The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes（M 〉 7）. The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fau...The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes（M 〉 7）. The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fault and depend on the structure of the upper crust as well as the pre-existing tectonics. Therefore, the most recent co-seismic surface ruptures along the Garzê–Yushu fault zone（Dangjiang segment） reveal the surface deformation of the central Tibetan Plateau. Remote sensing images and field investigations suggest a 85 km long surface rupture zone（striking NW-NWW）, less than 50 m wide, defined by discontinuous fault scarps, right-stepping en echelon tensional cracks and left-stepping mole tracks that point to a left-lateral strike-slip fault. The gullies that cross fault scarps record systematic left-lateral offsets of 1.8 m to 5.0 m owing to the most recent earthquake, with moment magnitude of about M 7.5, in the Dangjiang segment. Geological and geomorphological features suggest that the spatial distribution of the 1738 co-seismic surface rupture zone was controlled by the pre-existing active Garzê–Yushu fault zone（Dangjiang segment）. We confirm that the Garzê–Yushu fault zone, a boundary between the Bayan Har Block to the north and the Qiangtang Block to the south, accommodates the eastward extrusion of the Tibetan Plateau and generates strong earthquakes that release the strain energy owing to the relative motion between the Bayan Har and Qiangtang Blocks.展开更多
Yushu Ms7.1 earthquake occurred on the Ganzi-Yushu fault zone, across which we carried out a joint relative-gravity and seismic-reflection survey, and then performed a gravity inversion constrained by the seismic-refl...Yushu Ms7.1 earthquake occurred on the Ganzi-Yushu fault zone, across which we carried out a joint relative-gravity and seismic-reflection survey, and then performed a gravity inversion constrained by the seismic-reflection result. Based on the data of complete Bouguer gravity anomaly and seismic reflection, we obtained a layered interface structure in deep crust down to Moho. Our study showed that the inversion could reveal the interfaces of strata along the survey profile and the directions of regional faults in two-dimension. From the characteristics of the observed topography of the Moho basement, we tentatively confirmed that the uplift of eastern edge of Qinghai-Tibet plateau was caused by the subduetion of the Indian plate.展开更多
As revealed by field investigations,the co-seismic surface rupture zone of the 2010 MS7.1 Yushu earthquake,Qinghai is a characteristic sinistral strike-slip feature consisting of three distinct sinistral primary ruptu...As revealed by field investigations,the co-seismic surface rupture zone of the 2010 MS7.1 Yushu earthquake,Qinghai is a characteristic sinistral strike-slip feature consisting of three distinct sinistral primary ruptures,with an overall strike of 310°-320° and a total length of 31 km.In addition,an approximately 2-km-long en-echelon tensile fissure zone was found east of Longbao Town;if this site is taken as the north end of the rupture zone,then the rupture had a total length of ～51 km.The surface rupture zone is composed of a series of fissures arranged in an en-echelon or alternating relationship between compressive bulges and tensile fissures,with a measured maximum horizontal displacement of 1.8 m.The surface rupture zone extends along the mapped Garzê-Yushu Fault,which implicates it as the seismogenic fault for this earthquake.Historically,a few earthquakes with a magnitude of about 7 have occurred along the fault,and additionally traces of paleoearthquakes are evident that characterize the short-period recurrence interval of large earthquakes here.Similar to the seismogenic process of the 2008 Wenchuan earthquake,the Yushu earthquake is also due to the stress accumulation and release on the block boundaries resulting from the eastward expansion of Qinghai-Tibet Plateau.However,in contrast with the Wenchuan earthquake,the Yushu earthquake had a sinistral strike-slip mechanism resulting from the uneven eastward extrusion of the Baryan Har and Sichuan-Yunnan fault blocks.展开更多
A gravity survey was conducted one month after the 2010 Yushu earthquake in the epicenter area. The cross-fauh survey line was 500 km long, from Langqian county to Qingshuihe county, in a transition zone between Bayan...A gravity survey was conducted one month after the 2010 Yushu earthquake in the epicenter area. The cross-fauh survey line was 500 km long, from Langqian county to Qingshuihe county, in a transition zone between Bayan Har block and Qiangtang block, in an area of high elevation, large undulating terrain, and complex geological features. An interpretation of the data was carried out together with other kinds of data, such as seismic exploration and magnetic exploration. The result shows that gravity is sensitive to fault bounda- ry ; the geologic structure of the region is complex at middle and upper depths, and the density profile reveals an eastward-pushing fault movement.展开更多
Co-seismic ground-surface deformation of the Yushu earthquake on April 14, 2010 is studied on the basis of interferometry principle by using InSAR images from ALOS PALSAR and ENVISAT ASAR pairs. The observed maximum l...Co-seismic ground-surface deformation of the Yushu earthquake on April 14, 2010 is studied on the basis of interferometry principle by using InSAR images from ALOS PALSAR and ENVISAT ASAR pairs. The observed maximum line-of-sight displacement is 54 cm, which is equivalent to a sinistral strike slip of 180 cm on the surface. The location of macro-epicenter is very close to the epicenter determined by in situ investigation, suggesting that InSAR is an ideal tool for quick identification of the macro-epicenter, and thus for timely disaster assessment after a destructive earthquake.展开更多
基金supported by the China Earthquake Administration Research Fund(Grant No.DZJ2016-18)the National Natural Science Foundation of China(Grant No.41602222)
文摘The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes（M 〉 7）. The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fault and depend on the structure of the upper crust as well as the pre-existing tectonics. Therefore, the most recent co-seismic surface ruptures along the Garzê–Yushu fault zone（Dangjiang segment） reveal the surface deformation of the central Tibetan Plateau. Remote sensing images and field investigations suggest a 85 km long surface rupture zone（striking NW-NWW）, less than 50 m wide, defined by discontinuous fault scarps, right-stepping en echelon tensional cracks and left-stepping mole tracks that point to a left-lateral strike-slip fault. The gullies that cross fault scarps record systematic left-lateral offsets of 1.8 m to 5.0 m owing to the most recent earthquake, with moment magnitude of about M 7.5, in the Dangjiang segment. Geological and geomorphological features suggest that the spatial distribution of the 1738 co-seismic surface rupture zone was controlled by the pre-existing active Garzê–Yushu fault zone（Dangjiang segment）. We confirm that the Garzê–Yushu fault zone, a boundary between the Bayan Har Block to the north and the Qiangtang Block to the south, accommodates the eastward extrusion of the Tibetan Plateau and generates strong earthquakes that release the strain energy owing to the relative motion between the Bayan Har and Qiangtang Blocks.
