In the southern South-North Seismic Zone,China,seismic activity in the Yingjiang area of western Yunnan increased from December 2010,and eventually a destructive earthquake of Ms5.9 occurred near Yingjiang town on 10 ...In the southern South-North Seismic Zone,China,seismic activity in the Yingjiang area of western Yunnan increased from December 2010,and eventually a destructive earthquake of Ms5.9 occurred near Yingjiang town on 10 March 2011.The focal mechanism and hypocenter location of the mainshock suggest that the Dayingjiang Fault was the site of the mainshock rupture.However,most of foreshocks and all aftershocks recorded by a portable seismic array located close to the mainshock occurred along the N-S-striking Sudian Fault,indicating that this fault had an important influence on these shocks.Coulomb stress calculations show that three strong （magnitude ≥5.0） earthquakes that occurred in the study region in 2008 increased the coulomb stress along the plane parallel to the Dayingjiang Fault.This supports the Dayingjiang Fault,and not the Sudian Fault,as the seismogenic fault of the 2011 Ms5.9 Yingjiang earthquake.The strong earthquakes in 2008 also increased the Coulomb stress at depths of ≤5 km along the entire Sudian Fault,and by doing so increased the shallow seismic activity along the fault.This explains why the foreshocks and aftershocks of the 2011 Yingjiang earthquake were located mostly on the Sudian Fault where it cuts the shallow crust.The earthquakes at the intersection of the Sudian and Dayingjiang faults are distributed mainly along a belt that dips to the southeast at ～40°,suggesting that the Dayingjiang Fault in the mainshock area also dips to the southeast at ～40°.展开更多
Significant anomalies were observed at the geomagnetic stations in the southwest region of China before the Yingjiang M_S6. 1 earthquake and the Ludian M_S6. 5 earthquake in 2014.We processed the geomagnetic vertical ...Significant anomalies were observed at the geomagnetic stations in the southwest region of China before the Yingjiang M_S6. 1 earthquake and the Ludian M_S6. 5 earthquake in 2014.We processed the geomagnetic vertical component diurnal variation data by the spatial correlation method. The results show that during the period from April 1 to May 20,2014,there existed quasi-synchronous decrease changes in the coefficient curves between the five geomagnetic stations of Guiyang,Hechi,Nanshan,Muli,Yongning and Xinyi and Hongshan stations. Furthermore,there was a high gradient zone in the normalized correlation coefficient contour map with background values removed. The epicenters of the Yingjiang M_S6. 1 earthquake and the Ludian M_S6. 5 earthquake are located in the gradient zone or near the gradient zone.展开更多
An earthquake with Ms5.8 occurred on 10 March 2011 in Yingjiang county, western Yunnan, China. This earthquake caused 25 deaths and over 250 injuries. In order to better understand the seismotectonics in the region, w...An earthquake with Ms5.8 occurred on 10 March 2011 in Yingjiang county, western Yunnan, China. This earthquake caused 25 deaths and over 250 injuries. In order to better understand the seismotectonics in the region, we collected the arrival time data from the Yunnan seismic observational bulletins during 1 January to 25 March 2011, and precisely hand-picked the arrival times from high-quality seismograms that were recorded by the temporary seismic stations deployed by our Institute of Crustal Dynamics, China Earthquake Administration. Using these arrival times, we relocated all the earthquakes including the Yingjiang mainshock and its aftershocks using the double-difference relocation algorithm. Our results show that the relocated earthquakes dominantly occurred along the ENE direction and formed an upside-down bow-shaped structure in depth. It is also observed that after the Yingjiang mainshock, some aftershocks extended toward the SSE over about 10 km. These results may indicate that the Yingjiang mainshock ruptured a conjugate fault system consisting of the ENE trending Da Yingjiang fault and a SSE trending blind fault. Such structural features could contribute to severely seismic hazards during the moderate-size Yingjiang earthquake.展开更多
On September 8, 2018, an M_S 5.9 earthquake struck Mojiang, a county in Yunnan Province, China. We collect near-field seismic recordings(epicentral distances less than 200 km) to relocate the mainshock and the aftersh...On September 8, 2018, an M_S 5.9 earthquake struck Mojiang, a county in Yunnan Province, China. We collect near-field seismic recordings(epicentral distances less than 200 km) to relocate the mainshock and the aftershocks within the first 60 hours to determine the focal mechanism solutions of the mainshock and some of the aftershocks and to invert for the finite-fault model of the mainshock.The focal mechanism solution of the mainshock and the relocation results of the aftershocks constrain the mainshock on a nearly vertical fault plane striking northeast and dipping to the southeast. The inversion of the finite-fault model reveals only a single slip asperity on the fault plane. The major slip is distributed above