ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve...ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N_2 adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h^(-1),and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts.展开更多
A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/...A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.展开更多
A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3P...A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3PW12O40/MCM-48 was studied with butyraldehyde and glycol as reactants. H3PW12O40/MCM-48 was an excellent catalyst for the synthesizing butyraldehyde glycol acetal and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（butyraldehyde）： n（glycol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions had been found, that was, molar ratio of butyraldehyde to glycol was 1： 1.6, mass ratio of catalyst used to the reactants was 0.25% and reaction time was 75 min. Under these conditions, the yield of butyraldehyde glycol acetal can reach 79.74%.展开更多
A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O4...A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H4SiW12O40/MCM-48 was an excellent catalyst for the synthesis of n-butyl methacrylate and Keggin structure ofH4SiW12O40 kept unchanged after impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）： n（n-butyl alcohol）, catalyst dosage, cyclohexane （water-stripped reagent） and reaction time on the yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.5, mass ratio of catalyst used to the reactant is 1.5%, cyclohexane is 10 mL and reaction time is 1.5h. Under these conditions, the yield of n-butyl methacrylate can reach 73.2%.展开更多
采用后合成法制备复合分子筛Y/MCM-41,并以其为载体,用活性组分硝酸镍对其改性,制备Ni-Y/MCM-41催化剂,并利用XRD、BET、N2吸附-脱附对其进行表征。结果表明,复合分子筛同时具有微孔分子筛Y沸石和介孔材料MCM-41分子筛的特征。以硫质量...采用后合成法制备复合分子筛Y/MCM-41,并以其为载体,用活性组分硝酸镍对其改性,制备Ni-Y/MCM-41催化剂,并利用XRD、BET、N2吸附-脱附对其进行表征。结果表明,复合分子筛同时具有微孔分子筛Y沸石和介孔材料MCM-41分子筛的特征。以硫质量分数为300μg/g的模拟油进行催化氧化脱硫实验,考察了Ni离子的负载量、反应温度、反应时间、催化剂用量、氧化剂用量等工艺条件对脱硫率的影响。结果表明:硝酸镍的负载量为10%,模拟油用量为20 m L,反应温度为70℃,反应时间为80 min,剂油比(催化剂与模拟油的质量比)为1∶70,V(H2O2)/V(油)=0.03时,脱硫率可达86.53%。展开更多
文摘ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N_2 adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h^(-1),and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts.
基金Funded by the Natural Science Foundation of Hubei Province,China(No.2005ABA053)the National Natural ScienceFoundation of China(No.20471044)
文摘A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.
基金This work was financially supported by the Natural Science Foundation of Hubei Province, China （No. 2005ABA053）.
文摘A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3PW12O40/MCM-48 was studied with butyraldehyde and glycol as reactants. H3PW12O40/MCM-48 was an excellent catalyst for the synthesizing butyraldehyde glycol acetal and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（butyraldehyde）： n（glycol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions had been found, that was, molar ratio of butyraldehyde to glycol was 1： 1.6, mass ratio of catalyst used to the reactants was 0.25% and reaction time was 75 min. Under these conditions, the yield of butyraldehyde glycol acetal can reach 79.74%.
基金Acknowledgment： This work was financially supported by the Natural Science Foundation of Hubei Province, China （No. 2005ABA053） and Hubei Normal University.
文摘A novel environmental friendly catalyst, H4SiW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H4SiW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H4SiW12O40/MCM-48 was an excellent catalyst for the synthesis of n-butyl methacrylate and Keggin structure ofH4SiW12O40 kept unchanged after impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）： n（n-butyl alcohol）, catalyst dosage, cyclohexane （water-stripped reagent） and reaction time on the yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.5, mass ratio of catalyst used to the reactant is 1.5%, cyclohexane is 10 mL and reaction time is 1.5h. Under these conditions, the yield of n-butyl methacrylate can reach 73.2%.
文摘采用后合成法制备复合分子筛Y/MCM-41,并以其为载体,用活性组分硝酸镍对其改性,制备Ni-Y/MCM-41催化剂,并利用XRD、BET、N2吸附-脱附对其进行表征。结果表明,复合分子筛同时具有微孔分子筛Y沸石和介孔材料MCM-41分子筛的特征。以硫质量分数为300μg/g的模拟油进行催化氧化脱硫实验,考察了Ni离子的负载量、反应温度、反应时间、催化剂用量、氧化剂用量等工艺条件对脱硫率的影响。结果表明:硝酸镍的负载量为10%,模拟油用量为20 m L,反应温度为70℃,反应时间为80 min,剂油比(催化剂与模拟油的质量比)为1∶70,V(H2O2)/V(油)=0.03时,脱硫率可达86.53%。
