The fast X-ray imaging beamline(BL16U2)at Shanghai Synchrotron Radiation Facility(SSRF)is a new beamline that provides X-ray micro-imaging capabilities across a wide range of time scales,spanning from 100 ps toμs and...The fast X-ray imaging beamline(BL16U2)at Shanghai Synchrotron Radiation Facility(SSRF)is a new beamline that provides X-ray micro-imaging capabilities across a wide range of time scales,spanning from 100 ps toμs and ms.This beamline has been specifically designed to facilitate the investigation of a wide range of rapid phenomena,such as the deformation and failure of materials subjected to intense dynamic loads.In addition,it enables the study of high-pressure and high-speed fuel spray processes in automotive engines.The light source of this beamline is a cryogenic permanent magnet undulator(CPMU)that is cooled by liquid nitrogen.This CPMU can generate X-ray photons within an energy range of 8.7-30 keV.The beamline offers two modes of operation:monochromatic beam mode with a liquid nitrogen-cooled double-crystal monochromator(DCM)and pink beam mode with the first crystal of the DCM out of the beam path.Four X-ray imaging methods were implemented in BL16U2:single-pulse ultrafast X-ray imaging,microsecond-resolved X-ray dynamic imaging,millisecond-resolved X-ray dynamic micro-CT,and high-resolution quantitative micro-CT.Furthermore,BL16U2 is equipped with various in situ impact loading systems,such as a split Hopkinson bar system,light gas gun,and fuel spray chamber.Following the completion of the final commissioning in 2021 and subsequent trial operations in 2022,the beamline has been officially available to users from 2023.展开更多
Background and Aims While chest X-ray (CXR) has been a conventional tool in intensive care units (ICUs) to identify lung pathologies, computed tomography (CT) scan remains the gold standard. Use of lung ultrasound (LU...Background and Aims While chest X-ray (CXR) has been a conventional tool in intensive care units (ICUs) to identify lung pathologies, computed tomography (CT) scan remains the gold standard. Use of lung ultrasound (LUS) in resource-rich ICUs is still under investigation. The present study compares the utility of LUS to that of CXR in identifying pulmonary edema and pleural effusion in ICU patients. In addition, consolidation and pneumothorax were analyzed as secondary outcome measures. Material and Methods This is a prospective, single centric, observational study. Patients admitted in ICU were examined for lung pathologies, using LUS by a trained intensivist;and CXR done within 4 hours of each other. The final diagnosis was ascertained by an independent senior radiologist, based on the complete medical chart including clinical findings and the results of thoracic CT, if available. The results were compared and analyzed. Results Sensitivity, specificity and diagnostic accuracy of LUS was 95%, 94.4%, 94.67% for pleural effusion;and 98.33%, 97.78%, 98.00% for pulmonary edema respectively. Corresponding values with CXR were 48.33%, 76.67%, 65.33% for pleural effusion;and 36.67%, 82.22% and 64.00% for pulmonary edema respectively. Sensitivity, specificity and diagnostic accuracy of LUS was 91.30%, 96.85%, 96.00% for consolidation;and 100.00%, 79.02%, 80.00% for pneumothorax respectively. Corresponding values with CXR were 60.87%, 81.10%, 78.00% for consolidation;and 71.3%, 97.20%, 96.00% for pneumothorax respectively. Conclusion LUS has better diagnostic accuracy in diagnosis of pleural effusion and pulmonary edema when compared with CXR and is thus recommended as an effective alternative for diagnosis of these conditions in acute care settings. Our study recommends that a thoracic CT scan can be avoided in most of such cases.展开更多
