Rapid surface resolidification with a high powered CO2-laser was performed in preparing directionally solidified Al2O3/YAG/ZrO2 ternary eutectic ceramic in situ composite.The effects of laser processing parameters on ...Rapid surface resolidification with a high powered CO2-laser was performed in preparing directionally solidified Al2O3/YAG/ZrO2 ternary eutectic ceramic in situ composite.The effects of laser processing parameters on the solidification microstructure characteristics and thermal properties were studied by scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),X-ray diffractometry(XRD)and synthetically thermal analysis(STA).Detailed investigations of the influence of laser power and scanning rate on the preparation and microstructural parameters of the ternary eutectic were presented.Moreover, the eutectic phase separation rule at high temperature was discussed.The results indicate that solidification microstructure of the ternary eutectic composite is greatly influenced by the laser processing parameters.The synthetically thermal analysis shows that the eutectic temperature of ternary Al2O3/YAG/ZrO2 composite is 1 738℃,well matching the phase diagram of Al2O3-Y2O3-ZrO2.展开更多
YAG： Ce^3 ＋ phosphor particles were prepared using polyacrylamide gel method. The structure evolution of powders during annealing process was followed by X-ray diffraction determination. It is found that some interm...YAG： Ce^3 ＋ phosphor particles were prepared using polyacrylamide gel method. The structure evolution of powders during annealing process was followed by X-ray diffraction determination. It is found that some intermediate phases, including θ-Al2O3, YAM and YAP, are formed when calcining polyacrylamide gel, however, the pure YAG phase can be formed directly when calcining polyacrylamide gel with α-Al2O3 as seed crystal. These facts show that the existence of α- Al2O3 seed crystal can block the formation of θ-Al2O3, YAM and YAP, and accelerate its reaction with Y2O3 to form YAG phase directly at lower temperature. The emission peak of prepared YAG ： Ce^3 ＋ phosphor is wide with maximum at 550 nm and the exitation band has two peaks, the major one is around at 460 nm, which matches the blue emission of GaN LED and is suitable for the assemble of white LED. Some fluxes can enhance the photoluminescence intensity of phosphor particles, that can be attributed both to the improvement of crystallization processes of YAG and to the stabilization of trivalence cerium ion in YAG：Ce^3 ＋.展开更多
Laser remelting and rapid solidification were performed in preparing the high-performance Al2O3/Y3Al5O12(YAG) eutectic in situ composite. The microstructure characteristic and solidification behavior were studied usin...Laser remelting and rapid solidification were performed in preparing the high-performance Al2O3/Y3Al5O12(YAG) eutectic in situ composite. The microstructure characteristic and solidification behavior were studied using scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffractometry(XRD) and simultaneous thermal analysis(STA). The hardness and fracture toughness were obtained using an indentation technique. The results show that the laser remelted Al2O3/YAG composite has a homogeneous eutectic microstructure without microcrack and pore. The component phases of Al2O3 and YAG are three-dimensionally and continuously reticular connected, and finely coupled without grain boundaries, colonies and amorphous phases between interfaces. The eutectic interspacing is greatly refined with increasing the scanning rate and average is only 1 μm. The synthetically thermal analysis indicates that the eutectic temperature of Al2O3-YAG is 1 824 ℃, well matching the phase diagram of Al2O3-Y2O3 system. The maximum hardness reaches 19.5 GPa and the room fracture toughness is 3.6 MPa·m1/2.展开更多
Phase composition and microstructures of grain boundary of oversintered yttrium aluminum garnet (Y3Al5O12, YAG) ceramics by vacuum sintering at 1 850℃were investigated. For synthesizing YAG,grain boundary is a key fa...Phase composition and microstructures of grain boundary of oversintered yttrium aluminum garnet (Y3Al5O12, YAG) ceramics by vacuum sintering at 1 850℃were investigated. For synthesizing YAG,grain boundary is a key factor for YAG ceramics. The morphology of grain boundary was observed by SEM, TEM and its composition was analyzed by EDS. It is identified that the grain boundary is composed ofα-Al2O3 and yttrium aluminum perovskite (YAP, YAlO3) eutectics. At the edge of YAG crystal grain, YAG phase is decomposed into perovskite YAP andα-Al2O3 during high temperature sintering. Due to refractive indexes of YAP andα-Al2O3 phases in wide grain boundary are different from those of YAG, the transmittance of oversintered YAG ceramics is lower than that of YAG ceramics sintered at 1 750℃.展开更多
Large size,high-density(99.97%)and well-organized Al2O3/Y3Al5O12(YAG)eutectic ceramics were prepared by the modified Bridgman method.The evolution of the three dimensional microstructure and micropores were investigat...Large size,high-density(99.97%)and well-organized Al2O3/Y3Al5O12(YAG)eutectic ceramics were prepared by the modified Bridgman method.The evolution of the three dimensional microstructure and micropores were investigated.The diameter of the micro-pores and the porosity decreased during directional solidification.The average equivalent diam eter of the micro-pores was 2.41μm in the well-prepared eutectic ceramics.Most of the pores(98.07%)were smaller than 4μm.These data are comparable to those prepared by the optical floating zone method.The as-grown eutectic ceramics were polycrystalline,but the interfaces were well-bonded and there were no amorphous phases in the microstructure.The misfits of the different crystallographic relationships were calculated,and the bottleneck of the single-crystal preparation was identified.These results could provide theoretical guidance for the preparation of large,single-crystal Al2O3/YAG eutectic ceramics by the modified Bridgman method.展开更多
基金Project(50772090)supported by the National Natural Science Foundation of ChinaProject(04G53048)supported by the Aeronautical Science Foundation of China+4 种基金Project(20040699035)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(W018101)supported by the Foundation Research Fund of Northwestern Polytechnical University,ChinaProject(2007AMM004)supported by the Opening Project of State Key Laboratory for Advanced Metals and Materials,ChinaProject supported by the Fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University,ChinaProject supported by the Scientific Research Start-up Foundation for Outstanding Persons in Northwestern Polytechnical University,China
文摘Rapid surface resolidification with a high powered CO2-laser was performed in preparing directionally solidified Al2O3/YAG/ZrO2 ternary eutectic ceramic in situ composite.The effects of laser processing parameters on the solidification microstructure characteristics and thermal properties were studied by scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),X-ray diffractometry(XRD)and synthetically thermal analysis(STA).Detailed investigations of the influence of laser power and scanning rate on the preparation and microstructural parameters of the ternary eutectic were presented.Moreover, the eutectic phase separation rule at high temperature was discussed.The results indicate that solidification microstructure of the ternary eutectic composite is greatly influenced by the laser processing parameters.The synthetically thermal analysis shows that the eutectic temperature of ternary Al2O3/YAG/ZrO2 composite is 1 738℃,well matching the phase diagram of Al2O3-Y2O3-ZrO2.
