Seismic Behavior of Specially Shaped Column Joints with X-Shaped Reinforcement

To investigate the seismic behavior of specially shaped column joints with X-shaped reinforcement,two groups of specimens with or without X-shaped reinforcement in joint core region were tested under constant axial compression load and low reversed cyclic loading,which imitated low to moderate earthquake force.The seismic behavior of specially shaped column joints with X-shaped reinforcement in terms of bearing capacity,displacement,ductility,hysteretic curve,stiffness degradation and energy dissipation was studied and compared to that without Xshaped reinforcement in joint core region.With the damage estimation model,the accumulated damage was analyzed.The shearing capacity formula of specially shaped column joints reinforced by X-shaped reinforcement was proposed with a simple form.The test results show that X-shaped reinforcement is an effective measure for improving the seismic behavior of specially shaped column joints including deformation behavior,ductility and hysteretic characteristic.All specimens were damaged with gradual stiffness degeneration.In addition,X-shaped reinforcement in the joint core region is an effective way to lighten the degree of cumulated damage.The good seismic performance obtained from the specially shaped column joint with X-shaped reinforcement can be used in engineering applications.The test value is higher than the calculated value,which indicates that the formula is safe for the design of specially shaped column joints.

基于CTM和Beam-Column Joint Element的梁柱节点核心区抗剪仿真

为研究基于CTM和Beam-Column Joint Element单元的钢筋混凝土梁柱节点核心区抗震仿真计算,本文先分析了CTM的计算原理和局限性,并对原计算模型进行调整;之后通过试验数据验证了调整前后模型的正确性,并通过参数分析得出调整前后CTM在不同参数下核心区抗剪强度的变化规律;最后通过对比理论计算与试验下核心区抗剪强度变化规律,证明调整后模型更为准确。

Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

Rapid Repair of Earthquake Damaged RC Interior Beam-wide Column Joints and Beam-wall Joints Using FRP Composites

This paper studies the seismic performance of FRP-strengthened RC interior non-seismically detailed beam-wide columns and beam-wall joints after limited seismic damage.Four eccentric and concentric beam-wide column joints and two beam-wall joints,initially damaged in a previous study,were repaired and tested under constant axial loads(0.1fc′Ag and 0.35fc′Ag) and lateral cyclic loading.The rapid repair technique developed,aimed to restore the original strength and to provide minimum drift capacity.The repair schemes were characterized by the use of:(a) epoxy injections and polymer modified cementitious mortar to seal the cracks and replace spalled concrete;and(b) glass(GFRP) and carbon(CFRP) sheets to enhance the joint performance.The FRP sheets were effectively prevented against possible debonding through the use of fiber anchors.Comparison between responses of specimens before and after repair clearly indicated reasonable restoration in strength,drift capacity,stiffness and cumulative energy dissipation capacity.All specimens failed with delamination of FRP sheets at beam-column joint interfaces.The rapid repair technique developed in this study is recommended for mass upgrading or repair of earthquake damaged beam-column joints.

Experimental Study on Seismic Behavior of Exterior Joints of Special-shaped Columns with Different Lengths of Limbs

Four exterior joints with special-shaped columns which have different lengths of limbs are tested under low cyclic loading. Speeial-shaped columns adopted are L- and T-shaped in section. It can be concluded that crack pattern, failure mode and shear strength of joints are affected by the length of limb, and that shear strength and ductility increase with the length of limb; the joints with the flexural failure of the beam have better seismic behavior than those with the shear failure of the joint core.