Gamma ray shielding is essential to ensure the safety of personnel and equipment in facilities and environments where radiation exists.The Monte Carlo technique is vital for analyzing the gamma-ray shielding capabilit...Gamma ray shielding is essential to ensure the safety of personnel and equipment in facilities and environments where radiation exists.The Monte Carlo technique is vital for analyzing the gamma-ray shielding capabilities of materials.In this study,a simple Monte Carlo code,EJUSTCO,is developed to cd simulate gamma radiation transport in shielding materials for academic purposes.The code considers the photoelectric effect,Compton(incoherent)scattering,pair production,and photon annihilation as the dominant interaction mechanisms in the gamma radiation shielding problem.Variance reduction techniques,such as the Russian roulette,survival weighting,and exponential transformation,are incorporated into the code to improve computational efficiency.Predicting the exponential transformation parameter typically requires trial and error as well as expertise.Herein,a deep learning neural network is proposed as a viable method for predicting this parameter for the first time.The model achieves an MSE of 0.00076752 and an R-value of 0.99998.The exposure buildup factors and radiation dose rates due to the passage of gamma radiation with different source energies and varying thicknesses of lead,water,iron,concrete,and aluminum in single-,double-,and triple-layer material systems are validated by comparing the results with those of MCNP,ESG,ANS-6.4.3,MCBLD,MONTEREY MARK(M),PENELOPE,and experiments.Average errors of 5.6%,2.75%,and 10%are achieved for the exposure buildup factor in single-,double-,and triple-layer materials,respectively.A significant parameter that is not considered in similar studies is the gamma ray albedo.In the EJUSTCO code,the total number and energy albedos have been computed.The results are compared with those of MCNP,FOTELP,and PENELOPE.In general,the EJUSTCO-developed code can be employed to assess the performance of radiation shielding materials because the validation results are consistent with theoretical,experimental,and literary results.展开更多
Electromagnetic interference(EMI)shielding materials with excellent flexibility and mechanical properties and outstanding thermal conductivity have become a hot topic of research in functional composites.In this study...Electromagnetic interference(EMI)shielding materials with excellent flexibility and mechanical properties and outstanding thermal conductivity have become a hot topic of research in functional composites.In this study,the“sol-gel-film conversion technique”is used to assemble polyetherimidefunctionalized Ti_(3)C_(2)T_(x) nanosheets(f-Ti_(3)C_(2)T_(x))with poly(p-phenylene-2,6-benzobisoxazole)(PBO)nanofibers(PNFs),followed by dialysis and vacuum drying to prepare f-Ti_(3)C_(2)T_(x)/PNF films with lamellar structures.When the loading of f-Ti_(3)C_(2)T_(x) is 70 wt%,the f-Ti_(3)C_(2)T_(x)/PNF film presents optimal comprehensive properties,with an EMI shielding effectiveness(SE)of 35 dB and a specific SE/thickness((SSE,SE/density)/t)of 8211 dB cm^(2)/g,a tensile strength of 125.1 MPa,an in-plane thermal conductivity coefficient(λ)of 5.82 W/(m K),and electrical conductivity of 1943 S/m.After repeated folding for 10,000 cycles,the EMI SE and the tensile strength of f-Ti_(3)C_(2)T_(x)/PNFs films still remain 33.4 dB and 116.1 MPa,respectively.Additionally,the f-Ti_(3)C_(2)T_(x)/PNF film also shows excellent thermal stability,flame retardancy,and structural stability.This would provide a novel method for the design and fabrication of multifunctional composite films and considerably expand the applications of MXene-and PNF-based composites in the fields of EMI shielding and thermal management.展开更多
In this work, the Styrene-butadiene rubber (SBR)/lead oxide and the Styrene-butadiene rubber (SBR)/lead nitrate composites were prepared as gamma-radiation shielding materials. The investigated materials were prepared...In this work, the Styrene-butadiene rubber (SBR)/lead oxide and the Styrene-butadiene rubber (SBR)/lead nitrate composites were prepared as gamma-radiation shielding materials. The investigated materials were prepared with three different weight percentage of lead oxide and lead nitrate (30, 50 and 70 wt%). The mass attenuation coefficients (μ<sub>m</sub>) for all composite samples were measured experimentally at 511 and 661.6 keV photon energies. The measurements were made by performing transmission experiments with a 3'' × 3'' NaI (Tl) scintillation detector, which had an energy resolution of 7% at 0.662 MeV for the gamma-rays from the decay of <sup>137</sup>Cs. The effective atomic numbers (Z<sub>eff</sub>) and the effective electron densities (N<sub>eff</sub>) were determined experimentally. Also they were determined theoretically using the obtained μ<sub>m</sub> values for the studied composites samples by WinXCom program. The obtained results show that the experimental values of the composites are found to be in a good agreement with the theoretical values. It is recognized that the mass attenuation coefficient (μ<sub>m</sub>), effective atomic numbers (Z<sub>eff</sub>) and the effective electron densities (N<sub>eff</sub>) are increased in the composite samples which contain lead oxides than which contain lead nitrates. Finally, the Styrene-butadiene rubber (SBR)/lead oxide is better than Styrene-butadiene rubber (SBR)/lead nitrate polymer as gamma radiation shielding.展开更多
