基于Y-shaped路网的早高峰拼车定价策略

针对交通资源配置有限导致的早高峰通勤拥堵问题,借鉴共享经济理论,引入拼车出行概念,充分考虑通勤者出行方式和Y-shaped路网特点,建立了基于通勤者出行效益的拼车定价模型.模型结合费用补偿机制,讨论了以平台利润最大化和系统负效用最小化为目标的拼车定价策略,并给出了定价策略有效的阈值条件.研究结果表明,当通勤者都参与到拼车服务中时,拼车平台利润和交通系统负效用在其相应拼车定价策略下均能达到最优值,并且以交通系统负效用最小化为目标的拼车定价策略能消除Y-shaped路网中瓶颈处的交通拥堵.

An Elite-Class Teaching-Learning-Based Optimization for Reentrant Hybrid Flow Shop Scheduling with Bottleneck Stage

Bottleneck stage and reentrance often exist in real-life manufacturing processes;however,the previous research rarely addresses these two processing conditions in a scheduling problem.In this study,a reentrant hybrid flow shop scheduling problem(RHFSP)with a bottleneck stage is considered,and an elite-class teaching-learning-based optimization(ETLBO)algorithm is proposed to minimize maximum completion time.To produce high-quality solutions,teachers are divided into formal ones and substitute ones,and multiple classes are formed.The teacher phase is composed of teacher competition and teacher teaching.The learner phase is replaced with a reinforcement search of the elite class.Adaptive adjustment on teachers and classes is established based on class quality,which is determined by the number of elite solutions in class.Numerous experimental results demonstrate the effectiveness of new strategies,and ETLBO has a significant advantage in solving the considered RHFSP.

Improved multi-scale inverse bottleneck residual network based on triplet parallel attention for apple leaf disease identification

Accurate diagnosis of apple leaf diseases is crucial for improving the quality of apple production and promoting the development of the apple industry. However, apple leaf diseases do not differ significantly from image texture and structural information. The difficulties in disease feature extraction in complex backgrounds slow the related research progress. To address the problems, this paper proposes an improved multi-scale inverse bottleneck residual network model based on a triplet parallel attention mechanism, which is built upon ResNet-50, while improving and combining the inception module and ResNext inverse bottleneck blocks, to recognize seven types of apple leaf(including six diseases of alternaria leaf spot, brown spot, grey spot, mosaic, rust, scab, and one healthy). First, the 3×3 convolutions in some of the residual modules are replaced by multi-scale residual convolutions, the convolution kernels of different sizes contained in each branch of the multi-scale convolution are applied to extract feature maps of different sizes, and the outputs of these branches are multi-scale fused by summing to enrich the output features of the images. Second, the global layer-wise dynamic coordinated inverse bottleneck structure is used to reduce the network feature loss. The inverse bottleneck structure makes the image information less lossy when transforming from different dimensional feature spaces. The fusion of multi-scale and layer-wise dynamic coordinated inverse bottlenecks makes the model effectively balances computational efficiency and feature representation capability, and more robust with a combination of horizontal and vertical features in the fine identification of apple leaf diseases. Finally, after each improved module, a triplet parallel attention module is integrated with cross-dimensional interactions among channels through rotations and residual transformations, which improves the parallel search efficiency of important features and the recognition rate of the network with relatively small computational costs while the dimensional dependencies are improved. To verify the validity of the model in this paper, we uniformly enhance apple leaf disease images screened from the public data sets of Plant Village, Baidu Flying Paddle, and the Internet. The final processed image count is 14,000. The ablation study, pre-processing comparison, and method comparison are conducted on the processed datasets. The experimental results demonstrate that the proposed method reaches 98.73% accuracy on the adopted datasets, which is 1.82% higher than the classical ResNet-50 model, and 0.29% better than the apple leaf disease datasets before preprocessing. It also achieves competitive results in apple leaf disease identification compared to some state-ofthe-art methods.

