3D smart mA调控技术对不同BMI患者图像采集时间质量及辐射剂量的影响

目的:分析3D智能管电流(3D smart mA)调控技术对不同体质量指数(BMI)患者图像采集时间、质量及辐射剂量的影响。方法:择取的180例行胸部CT扫描患者选自西安交通大学第一附属医院2021年6月至2022年12月期间所收治,按照BMI将患者分为三组,A组(18.5 kg/m^(2)≤BMI≤23.9kg/m^(2),n=75)、B组(23.9kg/m^(2)0.05);两位医师对肺部不同层面图像质量(IQS)评分进行评价,Kappa一致性非常好(Kappa值=0.768、0.812、0.861);三组肺部不同层面IQS评分对比,差异无统计学意义(P>0.05);三组肺部不同层面CT对比,差异有统计学意义,且随着BMI增加而下降(P<0.05),三组肺部不同层面图像标准差(SD)值对比,差异无统计学意义(P>0.05);三组容积CT剂量指数(CTDIvol)对比,差异无统计学意义(P>0.05);A组DLP、ED均低于B、C组,B组DLP、ED低于C组(P<0.05)。结论:不同BMI患者应用3D smart mA调控技术,在保证图像质量的前提下,可有效降低辐射剂量。

ODS MA754合金传热界面接触热阻实验研究

鉴于ODS MA754合金传热界面的接触热阻参数对全固态堆芯空间反应堆系统的热量导出具有重要影响,研发和设计了高温高压接触热阻实验装置,测量了不同温度(20~800℃)、压力(0~80 MPa)、气体氛围(He、CO_(2))以及试件表面粗糙度(1.6、3.2μm)下ODS MA754合金传热界面的接触热阻,并基于测试获得的宽量程数据点,建立了ODS MA754合金的接触热阻数据库。实验结果表明:随着接触面温度和压力的升高,界面接触热阻降低,且热阻降低的速率逐渐减小;相较于表面粗糙度为1.6μm的试件,粗糙度为3.2μm试件表面的界面接触热阻明显偏大,实验得到的定量关系可为工程样件的加工粗糙度要求提供依据;He气氛下的接触热阻远小于CO_(2)气氛,在0.1 MPa、100℃工况下,He气氛接触热阻约为CO_(2)气氛接触热阻的1/4。该研究结果可为空间反应堆的热工设计提供数据参考。

肠道微生物与细菌性肺炎易感性的因果关系:双样本双向孟德尔随机化研究及cML-MA的应用

目的通过孟德尔随机化研究方法探究肠道菌群与细菌性肺炎易感性之间的因果关系。方法使用三种不同的孟德尔随机化分析方法,对211个肠道菌群类群与细菌性肺炎之间的关系进行211次双样本分析,并进行反向孟德尔随机化分析。以随机效应逆方差加权法(IVW)作为主要结果,并采用其他方法作为补充参考。结果柔膜菌纲(OR=1.14,95%CI 1.02~1.27,P=0.02)、放线菌科(OR=1.17,95%CI 1.02~1.35,P=0.03)、放线菌目(OR=1.17,95%CI 1.01~1.35,P=0.03)以及软壁菌门(OR=1.14,95%CI 1.02~1.27,P=0.02)的丰度升高与细菌性肺炎易感性的增加有关;消化球菌科(OR=0.88,95%CI 0.78~0.98,P=0.02)、直肠拟梭菌群(OR=0.85,95%CI 0.75~0.97,P=0.02)和鞘螺菌科UCG001(OR=0.90,95%CI 0.83~0.99,P=0.03)的丰度升高与细菌性肺炎的发病风险降低相关。一系列敏感性分析以及条件孟德尔随机化分析(cML-MA)的结果表示该研究结果可靠。反向孟德尔随机化未发现反向因果关联。结论肠道微生物的丰度升高与细菌性肺炎的易感性增加或降低相关,肠道菌群在细菌性肺炎发病机制中有重要作用,提供了潜在干预措施的新思路。

