This article analyzes and discusses the working principle and problems encountered by various servo amplification devices used in the on-site continuous adjustment system,analyzes and discusses the application of the ...This article analyzes and discusses the working principle and problems encountered by various servo amplification devices used in the on-site continuous adjustment system,analyzes and discusses the application of the servo mechanism,and analyzes the mechanism of the servo device's implementation of the"positioning"func-tion on the control device.Intended to guide the continuous adjustment process in controlling the function/accuracy of actuator equipment and application debugging,ensuring the safe and stable operation of production equipment and facilities.展开更多
On July 22, 2014, the second group of national human rights education and train- ing bases was announced,increasing the number of national bases from the previous three to a total of eight, which reflects the advancem...On July 22, 2014, the second group of national human rights education and train- ing bases was announced,increasing the number of national bases from the previous three to a total of eight, which reflects the advancement of human rights education and ~aining in China and has far-reaching significance.展开更多
As hundreds of millions of distributed devices appear in every corner of our lives for information collection and transmission in big data era,the biggest challenge is the energy supply for these devices and the signa...As hundreds of millions of distributed devices appear in every corner of our lives for information collection and transmission in big data era,the biggest challenge is the energy supply for these devices and the signal transmission of sensors.Triboelectric nanogenerator(TENG)as a new energy technology meets the increasing demand of today’s distributed energy supply due to its ability to convert the ambient mechanical energy into electric energy.Meanwhile,TENG can also be used as a sensing system.Direct current triboelectric nanogenerator(DC-TENG)can directly supply power to electronic devices without additional rectification.It has been one of the most important developments of TENG in recent years.Herein,we review recent progress in the novel structure designs,working mechanism and corresponding method to improve the output performance for DC-TENGs from the aspect of mechanical rectifier,tribovoltaic effect,phase control,mechanical delay switch and air-discharge.The basic theory of each mode,key merits and potential development are discussed in detail.At last,we provide a guideline for future challenges of DC-TENGs,and a strategy for improving the output performance for commercial applications.展开更多
Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implement...Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and selfpowered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented.展开更多
With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promisin...With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promising candidates for the next generation of power generation energy storage batteries,and have been extensively researched.Though many fundamental and technological issues still need to be resolved to develop commercially viable technologies,SSLSBs using SSEs are expected to address the present limitations and achieve high energy and power density while improving safety,which is very attractive to large-scale energy storage systems.SSLSBs have been developed for many years.However,there are few systematic discussions related to the working mechanism of action of various electrolytes in SSLSBs and the defects and the corresponding solutions of various electrolytes.To fill this gap,it is very meaningful to review the recent progress of SSEs in SSLSBs.In this review,we comprehensively investigate and summarize the application of SSEs in LSBs to determine the differences which still exist between current progresses and real-world requirements,and comprehensively describe the mechanism of action of SSLSBs,including lithium-ion transport,interfacial contact,and catalytic conversion mechanisms.More importantly,the selection of solid electrolyte materials and the novel design of structures are reviewed and the properties of various SSEs are elucidated.Finally,the prospects and possible future research directions of SSLSBs including designing high electronic/ionic conductivity for cathodes,optimizing electrolytes and developing novel electrolytes with excellent properties,improving electrode/-electrolyte interface stability and enhancing interfacial dynamics between electrolyte and anode,using more advanced test equipment and characterization techniques to analyze conduction mechanism of Li^(+)in SSEs are presented.It is hoped that this review can arouse people’s attention and enlighten the development of functional materials and novel structures of SSEs in the next step.展开更多
Early-stage fire-warning systems(EFWSs)have attracted significant attention owing to their superiority in detecting fire situations occurring in the pre-combustion process.Substantial progress on EFWSs has been achiev...Early-stage fire-warning systems(EFWSs)have attracted significant attention owing to their superiority in detecting fire situations occurring in the pre-combustion process.Substantial progress on EFWSs has been achieved recently,and they have presented a considerable possibility for more evacuation time to control constant unintentional fire hazards in our daily life.This review mainly makes a comprehensive summary of the current EFWSs,including the working mechanisms and their performance.According to the different working mechanisms,fire alarms can be classified into graphene oxide-based fire alarms,semiconductor-based fire alarms,thermoelectric-based fire alarms,and fire alarms on other working mechanisms.Finally,the challenge and prospect for EFWSs are briefly provided by comparing the art of state of fire alarms.This work can propose a more comprehensive understanding of EFWSs and a guideline for the cutting-edge development direction of EFWSs for readers.展开更多