文摘YAG： Ce^3 ＋ phosphor particles were prepared using polyacrylamide gel method. The structure evolution of powders during annealing process was followed by X-ray diffraction determination. It is found that some intermediate phases, including θ-Al2O3, YAM and YAP, are formed when calcining polyacrylamide gel, however, the pure YAG phase can be formed directly when calcining polyacrylamide gel with α-Al2O3 as seed crystal. These facts show that the existence of α- Al2O3 seed crystal can block the formation of θ-Al2O3, YAM and YAP, and accelerate its reaction with Y2O3 to form YAG phase directly at lower temperature. The emission peak of prepared YAG ： Ce^3 ＋ phosphor is wide with maximum at 550 nm and the exitation band has two peaks, the major one is around at 460 nm, which matches the blue emission of GaN LED and is suitable for the assemble of white LED. Some fluxes can enhance the photoluminescence intensity of phosphor particles, that can be attributed both to the improvement of crystallization processes of YAG and to the stabilization of trivalence cerium ion in YAG：Ce^3 ＋.
基金Project(50102004) supported by the National Natural Science Foundation of ChinaProject(04G53048) supported by the Aeronautical Science Foundation of China+2 种基金Project(20040699035) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(W018101) supported by the Research Fund of Northwestern Polytechnical University, ChinaProject supported by the Developing Program for Outstanding Persons in Northwestern Polytechnical University, China
文摘Laser remelting and rapid solidification were performed in preparing the high-performance Al2O3/Y3Al5O12(YAG) eutectic in situ composite. The microstructure characteristic and solidification behavior were studied using scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffractometry(XRD) and simultaneous thermal analysis(STA). The hardness and fracture toughness were obtained using an indentation technique. The results show that the laser remelted Al2O3/YAG composite has a homogeneous eutectic microstructure without microcrack and pore. The component phases of Al2O3 and YAG are three-dimensionally and continuously reticular connected, and finely coupled without grain boundaries, colonies and amorphous phases between interfaces. The eutectic interspacing is greatly refined with increasing the scanning rate and average is only 1 μm. The synthetically thermal analysis indicates that the eutectic temperature of Al2O3-YAG is 1 824 ℃, well matching the phase diagram of Al2O3-Y2O3 system. The maximum hardness reaches 19.5 GPa and the room fracture toughness is 3.6 MPa·m1/2.
基金Project(41312040404) supported by the National Defence "15" Pre-Research Foundation of China
文摘Phase composition and microstructures of grain boundary of oversintered yttrium aluminum garnet (Y3Al5O12, YAG) ceramics by vacuum sintering at 1 850℃were investigated. For synthesizing YAG,grain boundary is a key factor for YAG ceramics. The morphology of grain boundary was observed by SEM, TEM and its composition was analyzed by EDS. It is identified that the grain boundary is composed ofα-Al2O3 and yttrium aluminum perovskite (YAP, YAlO3) eutectics. At the edge of YAG crystal grain, YAG phase is decomposed into perovskite YAP andα-Al2O3 during high temperature sintering. Due to refractive indexes of YAP andα-Al2O3 phases in wide grain boundary are different from those of YAG, the transmittance of oversintered YAG ceramics is lower than that of YAG ceramics sintered at 1 750℃.
基金financially supported by the National Natural Science Foundation of China (Nos. 51804252 and 51701156)the Equipment Pre-Research Foundation of China (Nos. 6140759040102 and 6140923040203)the Doctoral Starting Fund of Xi’an University of Technology (No. 101-451116013)
文摘Large size,high-density(99.97%)and well-organized Al2O3/Y3Al5O12(YAG)eutectic ceramics were prepared by the modified Bridgman method.The evolution of the three dimensional microstructure and micropores were investigated.The diameter of the micro-pores and the porosity decreased during directional solidification.The average equivalent diam eter of the micro-pores was 2.41μm in the well-prepared eutectic ceramics.Most of the pores(98.07%)were smaller than 4μm.These data are comparable to those prepared by the optical floating zone method.The as-grown eutectic ceramics were polycrystalline,but the interfaces were well-bonded and there were no amorphous phases in the microstructure.The misfits of the different crystallographic relationships were calculated,and the bottleneck of the single-crystal preparation was identified.These results could provide theoretical guidance for the preparation of large,single-crystal Al2O3/YAG eutectic ceramics by the modified Bridgman method.