基于可聚合PVSS和联盟链的密钥可公开验证MA-CP-ABE方案

针对基于门限的多机构密文策略属性基加密(MA-CP-ABE)存在属性颁发机构(AA)不可信、属性私钥正确性无法公开验证等问题,提出了一种基于可聚合PVSS和联盟链的密钥可公开验证MA-CP-ABE方案。基于ElGamal改进可聚合PVSS算法,实现系统主密钥分发的可公开验证;基于双线性映射和ElGamal加密,构造MA-CP-ABE属性私钥可公开验证方法,实现属性私钥及其子份额密文条件下的可公开验证;基于联盟链提出密钥可公开验证MA-CP-ABE方案,通过联盟链保证验证参数可信,通过智能合约实现自动化验证。正确性、机密性、鲁棒性和活性等分析表明,当总AA数量为n、门限值为t、恶意AA数量不超过t-1时,所提方案能够保证属性私钥的正确分发,且系统主密钥初始化的通信开销复杂度为O(tn)。

空间结构模型优化的弹性参数FFT-MA随机建模

快速傅里叶变换滑动平均(FFT-MA)法是一种灵活高效的随机建模方法,在地下介质高分辨率建模、复杂介质非平稳建模和不确定性评价等方面具有重要的应用价值。准确构建空间结构模型是利用FFT-MA方法生成合理的随机模型的关键。然而,以往对FFT-MA方法的研究并未提出准确构建空间结构模型的有效方法。为此,文中提出了一种有效的空间结构模型估计方法。该方法基于反演思想,通过最小化随机模型与测井数据和地震数据的空间结构差异,分别估计空间结构模型的纵向自相关长度和横向自相关长度。同时,为了优化空间结构模型的估计效果,在纵向自相关长度的反演过程中引入边界保护正则化,以提高反演的稳定性。此外,将地震约束引入模型优选以提高随机模型的稳定性。实验结果表明:该方法能够稳定估计地下介质的非平稳空间结构模型,从而建立准确描述复杂储层非平稳空间相关特征的高分辨率随机模型。与基于序贯高斯协模拟的随机建模方法相比,使用空间结构模型优化的FFT-MA随机建模方法能够有效刻画多种复杂地质构造从而实现复杂储层建模。

电弧加热高焓风洞Ma=10 AGARD-B标模测力试验

高超声速设备的试验能力对高超声速技术的发展至关重要,目前受制于加热器技术,常规高超声速风洞能够模拟的最高Mach数不超过10。电弧加热器是高焓风洞的重要设备,将电弧加热高焓风洞用于常规气动力试验,为提高试验模拟Mach数开辟了新的方向。介绍了中国航天空气动力技术研究院1.2 m电弧加热高焓风洞进行的AGARD-B标模试验,通过多次标模测力试验结果的标准差,检验了风洞试验数据的重复性和流场稳定性,通过和国内外已有风洞试验数据的对比分析,检验了风洞试验数据的准确性,为后续该电弧加热高焓风洞承接Mach数10的气动力试验提供强有力的技术支撑。

烟草果胶和纤维素含量^(13)C MultiCP/MAS NMR同时测量

果胶和纤维素是烟草细胞壁的重要组成成分,其含量对烟草品质与安全性产生重要影响。传统分析方法难以实现果胶和纤维素的同时定量。本文在优化核磁共振波谱序列条件的基础上,采用固体^(13)C多重交叉极化/魔角旋转核磁共振波谱分析技术(^(13)C MultiCP/MAS NMR)建立了烟草果胶和纤维素含量的同时测量新方法。方法以聚半乳糖醛酸和微晶纤维素为标准物质,以3-(三甲基甲硅烷基)丙酸-d4钠盐(TMSP)做为内标物质,分别建立内标法标准曲线,相关系数R2为0.999 0和0.998 2。果胶测量的检出限和定量限分别为0.38和1.28 mg·g^(–1),精密度(RSD,n=5)小于3.05%。纤维素测量的检出限和定量限为1.01和3.32 mg·g^(–1),精密度(RSD,n=5)小于2.74%。应用本方法测量烟梗、烟草薄片和烟叶等不同类型样品中的果胶和纤维素含量,并对比烟草行业标准方法的测量结果,果胶含量的相对误差在-0.95%至4.51%之间,纤维素含量的相对误差在0.77%至2.46%之间。表明^(13)C MultiCP/MAS NMR方法快速,准确,适合批量样品的分析测量,为果胶和纤维素等细胞壁类大分子的同时定量分析提供重要技术支持。