the initiation point, ～14 km wide along the down-dip direction and ～14 km long along the strike direction, with a maximal slip of ～22 cm at a depth of ～6 km. The focal mechanism solutions of the aftershocks show that most of the aftershocks are of the strike-slip type, a number of them are of the normal-slip type, and only a few of them are of the thrust-slip type.On average, strike-slip is dominant on the fault plane of the mainshock, as the focal mechanism solution of the mainshock suggests, but when examined in detail, slight thrust-slip appears on the southwest of the fault plane while an obvious part of normal-slip appears on the northeast, which is consistent with what the focal mechanism solutions of the aftershocks display. The multiple types of aftershock focal mechanism solutions and the slip details of the mainshock both suggest a complex tectonic setting, stress setting, or both. The intensity contours predicted exhibit a longer axis trending from northeast to southwest and a maximal intensity of Ⅷ around the epicenter and in the northwest.展开更多
Earthquakes of M_S5. 6 and M_S6.1 occurred in Yingjiang,Yunnan on May 24 and May 30,2014 respectively. In this paper,we use the waveform data recorded by mobile seismic stations( KAC) which were set up in the source a...Earthquakes of M_S5. 6 and M_S6.1 occurred in Yingjiang,Yunnan on May 24 and May 30,2014 respectively. In this paper,we use the waveform data recorded by mobile seismic stations( KAC) which were set up in the source area after the Yingjiang MS5. 6earthquake on May 24,2014 to study the shear-wave splitting characteristics of Yingjiang M_S6.1 earthquake sequence with the SAM method. The result shows that predominant polarization of fast shear-waves before the M_S6.1 earthquake is consistent with the direction of regional principal compressive stress,and predominant polarization of fast shear-waves before the M_S6.1 earthquake show better consistency and smaller dispersion compared to after the M_S6.1 earthquake,and there may be a deflection for the fast shearwaves predominant polarization between the M_S6.1 earthquake sequence and foreshock sequence. We found that the time-delays generally exhibited a lower level before the M_S6.1earthquake and a relatively higher value after the M_S6.1 earthquake.展开更多
基金supported by the National Natural Science Foundation of China (NSFC-41174039)the China Geological Survey
文摘In the southern South-North Seismic Zone,China,seismic activity in the Yingjiang area of western Yunnan increased from December 2010,and eventually a destructive earthquake of Ms5.9 occurred near Yingjiang town on 10 March 2011.The focal mechanism and hypocenter location of the mainshock suggest that the Dayingjiang Fault was the site of the mainshock rupture.However,most of foreshocks and all aftershocks recorded by a portable seismic array located close to the mainshock occurred along the N-S-striking Sudian Fault,indicating that this fault had an important influence on these shocks.Coulomb stress calculations show that three strong （magnitude ≥5.0） earthquakes that occurred in the study region in 2008 increased the coulomb stress along the plane parallel to the Dayingjiang Fault.This supports the Dayingjiang Fault,and not the Sudian Fault,as the seismogenic fault of the 2011 Ms5.9 Yingjiang earthquake.The strong earthquakes in 2008 also increased the Coulomb stress at depths of ≤5 km along the entire Sudian Fault,and by doing so increased the shallow seismic activity along the fault.This explains why the foreshocks and aftershocks of the 2011 Yingjiang earthquake were located mostly on the Sudian Fault where it cuts the shallow crust.The earthquakes at the intersection of the Sudian and Dayingjiang faults are distributed mainly along a belt that dips to the southeast at ～40°,suggesting that the Dayingjiang Fault in the mainshock area also dips to the southeast at ～40°.
基金sponsored by the Spark Program for Earthquake Science and Technology,China Earthquake Administration(Serial No.XH17010Y)the Seismic Tracking and Orientation Task,China Earthquake Administration(Serial No.2018010401)Major Scientific and Technical Project of Science and Technology Department of Inner Mongolia in 2016(Strong Earthquake Track in the Short Stage and Integration Innovation of Stereoscopic Observation Technology in Space and Ground)
文摘Significant anomalies were observed at the geomagnetic stations in the southwest region of China before the Yingjiang M_S6. 1 earthquake and the Ludian M_S6. 5 earthquake in 2014.We processed the geomagnetic vertical component diurnal variation data by the spatial correlation method. The results show that during the period from April 1 to May 20,2014,there existed quasi-synchronous decrease changes in the coefficient curves between the five geomagnetic stations of Guiyang,Hechi,Nanshan,Muli,Yongning and Xinyi and Hongshan stations. Furthermore,there was a high gradient zone in the normalized correlation coefficient contour map with background values removed. The epicenters of the Yingjiang M_S6. 1 earthquake and the Ludian M_S6. 5 earthquake are located in the gradient zone or near the gradient zone.