In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2...In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)(NCA))have been arousing great interests to improve the energy density of LIBs.However,these Nirich cathodes always suffer from rapid capacity degradation induced by unstable cathode-electrolyte interphase(CEI)layer and destruction of bulk crystal structure.Therefore,varied electrode/electrolyte interface engineering strategies(such as electrolyte formulation,material coating or doping)have been developed for Ni-rich cathodes protection.Among them,developing electrolyte functional additives has been proven to be a simple,effective,and economic method to improve the cycling stability of Nirich cathodes.This is achieved by removing unfavorable species(such as HF,H_(2)O)or constructing a stable and protective CEI layer against unfavorable reactive species(such as HF,H_(2)O).Herein,this review mainly introduces the varied classes of electrolyte functional additives and their working mechanism for interfacial engineering of Ni-rich cathodes.Especially,key favorable species for stabilizing CEI layer are summarized.More importantly,we put forward perspectives for screening and customizing ideal functional additives for high performance Ni-rich cathodes based LIBs.展开更多
By combing the characteristics of drilling in Antarctic region, performance requirements on drilling fluid for Antarctic low temperature conditions, and research progress of low temperature drilling fluid, current pro...By combing the characteristics of drilling in Antarctic region, performance requirements on drilling fluid for Antarctic low temperature conditions, and research progress of low temperature drilling fluid, current problems of the drilling fluid have been sorted out, and the development direction of the drilling fluid has been pointed out. Drilling in the Antarctic region mainly includes drilling in snow, ice and subglacial rock formations, and drilling in Antarctic low temperature conditions will face problems in four aspects:(1) low temperature and large temperature changes in the drilling area;(2) likely well leakage and drillstring-sticking in the snow layer, creep in the ice layer, ice chip gathering jamming in the warm ice layer, well wall collapse in the subglacial rock formations;(3) lack of infrastructure and difficulty in logistical support;(4) fragile environment and low carrying capacity. After years of development, progresses have been made on low-temperature drilling fluids for the Antarctic region. Low-temperature petroleum-based drilling fluid, ethanol/ethylene glycol-based drilling fluid, ester-based drilling fluid and silicone oil-based drilling fluid have been developed. However, these drilling fluids have problems such as insufficient low-temperature tolerance, low environmental performance and weak wellbore stability, etc. In order to meet the performance requirements of drilling fluid under low-temperature conditions in Antarctic region, the working mechanisms of low-temperature drilling fluid must be examined in depth;environment-friendly low-temperature base fluid of drilling fluid and related additives must be developed to prepare environmentally friendly low temperature drilling fluid systems;multi-functional integrated adjustment method for drilling fluid must be worked out to ensure well wall stability and improve cutting-carry capacity when drilling ice formations and ice-rock interlayers;and on-site support operation codes must be established to provide technical support for Antarctic drilling.展开更多
Zn dendrite growth and water-related side reactions have been criticized to hinder actual applications of aqueous Zn-ion batteries.To address these issues,a series of Zn interfacial modifications of building solid/ele...Zn dendrite growth and water-related side reactions have been criticized to hinder actual applications of aqueous Zn-ion batteries.To address these issues,a series of Zn interfacial modifications of building solid/electrolyte interphase(SEI)and nucleation layers have been widely proposed,however,their effectiveness remains debatable.Here,we report a boron nitride(BN)/Nafion layer on the Zn surface to efficiently solve Zn problems through combining the hybrid working mechanisms of SEI and nucleation layers.In our protective layer,Nafion exhibits the SEI mechanism by blocking water from the Zn surface and providing abundant channels for rapid Zn^(2+)þtransmission,whilst BN nanosheets induce Zn deposition underneath with a preferred(002)orientation.Accordingly,dendrite-free and side-reaction-free Zn electrode with(002)deposition under the protective layer is realized for the first time,as reflected by its high reversibility with average Coulombic efficiency of 99.2%for>3000 h.The protected Zn electrode also shows excellent performance in full cells when coupling with polyaniline cathode under the strict condition of lean electrolyte addition.This work highlights insights for designing highly reversible metal electrodes towards practical applications.展开更多