Seismic Behavior of Confined RC ColumnComposite Beam Joints

In order to evaluate the seismic behavior of confined RC column-composite beam joints, five interior joints were tested under low cyclic reversed load. The weakening extent of flanges, the number of studs, and whether to reinforce weakened flanges were used as parameters in designing these five joints. Failure characteristics, hysteretic curves, skeleton curves, ductility, energy dissipation, strength degradation, and stiffness degradation were analyzed. The test results revealed that the steel beam flanges in the joints were equivalent to the tie rod. Weakened flanges resulted in poor seismic behavior; however, the seismic behavior could be improved by increasing studs and reinforcing weakened flanges. The joint steel plate hoops, equivalent to stirrups, did not yield when the maximum load was reached, but yielded when the failure load was reached for the joints with shear failure. Increasing stud-type joints and reinforcing flange-type joints ensured good seismic behavior and met project requirements. Based on the experimental results, the failure mechanism of the joints was discussed, and the shear capacity equations of the joints was presented.

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.

Seismic Behavor of RC Beam-Column Joint with Additional Bars under Cyclic Loading

The behavior of Beam-Column Joints in moment resisting frame structures are susceptible to damage caused by seismic effects due to poor performance of the joint.A good number of researches were carried out to understand the complex mechanism of RC joints which are considered in seismic design code practices presently adopted.The traditional construction detailing of transverse reinforcement have shown serious joint failure. This paper introduces a new design philosophy involving the use of additional diagonal bars within the joint particularly suitable for low to medium seismic effects in earthquake zones throughout the world.In lieu to this study,ten(10) full-scale interior beam-column specimens were constructed with various additional reinforcement details and configurations as will be discussed in the later.The experiment provided adequate results to proof the idea of additional bars as suitable approach in reinforced concrete structures where earthquake is eminent.While compared with overall cracking observation during the test,the specimen with additional bars (diagonal and straight) had shown few cracks on the column than the ones without.Furthermore,concrete confinement is certainly an important design method as recommended by certain international codes.

Investigation of long-wavelength elastic wave propagation through wet bentonite-filled rock joints

The saturation of the compacted bentonite buffer in the deep geological repository can cause bentonite swelling,intrusion into rock fractures,and erosion.Inevitably,erosion and subsequent bentonite mass loss due to groundwater inflow can aggravate the overall integrity of the engineered barrier system.Therefore,the coupled hydro-mechanical interaction between the buffer and rock during groundwater inflow and bentonite intrusion should be evaluated to guarantee the long-term safety of deep geological disposal.This study investigated the effect of bentonite erosion and intrusion on the elastic wave propagation characteristics in jointed rocks using a quasi-static resonant column test.Jointed rock specimens with different joint conditions(i.e.joint surface saturation and bentonite filling)were prepared using granite rock discs sampled from the Korea Underground Research Tunnel(KURT)and Gyeongju bentonite.The long-wavelength longitudinal and shear wave velocities were measured under different normal stress levels.A Hertzian-type power model was used to fit the wave velocities,and the relationship between the two fitted parameters provided the trend of joint conditions.Numerical simulations using three-dimensional distinct element code(3DEC)were conducted to better understand how the long-wavelength wave propagates through wet bentonite-filled rock joints.

Static behavior of semi-rigid thin-walled steel-concrete composite beam-to-column joints with bolted partial-depth flush end plate:experimental study

A new type of semi-rigid thin-walled steel-concrete composite beam-to-column joint has been proposed in this paper.Five semi-rigid composite beam-to-column joint specimens subjected to hogging moments under monotonic loading were tested to study the static behavior of this new type of joint.The main variable parameters for the five joint specimens were the longitudinal reinforcement ratio and the joint type.The experimental results designated that the magnitude of extension of the longitudinal reinforcement is the most important factor that influenced the moment-rotation characteristic of the new type of joint.The concrete slabs could resist 3.8%-19.1% of the total shear load applied to the cross-sections near the beam-to-column connection.The edge stiffened elements,such as the flange of the lipped I-section thin-walled steel beam,were capable of having considerable inelastic deformation capacity although they had comparatively large width-to-thickness ratios.The shear failure of the concrete cantilever edge strip must be taken into account in practical design because it has significant influence on the anchorage of the longitudinal reinforcement in the new type of external joints.