An intergeneric artificial hybridization was conducted between Cunninghamia R. Br. and Cryptomeria D.Don The results are as follows:1. A considerable number of hybrid seeds shed from 76 pollinated cones were ...An intergeneric artificial hybridization was conducted between Cunninghamia R. Br. and Cryptomeria D.Don The results are as follows:1. A considerable number of hybrid seeds shed from 76 pollinated cones were empty and a total of 628 looks plump. Soft X ray radiographs showed that, still and all, a majority of the “plump" seeds were embryoless (597, 95.6%) whereas some were partially developed (17,2.7%) and only a few were really full (14, 2.2%). 2. Germination test showed that all of the radiographed hybrid seeds with fully developed embryos were germinable whereas those with partially developed embryos were ungerminable. 3. Physiologically, the growth rate of hypocotyl, the date for shedding of seed coat and spreading of cotyledons, the elongation of epicotyl, and the branching of shoot of the 11 month old seedlings showed a tendency to fall behind those of the female parent; morphologically, the 11 month old hybrid seedlings with linear leaves appeared rather short, slender and weak, whereas the seedlings of the female parents with linear_lanceolate leaves appeared rather tall, stout and strong. 4. It is considered that the hybrid may be true and the crossability reveals a close phylogenetic affinity of Cunninghamia with Cryptomeria.展开更多
Interfacial bonding in as deposited and annealed Co/C soft X ray multilayer structures is investigated by X ray photo electron spectroscopy (XPS).It is found that there is interdiffusion between cobalt and carbon ...Interfacial bonding in as deposited and annealed Co/C soft X ray multilayer structures is investigated by X ray photo electron spectroscopy (XPS).It is found that there is interdiffusion between cobalt and carbon in the as deposited Co/C multilayers,and this is confirmed by structure characterization using low angle X ray diffraction (LAXD).The calculation of the chemical shifts in Co C system based on Miedemas macroscopic atom model suggests that it is impossible to detect the chemical shift experimentally in the Co C compound,which is consistent with the XPS results.The presence of metallic carbide bonding is evidenced through the nature of the carbon bonding in survey taken at Co C and C Co interfaces of annealed samples.Our results also indicate that XPS is a direct method to probe the chemical bonding at the interfaces.展开更多
A new method of calculating finely the soft X ray spectra of hydrogenlike highly ionized states is presented. It is based on the relation of the ionicity and the ionization energies of hydrogenlike atoms and the new...A new method of calculating finely the soft X ray spectra of hydrogenlike highly ionized states is presented. It is based on the relation of the ionicity and the ionization energies of hydrogenlike atoms and the new model of potential function of hydrogenlike atoms. The relativistic revision and the spin orbit couping of excitation energy levels are taken into account. The calculated results are in good agreement with the experiments.展开更多
