Slip rate and interseismic coupling along the Moxi-Shimian segment of the Xianshuihe fault, Eastern Qinghai-Xizang Plateau

On September 5,2022,the Luding M6.8 earthquake occurred in the Moxi-Shimian segment of the Xianshuihe fault,coinciding with the historical ruptured zone of the 1786 Moxi earthquake.Its seis-mogenic environment provides a foundation for comprehending the mechanism of the earthquake and its future hazard.In the Moxi-Shimian segment,we establish a series of near-field Global Navigation Satellite Systems(GNsS)stations to enhance the spatial resolution of observational data for the inversion of the interseismic kinematic parameters.In this study,with an elastic screw dislocation model con-strained by GNsS observations,the slip rate of the Moxi-Shimian segment is estimated to be 10.9±1.0 mm/yr,while the locking depth is 15.7±6.2 km.Additionally,we utilize a block-dislocation model to invert the interseismic fault coupling along the Kangding-Moxi-Shimian segment.The result indicates a gradual deepening of the locking depth along the section from Kangding to Shimian.The coseismic rupture of the 2022 event occurred within the high coupling regions in the Kangding-Moxi-Shimian segment,which indicates that the rupture kinematics in this event might be controlled by the interseismic deformation.The seismic moment accumulated within the ruptured zone of the Luding earthquake since 1786 ranges in[1.42-3.40]×10^(19) N-m,which is significantly greater than the seismic moment released during the 2022 event.As a result,we infer that the Luding earthquake released only a portion of the accumulated energy within the original rupture zone since 1786,indicating that the 2022 event has not caused a complete rupture in the Moxi-Shimian segment.Consequently,there remains a substantial seismic hazard in this area.

Interseismic slip distribution and locking characteristics of the mid-southern segment of the Tanlu fault zone

We employ the block negative dislocation model to invert the distribution of fault coupling and slip rate deficit on the different segments of the Tanlu(Tancheng-Lujiang) fault zone, according to the GPS horizontal velocity field from 1991 to 2007(the first phase) and 2013 to 2018(the second phase). By comparing the deformation characteristics results, we discuss the relationship between the deformation characteristics with the M earthquake in Japan. The results showed that the fault coupling rate of the northern section of Tancheng in the second phase reduced compared with that in the first phase. However, the results of the two phases showed that the northern section of Juxian still has a high coupling rate, a deep blocking depth, and a dextral compressive deficit, which is the enrapture section of the 1668 Tancheng earthquake. At the same time, the area strain results show that the strain rate of the central and eastern regions of the second phase is obviously enhanced compared with that of the first phase. The occurrence of the great earthquake in Japan has played a specific role in alleviating the strain accumulation in the middle and south sections of the Tanlu fault zone. The results of the maximum shear strain show that the shear strain in the middle section of the Tanlu fault zone in the second phase is weaker than that in the first phase, and the maximum shear strain in the southern section is stronger than that in the first phase. The fault coupling coefficient of the south Sihong to Jiashan section is high, and it is also the unruptured section of historical earthquakes. At the same time, small earthquakes in this area are not active and accumulate stress easily, so the future earthquake risk deserves attention.

Determining the surface fault-rupture hazard zone for the Pazarcık segment of the East Anatolian fault zone through comprehensive analysis of surface rupture from the February 6,2023,Earthquake(Mw 7.7)