Finite Element Analysis (FEA) for the Beam-Column Joint Subjected to Cyclic Loading Was Performed Using ANSYS

This paper analyses the seismic performance of exterior beam-column joints strengthened with unconventional reinforcement detailing. The beam-column joint specimens were tested with reverse cyclic loading applied at the beam end. The samples were divided into two groups based on the joint reinforcement detailing. The first group (Group A) of three non-ductility specimens had joint detailing in accordance with the construction code of practice in India IS456-2000, and the second group (Group B) of three ductility specimens had joint reinforcement detailed as per IS13920-1993, with similar axial load cases as the first group. The experimental studies are proven with the analytical studies carried out by finite element models using ANSYS. The results show that the hysteresis simulation is satisfactory for both un-strengthened and ferrocement strengthened specimens. Furthermore, when ferrocement strengthening is employed, the strengthened beam-column joints exhibit better structural performance than the un-strengthened specimens of about 31.56% and 38.98 for DD-T1 and DD-T2 respectively. The analytical shear strength predictions were in line with the test results reported in the literature, thus adding confidence to the validity of the proposed models.

Study on Strengthening of RC Beam Column Joint Using Hybrid FRP Composites

Beam-Column joints are critical zones in reinforced concrete structures which are most vulnerable to earthquake forces. Hence strengthening beam-column joint is vital to save the structure and its inhabitants in case of seismic forces. Numerous retrofitting works using fibre reinforced polymer (FRP) composites are being undertaken worldwide. This work aims to investigate the effectiveness of strengthening beam-column joints using natural and artificial fibres. In this study, basalt (natural fibres) as monolithic composite (BFRP) and as hybrid composite along with glass (artificial fibres) were used for strengthening of beam-column joints. Totally six specimens were prepared and tested under monotonic loading. Specimen details used were: two control specimen, two specimens for monolithic wrapping and remaining two specimens for hybrid wrapping. The test results were compared with control and rehabilitated specimens. The performance of the treated joints was studied using the following parameters: initial and ultimate cracking loads, energy absorption, deflection ductility and stiffness at ultimate. From the test results, it was found that the hybrid combination of Basalt and Glass FRPs were found to be more effective in the treatment of beam-column joints. The strong column weak beam concept was achieved by failure in beam portion which helped in preventing the catastrophic failure of the entire structure.

钢筋混凝土板柱节点冲切性能研究进展

为提高板柱节点冲切性能从而促进其工程应用,比较了各类抗冲切元件的不同布置形式、形状尺寸、几何参数以及组合形式对节点抗冲切承载力的影响,概括了受损板柱节点修复与加固的研究现状,梳理了不同开洞尺寸、距离、数量、形状及偏心荷载作用下开洞板柱试件抗冲切性能的研究成果,归纳了有无抗冲切钢筋和配置型钢剪力架板柱节点的抗冲切承载力计算方法以及基于机器学习的板柱节点冲切承载力预测方法。结果表明:各类抗冲切元件可通过改变布置形式、形状尺寸、几何参数以及元件组合从而改善板柱节点的冲切性能;板件开洞的尺寸越大、距离越远、数量越多,对节点的抗冲切性能越不利;基于数值模拟和规范改进得出的冲切承载力计算公式仅对特定试验有较高的预测精度,尚未形成较为统一的承载力计算公式,而基于机器学习的冲切承载力预测模型是未来研究的重点;需进一步开展关于受损板柱节点修复与加固方法的研究,对完善板柱节点抗冲切性能研究理论体系具有重要意义。