Working memory(WM)allows humans to hold necessary information in temporary storage and manipulate such information online for higher-order cognitive functions,such as language understanding,decision making,and probl...Working memory(WM)allows humans to hold necessary information in temporary storage and manipulate such information online for higher-order cognitive functions,such as language understanding,decision making,and problem solving.Since its first appearance in the science of psychology in the 1960s,many theories have sought to elucidate the nature of WM.The most accepted model is展开更多
Psychological health education has been highly valued by the party and the state.During the fight against the COVID-19,colleges and universities have made a beneficial exploration in carrying out psychological health ...Psychological health education has been highly valued by the party and the state.During the fight against the COVID-19,colleges and universities have made a beneficial exploration in carrying out psychological health education.In older to further understand the impact of the epidemic on the psychological health of college students,a survey was carried out based on questionnaire survey,depth interview and expert consultation.The survey found that the epidemic increased the psychological pressure and posed new challenges to the psychological health education in colleges and universities.Based on the analysis of the causes from the four aspects of society,family,college and individual,this thesis put forwards some suggestions on how to effectively carry out the psychological health education of college students in the context of fighting against the epidemic.展开更多
The power router(PR)is a promising piece of equipment for realizing multi-voltage level interconnection and flex-ible power control in the future distribution power grid.In this paper,a hybrid PR(HPR)topology based on...The power router(PR)is a promising piece of equipment for realizing multi-voltage level interconnection and flex-ible power control in the future distribution power grid.In this paper,a hybrid PR(HPR)topology based on power-frequency transformer electromagnetic coupling with converters is proposed for the medium distribution power grid.The power-frequency transformer is used to undertake power transmission,voltage conversion,and other main tasks,while the power electronic converters are combined to achieve active control.Equivalent magnetic and electrical circuit models are established to help discuss the operating principle of the proposed HPR.Additionally,the power flow and control principle of the HPR in different operating conditions are analyzed,with the control system design scheme presented.The theoretical analysis results are verified by MATLAB/Simulink+Plecs simulation and a controller hardware-in-the-loop study,as well as a down-scale experimental test,indicating that the proposed HPR is flexible in active voltage support and current control.展开更多
I graduated from the National Peiyang University (now called Tianjin University) in 1950, majoring in hydraulic engineering. Starting from 1952, my teaching work was basically in mechanics.My first academic probe was ...I graduated from the National Peiyang University (now called Tianjin University) in 1950, majoring in hydraulic engineering. Starting from 1952, my teaching work was basically in mechanics.My first academic probe was in cybernetics, resulting in the publication of the first Chinese paper concerning optimal control. After 1963, I worked on the theory of hydrodynamic stability. My explorative thrust is at the eigenvalues of the Orr Sommerfeld Equation,a non-self adjoint problem in展开更多
The lubrication behavior of double enveloping hourglass worm gearing is studied experimently. The effects of rotational speed of the worm and load on the formation of the fluid film between engagement tooth ...The lubrication behavior of double enveloping hourglass worm gearing is studied experimently. The effects of rotational speed of the worm and load on the formation of the fluid film between engagement tooth surfaces are investigated in detail. and working angle of this worm gearing is also analyzed. Some beneficial results are obtained。展开更多
In the era of the Internet of Things(IoT),the provision of sustainable power to distributed,mobile,and low-power-consumption electronic devices is a critical challenge.To overcome this challenge,the triboelectric nano...In the era of the Internet of Things(IoT),the provision of sustainable power to distributed,mobile,and low-power-consumption electronic devices is a critical challenge.To overcome this challenge,the triboelectric nanogenerator(TENG),a highly efficient high-entropy mechanical energy harvesting device,was developed in 2012.This device enables the direct conversion of irregular and low-frequency mechanical energy into pulsed alternating current(AC)signals.However,the incompatibility of most electronic devices with AC signals necessitates rectifier circuits or generators that deliver direct current(DC)signals.In recent years,DC-TENGs have undergone extensive development,achieving significant milestones in various application fields while also facing crucial challenges that require solutions.In this review,three categories of DC-TENG devices with distinct operating mechanisms are comprehensively explored:multiphase coupling,mechanical rectification,and air breakdown.Their typical structures and working mechanisms are thoroughly discussed,and specific output performance limitations,along with corresponding optimization strategies,are identified.Furthermore,the applications of DC-TENGs in various scenarios are summarized.Finally,the challenges faced by DC-TENGs and potential solutions are analyzed to guide further advancements in this technology.展开更多