Gastrotracheal fistula:Treatment with a covered self-expanding Y-shaped metallic stent

A 67-year-old man had a sev-ere cough and pulmonary infection for 1 wk before seeking evaluation at our hospital.He had undergone esophagectomy with gastric pull-up and radiotherapy for esophageal cancer 3 years previously.After admission to our hospital,gastroscopy and bronchoscopy revealed a fistulous communication between the posterior tracheal wallnear the carina and the upper residual stomach.We measured the diameter of the trachea and bronchus and determined the site and size of the fistula using multislice computed tomography and gastroscopy.A covered self-expanding Y-shaped metallic stent was implanted into the trachea and bronchus.Subsequently,the fistula was closed completely.The patient tolerated the stent well and had good palliation of his symptoms.

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.

Deformation and defects in hydroforming of Y-shaped tubes

Hydroforming process of a Y-shaped stainless steel tube was investigated through numerical simulation and experiments. The forming process and reasons of typical defects were analyzed with three different loading paths. Thickness distribution of formed Y-shaped tube was obtained. It is shown by numerical and experimental results that the transition regions are depressed in the forming condition of low inner pressure and wrinkles occur, while fracture occurs in the forming condition of high inner pressure. After forming, the thickness in left transition fillet region is the largest, that in fight transition fillet region is thinner, and the thinnest thickness is at the top of the protrusion. The original thickness line is below the top of the protrusion. The thinning area occurs above this line, while the thickening area is below this line. The maximum thinning rate is significantly increased as the calibration pressure increases, while the maximum thickening rate remains almost unchanged.

Binary collision approximation for solitary waves in a Y-shaped granular chain

We implement a binary collision approximation to study solitary wave propagation in a two-dimensional double Y- shaped granular chain. The solitary wave was transmitted and reflected when it met the interface of the bifurcated branches of the Y-shaped granular chains. We obtain the analytic results of the ratios of the transmitted and reflected speeds to the incident speed of the solitary wave, the maximum force between the two neighbor beads in a solitary wave, and the total time taken by the pulse to pass through each branch. All of the analytic results are in good agreement with the experimental observations from Daraio et al. [Phys. Rev. E 82 036603 （2010）]. Moreover, we also discuss the delay effects on the arrival of split pulses, and predict the recombination of the split waves traveling in branches in the final stem of asymmetric systems. The prediction of pulse recombination is verified by our numerical results.

Evaluation of ultimate bearing capacity of Y-shaped vibro-pile

Based on Mindlin stress solution, a numerical computational method was proposed to calculate the stresses in the ground induced by side friction and the resistance of Y-shaped vibro-pile. The improved Terzaghi's and ЪерезанцевВГ's methods for ultimate bearing capacity evaluation were proposed by considering the stress strength induced by friction resistance at pile head level of Y-pile. A new method to calculate the ultimate bearing capacity of Y-pile was also proposed based on the assumptions of soil failure mode at the tip of Y-pile and the use of Mohr-Coulomb soil yield criterion and Vesic compressive correction coefficient with the induced stresses in the ground. Based on the comparisons with the field static load test results, it is found that the improved Terzaghi's method gives higher ultimate capacity, while the other two methods shows good agreement with the field results.

Transfer characteristics of dynamic biochemical signals in non-reversing pulsatile flows in a shallow Y-shaped microfluidic channel: signal filtering and nonlinear amplitude-frequency modulation

The transports of the dynamic biochemical signals in the non-reversing pulsatile flows in the mixing microchannel of a Y-shaped microfluidic device are ana- lyzed. The results show that the mixing micro-channel acts as a low-pass filter, and the biochemical signals are nonlinearly modulated by the pulsatile flows, which depend on the biochemical signal frequency, the flow signal frequency, and the biochemical signal transporting distance. It is concluded that, the transfer characteristics of the dynamic biochemical signals, which are transported in the time-varying flows, should be carefully considered for better loading biochemical signals on the cells cultured on the bottom of the microfluidic channel.