Morphological and Molecular Identification of Fungi Associated with Sesame Diseased Plants of the Three Agroclimatic Zones of Burkina Faso

Sesame is Burkina Faso’s second essential agricultural export after cotton. It’s consequently a supply of income for producers and foreign exchange for the country. However, sesame production is characterized by low average yields of about 538 kg·ha-1 at the farmer’s field as compared to the potential yield of the improved varieties (1500 - 2000 kg·ha-1). Fungal diseases are some of the major constraints to sesame production in Burkina Faso. The present study contributes to the development of means to control pathogenic fungi of this crop, which are responsible for significant losses. The objective is to identify the fungi associated with diseased sesame plant samples. To this end, 149 samples of diseased sesame plants were collected from different production sites located in three agro-climatic zones of the country. The analysis of the samples according to the blotting paper method, based on the morphological characteristics of the fungi, allowed the identification of 18 genera with prevalence rates from 2.68% to 97.98%. The most frequently identified genera were Macrophomina (97.98%), Cercospora (86.57%), Fusarium (85.23%), Phoma (62.41%) and Colletotrichum (61.07%). The results also showed a variable distribution of fungi according to the agro-climatic zone with the predominance of Macrophomina in all three zones. Molecular identification by DNA sequencing of 120 isolates belonging to the different fungi detected allowed the identification of 25 species of which the most representative were Macrophomina phaseolina, Cercospora sesami, Corynespora cassiicola, Alternaria simsimi, Alternaria porri, Fusarium oxysporum, F. fujikuroi, F. equiseti, Colletotrichum capsici, and C. gloesporiodes. The present study showed that diseased sesame plants collected from different production sites in Burkina Faso housed several species of fungi. The fungi presence in diseased plants indicates the need to inform and raise the stakeholders’ awareness about the phytosanitary problems of sesame, but also to develop effective and appropriate control methods against these crop pathogens in Burkina Faso.

Sm_(2)O_(3)加入量和热处理温度对CA_(6)-MA材料性能的影响

为提高CA_(6)-MA(六铝酸钙-镁铝尖晶石)的性能,以CaO、MgO、Al_(2)O_(3)和Sm_(2)O_(3)为原料,通过高温固相烧结法制备CA_(6)-MA复合材料,研究了Sm_(2)O_(3)加入量(外加质量分数分别为0、2%、4%、6%)和热处理温度(1400、1500、1600℃)对CA_(6)-MA复合材料物相组成、显气孔率、体积密度、常温抗折强度和显微结构的影响。结果表明:1)适当提高热处理温度,可促进CA_(6)合成反应,热处理温度为1600℃时,试样中只有CA_(6)和MA;2)Sm_(2)O_(3)的引入促进了MA的晶体发育,CA_(6)趋向等轴晶型转变,显著提高试样的致密度;3)添加6%(w)Sm_(2)O_(3)的试样经1600℃热处理后综合性能最佳,其体积密度为3.26 g·cm^(-3),显气孔率为13.4%,常温抗折强度为135 MPa。

Morphological Identification of the Main Fungi Associated with Sesame in Burkina Faso