Following surface rupture observations in populated areas affected by the KahramanmaraşEarthquake(Mw 7.7)on February 6th,2023,along the Pazarcık segment of the East Anatolian Fault Zone(EAFZ),this study presents novel insights into physical criteria for delineating surface fault-rupture hazard zones(SRHZs)along ruptured strike-slip faults.To achieve this objective,three trench studies across the surface rupture were conducted on the Pazarcık segment of the EAFZ to collect field data,and earthquake recurrence intervals were interpreted using Bayesian statistics from previously conducted paleoseismological trenchings.The results of the proposed model indicate that the Pazarcık segment produced five significant surface-rupturing earthquakes in the last∼11 kyr:E1:11.13±1.74 kyr,E2:7.62±1.20 kyr,E3:5.34±1.05 kyr,E4:1.82±0.93 kyr,and E5:0.35±0.11 kyr.In addition,the recurrence intervals of destructive earthquakes on the subject in question range from 0.6 kyr to 4.8 kyr.Considering that the last significant earthquake occurred in 1513,the longest time since the most recent surface fault rupturing earthquake on this particular segment was 511 years.These results indicate that,in terms of the theoretical recurrence interval of earthquakes that can create surface ruptures on the Pazarcık segment,the period in which the February 6,2023,earthquake occurred was within the end of the expected return period.As a result,the potential for a devastating earthquake in the near future is not foreseen on the same fault.Finally,the SRHZ proposed for the Pazarcık section of Gölbaşıvillage was calculated as a 61-meter-wide offset on the fault lineament to reduce the negativities that may occur in the ruptured area in the future.It is recommended to take into account this width in the settlement of this area and nearby areas.

Segmentations of active normal dip-slip faults around Ordos block according to their surface ruptures in historical strong earthquakes

From the results of researches of active faults in resent years, a correlation analysis between segments of the faults according to surface ruptures in nine historical strong earthquakes occurring in downfaulted system and active structures around Ordos block is conducted in paper. The result shows that there is a good correlation between them, except few individual data that have more uncertain parameters. It shows that intensity and segments of surface ruptures in these strong earthquakes are intrinsically related with the active structures. These strong earthquakes produced stable and unstable rupture boundaries of characteristic-earthquake type and successive occurrence of strong earthquakes on the different boundary faults in the same tectonic unit.

The First Quantitative Slip-Rate Estimated Along the Ashikule Fault at the Western Segment of the Altyn Tagh Fault System

As one of the longest strike-slip fault in Asia,the Altyn Tagh Fault（ATF）defines the northern boundary of the Tibetan Plateau and plays a significant role inaccommodating the deformation resulting from the IndiaAsia convergence.

Interpretation of the west segment of the coastal fault zone in the coastal region of South China based on the gravity data

By systemic processing, comprehensive analysis, and interpretation of gravity data, we confirmed the existence of the west segment of the coastal fault zone(west of Yangjiang to Beibu Bay) in the coastal region of South China. This showed an apparent high gravity gradient in the NEE direction, and worse linearity and less compactness than that in the Pearl River month. This also revealed a relatively large curvature and a complicated gravity structure. In the finding images processed by the gravity data system, each fault was well reflected and primarily characterized by isolines or thick black stripes with a cutting depth greater than 30 km. Though mutually cut by NW-trending and NE-trending faults, the apparent NEE stripe-shaped structure of the west segment of the coastal fault zone remained unchanged,with good continuity and an activity strength higher than that of NW and NE-trending faults. Moreover,we determined that the west segment of the coastal fault zone is the major seismogenic structure responsible for strong earthquakes in the coastal region in the border area of Guangdong, Guangxi, and Hainan.

Recent Activity of the Badu-Longwei Segment,Guguan-Xiangong Fault in Southern Liupanshan,Constrained by Rhythmic Sediment Lithology and Geomorphic Characteristics

This study＇s objective was to investigate the Guguan-Xiangong Fault, which lies in the southern Liupanshan area, through satellite image interpretation and field observations. Guguan- Xiangong Fault is divided into five subsegments; among these, the Badu-Longwei segment has been the most recently active. The geomorphic features of the Badu-Longwei segment are clearly displayed, including multiple high fault scarps with fresh bedrock free faces. There is significant evidence for Holocene activity of the three fault sections, located in Renhuashu, Tianjiagou, and Xinjiecun respectively. The three sections feature distinct episodic deposition and fault scratches. Based on 14C- dating and field observations on the three fault sections, two or more paleoearthquakes across the Badu-Longwei fault segment are ascertained, between 5874±116 and 5430±140 a BP, and after 2037±83 a BP respectively. The Badu-Longwei segment of the Guguan-Xiangong Fault is preliminarily extrapolated as the seismogenic structure of the 600 A.D. Qin-Long earthquake.