The working mechanism of sensors plays an important role in their simulation and design, which is the foundation of their applications. A model of a nanotube NO2 gas sensor system is established based on an (8, 0) s...The working mechanism of sensors plays an important role in their simulation and design, which is the foundation of their applications. A model of a nanotube NO2 gas sensor system is established based on an (8, 0) silicon carbide nanotube (SiCNT) with a NO2 molecule adsorbed. The transport properties of the system are studied with a method combining density functional theory (DFT) with the non-equilibrium Green's function (NEGF). The adsorbed gas molecule plays an important role in the transport properties of the gas sensor, which results in the formation of a transmission peak near the Fermi energy. More importantly, the adsorption leads to different voltage current characteristics of the sensor to that with no adsorption; the difference is large enough to detect the presence of NO2 gas.展开更多
Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promisi...Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.展开更多
Rechargeable aqueous Zn/MnO_(2)batteries raise massive research activities in recent years. However, both the working principle and the degradation mechanism of this battery chemistry are still under debate. Herein, w...Rechargeable aqueous Zn/MnO_(2)batteries raise massive research activities in recent years. However, both the working principle and the degradation mechanism of this battery chemistry are still under debate. Herein, we provide an in-depth electrochemical and structural investigation on this controversial issue based on α-MnO_(2)crystalline nanowires. Mechanistic analysis substantiates a two-electron reaction pathway of Mn2+/Mn4+redox couple from part of MnO_(2)accompanying with a reversible precipitation/dissolution of flaky zinc sulfate hydroxide(ZSH) during the discharge/charge processes. The formation of the ZSH layer is double-edged, which passivates the deep dissolution of MnO_(2)upon discharging,but promotes the electrochemical deposition kinetics of active MnO_(2)upon charging. The cell degradation originates primarily from the corrosion failure of metallic zinc anode and the accumulation of irreversible ZnMn2O_(4)phases on the cathode. The addition of MnSO_(4)to the electrolyte could afford supplementary capacity contribution via electro-oxidation of Mn2+. However, a high MnSO_(4)concentration will expedite the cell failure by corroding the metallic zinc anodes. The present study will shed a fundamental insight on developing new strategies toward practically viable Zn/MnO_(2)batteries.展开更多
In this work, the Mg–5Al–2Ca alloy was extruded at 573, 623 and 673 K, with a ratio of 16:1 and a constant speed of 3 mm/s. Results demonstrate that the Al2Ca particle is formed in Mg–5Al–2Ca alloy. The size, amo...In this work, the Mg–5Al–2Ca alloy was extruded at 573, 623 and 673 K, with a ratio of 16:1 and a constant speed of 3 mm/s. Results demonstrate that the Al2Ca particle is formed in Mg–5Al–2Ca alloy. The size, amount and distribution of Al2Ca particles are influenced evidently by extrusion temperature. Unlike previous reports, the intensity of basal texture increases with increasing extrusion temperature, and the reasons are analyzed and given. Even though the average grain size increases as the extrusion temperature increased from 573 to 623 K, the YS, UTS and elongation of asextruded Mg–5Al–2Ca alloy are almost kept the same at 573 and 623 K. The reason is speculated as the balance of grain size, Al2Ca phase and texture at the two temperatures. The work hardening rate depends on extrusion temperature, and the largest θ value of Mg–5Al–2Ca alloy is obtained when the extrusion was performed at 623 K.展开更多
The effects of deforming temperatures on the tensile behaviors of quenching and partitioning treated steels were investigated. It was found that the ultimate tensile strength of the steel decreased with the increasing...The effects of deforming temperatures on the tensile behaviors of quenching and partitioning treated steels were investigated. It was found that the ultimate tensile strength of the steel decreased with the increasing temperature from 25 to 100 ℃, reached the maximum value at 300 ℃, and then declined by a significant extent when the temperature further reached 400 ℃. The total elongations at 100, 200 and 300 ℃are at about the same level. The steel achieved optimal mechanical properties at 300 ℃due to the proper transformation behavior of retained austenite since the stability of retained austenite is largely dependent on the deforming temperature. When tested at 100 and 200 ℃, the retained aus tenite was reluctant to transform, while at the other temperatures, about 10 vol. % of retained aus- tenite transformed during the tensile tests. The relationship between the stability of retained austenite and the work hardening behavior of quenching and partitioning treated steels at different deforming temperatures was also studied and discussed in detail. In order to obtain excellent mechanical properties, the stability of retained austenite should be carefully controlled so that the effect of transforma tion-induced plasticity could take place continuously during plastic deformation.展开更多
文摘This article analyzes and discusses the working principle and problems encountered by various servo amplification devices used in the on-site continuous adjustment system,analyzes and discusses the application of the servo mechanism,and analyzes the mechanism of the servo device's implementation of the"positioning"func-tion on the control device.Intended to guide the continuous adjustment process in controlling the function/accuracy of actuator equipment and application debugging,ensuring the safe and stable operation of production equipment and facilities.