Several fungal species are responsible for diseases that damage sesame crop and cause production losses. These seed-borne fungi cause serious damage by reducing seed germination. To identify the fungi associated with sesame seeds in Burkina Faso, 72 sesame seed samples were collected from 24 localities in the main production areas (Sudanian zone, Sudano-Sahelian zone, Sahelian zone). These samples were submitted for seed health analysis using the blotting paper incubation method. The results obtained revealed that the seed samples were contaminated by various fungi, the main ones being: Fusarium spp. Link: Fr. infecting 97.22% of the samples, Macrophomina phaseolina (Tassi) Goid. (90.28%), Alternaria sesamicola E. Kawamura (83.33%), Curvularia lunata (Wakker) Boedijn (76.39%), Cercospora sesami A. Zimmerm. (73.61%), Phoma sorghina Boerema, Dorenbosch, & Van Kesteren (73.61%), Aspergillus flavus Link: Fr. (69.44%), Cladosporium sphaerospermum Penz. (56.94%), Rhizopus sp. Ehrenb. (40.28%) and A. niger Tiegh. (36.11%). In each seed sample, 0.25% to 94% of the seeds host one or more fungal species. Regarding the climatic zones, the results revealed that A. sesamicola and A. flavus were more represented in the Sudanian zone than in the Sudano-Sahelian and Sahelian zones;while P. sorghina, and C. sphaerospermum were more encountered in the Sahelian zone than in the other two zones. This study showed that the majority of sesame seeds produced and used by farmers in Burkina Faso host one or more species of fungi at high levels.

抗奥合剂通过p38 MAPK/NF-κB信号通路和ACE2/Ang1-7/Mas轴缓解急性肺损伤研究

目的探讨抗奥合剂(KAHJ)治疗小鼠急性肺损伤(ALI)的作用及机制,为其可能作为缓解新型冠状病毒(COVID-19)感染后症状的药物提供依据。方法采用网络药理学方法预测KAHJ治疗ALI的主要活性成分、潜在靶点和相关信号通路。将C57BL/6J小鼠随机分为对照组、LPS组和LPS+KAHJ组。LPS+KAHJ组小鼠灌胃KAHJ(4.76 g·kg^(-1)·d^(-1),8.8 mL·kg^(-1)·d^(-1)),其余组小鼠灌胃生理盐水(8.8 mL·kg^(-1)·d^(-1))。14 d后,腹腔注射LPS(5 mg·kg^(-1))诱导ALI模型。收集小鼠血清和肺组织,通过组织病理学观察肺组织的病理变化。采用Western blot、qPCR、ELISA和IHC等方法评估KAHJ对ALI的改善作用。结果通过网络药理学筛选出疾病和药物共同的70个核心靶基因,并显示与多个信号通路密切相关,如MAPK、NF-κB、Apoptosis、COVID-19和肾素-血管紧张素系统(Ras)信号通路等。此外,通过实验验证发现KAHJ能改善小鼠ALI后的炎症和细胞凋亡,减少肺损伤和肺水肿,抑制肺纤维化。同时,KAHJ的作用机制与p38 MAPK和NF-κB的磷酸化以及ACE2/Ang1-7/Mas轴的调控也有着密切关系。结论KAHJ可能通过抑制p38 MAPK/NF-κB信号通路和调控ACE2/Ang1-7/Mas轴缓解ALI,为缓解COVID-19感染后症状提供了补充和替代药物。

MA-2吸收剂在国能锦界电厂15万t/a碳捕集装置上的应用研究

由中石化南京化工研究院开发的MA系列(用于低分压碳捕集)吸收剂已经在国内近10套万吨级碳捕集示范装置上成功运行。较为详细地讨论了该系列中MA-2吸收剂在国能锦界电厂15万t/a碳捕集装置上的运行情况,在设计进气量条件下,考察了气液比、捕集率等因素对再生能耗的影响并确定了较优值分别为34 m3/m3及95.2%,对应再生能耗最低为2.72 GJ/t。在上述条件下又逐步考察半富液级间冷却、富液分流、贫液MVR等节能工艺对再生能耗的影响并确定较优值,即当富液分流比为5%,级间冷却为40℃,MVR压差为50 kPa时,装置再生能耗最低仅为2.30 GJ/t。考察了不同工况下MA-2吸收剂的逃逸情况为31~59 mg/m3。