配筋PVA-钢混杂纤维增强水泥基复合材料梁柱边节点抗震性能试验研究

改善工程材料韧性和耐久性,提高框架梁柱节点抵抗变形和破坏的能力,是提高框架结构抗震韧性的有效途径之一。采用PVA-钢混杂纤维增强水泥基复合材料代替普通混凝土应用到梁柱边节点,考虑轴压比和加密区体积配箍率的影响,设计6个配筋PVA-钢混杂纤维增强水泥基复合材料、1个配筋单掺PVA纤维增强水泥基复合材料和1个钢筋混凝土梁柱边节点试件进行拟静力试验,分析其破坏形态、滞回曲线、骨架曲线、延性、耗能能力、钢筋应变和梁端塑性铰区转角,探讨混杂纤维的加入对梁柱边节点抗震性能的影响。结果表明:与钢筋混凝土节点和单掺PVA纤维增强水泥基复合材料节点相比,PVA-钢混杂纤维增强水泥基复合材料节点的承载力高、变形能力大、延性好、耗能能力强,抗震性能显著提升。当试验轴压比从0.12增加到0.24,梁端塑性铰区产生一定的外移,塑性性能发挥更充分,同时试件的变形能力、延性、耗能能力增加。在加密区体积配箍率减小的情况下,试件仍表现出良好的抗震性能。

新型钢管混凝土梁柱节点力学性能试验研究

为研究内加强环式圆钢管混凝土柱与矩形钢管混凝土梁这种新型连接节点的力学性能,设计了缩尺钢管混凝土梁柱节点试件,开展了相同梁柱节点试件的静力加载试验和低周往复加载试验。通过研究该节点试件的破坏模式、荷载-位移曲线以及拟静力加载试验的骨架曲线、核心区剪切变形等,分析了节点试件的承载能力、延性和耗能能力,全面考察了同一梁柱节点在静力加载和低周往复加载两种工况下的受力性能和破坏模式。结果表明:钢管混凝土梁柱节点试件核心区强度较强,破坏模式主要为梁端破坏,低周往复加载试验时试件梁柱连接处附近的梁端钢板发生拉裂破坏和钢板鼓曲,静力加载试验时试件梁端焊缝发生拉裂破坏;试件延性较好,加载过程中经历了弹性、弹塑性和塑性发展阶段。最后提出了该类钢管混凝土梁柱节点核心区的抗剪强度计算公式。

新型装配式梁柱节点有限元参数分析

提出了一种装配式梁柱节点新形式,带悬臂梁段的框架柱与框架梁进行拼接,通过L形角钢进行节点加强,形成全螺栓装配式节点。为研究该节点的力学性能,以前期试验作为研究基础,对带悬臂梁段拼接的装配式新型梁柱节点采用ABAQUS软件进行参数分析。首先建立装配式梁柱节点的足尺试验模型,与试验结果进行对比验证;然后,对带悬臂梁段拼接节点进行参数化分析并且考虑加劲肋数量、横板厚度、耳板厚度、L形角钢长度和翼缘螺栓数量的因素,得到不同参数下节点的力学性能。

新型装配式型钢混凝土组合节点非线性分析

通过ABAQUS平台对新型装配式钢混组合节点试件进行有限元建模,基于试验结果,验证了该有限元模型的可靠性,并分析了节点盖板厚度和方钢管宽厚比对节点滞回性能、能量耗散及刚度退化等抗震性能的影响。结果表明:该新型节点具有良好的整体承载力及耗能能力;当增大节点盖板厚度时,试件的承载力、耗能及初始刚度均逐步增大,其峰值弯矩增幅约为17.6%,延性系数呈先增大后降低的变化趋势。当方钢管宽度一定时,节点承载力随着方钢管厚度的增大而增加,最大增幅约15.6%,但方钢管厚度对节点延性影响较小;当方钢管厚度一定时,节点的承载力变化较小,但其延性随着方钢管宽度的增大而增大,最大增幅约为24.2%;同时,方钢管宽厚比对新型节点强度和刚度退化性能的影响较为稳定。