文摘On July 22, 2014, the second group of national human rights education and train- ing bases was announced,increasing the number of national bases from the previous three to a total of eight, which reflects the advancement of human rights education and ~aining in China and has far-reaching significance.
基金supported by The National Key R&D Project from Minister of Science and Technology(2021YFA1201602)the National Natural Science Foundation of China(U21A20147,52073037).
文摘As hundreds of millions of distributed devices appear in every corner of our lives for information collection and transmission in big data era,the biggest challenge is the energy supply for these devices and the signal transmission of sensors.Triboelectric nanogenerator(TENG)as a new energy technology meets the increasing demand of today’s distributed energy supply due to its ability to convert the ambient mechanical energy into electric energy.Meanwhile,TENG can also be used as a sensing system.Direct current triboelectric nanogenerator(DC-TENG)can directly supply power to electronic devices without additional rectification.It has been one of the most important developments of TENG in recent years.Herein,we review recent progress in the novel structure designs,working mechanism and corresponding method to improve the output performance for DC-TENGs from the aspect of mechanical rectifier,tribovoltaic effect,phase control,mechanical delay switch and air-discharge.The basic theory of each mode,key merits and potential development are discussed in detail.At last,we provide a guideline for future challenges of DC-TENGs,and a strategy for improving the output performance for commercial applications.
基金supported financially by the National Key R&D Program of China (Nos. 2018YFA0208501 and 2018YFA0703200)the National Natural Science Foundation of China (NSFC, Nos. 52103236, 91963212, 21875260)Beijing National Laboratory for Molecular Sciences (No. BNLMSCXXM-202005)。
文摘Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and selfpowered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented.
基金supported by the National Natural Science Foundation of China(52203066,51973157,51673148,51678411)the Science and Technology Plans of Tianjin,China(19PTSYJC00010)+3 种基金the China Postdoctoral Science Foundation Grant(2019M651047)the Tianjin Research Innovation Project for Postgraduate Students,China(2020YJSB062)the Tianjin Municipal college student’innovation and entrepreneurship training program,China(202110058052)the National innovation and entrepreneurship training program for college students,China(202110058017)。
文摘With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promising candidates for the next generation of power generation energy storage batteries,and have been extensively researched.Though many fundamental and technological issues still need to be resolved to develop commercially viable technologies,SSLSBs using SSEs are expected to address the present limitations and achieve high energy and power density while improving safety,which is very attractive to large-scale energy storage systems.SSLSBs have been developed for many years.However,there are few systematic discussions related to the working mechanism of action of various electrolytes in SSLSBs and the defects and the corresponding solutions of various electrolytes.To fill this gap,it is very meaningful to review the recent progress of SSEs in SSLSBs.In this review,we comprehensively investigate and summarize the application of SSEs in LSBs to determine the differences which still exist between current progresses and real-world requirements,and comprehensively describe the mechanism of action of SSLSBs,including lithium-ion transport,interfacial contact,and catalytic conversion mechanisms.More importantly,the selection of solid electrolyte materials and the novel design of structures are reviewed and the properties of various SSEs are elucidated.Finally,the prospects and possible future research directions of SSLSBs including designing high electronic/ionic conductivity for cathodes,optimizing electrolytes and developing novel electrolytes with excellent properties,improving electrode/-electrolyte interface stability and enhancing interfacial dynamics between electrolyte and anode,using more advanced test equipment and characterization techniques to analyze conduction mechanism of Li^(+)in SSEs are presented.It is hoped that this review can arouse people’s attention and enlighten the development of functional materials and novel structures of SSEs in the next step.
基金This work was partially supported by the China Scholarship Council under the Grant CSC(201908110272)BIOFIRESAFE Project funded by Ministerio De Ciencia E Innovacion,Spain,with the project numbers:PID2020-117274RB-I00BIOFIRESAFE and PEJ-2018 MINECO.
文摘Early-stage fire-warning systems(EFWSs)have attracted significant attention owing to their superiority in detecting fire situations occurring in the pre-combustion process.Substantial progress on EFWSs has been achieved recently,and they have presented a considerable possibility for more evacuation time to control constant unintentional fire hazards in our daily life.This review mainly makes a comprehensive summary of the current EFWSs,including the working mechanisms and their performance.According to the different working mechanisms,fire alarms can be classified into graphene oxide-based fire alarms,semiconductor-based fire alarms,thermoelectric-based fire alarms,and fire alarms on other working mechanisms.Finally,the challenge and prospect for EFWSs are briefly provided by comparing the art of state of fire alarms.This work can propose a more comprehensive understanding of EFWSs and a guideline for the cutting-edge development direction of EFWSs for readers.