基金supported by National Natural Science Foundation of China(Nos.40974201 and 40774044)to J.Lei
文摘An earthquake with Ms5.8 occurred on 10 March 2011 in Yingjiang county, western Yunnan, China. This earthquake caused 25 deaths and over 250 injuries. In order to better understand the seismotectonics in the region, we collected the arrival time data from the Yunnan seismic observational bulletins during 1 January to 25 March 2011, and precisely hand-picked the arrival times from high-quality seismograms that were recorded by the temporary seismic stations deployed by our Institute of Crustal Dynamics, China Earthquake Administration. Using these arrival times, we relocated all the earthquakes including the Yingjiang mainshock and its aftershocks using the double-difference relocation algorithm. Our results show that the relocated earthquakes dominantly occurred along the ENE direction and formed an upside-down bow-shaped structure in depth. It is also observed that after the Yingjiang mainshock, some aftershocks extended toward the SSE over about 10 km. These results may indicate that the Yingjiang mainshock ruptured a conjugate fault system consisting of the ENE trending Da Yingjiang fault and a SSE trending blind fault. Such structural features could contribute to severely seismic hazards during the moderate-size Yingjiang earthquake.
基金supported by the National Natural Science Foundation of China(project 41804088)the Special Fund of the Institute of Geophysics,China Earthquake Administration(project DQJB19B08)
文摘On September 8, 2018, an M_S 5.9 earthquake struck Mojiang, a county in Yunnan Province, China. We collect near-field seismic recordings(epicentral distances less than 200 km) to relocate the mainshock and the aftershocks within the first 60 hours to determine the focal mechanism solutions of the mainshock and some of the aftershocks and to invert for the finite-fault model of the mainshock.The focal mechanism solution of the mainshock and the relocation results of the aftershocks constrain the mainshock on a nearly vertical fault plane striking northeast and dipping to the southeast. The inversion of the finite-fault model reveals only a single slip asperity on the fault plane. The major slip is distributed above the initiation point, ～14 km wide along the down-dip direction and ～14 km long along the strike direction, with a maximal slip of ～22 cm at a depth of ～6 km. The focal mechanism solutions of the aftershocks show that most of the aftershocks are of the strike-slip type, a number of them are of the normal-slip type, and only a few of them are of the thrust-slip type.On average, strike-slip is dominant on the fault plane of the mainshock, as the focal mechanism solution of the mainshock suggests, but when examined in detail, slight thrust-slip appears on the southwest of the fault plane while an obvious part of normal-slip appears on the northeast, which is consistent with what the focal mechanism solutions of the aftershocks display. The multiple types of aftershock focal mechanism solutions and the slip details of the mainshock both suggest a complex tectonic setting, stress setting, or both. The intensity contours predicted exhibit a longer axis trending from northeast to southwest and a maximal intensity of Ⅷ around the epicenter and in the northwest.
基金jointly supported by Task Contract for Earthquake Situation Tracking of CEA in 2015(2015010113,2015010301)fundation from Earthquake Administration of Xinjiang Uygur Autonomous Region,China(201401)
文摘Earthquakes of M_S5. 6 and M_S6.1 occurred in Yingjiang,Yunnan on May 24 and May 30,2014 respectively. In this paper,we use the waveform data recorded by mobile seismic stations( KAC) which were set up in the source area after the Yingjiang MS5. 6earthquake on May 24,2014 to study the shear-wave splitting characteristics of Yingjiang M_S6.1 earthquake sequence with the SAM method. The result shows that predominant polarization of fast shear-waves before the M_S6.1 earthquake is consistent with the direction of regional principal compressive stress,and predominant polarization of fast shear-waves before the M_S6.1 earthquake show better consistency and smaller dispersion compared to after the M_S6.1 earthquake,and there may be a deflection for the fast shearwaves predominant polarization between the M_S6.1 earthquake sequence and foreshock sequence. We found that the time-delays generally exhibited a lower level before the M_S6.1earthquake and a relatively higher value after the M_S6.1 earthquake.