Y-Shaped Intra-Scleral Fixated Lens versus Retro-Pupillary Iris Claw Lens in the Treatment of Aphakia

Background: Many reasons can lead to an aphakia without adequate capsular support for implantation of a posterior chamber intraocular lens (IOL), such as intraoperative unintentional rupture of posterior capsule during phacoemulsification, planned intracapsular cataract extraction, ocular trauma and lens dislocation due to congenital and acquired causes. Purpose: To compare Y-shaped intra-scleral fixation of a posterior chamber IOL with retro pupillary fixation of an iris-claw intraocular lens (IOL) for Aphakic eyes without sufficient capsular support as respects safety, visual recovery and complications of both methods. Patients and Methods: One hundred Aphakic eyes were arbitrarily distributed between two groups. Group A included 50 eyes treated with retropupillary fixation of iris claw lens and group B included 50 eyes treated with Y-shaped intra-scleral fixation technique. Preoperative, intraoperative and postoperative data were analysed including best corrected visual acuity (BCVA), intraocular pressure (IOP), surgical time, intraoperative problems, IOL malposition and postoperative complications. Following up on patients was carried out for at least six months. Results: The mean duration of surgery was 21 ± 5.3 min in group A and was 53.4 ± 6.9 min in group B (p-value 0.05). IOL tilt was found in 0 (0%) eyes in group A and in 5 (10%) eyes in group B (p 0.05). Conclusion: The results of our study indicated that both methods are satisfactory in correcting aphakia without sufficient capsular support as regards postoperative best corrected visual acuity (BCVA);however the surgical technique of retropupillary iris claw lens is easier, shorter, with low intra- and postoperative complications and safer than those used for intra-scleral fixation of IOL. But for eyes which lack both iris and capsular support, a scleral fixation of a posterior chamber IOL remains the only option.

Comparison of lag screws and double Y-shaped miniplates in the fixation of anterior mandibular fractures

BACKGROUNDMandibular fractures constitute about 80.79% of maxillofacial injuries inAlexandria University, either as isolated mandibular fractures or as a part ofpanfacial fractures. The combination of symphyseal and parasymphyseal fracturesrepresent 47.09% of the total mandibular fractures.AIMTo compare the effectiveness of lag screws vs double Y-shaped miniplates in thefixation of anterior mandibular fractures.METHODSThis study is a prospective randomized controlled clinical trial, performed onsixteen patients with anterior mandibular fractures. Patients were divided equallyinto two groups, each consisting of eight patients. Group 1: Underwent openreduction and internal fixation using two lag screws. Group 2: Underwent openreduction and internal fixation using double Y-shaped plates. The followingparameters were assessed: operating time in minutes, pain using a visual analogscale, edema, surgical wound healing for signs and symptoms of infection,occlusion status and stability, maximal mouth opening, and sensory nervefunction. Cone beam computed tomography was performed at 3 and 6 mo tomeasure bone density and assess the progression of fracture healing.RESULTSThe study included 13 males (81.3%) and 3 females (18.8%) aged 26 to 45 years(mean age was 35.69 ± 6.01 years). The cause of trauma was road traffic accidentsin 10 patients (62.5%), interpersonal violence in 3 patients (18.8%) and othercauses in 3 patients (18.8%). The fractures comprised 10 parasymphyseal fractures(62.5%) and 6 symphyseal fractures (37.5%). The values of all parameters were comparable in both groups with no statistically significant difference except forthe mean bone density at 3 mo postoperatively which was 946.38 ± 66.29 in group 1 and 830.36 ± 95.53 in group 2 (P = 0.015).CONCLUSIONBoth lag screws and double Y-shaped miniplates provide favorable means offixation for mandibular fractures in the anterior region. Fractures fixed with lagscrews show greater mean bone density at 3 mo post-operation, indicative ofhigher primary stability and faster early bone healing. Further studies with largersample sizes are required to verify these conclusions.

