Energy-dispersive X-ray Spectroscopy for the Quantitative Analysis of Pyrite Thin Specimens

To explore ways to improve the accuracy of quantitative analysis of samples in the micrometer to nanometer range of magnitudes,we adopted analytical transmission electron microscopy(AEM/EDS)for qualitative and quantitative analysis of pyrite materials.Additionally,the k factor of pyrite is calculated experimentally.To develop an appropriate non-standard quantitative analysis model for pyrite materials,the experimentally calculated k factor is compared with that estimated from the non-standard quantitative analytical model of the instrument software.The experimental findings demonstrate that the EDS attached to a TEM can be employed for precise quantitative analysis of micro-and nanoscale regions of pyrite materials.Furthermore,it serves as a reference for improving the results of the EDS quantitative analysis of other sulfides.

Photoelectric characteristics of silicon P–N junction with nanopillar texture:Analysis of X-ray photoelectron spectroscopy

Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface are subjected to phosphorus （P） diffusion by liquid dopant source （POCl3） at 870 ℃ to form P-N junctions with a depth of 300 nm. The X-ray photoelectron spectroscopy （XPS） is used to measure the Si 2p core levels of P-N junction wafer with nanopillar texture and planar surface. With a visible light excitation, the P-N junction produces a new electric potential for photoelectric characteristic, which causes the Si 2p core level to have a energy shift compared with the spectrum without the visible light. The energy shift of the Si 2p core level is -0.27 eV for the planar P-N junction and -0.18 eV for the nanopillar one. The difference in Si 2p energy shift is due to more space lattice defects and chemical bond breaks for nanopillar compared with the planar one.

Theoretical characterization of the adsorption configuration of pyrrole on Si(100)surface by x-ray spectroscopy

The possible configurations of pyrrole absorbed on a Si(100)surface have been investigated by x-ray photoelectron spectroscopy(XPS)and near-edge x-ray absorption fine structure(NEXAFS)spectra.The C-1s XPS and NEXAFS spectra of these adsorption configurations have been calculated by using the density functional theory(DFT)method and fullcore hole(FCH)approximation to investigate the relationship between the adsorption configurations and the spectra.The result shows that the XPS and NEXAFS spectra are structurally dependent on the configurations of pyrrole absorbed on the Si(100)surface.Compared with the XPS,the NEXAFS spectra are relatively sensitive to the adsorption configurations and can accurately identify them.The NEXAFS decomposition spectra produced by non-equivalent carbon atoms have also been calculated and show that the spectral features vary with the diverse types of carbon atoms and their structural environments.

Elemental and proximate analysis of coal by x-ray fluorescence assisted laser-induced breakdown spectroscopy

Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in thermal power plants,the measurement repeatability of LIBS needs to be further improved due to the difficulty in controlling the stability of the generated plasmas at present.In this paper,we propose a novel x-ray fluorescence(XRF) assisted LIBS method for high repeatability analysis of coal quality,which not only inherits the ability of LIBS to directly analyze organic elements such as C and H in coal,but also uses XRF to make up for the lack of stability of LIBS in determining other inorganic ash-forming elements.With the combination of elemental lines in LIBS and XRF spectra,the principal component analysis and the partial least squares are used to establish the prediction model and perform multi-elemental and proximate analysis of coal.Quantitative analysis results show that the relative standard deviation(RSD) of C is 0.15%,the RSDs of other elements are less than 4%,and the standard deviations of calorific value,ash content,sulfur content and volatile matter are 0.11 MJ kg,0.17%,0.79% and 0.41%respectively,indicating that the method has good repeatability in determination of coal quality.This work is helpful to accelerate the development of LIBS in the field of rapid measurement of coal entering the power plant and on-line monitoring of coal entering the furnace.