胶粉/SEBS-g-MA共混比对复合材料粘弹行为的影响

研究了胶粉/SEBS-g-MA共混比对胶粉/SEBS-g-MA复合材料力学性能和粘弹行为的影响。结果表明:当共混比为60/40时,复合材料的力学性能最佳;随着胶粉用量的增加,应力松弛程度增大,随着热处理温度的升高,应力松弛可逆恢复程度先减小后增大;Mullins效应随着温度的升高逐渐减弱。

Analysis of flavor and widely metabolomics differences in black sesame before and after processing

The objective of this study was to determine the differences of aroma and taste in three black sesame originsbefore and after processing via flavor and widely metabolomics.By analyzing the sensory characteristics and metabolites of raw and treated black sesame from China,Vietnam,and Myanmar,treated Chinese sesame have the most significant change in hardness after thermal processing,low viscosity and was easy to chew.The electronic nose could distinguish between raw and treated sesame due to the aroma distribution.The reason of treated sesame from China was“fragrant”is due to the highest content(2545.50μg/kg)of total pyrazines including 2,5-dimethylpyrazine,2-ethyl-5-methylpyrazine,2,3,5-trimethylpyrazine,3-ethyl-2,5-dimethylpyrazine.933 metabolites were detected via a wide targeted metabolomics in the taste of raw and treated sesame.Based on the analysis of metabolites related to bitterness,145 substances were selected.The main bitter contributors may be amino acids,dipeptides and organic acids.

Effect of defatted flaxseed gum powder addition on the quality of sesame paste

The study explored the influence of defatted flaxseed gum powder(DFGP) on the stability and quality of sesame paste by measuring and analyzing its composition, color, texture, particle size, centrifugal oil separation rate,rheological properties, and microstructure. The results showed that the moisture and polysaccharide content of sesame paste was increased as the DFGP increased. Additionally, the hardness, gumminess, and chewiness of the sesame paste was improved, while the presence of particles with small particle size(1–100 μm) was decreased.The rate of oil precipitation was reduced by 28.99% when the amount of DFGP was 6%. The sesame paste samples exhibited pseudoplastic behavior, demonstrating shear thinning. As the shear rate increased, the apparent viscosity of sesame paste gradually decreased. Both the storage modulus(G’) and the loss modulus(G’’) increased as the shear frequency increased. The microstructure observation revealed that protein and oil were evenly distributed in the sesame paste system, and the addition of DFGP enhanced the bonding between oil and protein.This study can provide valuable references for high-quality sesame paste products in the food industry.

基于Noradamantane的高能量密度富氮笼型含能分子设计与性能预估

研究提出一种通过化学键键能差进行能量密度快速估算的方法,和一种利用拉普拉斯键级和分子片段键离解能相结合快速判断笼型结构稳定性的方法。通过穷举法构建了基于Noradamantane的所有富氮骨架及其435种硝基衍生物,应用上述计算方法筛选兼具高能量密度和稳定性的分子结构,并采用量子化学能量计算和过渡态反应势垒计算验证筛选结果的可靠性。计算发现了两种兼顾高能量密度和结构稳定性的硝基化合物,其爆热、爆速、爆压和金属加速能力的理论计算最大值分别达到7.77 k J·g^(-1)、10.1 km·s^(-1)、47 GPa和1.14倍HMX的金属加速能力,且结构分解反应势垒≥96 k J·mol^(-1)。本研究所建立的含能分子能量密度和稳定性快速筛选方法,可为高能稳定的含能分子设计提供参考。

Deletion of a 1,049 bp sequence from the 5′UTR upstream of the SiHEC3 gene induces a seed non-shattering mutation in sesame