Efficient control of connected and automated vehicles on a two-lane highway with a moving bottleneck

This paper investigates the traffic flow of connected and automated vehicles(CAVs)inducing by a moving bottleneck on a two-lane highway.A heuristic rules-based algorithm(HRA)has been used to control the traffic flow upstream of the moving bottleneck.In the HRA,some CAVs in the control zone are mapped onto the neighboring lane as virtual ones.To improve the driving comfort,the command acceleration caused by virtual vehicle is restricted.Comparing with the benchmark in which the CAVs change lane as soon as the lane changing condition is met,the HRA significantly improves the traffic flow:the overtaking throughput as well as the outflow rate increases,the travel delay and the fuel consumption decrease,the comfort level could also be improved.

政府补助在激励企业“卡脖子”技术创新中能否提供助力——以企业参与内循环程度为调节变量

如何推动“卡脖子”技术企业创新,是近年来我国面临的重要战略问题。尝试引入锦标赛理论解释政府补助的激励机理,基于2011—2020年我国半导体及芯片行业上市企业数据,结合近年国家提出以内循环为主的新发展战略,以企业参与内循环程度为调节变量,实证研究政府补助对“卡脖子”技术企业创新产出的激励作用。结果表明,政府补助与“卡脖子”技术企业创新产出间具有倒U型关系,企业参与内循环程度在政府补助与“卡脖子”技术企业创新产出的倒U型关系中起调节作用。研究结论可为“卡脖子”技术企业在新发展格局下开展高质量创新提供参考。

突破“卡脖子”技术:知识开发模式对企业关键核心技术及其衍生技术的影响

在新一轮科技革命与百年未有之大变局下,我国企业正面临由贸易之争转变为科技实力之争带来的“卡脖子”技术困境。基于突破“卡脖子”技术的现实问题,以中国上市公司发明专利为数据集,分析企业知识开发模式对关键核心技术及其衍生技术的影响。结果表明,内部创新模式与外部创新模式均对企业关键核心技术及其衍生技术突破具有促进作用,但相比之下,外部模式产生的影响更加显著。进一步研究发现,市场竞争强度在知识开发与衍生技术之间起促进作用;选择外部知识开发模式不仅有利于衍生技术数量增长,而且有助于专利质量提高;衍生技术的成果转化会反馈新的关键核心技术突破。研究结论对我国企业高效选择创新路径,实现“卡脖子”技术突破具有重要参考价值。

以瓶颈问题为导向的本科生创新能力跨专业培养——以机械工程学科本科生毕业设计为例

本科阶段的教育是培养创新型人才的基础环节。探讨以瓶颈问题为导向的本科生创新能力跨专业协作培养方法,具体包括:促进本科生全流程积极参与实际科研项目、以瓶颈问题为导向设置本科生培养环节、跨专业协作培养以提升本科生知识融合水平,以及面向本科生的跨专业或校内资源共享等有效途径,提升本科生创新能力的培养效果,为我国创新型人才培养助力。

日间手术高质量发展瓶颈突破策略SWOT分析

目的分析日间手术运营管理创新方面的优势、劣势、机会和威胁,探索其潜在问题并制订相应的发展策略。方法2022年9月—2023年9月郑州大学第一附属医院采用SWOT分析方法,结合相关文献综述和专家意见,对日间手术高质量发展管理创新进行评估。结果日间手术可以缩短住院时间、减少床位需求,降低医疗成本、减轻患者的经济负担、提高手术效率和患者满意度。劣势在于术后需要完善的完全保障服务。机会在于有政策支持,新型手术设备和智能化管理系统的应用,社会对降低医疗费用的需求。威胁主要在于日间手术设施、人员配置和管理经验方面存在不足,另外还涉及手术风险、患者安全和法律责任等问题。结论日间手术需要借助科技创新,加强人员培训和设备更新,完善管理和运营机制,关注患者的术后护理需求,以促进管理创新和高质量发展。