Five perovskite ceramics samples of Ba_(1-x)Er_(x)SnO_(3) with x=0.00,0.05,0.10,0.15,and 0.20 were synthesized using the conventional solid-state reaction method.The prepared samples were characterized by X-ray diffra...Five perovskite ceramics samples of Ba_(1-x)Er_(x)SnO_(3) with x=0.00,0.05,0.10,0.15,and 0.20 were synthesized using the conventional solid-state reaction method.The prepared samples were characterized by X-ray diffraction(XRD),Fourier transforms infrared(FTIR),and UV-Vis spectroscopy.The shielding properties against ionizing radiation were also investigated.The XRD analysis shows the perovskite cubic structure as the major phase in all samples.The FTIR reveals a distinctive band around 614-620 cm^(-1) ascribed to the antisymmetric O-Sn-O vibration.UV-Vis spectroscopy was used to determine the bandgap according to diffuse reflectance,and the results display a fixed enhancement in the bandgap from 3.2 to 3.3 eV for all samples.Gamma-ray shielding properties of the synthesized samples were experimentally measured and compared with XCOM computational results.The relative differences(Δ,%)between experimental and theo retical values are low and fall within the 0.446%-7.10%range.The addition of Er leads to the enhanced density,neutron,and gamma shielding features.In contrast,charged particles’shielding parameters gradually reduce with rising Er contents.These results suggest that Ba_(1-x)Er_(x)SnO_(3) samples can be used in different radiation shielding applications.展开更多
The recycled cathode ray tube(CRT)funnel glass was used as replacement of magnetite sand in the concrete,and its mass replacement rates were 0,20%,40%and 60%,respectively.The flowability,apparent density and mechanica...The recycled cathode ray tube(CRT)funnel glass was used as replacement of magnetite sand in the concrete,and its mass replacement rates were 0,20%,40%and 60%,respectively.The flowability,apparent density and mechanical properties of the radiation shielding concrete were investigated,while itsγ-ray radiation shielding parameters such as linear and mass attenuation coefficients(μandμm,respectively),thickness values of half-value layer(hHVL)and tenth-value layer(hTVL)were obtained by theoretical calculation,experiment and Monte.Carlo N-Particle(MCNP)simulation code.The experimental results show that the flowability of the concrete increases significantly,whilst its apparent density,compressive strength and static elastic modulus decrease slightly.The calculated,simulated and experimentalμm,μ,hHVL and hTVL values of all concrete samples are very consistent at the sameγ-ray photon energy,and it is feasible to use MCNP code to simulateγ-ray radiation shielding parameters of materials.The calculated results show that in a wide range ofγ-ray photon energy,theμm value of the concrete with CRT funnel glass replacing magnetite sand is improved effectively,and its radiation shielding performances are the same as those of the control concrete(M.1).By comprehensively comparing the flowability,mechanical properties andγ-ray radiation shielding properties,the concrete samples with 20%.40%funnel glass as fine aggregate have good performances.展开更多
基金supported by the CAS Project for Young Scientists in Basic Research(YSBR-096)the National Major Scientific Instruments and Equipment Development Project of China(No.11627901)+1 种基金the National Key Research and Development Program of China(Nos.2021YFF0701202,2021YFA1600703)the National Natural Science Foundation of China(Nos.U1932205,12275343).
文摘The fast X-ray imaging beamline(BL16U2)at Shanghai Synchrotron Radiation Facility(SSRF)is a new beamline that provides X-ray micro-imaging capabilities across a wide range of time scales,spanning from 100 ps toμs and ms.This beamline has been specifically designed to facilitate the investigation of a wide range of rapid phenomena,such as the deformation and failure of materials subjected to intense dynamic loads.In addition,it enables the study of high-pressure and high-speed fuel spray processes in automotive engines.The light source of this beamline is a cryogenic permanent magnet undulator(CPMU)that is cooled by liquid nitrogen.This CPMU can generate X-ray photons within an energy range of 8.7-30 keV.The beamline offers two modes of operation:monochromatic beam mode with a liquid nitrogen-cooled double-crystal monochromator(DCM)and pink beam mode with the first crystal of the DCM out of the beam path.Four X-ray imaging methods were implemented in BL16U2:single-pulse ultrafast X-ray imaging,microsecond-resolved X-ray dynamic imaging,millisecond-resolved X-ray dynamic micro-CT,and high-resolution quantitative micro-CT.Furthermore,BL16U2 is equipped with various in situ impact loading systems,such as a split Hopkinson bar system,light gas gun,and fuel spray chamber.Following the completion of the final commissioning in 2021 and subsequent trial operations in 2022,the beamline has been officially available to users from 2023.