Structure and Bonding in Some Gd(Ⅲ) Metal Complexes Studied by Three-Dimensional X-Ray Analysis and ^(155)Gd Mssbauer Spectroscopy

Some functional lanthanide metal complexes, such as acetylacetonato complexes, ethylenediaminetetraacetato complexes, were successfully applied for diagnostic technique. The authors are interested in investigating the structure and bonding in lanthanide and actinide metal complexes using 166Er, t55Gd, and 237Np Mtissbauer spectroscopies in connection with single-crystal and/or powder X-ray diffraction, making clear the differences on their structures as well as the differences in the participation of 4f and 5f orbitals in the chemical bonds. In this article, the crystal structures of two novel Gd（Ⅲ） acetylacetonato complexes, Gd（pta）3 · 2H2O （pta = 1,1,1 -trifluoro-5,5-dimethy 1-2,4-hexanedione） and Gd（bfa）3 · 2H2O （bfa = 1, 1, 1 -trifluoro-4-phenyl-2-4-butanedione） were reported. Though both of them were dihydrate and had distorted square antiprismatical structure, Gd（pta）3 · 2H2O crystallizes in the P 2 1/n （#14） monoclinic space group and its lattice parameters are a = 1.4141（6） nm, b = 1.0708（3） nm, c =2.2344（4） nm, β =952.4（2）°, and Gd（bfa）3· 2H2O crystallizes in P 212121 orthorhombic space group and its lattice parameters were a = 1.322 （1） nm, b = 2.295 （1） nm, c = 1. 0786（8） nm. In the meantime, the authors had finished a systematic investigation on the ^155Gd Mossbauer isomer shift （δ） of various Gd（Ⅲ） metal complexes having a different coordination number （C.N.） and different ratios coordinating oxygen to nitrogen. A tendency for the 6 value to decrease with an increase in the C.N, and the number of the nitrogen atom coordinating to Gd was confirmed. This indicated that the Gd-O and/or Gd-N bond in the investigated Gd（Ⅲ） metal complexes had a small covalent contribution, which was possible to be deduced from the O and/or N atoms of the lisands donating electrons to 6s, 5d, and 4f orbitals of Gd.

Local Structure Analysis of Lead Zinc Niobate-Barium Titanate Ceramic by X-Ray Absorption Spectroscopy and Density Functional Calculation

The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.

Understanding fundamentals of electrochemical reactions with tender X-rays:A new lab-based operando X-ray photoelectron spectroscopy method for probing liquid/solid and gas/solid interfaces across a variety of electrochemical systems

Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.

X-ray absorption near the edge structure and x-ray photoelectron spectroscopy studies on pyrite prepared by thermally sulfurizing iron films

This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a 4B9B beam line at the Beijing Synchrotron Radiation Facility. The band gap of the pyrite agrees well with the optical band gap obtained by a spectrophotometer. The octahedral symmetry of pyrite leads to the splitting of the d orbit into t2g and eg levels. The high spin and low spin states were analysed through the difference of electron exchange interaction and the orbital crystal field. Only when the crystal field splitting is higher than 1.5 eV, the two weak peaks above the white lines can appear, and this was approved by experiments in the present work.

X-ray Photoelectron Spectroscopy Studies of Ti_(x)Al_(1-x)N Thin Films Prepared by RF Reactive Magnetron Sputtering

TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray photoelectron spectrocopy studies provided that the Nls core-electron spectrum of TixAl1-xN thin film brodend with increasing Ti content, and the difference of the chemical shifts for Ti2p3/2 line between TiN and TixAl1-xN th77pj in film was 0.7 eV.

Molecular structure characterization of middle-high rank coal via^(13)C NMR,XPS,and FTIR spectroscopy

Elemental analysis,nuclear magnetic resonance carbon spectroscopy(^(13)C-NMR),X-ray photoelectron spectroscopy(XPS)and Fourier transform infrared spectroscopy(FTIR)experiments were carried out to determine the existence of aromatic structure,heteroatom structure and fat structure in coal.MS(materials studio)software was used to optimize and construct a 3D molecular structure model of coal.A method for establishing a coal molecular structure model was formed,which was“determination of key structures in coal,construction of planar molecular structure model,and optimization of three-dimensional molecular structure model”.The structural differences were compared and analyzed.The results show that with the increase of coal rank,the dehydrogenation of cycloalkanes in coal is continuously enhanced,and the content of heteroatoms in the aromatic ring decreases.The heteroatoms and branch chains in the coal are reduced,and the structure is more orderly and tight.The stability of the structure is determined by theπ-πinteraction between the aromatic rings in the nonbonding energy EN.Key Stretching Energy The size of EB determines how tight the structure is.The research results provide a method and reference for the study of the molecular structure of medium and high coal ranks.