基金supported by the National Key R&D Program of China(Grant No.2017YFE0127600)the National Natural Science Foundation of China(Grant No.U1706229、21901248)+2 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA22010600)the National Natural Science Foundation for Distinguished Young Scholars of China(No.51625204)the Taishan Scholars of Shandong Province(ts201511063)。
文摘In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)(NCA))have been arousing great interests to improve the energy density of LIBs.However,these Nirich cathodes always suffer from rapid capacity degradation induced by unstable cathode-electrolyte interphase(CEI)layer and destruction of bulk crystal structure.Therefore,varied electrode/electrolyte interface engineering strategies(such as electrolyte formulation,material coating or doping)have been developed for Ni-rich cathodes protection.Among them,developing electrolyte functional additives has been proven to be a simple,effective,and economic method to improve the cycling stability of Nirich cathodes.This is achieved by removing unfavorable species(such as HF,H_(2)O)or constructing a stable and protective CEI layer against unfavorable reactive species(such as HF,H_(2)O).Herein,this review mainly introduces the varied classes of electrolyte functional additives and their working mechanism for interfacial engineering of Ni-rich cathodes.Especially,key favorable species for stabilizing CEI layer are summarized.More importantly,we put forward perspectives for screening and customizing ideal functional additives for high performance Ni-rich cathodes based LIBs.
文摘By combing the characteristics of drilling in Antarctic region, performance requirements on drilling fluid for Antarctic low temperature conditions, and research progress of low temperature drilling fluid, current problems of the drilling fluid have been sorted out, and the development direction of the drilling fluid has been pointed out. Drilling in the Antarctic region mainly includes drilling in snow, ice and subglacial rock formations, and drilling in Antarctic low temperature conditions will face problems in four aspects:(1) low temperature and large temperature changes in the drilling area;(2) likely well leakage and drillstring-sticking in the snow layer, creep in the ice layer, ice chip gathering jamming in the warm ice layer, well wall collapse in the subglacial rock formations;(3) lack of infrastructure and difficulty in logistical support;(4) fragile environment and low carrying capacity. After years of development, progresses have been made on low-temperature drilling fluids for the Antarctic region. Low-temperature petroleum-based drilling fluid, ethanol/ethylene glycol-based drilling fluid, ester-based drilling fluid and silicone oil-based drilling fluid have been developed. However, these drilling fluids have problems such as insufficient low-temperature tolerance, low environmental performance and weak wellbore stability, etc. In order to meet the performance requirements of drilling fluid under low-temperature conditions in Antarctic region, the working mechanisms of low-temperature drilling fluid must be examined in depth;environment-friendly low-temperature base fluid of drilling fluid and related additives must be developed to prepare environmentally friendly low temperature drilling fluid systems;multi-functional integrated adjustment method for drilling fluid must be worked out to ensure well wall stability and improve cutting-carry capacity when drilling ice formations and ice-rock interlayers;and on-site support operation codes must be established to provide technical support for Antarctic drilling.
基金The authors gratefully acknowledged the financial support from the Australian Research Council(ARC)(DP220102596,DP200100365,DE230100471,and FL170100154)DFT computations in this work were undertaken with the assistance of resources and services from the National Computational Infrastructure(NCI)and Phoenix High Performance Computing,which are supported by both Australian Government and the University of Adelaide.
文摘Zn dendrite growth and water-related side reactions have been criticized to hinder actual applications of aqueous Zn-ion batteries.To address these issues,a series of Zn interfacial modifications of building solid/electrolyte interphase(SEI)and nucleation layers have been widely proposed,however,their effectiveness remains debatable.Here,we report a boron nitride(BN)/Nafion layer on the Zn surface to efficiently solve Zn problems through combining the hybrid working mechanisms of SEI and nucleation layers.In our protective layer,Nafion exhibits the SEI mechanism by blocking water from the Zn surface and providing abundant channels for rapid Zn^(2+)þtransmission,whilst BN nanosheets induce Zn deposition underneath with a preferred(002)orientation.Accordingly,dendrite-free and side-reaction-free Zn electrode with(002)deposition under the protective layer is realized for the first time,as reflected by its high reversibility with average Coulombic efficiency of 99.2%for>3000 h.The protected Zn electrode also shows excellent performance in full cells when coupling with polyaniline cathode under the strict condition of lean electrolyte addition.This work highlights insights for designing highly reversible metal electrodes towards practical applications.