文摘Background and Aims While chest X-ray (CXR) has been a conventional tool in intensive care units (ICUs) to identify lung pathologies, computed tomography (CT) scan remains the gold standard. Use of lung ultrasound (LUS) in resource-rich ICUs is still under investigation. The present study compares the utility of LUS to that of CXR in identifying pulmonary edema and pleural effusion in ICU patients. In addition, consolidation and pneumothorax were analyzed as secondary outcome measures. Material and Methods This is a prospective, single centric, observational study. Patients admitted in ICU were examined for lung pathologies, using LUS by a trained intensivist;and CXR done within 4 hours of each other. The final diagnosis was ascertained by an independent senior radiologist, based on the complete medical chart including clinical findings and the results of thoracic CT, if available. The results were compared and analyzed. Results Sensitivity, specificity and diagnostic accuracy of LUS was 95%, 94.4%, 94.67% for pleural effusion;and 98.33%, 97.78%, 98.00% for pulmonary edema respectively. Corresponding values with CXR were 48.33%, 76.67%, 65.33% for pleural effusion;and 36.67%, 82.22% and 64.00% for pulmonary edema respectively. Sensitivity, specificity and diagnostic accuracy of LUS was 91.30%, 96.85%, 96.00% for consolidation;and 100.00%, 79.02%, 80.00% for pneumothorax respectively. Corresponding values with CXR were 60.87%, 81.10%, 78.00% for consolidation;and 71.3%, 97.20%, 96.00% for pneumothorax respectively. Conclusion LUS has better diagnostic accuracy in diagnosis of pleural effusion and pulmonary edema when compared with CXR and is thus recommended as an effective alternative for diagnosis of these conditions in acute care settings. Our study recommends that a thoracic CT scan can be avoided in most of such cases.
基金Our profound gratitude and appreciation go to the Egyptian and Japanese governments for supporting and financing this research work at the Egypt-Japan University of Science and TechnologyFurther appreciation goes to the Science and Technology Development Fund for the additional financial support(project ID:STDF-33397).
文摘Gamma ray shielding is essential to ensure the safety of personnel and equipment in facilities and environments where radiation exists.The Monte Carlo technique is vital for analyzing the gamma-ray shielding capabilities of materials.In this study,a simple Monte Carlo code,EJUSTCO,is developed to cd simulate gamma radiation transport in shielding materials for academic purposes.The code considers the photoelectric effect,Compton(incoherent)scattering,pair production,and photon annihilation as the dominant interaction mechanisms in the gamma radiation shielding problem.Variance reduction techniques,such as the Russian roulette,survival weighting,and exponential transformation,are incorporated into the code to improve computational efficiency.Predicting the exponential transformation parameter typically requires trial and error as well as expertise.Herein,a deep learning neural network is proposed as a viable method for predicting this parameter for the first time.The model achieves an MSE of 0.00076752 and an R-value of 0.99998.The exposure buildup factors and radiation dose rates due to the passage of gamma radiation with different source energies and varying thicknesses of lead,water,iron,concrete,and aluminum in single-,double-,and triple-layer material systems are validated by comparing the results with those of MCNP,ESG,ANS-6.4.3,MCBLD,MONTEREY MARK(M),PENELOPE,and experiments.Average errors of 5.6%,2.75%,and 10%are achieved for the exposure buildup factor in single-,double-,and triple-layer materials,respectively.A significant parameter that is not considered in similar studies is the gamma ray albedo.In the EJUSTCO code,the total number and energy albedos have been computed.The results are compared with those of MCNP,FOTELP,and PENELOPE.In general,the EJUSTCO-developed code can be employed to assess the performance of radiation shielding materials because the validation results are consistent with theoretical,experimental,and literary results.
基金The authors are grateful for the support of and funding from the Foundation of National Natural Science Foundation of China(51903145 and 51973173)the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province of China(2019JC-11)+1 种基金Fundamental Research Funds for the Central Universities(D5000210627)L.Wang is grateful to the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX202053).