Energy band alignment at Cu2O/ZnO heterojunctions characterized by in situ x-ray photoelectron spectroscopy

With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heterojunction is fabricated on a c-Al2 O3 substrate by laser-molecular beam epitaxy,and the energy band alignment is determined by x-ray photoelectron spectroscopy.The valence band of ZnO is found to be 1.97 eV below that of Cu2O.A type-II band alignment exists at the Cu2O/ZnO heterojunction with a resulting conduction band offset of 0.77 eV,which is especially favorable for enhancing the efficiency of Cu2O/ZnO solar cells.

Study on NiO/Fe interface with X-ray photoelectron spectroscopy

Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic properties and microstructure of the films were studied. The apparent magnetic dead layer （MDL） is found to exist at the NiO/Fe interfaces of the MBE sample （about 2 ML MDL）, the PLD sample （about 3 ML MDL）, and the MS sample （about 4 ML MDL）. X-ray photoelectron spectroscopy indicates the presence of ionic Fe （Fe2＋ or Fe3＋） and metallic Ni at the NiO/Fe interfaces, which may be due to the chemical reactions between Fe and NiO layers. This also leads to the formation of MDL. The thickness of the MDL and the reaction products are related with the deposition energy of the atoms on the substrates. The interfacial reactions are effectively suppressed by inserting a thin Pt layer at the NiO/Fe interface.

Landscape of s-triazine molecule on Si(100) by a theoretical x-ray photoelectron spectroscopy and x-ray absorption near-edge structure spectra study

The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy（XPS） and the x-ray absorption near-edge structure（XANES） spectra of the interfacial structure of an s-triazine molecule adsorbed on Si（100） surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si（100） surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.

Pressure-dependent band-bending in ZnO:A near-ambient-pressure X-ray photoelectron spectroscopy study

ZnO-based catalysts have been intensively studied because of their extraordinary performance in lower olefin synthesis,methanol synthesis and water-gas shift reactions.However,how ZnO catalyzes these reactions are still not well understood.Herein,we investigate the activations of CO_(2),O_(2)and CO on single crystalline ZnO polar surfaces at room temperature,through in-situ near-ambient-pressure X-ray photoelectron spectroscopy(NAP-XPS).It is revealed that O_(2)and CO_(2)can undergo chemisorption on ZnO polar surfaces at elevated pressures.On the ZnO(0001)surface,molecular CO_(2)(O_(2))can chemically interact with the top layer Zn atoms,leading to the formation of CO_(2)^(δ-)(O_(2)^(δ-))or partially dissociative atomic oxygen(O-)and hence the electron depletion layer in ZnO.Therefore,an apparent upward band-bending in ZnO(0001)is observed under the CO_(2)and O_(2)exposure.On the ZnO(0001)surface,the molecular chemisorbed CO_(2)(O_(2))mainly bond to the surface oxygen vacancies,which also results in an upward bandbending in ZnO(0001).In contrast,no band-bending is observed for both ZnO polar surfaces upon CO exposure.The electron-acceptor nature of the surface bounded molecules/atoms is responsible for the reversible binding energy shift of Zn 2 p_(3/2)and O 1 s in ZnO.Our findings can shed light on the fundamental understandings of CO_(2)and O_(2)activation on ZnO surfaces,especially the role of ZnO in heterogeneous catalytic reactions.

Band alignment of p-type oxide/ε-Ga2O3 heterojunctions investigated by x-ray photoelectron spectroscopy

Theε-Ga2O3 p-n heterojunctions(HJ)have been demonstrated using typical p-type oxide semiconductors(NiO or SnO).Theε-Ga2O3 thin film was heteroepitaxial grown by metal organic chemical vapor deposition(MOCVD)with three-step growth method.The polycrystalline SnO and NiO thin films were deposited on theε-Ga2O3 thin film by electron-beam evaporation and thermal oxidation,respectively.The valence band offsets(VBO)were determined by x-ray photoelectron spectroscopy(XPS)to be 2.17 eV at SnO/ε-Ga2O3 and 1.7 eV at NiO/ε-Ga2O3.Considering the bandgaps determined by ultraviolet-visible spectroscopy,the conduction band offsets(CBO)of 0.11 eV at SnO/ε-Ga2O3 and 0.44 eV at NiO/ε-Ga2O3 were obtained.The type-Ⅱband diagrams have been drawn for both p-n HJs.The results are useful to understand the electronic structures at theε-Ga2O3 p-n HJ interface,and design optoelectronic devices based onε-Ga2O3 with novel functionality and improved performance.