文摘Working memory(WM)allows humans to hold necessary information in temporary storage and manipulate such information online for higher-order cognitive functions,such as language understanding,decision making,and problem solving.Since its first appearance in the science of psychology in the 1960s,many theories have sought to elucidate the nature of WM.The most accepted model is
基金Hubei Province university student work quality general support project"practice exploration of non structural group consultation to improve college students'interpersonal skills"(2018XGJPX3010)Wuhan Institute of Technology 2019 humanities and social science project"early warning and intervention mechanism of psychological health risk of college":The construction of"great health"education pattern(R201903).
文摘Psychological health education has been highly valued by the party and the state.During the fight against the COVID-19,colleges and universities have made a beneficial exploration in carrying out psychological health education.In older to further understand the impact of the epidemic on the psychological health of college students,a survey was carried out based on questionnaire survey,depth interview and expert consultation.The survey found that the epidemic increased the psychological pressure and posed new challenges to the psychological health education in colleges and universities.Based on the analysis of the causes from the four aspects of society,family,college and individual,this thesis put forwards some suggestions on how to effectively carry out the psychological health education of college students in the context of fighting against the epidemic.
基金supported in part by the National Natural Science Foundation of China(Grant No.52007010)in part by State Key Laboratory of Advanced Electromagnetic Engineering and Technology(Grant No.AEET 2022KF003).
文摘The power router(PR)is a promising piece of equipment for realizing multi-voltage level interconnection and flex-ible power control in the future distribution power grid.In this paper,a hybrid PR(HPR)topology based on power-frequency transformer electromagnetic coupling with converters is proposed for the medium distribution power grid.The power-frequency transformer is used to undertake power transmission,voltage conversion,and other main tasks,while the power electronic converters are combined to achieve active control.Equivalent magnetic and electrical circuit models are established to help discuss the operating principle of the proposed HPR.Additionally,the power flow and control principle of the HPR in different operating conditions are analyzed,with the control system design scheme presented.The theoretical analysis results are verified by MATLAB/Simulink+Plecs simulation and a controller hardware-in-the-loop study,as well as a down-scale experimental test,indicating that the proposed HPR is flexible in active voltage support and current control.
文摘I graduated from the National Peiyang University (now called Tianjin University) in 1950, majoring in hydraulic engineering. Starting from 1952, my teaching work was basically in mechanics.My first academic probe was in cybernetics, resulting in the publication of the first Chinese paper concerning optimal control. After 1963, I worked on the theory of hydrodynamic stability. My explorative thrust is at the eigenvalues of the Orr Sommerfeld Equation,a non-self adjoint problem in
文摘The lubrication behavior of double enveloping hourglass worm gearing is studied experimently. The effects of rotational speed of the worm and load on the formation of the fluid film between engagement tooth surfaces are investigated in detail. and working angle of this worm gearing is also analyzed. Some beneficial results are obtained。
基金supported by the Postdoctoral Science Foundation(Grant No.2023M730419)the Ministry of Education“Chunhui Plan”Cooperative Scientific Research Project(Grant No.HZKY20220206)+2 种基金the Scientific and Technology Research Program of Chongqing Municipal Education Commission(Grant Nos.KJQN202100522,KJQN202200514 and KJQN202100514)the Natural Science Foundation of Chongqing(Grant No.cstc2021jcyj-msxmX0746)the Dr.“Through Train”Scientific Research Program(Grant No.CSTB2022BSXM-JCX0091)。
文摘In the era of the Internet of Things(IoT),the provision of sustainable power to distributed,mobile,and low-power-consumption electronic devices is a critical challenge.To overcome this challenge,the triboelectric nanogenerator(TENG),a highly efficient high-entropy mechanical energy harvesting device,was developed in 2012.This device enables the direct conversion of irregular and low-frequency mechanical energy into pulsed alternating current(AC)signals.However,the incompatibility of most electronic devices with AC signals necessitates rectifier circuits or generators that deliver direct current(DC)signals.In recent years,DC-TENGs have undergone extensive development,achieving significant milestones in various application fields while also facing crucial challenges that require solutions.In this review,three categories of DC-TENG devices with distinct operating mechanisms are comprehensively explored:multiphase coupling,mechanical rectification,and air breakdown.Their typical structures and working mechanisms are thoroughly discussed,and specific output performance limitations,along with corresponding optimization strategies,are identified.Furthermore,the applications of DC-TENGs in various scenarios are summarized.Finally,the challenges faced by DC-TENGs and potential solutions are analyzed to guide further advancements in this technology.
