to explore the internal wind field flow characteristics of T4-72 type centrifugal fan, the three-dimensional model was established based on PRO/E software. Combined with computational fluid Dynamics Software Fluent 6.3, the standard model and SIMPLEC algorithm were used to simulate the wind field inside the fan. Analysis of the flow characteristics, velocity distributed and pressure distributed of the internal fluid model of the T4-72 centrifugal fan, combined with the theoretical formula to obtain the full pressure, power and efficiency performance parameters of the fan. The centrifugal fan performance curve is drawn. While compared with the experimental data, it is found that the internal flow disturbance is strong when the fan is running under low load condition and high load condition, which affects the performance of the fan and reduces the life of the fan. The numerical simulation results are consistent with the experimental results. The overall performance parameters of the fan are in good agreement, verifying the reliability of the simulation results;when the fan works between 1 - 1.4 times the rated flow rate, it can obtain a more stable flow field while maintaining higher efficiency, which provides a new idea for the optimization of the subsequent fan.

NumericaI Computation of Flow over a Train in Cross-Wind

A finite different method is developed to predict the side force on a high speedtrain in a cross-wind at low yaw anglee. The k-εturbulence model with wallfunctions is employed. the solution algorithm is based on curvilinearnonorthogonal coordinates,covariant velocity components ,and staggered gridarrangement. The convective fluxes are described by the Power tow Scheme.A highly deformed grid generated with an elliptic grid generator is used aroundthe comero of the cross-section of the train. The results obtained comparepositively with wind tunnel experinients.

Experimental and Numerical Investigation on the Flow Characteristics around a Cross-Flow Wind Turbine

This study investigated the flow characteristics around a cross-flow wind turbine. A wind tunnel experiment (WTE) was performed to measure the flow characteristics past the wind turbine when operating at the optimal tip-speed ratio of λ = 0.4. In addition, computational fluid dynamics (CFD) simulations were performed for the flow field around the wind turbine that was operating at tip-speed ratios of λ = 0.1, 0.4, and 0.7. The CFD approach was validated against the WTE measurements. CFD results confirmed that with an increase in λ, the velocity deficit was generally increased in the leeward of the return side of the wind turbine, while it was generally decreased in the leeward of the drive side of the wind turbine. It was also confirmed that with an increase in λ, the turbulence kinetic energy was generally increased in the leeward of the return side of the wind turbine, while it generally decreased in the leeward of the drive side of the wind turbine.

Asymptotically Optimal Scenario Analysis and Wait-and-See Model for Optimal Power Flow With Wind Power

精确模拟风功率分布的场景,有效求解反映风电随机性的最优潮流模型,对大规模风电并网的经济调度、质量控制及安全运行均具有重要意义。引入风电随机变量,建立最优潮流的＂wait-and-see＂（WS-OPF）模型;采用优于其他指标的瓦瑟斯坦（Wasserstein）距离为衡量指标,形成与风功率概率分布最优近似的场景模型,生成渐近最优场景,获得潮流分布及机组最优出力等指导调度安全经济运行的重要信息。最后,以IEEE 30和IEEE 300系统为例,对比各种距离指标的模拟精度,验证Wasserstein距离的优良性;同时,与不考虑风电随机性的模型相比,WS-OPF模型能更好地模拟风功率随机特性,提供与实际发生的风功率相近的调度方案,从而合理地规避风电接入电网的风险,提高风电的消纳能力。