基金supported by the Key Foundation of Institute of Seismology,China Earthquake Administration( IS200916004)
文摘Yushu Ms7.1 earthquake occurred on the Ganzi-Yushu fault zone, across which we carried out a joint relative-gravity and seismic-reflection survey, and then performed a gravity inversion constrained by the seismic-reflection result. Based on the data of complete Bouguer gravity anomaly and seismic reflection, we obtained a layered interface structure in deep crust down to Moho. Our study showed that the inversion could reveal the interfaces of strata along the survey profile and the directions of regional faults in two-dimension. From the characteristics of the observed topography of the Moho basement, we tentatively confirmed that the uplift of eastern edge of Qinghai-Tibet plateau was caused by the subduetion of the Indian plate.
基金supported by the management and other functions of the Institute of Geology,CEA
文摘As revealed by field investigations,the co-seismic surface rupture zone of the 2010 MS7.1 Yushu earthquake,Qinghai is a characteristic sinistral strike-slip feature consisting of three distinct sinistral primary ruptures,with an overall strike of 310°-320° and a total length of 31 km.In addition,an approximately 2-km-long en-echelon tensile fissure zone was found east of Longbao Town;if this site is taken as the north end of the rupture zone,then the rupture had a total length of ～51 km.The surface rupture zone is composed of a series of fissures arranged in an en-echelon or alternating relationship between compressive bulges and tensile fissures,with a measured maximum horizontal displacement of 1.8 m.The surface rupture zone extends along the mapped Garzê-Yushu Fault,which implicates it as the seismogenic fault for this earthquake.Historically,a few earthquakes with a magnitude of about 7 have occurred along the fault,and additionally traces of paleoearthquakes are evident that characterize the short-period recurrence interval of large earthquakes here.Similar to the seismogenic process of the 2008 Wenchuan earthquake,the Yushu earthquake is also due to the stress accumulation and release on the block boundaries resulting from the eastward expansion of Qinghai-Tibet Plateau.However,in contrast with the Wenchuan earthquake,the Yushu earthquake had a sinistral strike-slip mechanism resulting from the uneven eastward extrusion of the Baryan Har and Sichuan-Yunnan fault blocks.
基金supported by the Key Director Foundation Project,Institute of Seismology,CEA(IS200916004)
文摘A gravity survey was conducted one month after the 2010 Yushu earthquake in the epicenter area. The cross-fauh survey line was 500 km long, from Langqian county to Qingshuihe county, in a transition zone between Bayan Har block and Qiangtang block, in an area of high elevation, large undulating terrain, and complex geological features. An interpretation of the data was carried out together with other kinds of data, such as seismic exploration and magnetic exploration. The result shows that gravity is sensitive to fault bounda- ry ; the geologic structure of the region is complex at middle and upper depths, and the density profile reveals an eastward-pushing fault movement.
基金supported by National Natural Science Foundation of China( 41004008) Key Foundation of Institute of Seismology China Earthquake Administration ( IS201026019) +3 种基金State Key Laboratory of Cryo-spheric Sciences,Cold and Arid Regions Environment and Engineering Research Institute,Chinese Academy of Sciences ( SKL CS09 - 03) the Foundation of State Key Laboratory of Water Resources and Hydropower Engineering Science,Wuhan University( 2009B54) the Foundation of Institute of Seismology China Earthquake Administration( IS200826057 ) National Key Technology R&D Program of China( 2008BAC35B04 -5)
文摘Co-seismic ground-surface deformation of the Yushu earthquake on April 14, 2010 is studied on the basis of interferometry principle by using InSAR images from ALOS PALSAR and ENVISAT ASAR pairs. The observed maximum line-of-sight displacement is 54 cm, which is equivalent to a sinistral strike slip of 180 cm on the surface. The location of macro-epicenter is very close to the epicenter determined by in situ investigation, suggesting that InSAR is an ideal tool for quick identification of the macro-epicenter, and thus for timely disaster assessment after a destructive earthquake.