基金Project supported by the National Pre-Research Foundation of China (No.51308030201)
文摘The working mechanism of sensors plays an important role in their simulation and design, which is the foundation of their applications. A model of a nanotube NO2 gas sensor system is established based on an (8, 0) silicon carbide nanotube (SiCNT) with a NO2 molecule adsorbed. The transport properties of the system are studied with a method combining density functional theory (DFT) with the non-equilibrium Green's function (NEGF). The adsorbed gas molecule plays an important role in the transport properties of the gas sensor, which results in the formation of a transmission peak near the Fermi energy. More importantly, the adsorption leads to different voltage current characteristics of the sensor to that with no adsorption; the difference is large enough to detect the presence of NO2 gas.
基金supported by the National Natural Science Foundation of China(No.52170068 and U21A20161)the Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.QAK202108).
文摘Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.
基金the research fund of National Natural Science Foundation of China (No. 51821091)Fundamental Research Funds for the Central Universities (Nos.D5000210894 and 3102019JC005)。
文摘Rechargeable aqueous Zn/MnO_(2)batteries raise massive research activities in recent years. However, both the working principle and the degradation mechanism of this battery chemistry are still under debate. Herein, we provide an in-depth electrochemical and structural investigation on this controversial issue based on α-MnO_(2)crystalline nanowires. Mechanistic analysis substantiates a two-electron reaction pathway of Mn2+/Mn4+redox couple from part of MnO_(2)accompanying with a reversible precipitation/dissolution of flaky zinc sulfate hydroxide(ZSH) during the discharge/charge processes. The formation of the ZSH layer is double-edged, which passivates the deep dissolution of MnO_(2)upon discharging,but promotes the electrochemical deposition kinetics of active MnO_(2)upon charging. The cell degradation originates primarily from the corrosion failure of metallic zinc anode and the accumulation of irreversible ZnMn2O_(4)phases on the cathode. The addition of MnSO_(4)to the electrolyte could afford supplementary capacity contribution via electro-oxidation of Mn2+. However, a high MnSO_(4)concentration will expedite the cell failure by corroding the metallic zinc anodes. The present study will shed a fundamental insight on developing new strategies toward practically viable Zn/MnO_(2)batteries.
基金financially supported by the National Natural Science Foundation of China (Nos. 51201112, 51301120 and 51401144)the Natural Science Foundation of Shanxi (No. 2013021013-3)
文摘In this work, the Mg–5Al–2Ca alloy was extruded at 573, 623 and 673 K, with a ratio of 16:1 and a constant speed of 3 mm/s. Results demonstrate that the Al2Ca particle is formed in Mg–5Al–2Ca alloy. The size, amount and distribution of Al2Ca particles are influenced evidently by extrusion temperature. Unlike previous reports, the intensity of basal texture increases with increasing extrusion temperature, and the reasons are analyzed and given. Even though the average grain size increases as the extrusion temperature increased from 573 to 623 K, the YS, UTS and elongation of asextruded Mg–5Al–2Ca alloy are almost kept the same at 573 and 623 K. The reason is speculated as the balance of grain size, Al2Ca phase and texture at the two temperatures. The work hardening rate depends on extrusion temperature, and the largest θ value of Mg–5Al–2Ca alloy is obtained when the extrusion was performed at 623 K.
基金financial support of the National Key Research and Development Program of China(No.2017YFB0304401)National Natural Science Foundation of China(Nos.U1564203,51571141 and 51201105)the support provided by Shanghai Key Laboratory of Materials Laser Processing and Modification,Shanghai Jiao Tong University
文摘The effects of deforming temperatures on the tensile behaviors of quenching and partitioning treated steels were investigated. It was found that the ultimate tensile strength of the steel decreased with the increasing temperature from 25 to 100 ℃, reached the maximum value at 300 ℃, and then declined by a significant extent when the temperature further reached 400 ℃. The total elongations at 100, 200 and 300 ℃are at about the same level. The steel achieved optimal mechanical properties at 300 ℃due to the proper transformation behavior of retained austenite since the stability of retained austenite is largely dependent on the deforming temperature. When tested at 100 and 200 ℃, the retained aus tenite was reluctant to transform, while at the other temperatures, about 10 vol. % of retained aus- tenite transformed during the tensile tests. The relationship between the stability of retained austenite and the work hardening behavior of quenching and partitioning treated steels at different deforming temperatures was also studied and discussed in detail. In order to obtain excellent mechanical properties, the stability of retained austenite should be carefully controlled so that the effect of transforma tion-induced plasticity could take place continuously during plastic deformation.