Recent activity of Chihe segment of Tanlu fault zone

By means of differentiation of remote sensing image, field seismo-geological survey, analysis on drilling explora- tion materials, sampling and dating of rock samples, combined with seismicity and microscopic tectonic analysis, this paper studies the recent activity of Chihe segment of the Tanlu fault zone. The result indicates that the Chihe fault segment undergoes the deformation alternately in the mode of stick slip and creep during Late Quaternary, and its recent activity is mainly creep.

Crustal density structure of the southern segment of the Liaocheng-Lankao fault, China

The 1:200,000 middle-large scale Bouguer gravity anomaly data covering the southern segment of the Liaocheng-Lankao fault(SLLF)and its vicinity are analyzed with two methods.First,the Bouguer gravity anomaly data are decomposed by two-dimensional(2 D)wavelet to make the family of multi-scale modes correspond with density structure at different depths.Second,a two and half dimension(2.5 D)human-computer interaction inversion of the Bouguer gravity anomaly data are conducted with the constraints provided by two deep seismic sounding profiles(DSS1 and DSS2)crossing the study area to get the crustal density profiles.Based on the integrated study,we can draw the following conclusions:1)SLLF appears to be a deep fault with almost vertical dipping and rooted into the uppermost mantle;2)In the middle to upper crust SLLF shows an clear turning patterns and segmentation features;3)In the study area the epicentral distributions of the precisely re-located small earthquakes and the historical large earthquakes have a good correspondence with the turning patterns and segmentation features of SLLF;and 4)The results of the horizontal slices from 2 D wavelet decomposition show that there are significant differences in the density structure on the two sides of the fault.A well-defined concave structure with low density exists in the upper crust of the Dongming Depression on the west side of the fault,with the concave center being estimated at a depth of about 8 km.In contrast,the upper crust on the east side presents a relative thinner pattern in depth with a bit higher density.Meanwhile,the low-density structure in the middle crust underneath the fault is presumably caused by the uplift of the upper mantle materials and their intrusion along the deep rupture system.This paper clarified the inconsistency of fault system and epicenters of small earthquakes from upper to lower crust.The results indicated that the fault system plays an important governing role to the seismicity in this area.

Recurrence behaviors of segment-rupturing earthquakes on active faults of the Chinese mainland

To investigate the recurrence behaviors of segment-rupturing eathquakes on active faults of the Chinese mainland, thispaper analyzes quantitatively earthquake history of 19 fault segments based on earthquake dam of multi-cyclerecurrences. The result shows that, for these fault segments, eanhquake recurring at previous locations is mainlycharacterized by both quasi-periodic (in a ratio of about) and time-predictable (in a ratio of about) behaviors.For the first behavior. intrinsic uncertainty of recurrence interval accounts for 0. 15-0.40 of the average interval, andmagnitudes of event vary from cycle to cycle within the range of the mean magnitUde t0.5. For the second behavior,intrinsic uncertainty of recurrence interval ranges mostly from 0. 19 to 0.40 of the average interval, and for successivetwo cycles the maximum change of event magnitudes is as much as 1.7 magnitude-units. In addition, for a few casesthe first behavior coexists along with either the second or the slip-predictable behaviors.

History of Paleoseismic ActivityAlong the Hohhot Segment of Daqingshan Piedmont Fault in the Late Quaternary

A detailed study on geomorphic surfaces and a set of trenches on the Hohhot segment of Daqingshan piedmont fault at three sites, Kuisu, Ulan Blang, and Qingshan Grassland, revealed 7 paleoseismic events occurred along the fault segment since 19 ka BP. Those events occurred at 18.75±.75 ka, 16.97 ±.96 ka, 14.65±.67 ka, 11.82±.69 ka, 9.45±.26 ka, 6. 83±.26 ka, and 4. 50 ±0. 23 ka BP, respectively, and their average recurrence interval is 2375±432 years. From the results of constraining fault displacement and correlation between the sediments in these trenches, we found a complete paleoseismic activity history along the fault segment during this period of time.