文摘Electromagnetic interference(EMI)shielding materials with excellent flexibility and mechanical properties and outstanding thermal conductivity have become a hot topic of research in functional composites.In this study,the“sol-gel-film conversion technique”is used to assemble polyetherimidefunctionalized Ti_(3)C_(2)T_(x) nanosheets(f-Ti_(3)C_(2)T_(x))with poly(p-phenylene-2,6-benzobisoxazole)(PBO)nanofibers(PNFs),followed by dialysis and vacuum drying to prepare f-Ti_(3)C_(2)T_(x)/PNF films with lamellar structures.When the loading of f-Ti_(3)C_(2)T_(x) is 70 wt%,the f-Ti_(3)C_(2)T_(x)/PNF film presents optimal comprehensive properties,with an EMI shielding effectiveness(SE)of 35 dB and a specific SE/thickness((SSE,SE/density)/t)of 8211 dB cm^(2)/g,a tensile strength of 125.1 MPa,an in-plane thermal conductivity coefficient(λ)of 5.82 W/(m K),and electrical conductivity of 1943 S/m.After repeated folding for 10,000 cycles,the EMI SE and the tensile strength of f-Ti_(3)C_(2)T_(x)/PNFs films still remain 33.4 dB and 116.1 MPa,respectively.Additionally,the f-Ti_(3)C_(2)T_(x)/PNF film also shows excellent thermal stability,flame retardancy,and structural stability.This would provide a novel method for the design and fabrication of multifunctional composite films and considerably expand the applications of MXene-and PNF-based composites in the fields of EMI shielding and thermal management.
文摘In this work, the Styrene-butadiene rubber (SBR)/lead oxide and the Styrene-butadiene rubber (SBR)/lead nitrate composites were prepared as gamma-radiation shielding materials. The investigated materials were prepared with three different weight percentage of lead oxide and lead nitrate (30, 50 and 70 wt%). The mass attenuation coefficients (μ<sub>m</sub>) for all composite samples were measured experimentally at 511 and 661.6 keV photon energies. The measurements were made by performing transmission experiments with a 3'' × 3'' NaI (Tl) scintillation detector, which had an energy resolution of 7% at 0.662 MeV for the gamma-rays from the decay of <sup>137</sup>Cs. The effective atomic numbers (Z<sub>eff</sub>) and the effective electron densities (N<sub>eff</sub>) were determined experimentally. Also they were determined theoretically using the obtained μ<sub>m</sub> values for the studied composites samples by WinXCom program. The obtained results show that the experimental values of the composites are found to be in a good agreement with the theoretical values. It is recognized that the mass attenuation coefficient (μ<sub>m</sub>), effective atomic numbers (Z<sub>eff</sub>) and the effective electron densities (N<sub>eff</sub>) are increased in the composite samples which contain lead oxides than which contain lead nitrates. Finally, the Styrene-butadiene rubber (SBR)/lead oxide is better than Styrene-butadiene rubber (SBR)/lead nitrate polymer as gamma radiation shielding.
文摘An intergeneric artificial hybridization was conducted between Cunninghamia R. Br. and Cryptomeria D.Don The results are as follows:1. A considerable number of hybrid seeds shed from 76 pollinated cones were empty and a total of 628 looks plump. Soft X ray radiographs showed that, still and all, a majority of the “plump" seeds were embryoless (597, 95.6%) whereas some were partially developed (17,2.7%) and only a few were really full (14, 2.2%). 2. Germination test showed that all of the radiographed hybrid seeds with fully developed embryos were germinable whereas those with partially developed embryos were ungerminable. 3. Physiologically, the growth rate of hypocotyl, the date for shedding of seed coat and spreading of cotyledons, the elongation of epicotyl, and the branching of shoot of the 11 month old seedlings showed a tendency to fall behind those of the female parent; morphologically, the 11 month old hybrid seedlings with linear leaves appeared rather short, slender and weak, whereas the seedlings of the female parents with linear_lanceolate leaves appeared rather tall, stout and strong. 4. It is considered that the hybrid may be true and the crossability reveals a close phylogenetic affinity of Cunninghamia with Cryptomeria.