单边螺栓T型钢连接梁柱节点地震损伤性能评估

随着装配式钢结构在建筑工程领域的应用日益广泛,单边螺栓连接作为一种高效、便捷的连接方式,逐渐受到业界的青睐。H型钢梁、方钢管柱通过T型钢连接件和单边螺栓连接技术形成新型装配式钢框架结构,梁柱节点作为整个框架体系的核心,其抗震性能对整体结构的影响至关重要。为评估单边螺栓T型钢连接梁柱节点在地震过程中的损伤情况,开展了4种不同刚度单边螺栓T型钢连接梁柱节点的拟静力试验。通过试验,获得了单边螺栓T型钢连接梁柱节点的破坏模式、滞回性能和初始转动刚度,分析了不同刚度的T型钢连接件对梁柱节点的破坏模式、抗弯承载能力和转动刚度退化的影响。采用考虑残余变形累积损伤修正的Park-Ang损伤指数模型研究了试验中节点的损伤演化规律,结果表明:所提出的地震损伤模型能够较好地反映单边螺栓T型钢连接梁柱节点的损伤演化过程与破坏程度,为该类梁柱连接节点的优化设计和安全评估提供了理论依据和实践经验。

新型承插式螺栓连接柱-柱节点抗拉性能研究

为实现模块化钢结构单元房间的上下连接,提出一种新型承插式螺栓连接柱-柱节点,以有无注浆、承插深度为参数设计并制作3个足尺节点试件,并对其进行抗拉试验,分析了各节点的破坏形态、应变分布以及承载能力等,探讨了该新型节点的抗拉性能.建立了数值分析模型,进行了轴拉荷载作用下的受力性能参数化分析,研究了承插深度、螺栓直径及内套筒厚度对节点抗拉承载力的影响.基于高强螺栓的抗剪承载力,提出了适用于该新型节点的抗拉承载力计算公式.研究结果表明:该新型节点可将轴向拉力有效传递至高强螺栓,试件破坏时均出现高强螺栓群被剪断,灌浆节点试件发生破坏时,出现钢材与灌浆料界面的黏结破坏及螺栓周围局部灌浆料的压碎;高强螺栓群在拉力荷载作用下呈端部螺栓受剪较大、中心螺栓受剪较小的分布,试件破坏时,各螺栓承受的剪力趋于相等;灌浆节点与无浆节点相比,灌浆料与高强螺栓协同工作性能良好,弹性阶段最大摩擦力平均值提高64.4%,极限抗拉承载力提高14.1%;承插深度由300 mm增至500 mm,节点极限抗拉承载力提高80.9%;承插深度和螺栓直径对节点抗拉承载力影响较大,内套筒厚度对节点抗拉承载力的影响较小;根据提出的节点抗拉承载力计算公式得到的计算值与有限元模拟值吻合良好.

开槽侧板加强型连接梁柱节点子结构抗连续倒塌性能研究

为了优化侧板加强型节点的抗连续倒塌性能,提出了一种开槽侧板加强型梁柱连接节点形式。通过静力加载试验,得到了新型节点子结构的破坏模式、竖向抗力发展机制、应变分布、延性水平和动力承载力等。试验结果表明:钢梁翼缘在盖板附近首先开裂并向腹板外排螺栓中部延伸贯穿,导致竖向承载力快速下降为峰值荷载的20%左右。相比传统侧板加强型和圆弧扩盖板型梁柱节点,新型节点的峰值承载力分别提高了62.1%和19.6%,塑性弦转角分别提高了203.6%和25.8%。通过有限元分析得到了试件的断裂路径发展过程,进一步地通过参数化分析发现:扩大过焊孔构造对改善峰值后塑性弦转角及残余强度提升无明显作用;随着螺栓群远离钢梁翼缘起始断裂位置,最小残余强度比不断增大,但峰值后塑性弦转角呈先增大后减小的趋势;当螺栓群内移45mm时,峰值后塑性弦转角及最小残余强度比分别达到0.149rad和0.88,提高了38.2%和200.8%。