An Inhomogeneous Distribution Model of Strong Earthquakes along Strike-Slip Act ive Fault Segments on the Chinese Continent and Its Implication in Engineering Seismology

Through the statistical analysis of earthquake distribution along 51 strike-sli p active fault segments on the Chinese continent, we found that strong earthquak e distribution along the seismogenic fault segments is inhomogeneous and the dis tribution probability density p(K) can be stated as p(K)=1.1206e -3.947K in which K=S/(L/2), S refers to the distance from earthquake epicenter to the center of a fault segment, L is the length of the fault segment. The above model can be utilized to modify the probability density of earthquake occurrence of t he maximum magnitude interval in a potential earthquake source. Nevertheless, it is only suitable for those potential earthquake sources delineated along a sing le seismogenic fault. This inhomogeneous model has certain effects on seismic risk assessment, especia ll y for those potential earthquake sources with higher earthquake reoccurrence rat es of the maximum magnitude interval. In general, higher reoccurrence rate of th e maximum magnitude interval and lower exceeding probability level may bring lar ger difference of the results in seismic risk analysis by adopting the inhomogen eous model, the PGA values increase inner the potential earthquake source, but r educe near the vicinity and out of the potential earthquake source. Taking the T angyin potential earthquake source as an example, with exceeding probability of 10% and 2% in 50 years, the difference of the PGA values between inhomogeneous m odel and homogenous models can reach 12%.

Discussion of the Horizontal Intensity of Late Quaternary Fault Activity Along the Tianjingshan Fault Zone in Different Time Intervals and Fault Segments

By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.

Study of the segmentation of active fault by the boundary element method──analysis of the Xianshuihe fault zone

On the basis of the recent geological surveys and the relevant studies of the Xianshuihe fault zone, this paper analyzes the seismogenic mechanism of some faults and characteristic morphology on the fault zone by the boundary element method and discusses the fault segmentation and the related distribution of the earthquake ruptures. The main conclusions are: For the first order segmentation, the Xianshuihe fault zone can be divided into three major segments (the northwestern Luhuo-Qianning segment, the middle linking fracture region and the southeastern Kangding segment). Among them, the differences are not only in geometry and structure, but also in mechanical property and dynamics. Some of the characteristic morphologies on the Xianshuihe fault zone reflect the effects in cumulative deformation due to long-term fault movement, and reveal the fault segmentation in different orders. Such morphologies control, to some extent, the developments and the distributions of the earthquake ruptures on the fault zone.

Analysis of an Active Fault Geometry Using Satellite Sensor and DEM Data: Gaziköy-Saros Segment (NAFZ), Turkey

In this study, Landsat 5 Thematic Mapper (TM) and SPOT HRV Panchromatic data were analysed to determine the geometry of an active fault segment (the Ganos segment) in Gazikoy-Saros region, west of Marmara Sea, Turkey. Gazikoy-Saros/Ganos segment is a part of North Anatolian Fault Zone (NAFZ). North-Anatolian fault is considered to be one of the most important active strike-slip faults in the world. Thus far in relevant researches based on Gazikoy-Saros segment a single straight fault line representation is used on the fault descriptive geological maps. This study, with the aid of enhanced remotely sensed data aims to reveal the linear details of the NAFZ fault segment, which subsequently were superposed with a Digital Elevation Model (DEM) data. Respectively, using these data the surface geometry expression of Gazikoy-Saros fault segment was detailed and remapped. According to the results of the analysis two small releasing steps were identified on this segment. The first one is situated between Mürseli and Güzelkoy villages, and the second one is between Mürseli and Yorguc villages. In addition to this, it is found that the fault strike bends approximately 7° further to in south-eastern (SE) direction between Yenikoy and Sofular villages. This angular change was defined with the advantage of multi-angular viewing capability of the multi-satellite sensors and DEM data. The newly generated surface geometry expression of Ganos segment was compared with Global Positioning System (GPS) velocity vectors.