文摘Interfacial bonding in as deposited and annealed Co/C soft X ray multilayer structures is investigated by X ray photo electron spectroscopy (XPS).It is found that there is interdiffusion between cobalt and carbon in the as deposited Co/C multilayers,and this is confirmed by structure characterization using low angle X ray diffraction (LAXD).The calculation of the chemical shifts in Co C system based on Miedemas macroscopic atom model suggests that it is impossible to detect the chemical shift experimentally in the Co C compound,which is consistent with the XPS results.The presence of metallic carbide bonding is evidenced through the nature of the carbon bonding in survey taken at Co C and C Co interfaces of annealed samples.Our results also indicate that XPS is a direct method to probe the chemical bonding at the interfaces.
文摘A new method of calculating finely the soft X ray spectra of hydrogenlike highly ionized states is presented. It is based on the relation of the ionicity and the ionization energies of hydrogenlike atoms and the new model of potential function of hydrogenlike atoms. The relativistic revision and the spin orbit couping of excitation energy levels are taken into account. The calculated results are in good agreement with the experiments.
基金Funding support from the Deanship of Scientific Research at King Fahd University of Petroleum&Minerals(KFUPM),Saudi Arabia(DF201008)。
文摘Five perovskite ceramics samples of Ba_(1-x)Er_(x)SnO_(3) with x=0.00,0.05,0.10,0.15,and 0.20 were synthesized using the conventional solid-state reaction method.The prepared samples were characterized by X-ray diffraction(XRD),Fourier transforms infrared(FTIR),and UV-Vis spectroscopy.The shielding properties against ionizing radiation were also investigated.The XRD analysis shows the perovskite cubic structure as the major phase in all samples.The FTIR reveals a distinctive band around 614-620 cm^(-1) ascribed to the antisymmetric O-Sn-O vibration.UV-Vis spectroscopy was used to determine the bandgap according to diffuse reflectance,and the results display a fixed enhancement in the bandgap from 3.2 to 3.3 eV for all samples.Gamma-ray shielding properties of the synthesized samples were experimentally measured and compared with XCOM computational results.The relative differences(Δ,%)between experimental and theo retical values are low and fall within the 0.446%-7.10%range.The addition of Er leads to the enhanced density,neutron,and gamma shielding features.In contrast,charged particles’shielding parameters gradually reduce with rising Er contents.These results suggest that Ba_(1-x)Er_(x)SnO_(3) samples can be used in different radiation shielding applications.
基金Project(14JJ2083)supported by the Natural Science Foundation of Hunan Province,ChinaProject(2015JC3090)supported by the Science and Technology Department of Hunan Province,China
文摘The recycled cathode ray tube(CRT)funnel glass was used as replacement of magnetite sand in the concrete,and its mass replacement rates were 0,20%,40%and 60%,respectively.The flowability,apparent density and mechanical properties of the radiation shielding concrete were investigated,while itsγ-ray radiation shielding parameters such as linear and mass attenuation coefficients(μandμm,respectively),thickness values of half-value layer(hHVL)and tenth-value layer(hTVL)were obtained by theoretical calculation,experiment and Monte.Carlo N-Particle(MCNP)simulation code.The experimental results show that the flowability of the concrete increases significantly,whilst its apparent density,compressive strength and static elastic modulus decrease slightly.The calculated,simulated and experimentalμm,μ,hHVL and hTVL values of all concrete samples are very consistent at the sameγ-ray photon energy,and it is feasible to use MCNP code to simulateγ-ray radiation shielding parameters of materials.The calculated results show that in a wide range ofγ-ray photon energy,theμm value of the concrete with CRT funnel glass replacing magnetite sand is improved effectively,and its radiation shielding performances are the same as those of the control concrete(M.1).By comprehensively comparing the flowability,mechanical properties andγ-ray radiation shielding properties,the concrete samples with 20%.40%funnel glass as fine aggregate have good performances.