Sesame is a labor intensive crop with limited mechanized harvesting mainly due to the seed shattering(SS)trait.In this study,we performed a genetic analysis of the seed-shattering resistance(SR)trait with a SR sesame mutant 12M07.Unlike the SS type,the parenchyma cells in the abscission zone of the 12M07 mutant are arranged loosely but adhere to the seed coat.Inheritance analysis of six generations derived from 12M07(SR)×Xiangcheng Dazibai(SS)showed that the SR trait is recessive and controlled by a single gene pair.Association mapping of the F2population with 888,619 variants(single-nucleotide polymorphisms(SNPs)and insertion-deletion(InDels))and 31,884 structural variations(SVs)determined that only SV12002 in the 5′upstream region of gene Sindi0765000(named SiHEC3)in Chr.3 was significantly associated with the SR trait.SiHEC3 encodes the bHLH transcription factor.A 1,049 bp deletion occurred in the 5′UTR of Sihec3 in 12M07.SiHEC3 is mainly expressed in developing placental tissues,with the expression peaking in capsules at 45 days after pollination.A dual-luciferase reporter assay in tobacco confirmed that the promoter activity of Sihec3 was reduced because of the deletion of the 1,049 bp promoter sequence.Protein–protein interaction network analysis showed that HEC3 is co-expressed with nine key proteins,such as SHATTERPROOF1(SHP1)and SEEDSTICK(STK)which participate in the secondary wall biosynthesis of the abscission layer in plants.The findings of this study show the important function of Sihec3corresponding with the SR trait and supply the genetic information for breeding new varieties that are amenable to mechanized harvesting in sesame and other crops.

Reinforcement Learning-Based MAS Interception in Antagonistic Environments

Dear Editor, As a promising multi-agent systems(MASs) operation, autonomous interception has attracted more and more attentions in these years, where defenders prevent intruders from reaching destinations.So far, most of the relevant methods are applied in ideal environments without agent damages. As a remedy, this letter proposes a more realistic interception method for MASs suffered by damages.

基于SPR-MS联合法鉴定Mas的互作蛋白

目的基于表面等离子共振(SPR)和质谱(MS)的联用技术从细胞裂解液中鉴定Mas互作蛋白。方法将重组蛋白GST-Mas-CT和GST分别高水平固定在2张CM5芯片的4个通道上,将细胞裂解液(总蛋白质量浓度0.5 mg·mL-1)注入芯片表面,回收蛋白经超滤辅助样品制备(FASP)后,进行MS鉴定。使用韦恩图分析Mas-CT和GST的差异互作蛋白,利用DAVID数据库对Mas-CT的差异互作蛋白进行GO和KEGG分析。结果回收蛋白中共有785个Mas-CT的差异互作蛋白;生物信息学分析显示Mas互作蛋白主要富集在免疫反应、钙离子应答、感染、血小板激活等生物学过程或通路。结论SPR-MS联合法适用于从细胞裂解液等复杂体系中捕获和鉴定靶蛋白的互作蛋白。

Assessment of molecular markers and marker-assisted selection for drought tolerance in barley(Hordeum vulgare L.)

This review updates the present status of the field of molecular markers and marker-assisted selection(MAS),using the example of drought tolerance in barley.The accuracy of selected quantitative trait loci(QTLs),candidate genes and suggested markers was assessed in the barley genome cv.Morex.Six common strategies are described for molecular marker development,candidate gene identification and verification,and their possible applications in MAS to improve the grain yield and yield components in barley under drought stress.These strategies are based on the following five principles:(1)Molecular markers are designated as genomic‘tags’,and their‘prediction’is strongly dependent on their distance from a candidate gene on genetic or physical maps;(2)plants react differently under favourable and stressful conditions or depending on their stage of development;(3)each candidate gene must be verified by confirming its expression in the relevant conditions,e.g.,drought;(4)the molecular marker identified must be validated for MAS for tolerance to drought stress and improved grain yield;and(5)the small number of molecular markers realized for MAS in breeding,from among the many studies targeting candidate genes,can be explained by the complex nature of drought stress,and multiple stress-responsive genes in each barley genotype that are expressed differentially depending on many other factors.