Kinematical and Structural Patterns of the Yingjing-Mabian-Yanjin Thrust Fault Zone, Southeast of the Qinghai-Xizang (Tibet) Plateau and Its Segmentation from Earthquakes

Segmentation of the thrust fault zone is a basic problem for earthquake hazard evaluation. The Yingjing-Mabian-Yanjin thrust fault zone is an important seismic belt NW-trending in the southeast margin of the Qinghal-Xizang （Tibet） plateau. The longitudinal faults in the thrust zone are mainly of the thrust slipping type. The late Quaternary motion modes and displacement rates are quite different from north to south. Investigation on valleys across the fault shows that the transverse faults are mainly of dextral strike-slipping type with a bit dip displacement. Based on their connections with the longitudinal faults, three types of transverse faults are generalized, namely： the separate fault, the transform fault and the tear fault, and their functions in the segmentation of the thrust fault zone are compared. As the result, the Yingjing-Mabian-Yanjin thrust fault zone is divided into three segments, and earthquakes occurring in these three segments are compared. The tri-section of the Yingjing-Mabian-Yanjin thrust fault zone identified by transverse fault types reflects, on the one hand, the differences in slip rate, earthquake magnitude and pace from each segment, and the coherence of earthquake rupturing pace on the other hand. It demonstrates that the transverse faults control the segmentation to a certain degree, and each type of the transverse faults plays a different role.

Late-Quaternary Movement Along the Sertengshan Piedmont Fault and a Model for Segmentation of Its Rupture

Analysis and study of the geometrical structure of the fault, tectonic features of late Quaternary movement, paleoseismic activity, and structural characteristics of boundaries between segments of the Sertengshan piedmont fault permitted us to preliminarily determine the following 4 active segments of the fault: the Wujiahe segment (from Dongwugai Gully to Dahoudian Village), Wujumengkou Dongfeng Village segment (from Dahoudian to Delingshan), Dashetai segment (from Delingshan to Xiaoshetai Gully mouth), and the Ulan Hudong segment (from Xiaoshetai Gully mouth to Tailiang). The boundaries between them are the Dagoudian mountain spur, the Delingshan Mountain spur and the step zone at Xiaoshetai Gully mouth, respectively. The segments are independent for seismic activity. However, it is possible that joint ruptures between Wujiahe and Wujumengkou Dongfeng Village segments and between Dashetai and Ulan Hudong segments may occur.

New Evidence of Late Quaternary Activity on the Xinyi-Wuhe Segment of the Tancheng-Lujiang Fault Zone

The Tancheng-Lujiang fault zone has great influence in eastern China. Studies have shown obvious signs of neotectonic activities on the Xinyi-Wuhe segment of the Tancheng-Lujiang fault zone. In this study,on the basis of the previous work,many seismological surveys are made along the Tancheng-Lujiang fault zone and trenches are excavated in key sites.Combined with the analysis of the seismic activities along the fault,the fault movement features and future seismic risk are discussed. Much first-hand information obtained in the paper can provide an important reference value for the study of large earthquake recurrence rules and the mid and long-term earthquake prediction on the Xinyi-Wuhe segment of the Tancheng-Lujiang fault zone.

Cenozoic Denudation and Vertical Faulting History of the Central Segment of the Longmenshan Thrust Belt

Objective The uplift process and uplift mechanism of the Tibetan Plateau has been a research focus among geologists in recent years. This work put emphasis on the Cenozoic exhumation histories of the blocks bounded by the major faults at the central segment of the Longmenshan thrust belt, and the vertical faulting history, including the starting time and the total vertical displacement, of the major faults. Then we quantitatively established a complete active process for the central segment of the Longmenshan thrust belt, combining with the previous geophysical data in the deep and geologcial data. This study is critical for deeply and completely understanding the Cenozoic uplift history of the Longmenshan, and also provides thermochronology constraints to the different models for the uplift of the eastern margin of the Tibetan Plateau.

Analysis of Dynamic Characteristics of Crustal Horizontal Deformation in the South Segment of Longmenshan Fault Zone Revealed by GPS Data after the Wenchuan Earthquake

In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.