面向钣金混流生产线的仿真优化研究

文章以某电梯钣金加工公司的钣金混流生产线为背景,通过虚拟仿真方法对钣金生产环节中的投产序列和瓶颈问题进行优化。首先,根据某电梯门板生产线的实际生产状况,建立生产线的仿真模型,以工件完工时间、设备空闲时间和设备总切换时间为目标,基于遗传算法,优化钣金混流生产线的投产序列;其次,通过分析缓存区添加位置和容量对钣金生产线产量的影响,解决生产线堵塞、利用率不平衡等问题。结果表明,对生产线的优化有效,经优化后的投产序列相比原始投产序列整体时间缩短约15%,通过适宜的缓存区设置,各工位设备平均利用率提高了9.6%,产量提高了14.15%。

面向带宽受限场景的高效语义通信方法

语义通信为通信系统优化和性能提升提供了新的研究角度,然而,目前语义通信的研究忽略了通信开销的影响,未考虑语义通信性能和通信开销的关系,导致带宽资源受限时语义通信性能难以提升。为此,针对带宽受限场景,提出一种基于信息瓶颈的语义通信方法。首先,该方法采用Transformer模型进行语义和信道联合编解码,并设计特征选择模块以识别和删除冗余语义信息,构建了端到端语义通信模型;进而考虑语义通信性能与通信开销之间的折衷关系,基于信息瓶颈理论设计损失函数,在保证语义通信性能的同时,降低通信开销,完成语义通信模型的训练和优化。实验结果显示,在欧洲议会平行语料库上,与基线模型相比,所提方法在保证通信性能的同时可降低约20%~30%的通信开销,在相同带宽条件下该方法的BLEU分数可提升约5%。实验结果表明,所提方法可以有效降低语义通信开销,从而提升带宽资源受限场景下的语义通信性能。

某600MW亚临界机组20%深度调峰技术方案应用探讨

新型电力系统中煤电将是最重要的调节性电源,越来越多的煤电机组将参与深度调峰。现有机组普遍面临低负荷时锅炉稳燃、受热面超温、脱硝投入、汽机安全性等问题不能实现深度调峰。对国内某600 MW亚临界机组进行了深度调峰摸底试验,得到了制约机组实现20%负荷深度调峰的瓶颈。针对瓶颈,为实现20%深度调峰,提出了锅炉侧燃烧器优化、磨煤机分离器改造、送风机改造、水平烟道吹灰优化,汽机侧辅助蒸汽系统改造,控制侧逻辑优化等技术方案。

大基金与“卡脖子”行业发展——来自半导体行业上市公司的证据

“解决‘卡脖子’难题,强化科技创新和产业链供应链韧性”是实现高质量发展需要攻克的重点任务。产业投资基金作为政府之手与市场之手相结合的政策工具,已成为扶持行业发展的重要方式。文章以2014年国家集成电路产业投资基金(大基金)成立作为准自然实验场景,以半导体行业为例,建立双重差分模型检验产业投资基金对“卡脖子”行业发展的影响。研究发现:(1)大基金显著促进半导体行业企业发展,该结论在考虑多维度混杂影响、内生性问题等一系列可能的干扰因素后依旧成立。具体表现为企业规模扩张能力、营业收入增长能力和创新能力均显著提升。(2)相比于孵化期、成熟期的企业,大基金对成长期企业的发展促进作用更加显著。此外,上述政策效应尤其体现在所处地区腐败程度较低的企业,进一步突出了“市场化”因素在产业投资基金运行中的重要性。(3)机制检验发现,大基金通过直接投资和引导投资缓解企业融资约束、通过发挥“信号效应”提振投资者信心等渠道助力企业多方位发展。文章的研究丰富了产业投资基金的效应分析及机制讨论,为实现我国科技自立自强提供可行的实施路径,也为进一步优化产业政策、突破国际困局以及保证国民经济稳定发展提供参考。