Structure Analysis of Needle-like Copper Tantalum Trisulfide Crystals by XPS and Raman Spectroscopy

High-quality needle-like CuTaS3 single crystals have been synthesized through a chemical vapor transport（CVT） process.Crystallographic data show the special double chains of edge-sharing TaS6 octahedra.The detailed XPS analysis of CuTaS3 was undertaken and the valence states can be described by Cu＋Ta5＋3S2-.In addition,CuTaS3 crystals were characterized with Raman spectroscopy.

History of the Establishment and Development of X-Ray Analysis Methods in Russia--The USSR. First 20 Years

2012 is a year of celebrate centenary of X-ray discovery information about Laue＇s （Fridrich and Knipping） experiment was This discovery spread quickly in different countries. The history of written in the paper. Also history mention of Laue＇s experiment in Russia was presented. The system group of X-ray diffraction was created in 1919/1920 in Petrograd （A. Ioffe, State Physical Technical Institute） and Moscow. Themes of research results, scientific newness and scientific rate were presented. The organization, political and other reasons which retarded the active progress of the method in 1930 were described. Initial stage of progress of the method in Russia-USSR was studied by historian of science partly. The reasons of it are： closed of scientific community, political system of country, Cyrillic barrier, etc.. This paper acquaints western scientific community with non-famous Russian materials on theme.

XPS Analysis of the Cerium Conversion Coating on the Anodized A16061/SiC_p

A method of concentration analysis based on X-ray photoelectron spectroscopy (XPS) results was introduced. The concentration of Ce-rich conversion coating on the anodized Al based metal matrix composites AI6061/SiCp was then studied according to this method. The results revealed that the Ce conversion coating on the anodized AI6061/SiCp consisted of Al oxide, Ce oxide and Ce hydroxide. The state of Ce element exhibited the mixture of Ce3+ and Ce4+. Some of Cell I was oxidized to be CelV in the outer layer coating.

Energy band alignment at ferroelectric/electrode interface determined by photoelectron spectroscopy

The most important interface-related quantities determined by band alignment are the barrier heights for charge trans- port, given by the Fermi level position at the interface. Taking Pb（Zr, Ti）O3 （PZT） as a typical ferroelectric material and applying X-ray photoelectron spectroscopy （XPS）, we briefly review the interface formation and barrier heights at the inter- faces between PZT and electrodes made of various metals or conductive oxides. Polarization dependence of the Schottky barrier height at a ferroelectric/electrode interface is also directly observed using XPS.

Unraveling the evolution of Cathode-Solid electrolyte interface using operando X-ray Photoelectron spectroscopy

Understanding the evolution of the solid electrolyte-electrode interface is currently one of the most challenging obstacles in the development of solid-state batteries(SSBs).Here,we develop an X-ray Photoelectron Spectroscopy(XPS)that allows for operando measurement during cycling.Based on theoretical analysis and the modulated electrode and detector co-grounding mode,the displacement of binding energy can be correlated with the surface electrostatic potential of the material,revealing the charge distribution and composition evolution of the space charge layer between the cathode and the electrolyte.In the investigation of typical LiCoO_(2)(LCO)/Li6PS5Cl(LPSC)/Li-In batteries,we observed the static potential difference and oxidative decomposition between LPSC and LCO,and the effectiveness of the LiNbO3 coating in reducing potential difference and inhibiting the diffusion of Co and oxidation of S species.Furthermore,our study also revealed that the potential drop between LiNi0⋅8Co0⋅1Mn0⋅1O_(2) and LPSC is smaller than that of LCO,whilst that between Li3InCl6 and LCO remains near zero.The proposed operando XPS method offers a novel approach for real-time monitoring of interface potential and species formation,providing rational guidance for the interface engineering in SSBs.